Search NASA⌕ Search

SEARCH · Search NASA

Results for “morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

The morphology and kinematics of the Cep IV star formation region

Rossano et al. (1980) have discussed the morphology and kinematics of Cep IV star formation region. The present investigation is concerned with H2CO observations which have been conducted to examine the relationship between the neutral and ionized gas in the Cep IV star formation region and to study the origin of the unusual kinematics and morphology of the stars, gas, and dust in this region. Six-cm H2CO observations were undertaken throughout a one half degree square area centered on the H II region W1. In addition, VLA observations of the Cep IV region at 6 and 20 cm were also performed. The neutral gas in the vicinity of W1 is found to be located in clouds having velocities of -13, -7, and 1 km/s. The gas at - 7 km/s appears to be undisturbed gas from the original dark cloud complex.

Grayzeck, E. J.↗
NASA NTRS1984

Morphological changes of gamma prime precipitates in nickel-base superalloy single crystals

Changes in the morphology of the gamma prime precipitate were examined during tensile creep at temperatures between 927 and 1038 C in 001-oriented single crystals of a Ni-Al-Mo-Ta superalloy. In this alloy, which has a large negative misfit of -0.80%, the gamma prime particles link together during creep to form platelets, or rafts, which are aligned with their broad faces perpendicular to the applied tensile axis. The dimensions of the gamma and gamma prime phases were measured as directional coarsening developed in an attempt to trace the changing morphology under various stress levels. In addition, the effects of initial microstructure, as well as slight compositional variations, were related to raft development and creep properties. The results showed that directional coarsening of gamma prime began during primary creep, and under certain conditions, continued to develop after the onset of steady-state creep. The length of the rafts increased linearly with time up to a plateau region. The thickness of the rafts, however, remained equal to the initial gamma prime size at least up through the onset of tertiary creep; this is a clear indication of the stability of the finely-spaced gamma-gamma prime lamellar structure. It was found that the single crystals with the finest gamma prime size exhibited the longest creep lives, because the resultant rafted structure had a larger number of gamma-gamma prime interfaces per unit volume of material.

Mackay, R. A.↗
NASA NTRS1984

Morphological stability in the presence of fluid flow in the melt

Recent experiments have shown that the presence of a vertical buoyancy-driven flow adjacent to an initially cylindrical crystal-melt interface may produce a time-dependent helical deformation of the interface, with a rotation period ranging from several minutes to many hours, depending upon the width of the melt. The temperature distribution is such that the interface is expected to be morphologically stable in the absence of fluid flow. A linear stability analysis reveals that the instability is due to a coupling between a basic hydrodynamic instability in the buoyant flow and the deformable boundary separating the two phases. The crystal-melt interface lowers the critical Grashof number of an analogous rigid-walled system by an order of magnitude for succinonitrile with a Prandtl number P = 22.8; furthermore, the hydrodynamic mode that is actually destabilized by the interface is not the least stable mode in the rigid-walled system for P = 22.8. The results show that the instability may be regarded either as a rather large alteration of a basic hydrodynamic instability by the crystal-melt interface, or as a significant modification of the morphological stability of the interface by the presence of the buoyant flow.

Mcfadden, G. B.↗
NASA NTRS1985

Morphological Stability and Fluid Dynamics of Vapor Crystal Growth

A fundamental understanding of the conditions under which crystals can retain morphological stability, i.e., shape stability of the advancing interface, during growth from vapors was studied. Morphological stability (MS) is a necessary condition for the growth of homogeneous single crystals required for numerous device applications. For crystallization from melts, the MS concepts are well developed and are essentially based on heat and mass transfer conditions about the advancing interface. For crystallization from vapors, the MS requirements are more complex and not well understood. The added complexity arises from the fact that anisotropies in interfacial kinetics are typically stronger in crystallization from vapors than from melts. These pronounced anisotropies root in the distinctly lower atomic roughness of most vapor-solid interfaces.

