Search NASA⌕ Search

SEARCH · Search NASA

Results for “occupancy estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Innovations in Sensors and Controls for Building Energy Management: Research and Development Opportunities Report for Emerging Technologies

Sensors, actuators, and controllers, which collectively serve as the backbone of cyberphysical systems for building energy management, are one of the core technical areas of investment for achieving the U.S. Department of Energy (DOE) Building Technologies Office's (BTO's) goals for energy affordability in the national building stock - both commercial and residential. In fact, an aggregated annual energy savings of 29% is estimated in the commercial sector alone through the implementation of efficiency measures using current state-of-the-art sensors and controls to retune buildings by optimizing programmable settings based on occupant schedules and comfort requirements, as well as detecting and diagnosing equipment operation and installation problems (Fernandez et al. 2017). Monitoring and control of building conditions and operations has advanced significantly, from the invention of the modern thermostat just before the start of the 20th century to the midcentury incorporation of direct digital control into devices, the introduction of open protocols and network communications at the end of the century, and finally the invention of cloud-based computing and additional advancements that have enabled remote operation and a proliferation of connected and intelligent devices in building automation. Despite this potential, however, two main challenges hinder widespread adoption of sensors and controls in building operations that can ensure savings for high-efficiency components and equipment (e.g., heat pumps, windows, and lighting devices), as well as additional savings from more sophisticated control architectures and algorithms. energy savings of 29% is estimated in the commercial sector alone through the implementation of efficiency measures using current state-of-the-art sensors and controls to retune buildings by optimizing programmable settings based on occupant schedules and comfort requirements, as well as detecting and diagnosing equipment operation and installation problems (Fernandez et al. 2017). Monitoring and control of building conditions and operations has advanced significantly, from the invention of the modern thermostat just before the start of the 20th century to the midcentury incorporation of direct digital control into devices, the introduction of open protocols and network communications at the end of the century, and finally the invention of cloud-based computing and additional advancements that have enabled remote operation and a proliferation of connected and intelligent devices in building automation. Despite this potential, however, two main challenges hinder widespread adoption of sensors and controls in building operations that can ensure savings for high-efficiency components and equipment (e.g., heat pumps, windows, and lighting devices), as well as additional savings from more sophisticated control architectures and algorithms.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Likelihood non-Gaussianity in large-scale structure analyses

The standard present-day large-scale structure (LSS) analyses make a major assumption in their Bayesian parameter inference – that the likelihood has a Gaussian form. For summary statistics currently used in LSS, this assumption, even if the underlying density field is Gaussian, cannot be correct in detail. We investigate the impact of this assumption on two recent LSS analyses: the Beutler et al. power spectrum multipole ($P_ℓ$) analysis and the Sinha et al. group multiplicity function ($ζ$) analysis. Using non-parametric divergence estimators on mock catalogues originally constructed for covariance matrix estimation, we identify significant non-Gaussianity in both the $P_ℓ$ and $ζ$ likelihoods. We then use Gaussian mixture density estimation and independent component analysis on the same mocks to construct likelihood estimates that approximate the true likelihood better than the Gaussian pseudo-likelihood. Using these likelihood estimates, we accurately estimate the true posterior probability distribution of the Beutler et al. and Sinha et al. parameters. Likelihood non-Gaussianity shifts the fσ8 constraint by -0.44σ, but otherwise does not significantly impact the overall parameter constraints of Beutler et al. For the $ζ$ analysis, using the pseudo-likelihood significantly underestimates the uncertainties and biases the constraints of the Sinha et al. halo occupation parameters. For log $M_1$ and α, the posteriors are shifted by +0.43σ and -0.51σ and broadened by 42 per cent and 66 per cent, respectively. The divergence and likelihood estimation methods we present provide a straightforward framework for quantifying the impact of likelihood non-Gaussianity and deriving more accurate parameter constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

The impact of simplified window and exhaust fan assumptions on indoor air quality in multifamily buildings

