Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Measurement of correlations among net-charge, net-proton, and net-kaon multiplicity distributions in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

Correlations among conserved quantum numbers, such as the net-electric charge, the net-baryon, and the net-strangeness in heavy-ion collisions, are crucial for exploring the QCD phase diagram. In this paper, these correlations are investigated using net-proton number (as a proxy for the net-baryon), net-kaon number (for the net-strangeness), and net-charged particle number in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV with the ALICE detector. The observed correlations deviate from the Poissonian baseline, with a more pronounced deviation at LHC energies than at RHIC. Theoretical calculations of the Thermal-FIST hadron resonance gas model, HIJING, and EPOS LHC event generators are compared with experimental results, where a significant impact of resonance decays is observed. Thermal-FIST calculations under the grand canonical and canonical ensembles highlight significant differences, underscoring the role of local charge conservation in explaining the data. Recent lattice QCD studies have demonstrated that the magnetic field generated by spectator protons in heavy-ion collisions affects susceptibility ratios, in particular those related to the net-electric charge and the net-baryon numbers. The experimental findings are in qualitative agreement with the expectations of lattice QCD.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

All loop scattering for all multiplicity

We study the recently introduced curve integral formalism that defines a new family of formulas for the scattering amplitudes of the colored scalar trϕ 3 theory. We find that the curve integral manifests a very surprising fact about these amplitudes: the dependence on the number of particles, n, and the loop order, L, is effectively decoupled in these formulas. We derive the curve integrals at tree-level for all n. We then show that, for higher loop-order, it suffices to study the curve integrals for L-loop tadpole-like amplitudes, which have just one particle per color trace-factor. By combining these tadpole-like formulas with the tree-level results, we find formulas for the all n amplitudes at L loops. We illustrate this result by giving explicit curve integrals for all the amplitudes in the theory, including the non-planar amplitudes, through to two loops, for all n.

1/N Expansion↗
DOE OSTI2024

Symbiotic bacteriophages exhibit multiple adaptive strategies in activated sludge flocs and contribute to floc stability

Despite the importance of phages for the dynamics and functions of microbial communities, it remains largely unexplored how symbiotic phages adapt in activated sludge systems and influence microbial aggregate stability, which is critical for clarification and reliable performance. Here, based on 12,127 phage contigs recovered from 12 activated sludge microbiomes, the symbiotic phages exhibited broad host ranges and infected dominant prokaryotes in activated sludge. Moreover, these phage communities exhibited high lysogenicity (49% to 66% lysogenic phages) and harbored diverse auxiliary metabolic genes (AMGs) that could enhance microbial aggregate stability, such as genes coding for lipopolysaccharide, peptidoglycan, and extracellular polysaccharide biosynthesis. Additionally, prokaryotic antiviral systems were widely distributed in dominant prokaryotes, particularly the Restriction-Modification (RM) and CRISPR-Cas systems, which could mitigate potential harmful phage infections. Overall, this study reveals the contemporary beneficial relationship between phages and prokaryotic hosts in activated sludge microbiomes and the potential benefits of symbiotic phages on floc stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Higher-order LaSDI: Reduced order modeling with multiple time derivatives

Solving complex partial differential equations (PDEs) is essential across scientific disciplines but often requires numerical models that can be prohibitively expensive in time-sensitive applications. Reduced-order models (ROMs) address this challenge by exploiting low-dimensional structure to create fast approximations. The Latent Space Dynamics Identification (LaSDI) framework has demonstrated success in learning ROMs for parameterized PDE families, but remains limited to first-order systems. Here, in this paper, we propose Higher-Order LaSDI (HLaSDI), which extends the LaSDI framework to PDEs with arbitrary order of time derivatives. This generalization significantly expands the applicability of LaSDI-based methods to systems previously outside their scope, including hyperbolic PDEs. We demonstrate HLaSDI’s accuracy and efficiency on several linear and nonlinear benchmark problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Co-training of multiple neural networks for simultaneous optimization and training of physics-informed neural networks for composite curing

This paper introduces a Physics-Informed Neural Network (PINN) technique that co-trains neural networks (NNs) that represent each function in a system of equations to simultaneously solve equations representing an out-of-autoclave (OOA) cure process while conducting optimization in adherence to process requirements. Specifically, this co-training approach benefits from using NNs to represent OOA inputs (air temperature profile) and outputs (part and tool temperature profiles and degree of cure). Production requirements can then be levied on the inputs, such as maximum air temperature and minimum cure cycle, and simultaneously on the outputs, such as degree of cure, maximum part temperature, and part temperature rate limits. The technique is validated with finite element (FE) simulations and physical experiments for curing a Toray T830H-6 K/3900-2D composite panel. Furthermore, this novel approach efficiently models and optimizes the OOA cure process.