Rosenberger, F.↗
NASA NTRS1985

Morphology of human embryonic kidney cells in culture after space flight

The ability of human embyronic kidney cells to differentiate into small epithelioid, large epithelioid, domed, and fenestrated morphological cell types following space flight is examined. Kidney cells exposed to 1 day at 1 g, then 1 day in orbit, and a 12 minute passage through the electrophoretic separator are compared with control cultures. The data reveal that 70 percent of small epithelioid, 16 percent of large epithelioid, 9 percent of dome-forming, and 5 percent of fenestrated cells formed in the space exposed cells; the distributions correlate well with control data. The formation of domed cells from cells cultured from low electrophoretic mobility fractions and small epithelioid cells from high mobility fractions is unaffected by space flight conditions. It is concluded that storage under microgravity conditions does not influence the morphological differentiation of human embryonic kidney cells in low-passage culture.

Todd, P.↗
NASA NTRS1985

Morphological and physical characteristics of the Virgo Cluster - First results from the Las Campanas photographic survey

Preliminary results are presented of a photographic survey of the Virgo cluster to the faintest convenient limit of the Las Campanas du Pont 2.5 m reflector, performed in order to study the complexity of both the surface and velocity distributions within the central 6 degree radius region. The survey is described and the resulting Catalog is discussed, and the frequency of galaxy types found and listed in the Catalog is described. The physical properties of the dwarfs are summarized, and luminosity functions are given separately for each morphological type. The progressive change of (MBT) faintward along the morphological sequence from Sc I through Sm and Im types is shown, leading to a calibration of the de Vaucouleurs Lambda luminosity index and a determination of its intrinsic dispersion. The preliminary results on the distribution of galaxies of all types in the two principal subclustering regions found are summarized, and the velocity distributions over the face of the 6 degree core are discussed for the various galaxy types.

Sandage, A.↗
NASA NTRS1987

Crater morphology and morphometry on the Uranian satellites

Fresh craters on the icy Uranian satellites exhibit a range of morphologies similar to craters on the icy satellites of Jupiter and Saturn. The general structural features found in the craters are described. Estimates of transition diameters from simple to complex crater morphologies are given for the five large Uranian satellites and 1985U1, and plotted with transition diameters on other bodies against surface gravity. Possible large-scale impacts are discussed.

Croft, Steven K.↗
NASA NTRS1987

Crater ejecta morphology and the presence of water on Mars

The purpose of this contribution is to review the possible effects of projectile, target, and environment on the cratering process. The discussion presented suggests that contradictions in interpreting Martian crater ejecta morphologies reflect oversimplifying the process as a singular consequence of buried water. It seem entirely possible that most ejecta facies could be produced without the presence of liquid water. However, the combination of extraordinary ejecta fluidity, absence of secondaries, and high ejection angles all would point to the combined effects of atmosphere and fluid rich substrates. Moreover, recent experiments revealing the broad scour zone associated with rapid vapor expansion may account for numerous craters in the circum-polar regions with subtle radial grooving extending 10 crater radii away with faint distal ramparts. Thus certain crater ejecta morphologies may yet provide fundamental clues for the presence of unbound water.

Schultz, Peter H.↗
NASA NTRS1987

Boundary effects on Marangoni-Rayleigh and morphological instabilities

Effects of boundaries (vertical sides) on the Marangoni-Rayleigh problem are reviewed. Spectral crowding and a dimensional singularity when Rayleigh effects are neglected are discussed. In the unbounded case, there is a unique Ma with unique eigenfunction for fixed Ra but infinite Ra for fixed Ma. These infinite values of Ra correspond to vertical cellular modes. In the bounded case, there is infinite Ma for a fixed Ra. The stress free side wall case gives double infinite of Ra for fixed Ma and wave number. Clearly, a dimensional singularity occurs for the Marangoni problem when the side walls go to infinity and a fixed Ra is considered. There is no direct analogy regarding this singularity in the morphological instability problem. Results on the behavior of Mac, Rac with boundary conditions also show only marginal connection to the morphological stability problem.