In residential buildings, the indoor air quality can be significantly affected by ventilation measures initiated by occupants, including the operation of windows and in-unit exhaust fans in kitchens and bathrooms. Many simulations simplify these factors by disregarding window opening behaviors and using fixed schedules for exhaust fan operation across all residential units. To estimate the impact of these simplifications in the U.S. context, this study used coupled CONTAM and EnergyPlus models to simulate airflow and contaminant transport in multifamily buildings. The coupled models parametrically varied climate zone, building airtightness, and mechanical ventilation system types. The study conducted a sensitivity analysis on two key occupant behaviors: (1) operating kitchen and bathroom exhausts on different schedules in individual dwelling units, and (2) scheduling open windows on ground and top floors. The simplified assumptions (i.e. uniform in-unit exhaust fan operation and window operation) had a minimal impact on inter-unit air flow and contaminant transport simulations across a broad range of building air leakage and mechanical ventilation system types. These findings suggest that for buildings with tight construction it is reasonable for most modelling and simulation efforts to ignore the effects of non-uniform exhaust fan operation and window opening.

Occupant behavior↗

Side-by-Side Field Evaluation of Highly Insulating Windows in the PNNL Lab Homes

To examine the energy, air leakage, and thermal performance of highly insulating windows, a field evaluation was undertaken in a matched pair of all-electric, factory-built “Lab Homes” located on the Pacific Northwest National Laboratory (PNNL) campus in Richland, Washington. The “baseline” Lab Home B was retrofitted with “standard” double-pane clear aluminum-frame slider windows and patio doors, while the “experimental” Lab Home A was retrofitted with Jeld-Wen® triple-pane vinyl-frame slider windows and patio doors with a U-factor of 0.2 and solar heat gain coefficient of 0.19. To assess the window, the building shell air leakage, energy use, and interior temperatures of each home were compared during the 2012 winter heating and summer cooling seasons. The measured energy savings in Lab Home B averaged 5,821 watt-hours per day (Wh/day) during the heating season and 6,518 Wh/day during the cooling season. The overall whole-house energy savings of Lab Home B compared to Lab Home A are 11.6% ± 1.53% for the heating season and 18.4 ± 2.06% for the cooling season for identical occupancy conditions with no window coverings deployed. Extrapolating these energy savings numbers based on typical average heating degree days and cooling degree days per year yields an estimated annual energy savings of 12.2%, or 1,784 kWh/yr. The data suggest that highly insulating windows are an effective energy-saving measure that should be considered for high-performance new homes and in existing retrofits. However, the cost effectiveness of the measure, as determined by the simple payback period, suggests that highly insulating window costs continue to make windows difficult to justify on a cost basis alone. Additional reductions in costs via improvements in manufacturing and/or market penetration that continue to drive down costs will make highly insulating windows much more viable as a cost-effective energy efficiency measure. This study also illustrates that highly insulating windows have important impacts on peak load, occupant comfort, and condensation potential, which are not captured in the energy savings calculation. More consistent and uniform interior temperature distributions suggest that highly insulated windows, as part of a high performance building envelope, may enable more centralized duct design and downsized HVAC systems. Shorter, more centralized duct systems and smaller HVAC systems to yield additional cost savings, making highly insulating windows more cost effective as part of a package of new construction or retrofit measures which achieve significant reductions in home energy use.

PNNL Lab Homes↗

Hyper Suprime-Cam Year 3 results: Cosmology from galaxy clustering and weak lensing with HSC and SDSS using the emulator based halo model