Composite curing↗
DOE OSTI2026

Design and performance assessment of a dual-mode latent thermal storage integrated heat pump across multiple climate zones

The electrification of space cooling and heating systems risks overloading the existing electrical grid during peak hours. Heat pumps integrated with thermal energy storage (HP-TES) offer a promising solution by shifting peak loads to off-peak hours, reducing grid strains. This work presents the design and assessment of a dual-mode HP-TES that uses a single 22°C phase-change material (PCM) as a heat source or sink in heating and cooling modes, respectively. Performance assessment was conducted using Modelica-based transient models, and full-year simulations were conducted across eight US climate zones using typical weather data. Two HP-TES performance metrics: peak energy reduction and recharge energy increases, were defined by comparing HP-TES energy consumption with base HP peak consumptions. Annual heating demand reductions (40–65%) exceeded cooling demand reductions (15–20%) due to the elimination of peak-hour backup heating. Cooling mode recharge energy requirements (0–10%) were reduced in locations with lower summer nighttime temperatures, while heating recharge requirements were lower than the high base-peak energy demand from backup heating. Simplified rapid methods that were 10 7 times faster than annual simulations were developed to predict seasonal cooling and heating energy reductions, and recharge energy requirements, with maximum deviations of ±2.5% and ±3.5% points. These methods enabled rapid parametric studies that identified optimal location-specific PCM temperatures between 22°C and 27°C, highlighting the need to consider both discharge and recharge energy requirements to achieve sustainable, energy-efficient peak load shifting across various climate zones.

25 ENERGY STORAGE↗
DOE OSTI2024

Reassessing the proposed “CY chondrites”: Evidence for multiple meteorite types and parent bodies from Cr-Ti-H-C-N isotopes and bulk elemental compositions

Here, we report a coordinated bulk Cr-Ti-H-C-N isotopic and compositional study of six carbonaceous chondrites from Antarctica that are often considered to be related and termed Yamato-like carbonaceous (CY) chondrites. These meteorites are known to have undergone extensive aqueous alteration followed by different degrees of thermal alteration, to be similar to one another in regard to mineralogy, and share affinities with both the Ivuna-like carbonaceous (CI) and Mighei-like carbonaceous (CM) chondrites. While mineralogically similar, a key difference among these samples is that chondrules have been found in some of these samples, but not in others. The aim of this study is to evaluate the relationship of these meteorites to one another, and investigate how they relate to the CI and CM chondrite groups. We find that with the addition of the isotopic compositions of these ‘CY’ chondrites, there is now a continuum of isotopic compositions among the carbonaceous chondrites. The CI chondrites are no longer separate in O isotopic compositions from the other carbonaceous chondrite groups in plots of Cr-O and Ti-O. We also find that the ‘CY’ chondrites represent two distinct populations, which correlate with their heating stage. However, the peak temperatures experienced by each population can only explain the differences in H and C isotopes and abundances and N abundances between samples, and cannot have caused the differences in N, Cr, and Ti isotopes, or all the volatile element depletions of the sample’s bulk compositions. Instead, we conclude that the compositional and isotopic data of these two populations correlate with their known chondrule abundances, indicating distinct precursors for each population. We find it most likely that these samples originate from two distinct asteroids, implying that among the six samples studied here, there are not five related samples to constitute a new meteorite group. The chondrule-free heating Stage III samples are most likely heated CI chondrites, while the chondrule-bearing heating Stage IV samples could be heated CM chondrites.

58 GEOSCIENCES↗
DOE OSTI2025

Expanded method for the determination of burnup in nuclear fuels using multiple neodymium isotopes

Established methods for the determination of burnup in nuclear fuels commonly rely on the measurement of 148Nd in the spent fuel in concert with known fission product yields to determine the atom percent of fissions in the fuel. This isotope of neodymium is used for various reasons, including chemical and radioactive stability, ease of measurement, and low rates of formation and destruction due to neutron flux apart from fission. However, careful calculation of effective cumulative fission yields and correction factors for (n,γ) capture reactions allows for additional stable and long-lived isotopes of neodymium to be used to provide additional independent measurements of burnup, reducing statistical uncertainty. This method was developed and successfully applied to measure the burnup of compacts from the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. The mean burnup measured using 143Nd, 145Nd, 146Nd, 148Nd, and 150Nd was statistically observed to be the same as that measured using 148Nd alone, but the statistical uncertainty in the measurement was reduced by a factor of 2, providing a tighter confidence interval in the final results.

Helmreich, Grant [ORNL] (ORCID:0000000330464394)↗
DOE OSTI2025

Control of wakefield in sub-THz dielectric-lined waveguides using multiple-bunch excitation

Beam-driven wakefield accelerators offer the potential to achieve accelerating fields approaching the sub-GV/m range, paving the way for compact and cost-effective next-generation high-energy colliders. This method typically employs a two-bunch system: a drive bunch that excites an electromagnetic wakefield in a solid-state or plasma medium, and a witness bunch that extracts energy from the wake for acceleration. Our research focuses on two key challenges in wakefield acceleration using structures. First, we investigate strategies to suppress transverse instabilities by employing non-cylindrical geometries that damp dipole modes. Second, we explore methods to precisely terminate the wakefield after the interaction region, thereby improving the efficiency of energy transfer. This paper presents detailed simulation results and the corresponding experimental design developed to validate these concepts. Furthermore, the proposed experiment will be carried out at the Argonne Wakefield Accelerator (AWA) facility, focusing on controlling wakefield duration through tailored drive and witness bunch configurations and evaluating dielectric-lined structures with non-cylindrical cross sections.

43 PARTICLE ACCELERATORS↗