Narayanan, R.↗
NASA NTRS1987

Effects of elevation and ridged plains thicknesses on Martian crater ejecta morphology

Relationships between the distribution of Martian crater ejecta morphologies and both the elevation and ridged plains thicknesses were investigated using individual Viking Orbiter images of 383 craters with uneroded ejecta termini located between +/- 25 deg latitude. Only a slight correlation was found between elevation and the distribution of ejecta types for the ridged plains. A stronger correlation was identified between the thicknesses of Lunae and Hesperia Plana and the complexity of ejecta morphologies. For a given crater size range, the complexity of the ejecta increases with decreasing thicknesses of the ridged plains. Possible explanations for the observed phenomena are discussed.

Horner, V. M.↗
NASA NTRS1988

Numerical simulation of morphological development during Ostwald ripening

The morphological evolution of a small number of particles undergoing Ostwald ripening in two dimensions was investigated using a boundary integral technique. The numerical calculations show that, in many cases, interparticle diffusional interactions do not induce large distortions in particle morphology from a circle, due to the strong local interaction between regions of different curvature on the same particle. Particle migration due to interparticle diffusional interactions was observed, with the migration distance larger than the initial radius of a particle, which is linked to the particle spatial arrangement. As diffusion is the mechanism for the migration, it is expected that particle movement is a generic aspect of the coarsening process at high volume fractions of coarsening phase and, possibly, at low volume fractions. The calculations support unambiguously the Ostwald ripening mechanism for flat formation during liquid-phase sintering. As such, the appearance or regions of low interfacial curvature is a dynamic phenomenon dependent on interparticle diffusion.

Voorhees, P. W.↗
NASA NTRS1988

Flow-induced morphological instabilities - The rotating disc

The morphological stability of a rotating and solidifying disk is investigated under the assumption that delta, the thickness of the viscous boundary layer, is much larger than delta(c), the thickness of the solute boundary layer. It is found that axisymmetric disturbances with wavelengths comparable to delta respond to nonparallel flow effects and have stability characteristics quite different from disturbances in a parallel flow. These long waves are unstable because of the nonparallel flow and would decay without it. This analysis thus identifies a new mechanism of morphological change induced by flow.

Brattkus, K.↗
NASA NTRS1987

Crater ejecta morphology and the presence of water on Mars

The possible effects of projectile, target, and environment on the cratering process is reviewed. It is suggested that contradictions in interpreting Martian crater ejecta morphologies reflect over simplifying the process as a singular consequence of buried water. It seem entirely possible that most ejecta facies could be produced without the presence of liquid water. However, the combination of extraordinary ejecta fluidity, absence of secondaries, and high ejection angles all would point to the combined effects of atmosphere and fluid rich substrates. Moreover, recent experiments revealing the broad scour zone associated with rapid vapor expansion may account for numerous craters in the circumpolar regions with subtle radial grooving extending 10 crater radii away with faint distal ramparts. Thus certain crater ejecta morphologies may yet provide fundamental clues for the presence of unbound water.

Schultz, P. H.↗
NASA NTRS1989

Surface morphologies and electrical properties of molecular beam epitaxial InSb and InAs(x)Sb(1-x) grown on GaAs and InP substrates

Surface morphologies and electrical properties of molecular beam epitaxial InSb and InAs(x)Sb(1-x) grown on GaAs and InP substrates are discussed. The crystals are all n-type at 300 K and lower temperatures. The surface morphology and electrical characteristics are strongly dependent on Sb(4)/In flux ratio and substrate temperature. The highest mobilities in InSb on InP are 70,000 at 300 K and 110,000 cm(2)/V.s (n=3x10(15) cm(-3)) at 77 K. The mobilities in the alloys also increase monotonically with lowering of temperature. Good quality InAs(x)Sb(1-x) was grown directly on InP substrates by molecular beam epitaxy.