We present cosmology results from a blinded joint analysis of cosmic shear, galaxy-galaxy weak lensing, and projected galaxy clustering, measured from the Hyper Suprime-Cam three-year (HSC-Y3) shape catalog and the Sloan Digital Sky Survey (SDSS) DR11 spectroscopic galaxy catalog—a cosmology analysis. We define luminosity-cut, and therefore nearly volume-limited, samples of SDSS galaxies to serve as the tracers of w p and as the lens samples for Δ⁢Σ in three spectroscopic redshift bins spanning the range 0.15± and Δ⁢Σ measurements, we use a single sample of about seven million source galaxies over 416 deg 2 , selected from HSC-Y3 based on having photometric redshifts (photo-z) greater than 0.75. The deep, high-quality HSC-Y3 data enable significant detections of the Δ⁢Σ signals, with integrated signal-to-noise ratio S/N~24 in the range 3≤R/[ℎ –1 Mpc]≤30 over the three lens samples. ξ ± has S/N ~19 in the range 8' ≤$\theta$ ≤5⁢0' and 30' ≤$\theta$ ≤15⁢0' for ξ + and ξ – , respectively. For cosmological parameter inference, we use the dark emulator package, combined with a halo occupation distribution prescription for the relation between galaxies and halos, to model w p and Δ⁢Σ down to quasinonlinear scales, and we estimate cosmological parameters after marginalizing over nuisance parameters. In our baseline analysis we employ an uninformative flat prior of the residual photo-z error, given by Π⁡(Δz ph )=$U$⁡(–1,1), to model a residual bias in the mean redshift of HSC source galaxies. Comparing the relative lensing amplitudes for Δ⁢Σ in the three redshift bins and for ξ ± with the single HSC source galaxy sample allows us to calibrate the photo-z parameter Δ⁢z ph to the precision of σ⁡(Δ⁢z ph )≃0.09. With these methods, we obtain a robust constraint on the cosmological parameters for the flat Λ⁢CDM model: S 8 =σ 8 ⁢(Ω m /0.3) 0.5 =$0.763^{+0.040}_{–0.036}$, or the best-constrained parameter given by $S^{'}_{8}$ = σ 8 ⁢(Ω m /0.3) 0.22 =0.721±0.028, determined with about 4% fractional precision. Based on multidimensional tension metrics, HSC-Y3 data exhibits about 2.5σ tension with the cosmological constraint inferred by Planck for the Λ⁢CDM model, and hints at a nonzero residual photo-z bias implying that the true mean redshift of the HSC galaxies at z ≳0.75 is higher than that implied by the original photo-z estimates.

79 ASTRONOMY AND ASTROPHYSICS↗

Coherence-mediated quantum thermometry in a hybrid circuit quantum electrodynamics architecture

Quantum thermometry plays a critical role in the development of low-temperature sensors and quantum information platforms. Here, in this work, we propose and analyze a hybrid circuit quantum electrodynamics architecture in which a superconducting qubit is dispersively coupled to two distinct bosonic modes: one initialized in a weak coherent state as a phase reference and information buffer and the other coupled to a thermal environment. We show that the qubit serves as a sensitive readout of the probe mode, mapping the interplay between thermal and coherent photon-number fluctuations onto measurable dephasing. This coherence-mediated mechanism enables improved sensitivity to thermal energy fluctuations in the sub-millikelvin regime through Ramsey interferometry. We derive analytic expressions for the probe coherence envelope, compute the quantum Fisher information for temperature estimation, and demonstrate numerically that the presence of a coherent reference enhances the qubit's sensitivity to small changes in thermal photon occupancy. Our results establish a coherence-enabled approach to thermometry and provide a scalable platform for future calorimetric sensing in high-energy physics and quantum metrology.

Zhu, Shaojiang [Fermi National Accelerator Laborat↗

Estimating Fallout Building Attributes from Architectural Features and Global Earthquake Model (GEM) Building Descriptions

A nuclear explosion has the potential to injure or kill tens to hundreds of thousands (or more) of people through exposure to fallout (external gamma) radiation. Existing buildings can protect their occupants (reducing fallout radiation exposures) by placing material and distance between fallout particles and individuals indoors. Prior efforts have determined an initial set of building attributes suitable to reasonably assess a given building’s protection against fallout radiation. The current work provides methods to determine the quantitative values for these attributes from (a) common architectural features and data and (b) buildings described using the Global Earthquake Model (GEM) taxonomy. These methods will be used to improve estimates of fallout protection for operational US Department of Defense (DoD) and US Department of Energy (DOE) consequence assessment models.

42 ENGINEERING↗

Assessing Occupant and Outdoor Air Impacts on Indoor Air Quality in New California Homes

In 2008 the State of California adopted new building codes that required the use of mechanical ventilation systems in homes that meet the requirements of ASHRAE Standard 62.2. The standard requires both a dwelling unit mechanical ventilation system and exhaust fans in kitchens and bathrooms. A field study was undertaken to evaluate the IAQ and ventilation performance of homes built to these requirements. For ventilation system performance, the airflows of all mechanical ventilation systems were measured and their use was monitored for a one-week period. To evaluate IAQ, key pollutants were measured indoors and outdoors during the week, and occupants completed satisfaction surveys. The key pollutants included: formaldehyde, humidity, PM2.5 and NO2. Passive samplers were used to determine average concentrations for the week. Active samplers were used to develop time-series results that can be used to correlate pollutant concentrations with occupant activities. Other ventilation/IAQ related parameters were also recorded, such as stove top temperatures to indicate cooking, exterior door contact switches to know when large openings were being used for ventilation and sensors to determine when clothes dryers were being used. The building envelope and duct leakage were measured to enable estimates of infiltration and duct leakage effects. This paper presents an overview of the test procedures and preliminary results from several homes. The results show that although average concentrations may be reasonable compared to available standards (with the exception of formaldehyde), occupants have a strong impact on pollutant variability and source strength and that outdoor concentrations cannot be ignored. Overall, these mechanically ventilated homes have reasonable IAQ. The homes and duct systems are moderately tight, though not excessively so, by US standards. Significant concerns have been expressed regarding compliance with the ventilation requirements in the California building code. However, almost all the ventilation systems in this study complied with the ventilation air flow requirements and on average were significantly higher than the minimum required air flow rates.

Walker, IS↗

Estimate of Fuel Consumption and GHG Emission Impact on an Automated Mobility District: Preprint

This study estimates the range of fuel and emissions impact of an automated-vehicle (AV) based transit system that services campus-based developments, termed an automated mobility district (AMD). The study develops a framework to quantify the fuel consumption and greenhouse gas (GHG) emission impacts of a transit system comprised of AVs, taking into consideration average vehicle fleet composition, fuel consumption/GHG emission of vehicles within specific speed bins, and the average occupancy of passenger vehicles and transit vehicles. The framework is exercised using a previous mobility analysis of a personal rapid transit (PRT) system, a system which shares many attributes with envisioned AV-based transit systems. Total fuel consumption and GHG emissions with and without an AMD are estimated, providing a range of potential system impacts on sustainability. The results of a previous case study based of a proposed implementation of PRT on the Kansas State University (KSU) campus in Manhattan, Kansas, serves as the basis to estimate personal miles traveled supplanted by an AMD at varying levels of service. The results show that an AMD has the potential to reduce total system fuel consumption and GHG emissions, but the amount is largely dependent on operating and ridership assumptions. The study points to the need to better understand ride-sharing scenarios and calls for future research on sustainability benefits of an AMD system at both vehicle and system levels.

33 ADVANCED PROPULSION SYSTEMS↗

Urinary concentrations of environmental phenols and their association with type 2 diabetes in a population in Jeddah, Saudi Arabia

Highlights: • 23 phenolic endocrine disruptors were measured in urine from diabetic and control populations. • Age and smoking status showed positive associations with type 2 diabetes. • Parabens, bisphenols and benzophenone were associated with increased risk for diabetes. • The order of chemicals associated with diabetes was 4-OH-BP>BPA>BPF>EtP> 4-HB>MeP ≈ PrP. A few epidemiologic studies suggest that exposure to bisphenol A (BPA) is associated with type 2 diabetes mellitus (T2DM). However, little is known about association between other phenolic endocrine disrupting chemicals (EDCs) and T2DM. In this case-control study, we measured urinary concentrations of 23 phenolic EDCs in 101 individuals from Jeddah, Saudi Arabia, to examine the association of parabens, antimicrobials, bisphenols, benzophenones and bisphenol A diglycidyl ethers with T2DM. Urine samples were collected from 54 T2DM cases and 47 non-diabetic individuals (controls), aged 28–68 years old, during 2015–2016. Unconditional logistic regression was performed to estimate odd ratios (ORs) for the association between diabetes and EDC exposures after adjusting for confounders including age, gender, nationality, smoking status and occupation. Age from 40 to 59 years (OR 5.56, 95% CI 2.20–14.0) and smoking status (OR 2.92, 95% CI 1.25–6.79) showed significant positive associations with T2DM. After adjusting for potential confounders, we found that T2DM cases had high urinary levels of parabens (i.e., methyl- (MeP), ethyl- (EtP), propyl- (PrP) and 4-hydroxy benzoic acid (4-HB)), bisphenols (i.e., bisphenols A (BPA) and F (BPF)), and benzophenone (i.e., 4-hydroxybenzophenone (4-OH-BP)) relative to the controls. Individuals in the 4th quartile for urinary concentrations of MeP, EtP, PrP, 4-HB and BPF and in the 3rd quartile for BPA and 4-OH-BP showed over a 6-fold increase in the odds of having diabetes compared with those in the first quartile. Overall, our study shows that urinary levels of multiple phenolic EDCs were associated with increased risk for diabetes. Further prospective studies are required to verify these associations.