Oh, J. E.↗
NASA NTRS1989

Multicolor surface photometry of powerful radio galaxies. II - Morphology and stellar content

Results on the morphology, photometric structure, and colors of 72 powerful radio galaxies (PRGs) are presented. It is found that galaxy interactions and mergers play an important role in the PRG phenomenon. Over 50 percent of the sample galaxies display optical morphological deviations from elliptical symmetry at high levels of surface brightness. About 20 percent of the galaxies have a second nucleus less than 10 kpc in projection from the main nucleus. The fraction of PRGs in a common envelope with neighboring galaxies is even larger. Surface brightness profiles for galaxies with weak or no emission lines are typically shallower in slope than normal radio-quiet elliptical galaxies, but similar to the brightest cluster galaxies. Surface brightness profiles for strong emission (SE) galaxies are more diverse in form. The SE PRGs have unusually blue average colors relative to giant elliptical galaxies. These colors are spatially extended and not merely due to light from a bright nucleus or extended emission-line gas.

Smith, Eric P.↗
NASA NTRS1990

Morphological stability and kinetics in crystal growth from vapors

The following topics are discussed: (1) microscopy image storage and processing system; (2) growth kinetics and morphology study with carbon tetrabromide; (3) photothermal deflection vapor growth setup; (4) bridgman growth of iodine single crystals; (5) vapor concentration distribution measurement during growth; and (6) Monte Carlo modeling of anisotropic growth kinetics and morphology. A collection of presentations and publications of these results are presented.

Rosenberger, Franz↗
NASA NTRS1991

Effect of Polymer Electrode Morphology on Performance of a Lithium/Polypyrrole Battery

A variety of conducting polymer batteries were described in the recent literature. In this work, a Li/Polypyrrole secondary battery is described. The effect of controlling the morphology of the polymer on enhancement of counterion diffusion in the polymer phase is explored. A method of preparing conducting polymers was developed which yields high surface area per unit volume of electrode material. A porous membrane is used as a template in which to electrochemically polymerize pyrrole, then the membrane is dissolved, leaving the polymer in a fibrillar form. Conventionally, the polymer is electrochemically polymerized as a dense polymer film on a smooth Pt disk electrode. Previous work has shown that when the polymer is electrochemically polymerized in fribrillar form, charge transport rates are faster and charge capacities are greater than for dense, conventionally grown films containing the same amount of polymer. The purpose is to expand previous work by further investigating the possibilities of the optimization of transport rates in polypyrrole films by controlling the morphology of the films. The utility of fibrillar polypyrrole as a cathode material in a lithium/polymer secondary battery is then assessed. The performance of the fibrillar battery is compared to the performance of an analogous battery which employed a conventionally grown polypyrrole film. The study includes a comparison of cyclic voltammetry, shape of charge/discharge curves, discharge time and voltage, cycle life, coulombic efficiencies, charge capacities, energy densities, and energy efficiencies.

Nicholson, Marjorie Anne↗
NASA NTRS1991

Randomization of particle motions and the observed morphology of cometary heads

A great diversity is known to exist in the coma morphology of comets. In particular, some comets show much structural detail in their heads (such as jets, halos, fans, plumes, streamers), while others have completely structureless comas. Obvious questions arise as to why is this so and what does the presence or absence of features tell us about the emission processes on cometary nuclei. In an effort to investigate these problems, a computer code that generates synthetic images of dust comets was modified by introducing random perturbations into motions of ejected particles. It is noted that the introduction of perturbations has made the computer generated images simulate the appearance of comets quite faithfully and that by increasing the perturbations beyond a certain limit it has been possible to erase the coma morphology diagnostic of the details of the ejection process. It is proposed that the degree of collimation of an ejecta flow from discrete active sources on the nucleus surface and possible emissions of dust coma. Molecules of comet gases that radiate in the spectral region employed (and whose velocity distribution is much more chaotic than that of dust particles) and limited atmospheric seeing likewise contribute to blurring structural detail in ground-based imaging observation of comets. The absence of discrete features in the coma does no means imply the absence of localized sources of activity on the nucleus.

Sekanina, Zdenek↗