54 ENVIRONMENTAL SCIENCES↗

Learning-Based Demand Response in Grid Interactive Buildings via Gaussian Processes

This paper presents a predictive controller for a grid-interactive multi-zone building where the temperature dynamics are learned via Gaussian Process (GP) regression. We investigate the development of a learning-based predictive control with two main objectives: (i) continuously learn the temperature dynamics of the building based on data; and, (ii) use the learned dynamics to solve a multi-objective predictive control problem to guarantee occupants' comfort and energy efficiency during normal conditions and demand response events. We leverage the probabilistic non-parametric properties of GPs to estimate the (unknown) non-linear temperature dynamics of the building and to incorporate the uncertainty of those predictions in a multi-objective optimization problem. The GP-based predictive control is solved via a zero-order primal-dual projected-gradient algorithm. We evaluate numerically the performance of the proposed controller using a five-zone commercial building.

demand response↗

Pore occupancy of gas hydrate

Methane hydrate deposits are one of the largest fractions of hydrocarbons in the Earth's crust. They are found mainly in ocean sediments, and the configuration of the deposits—at the largest (kilometer) and smallest (micrometer) scales—determines how and when gaseous methane is released. Here, in this work, using thermodynamic arguments, we show how the confined spaces of the sediment allow methane hydrate to coexist with both water and gas to create a three-phase region. We find that the hydrate pore occupancy changes depending on the depth of the three-phase region, due to changes in methane density of the gas phase. We estimate the thickness of three-phase regions (hydrate, gas, and water) within ocean sediments. We further show how this directly predicts how the presence of hydrate affects the flow properties of gaseous methane and water through porous media.

flows in porous media↗

Genotoxic Effects of Low- and High-LET Radiation on Human Epithelial Cells Grown in 2-D Versus 3-D Culture

Risk estimation for radiation-induced cancer relies heavily on human epidemiology data obtained from terrestrial irradiation incidents from sources such as medical and occupational exposures as well as from the atomic bomb survivors. No such data exists for exposures to the types and doses of high-LET radiation that will be encountered during space travel; therefore, risk assessment for space radiation requires the use of data derived from cell culture and animal models. The use of experimental models that most accurately replicate the response of human tissues is critical for precision in risk projections. This work compares the genotoxic effects of radiation on normal human epithelial cells grown in standard 2-D monolayer culture compared to 3-D organotypic co-culture conditions. These 3-D organotypic models mimic the morphological features, differentiation markers, and growth characteristics of fully-differentiated normal human tissue and are reproducible using defined components. Cultures were irradiated with 2 Gy low-LET gamma rays or varying doses of high-LET particle radiation and genotoxic damage was measured using a modified cytokinesis block micronucleus assay. Our results revealed a 2-fold increase in residual damage in 2 Gy gamma irradiated cells grown under organotypic culture conditions compared to monolayer culture. Irradiation with high-LET particle radiation gave similar results, while background levels of damage were comparable under both scenarios. These observations may be related to the phenomenon of "multicellular resistance" where cancer cells grown as 3-D spheroids or in vivo exhibit an increased resistance to killing by chemotherapeutic agents compared to the same cells grown in 2-D culture. A variety of factors are likely involved in mediating this process, including increased cell-cell communication, microenvironment influences, and changes in cell cycle kinetics that may promote survival of damaged cells in 3-D culture that would otherwise die or be rendered reproductively inactive in 2-D culture.

Patel, Z. S.↗

Mg/2+/-Fe/2+/ order-disorder in cummingtonite, /Mg, Fe/7Si8O22/OH/2 - A new geothermometer.

Determination of the temperature dependence of the Mg(2+)-Fe(2+) distribution between the M4 site and the M1, M2 and M3 sites in magnesium-rich cummingtonites by Fe-57 Mossbauer resonance spectroscopy. For the basic reversible ion-exchange reaction involved, the Gibbs free energy is estimated to be 3.6 to 4.1 kcal/mole, assuming an ideal solution model at each set of sites. The crystallization temperatures of two cummingtonite-bearing metamorphosed ultrabasic rocks are estimated to be 265 and 290 deg C. The Mossbauer resonance spectra are found to be an effective basis for detecting changes in site occupancies as a function of temperature.

Ghose, S.↗

Effects of aircraft noise on flight and ground structures

Acoustic loads measured on jet-powered STOL configurations are presented for externally blown and upper surface blown flap models ranging in size from a small laboratory model up to a full-scale aircraft model. The implications of the measured loads for potential acoustic fatigue and cabin noise are discussed. Noise transmission characteristics of light aircraft structures are presented. The relative importance of noise transmission paths, such as fuselage sidewall and primary structure, is estimated. Acceleration responses of a historic building and a residential home are presented for flyover noise from subsonic and supersonic aircraft. Possible effects on occupant comfort are assessed. The results from these three examples show that aircraft noise can induce structural responses that are large enough to require consideration in the design or operation of the aircraft.

Mixson, J. S.↗

Size estimation of complexes consisting of hairpin DNAs bound to an assembler-strand

In connection with a model of a primitive translation based entirely on nucleic acids the structural requirements and interactions of small nucleic acids were studied. As shown previously hairpins bind to a complementary single-strand by base pairs of their loop nucleotides if the loop contains at least five nucleotides (Baumann et al 1987). Here, the question is approached to which degree a single-strand, the assembler-strand, is occupied with hairpin molecules. A gapless occupation would allow the close proximity necessary for the assumed peptide bond formation by hairpins bearing an amino acid at their 3'-end. Oligo(dC)(sub n), n = 12, 15, 18, and the investigated hairpins form complexes which are detectable under nondenaturing electrophoretic conditions. The size range is estimated to be 3-4 hairpin molecules to one assembler molecule when oligo(dC)(sub n), n = 15, 18, is used. Due to the limitation of the method, dependence of the migration velocity on the shape which is unique and thus limits the use of marker nucleic acids, and due to the uncertainty if the ends of the assembler form base pairs, a gapless occupation of the assembler is conceivable but not proven.

Baumann, Ulrich↗

nbodykit: An Open-source, Massively Parallel Toolkit for Large-scale Structure

We present nbodykit, an open-source, massively parallel Python toolkit for analyzing large-scale structure (LSS) data. Using Python bindings of the Message Passing Interface, we provide parallel implementations of many commonly used algorithms in LSS. nbodykit is both an interactive and scalable piece of scientific software, performing well in a supercomputing environment while still taking advantage of the interactive tools provided by the Python ecosystem. Existing functionality includes estimators of the power spectrum, two- and three-point correlation functions, a friends-of-friends grouping algorithm, mock catalog creation via the halo occupation distribution technique, and approximate N-body simulations via the FastPM scheme. The package also provides a set of distributed data containers, insulated from the algorithms themselves, that enables nbodykit to provide a unified treatment of both simulation and observational data sets. nbodykit can be easily deployed in a high-performance computing environment, overcoming some of the traditional difficulties of using Python on supercomputers. We provide performance benchmarks illustrating the scalability of the software. The modular, component-based approach of nbodykit allows researchers to easily build complex applications using its tools. The package is extensively documented at http://nbodykit.readthedocs.io, which also includes an interactive set of example recipes for new users to explore. As open-source software, we hope nbodykit provides a common framework for the community to use and develop in confronting the analysis challenges of future LSS surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

MO-F-CAMPUS-I-02: Occupational Conceptus Doses From Fluoroscopically-Guided Interventional Procedures

Purpose: The aim of this method was to provide dosimetric data on conceptus dose for the pregnant employee who participates in fluoroscopically-guided interventional procedures. Methods: Scattered air-kerma dose rates were obtained for 17 fluoroscopic projections involved in interventional procedures. These projections were simulated on an anthropomorphic phantom placed on the examination table supine. The operating theater was divided into two grids relative to the long table sides. Each grid consisted of 33 cells spaced 0.50 m apart. During the simulated exposures, at each cell, scatter air-kerma rate was measured at 110 cm from the floor i.e. at the height of the waist of the pregnant worker. Air-kerma rates were divided by the dose area product (DAP) rate of each exposure to obtain normalized data. For each projection, measurements were performed for 3 kVp and 3 filtration values i.e. for 9 different x-ray spectra. All measurements were performed by using a modern C-arm angiographic system (Siemens Axiom Artis, Siemens, Germany) and a radiation meter equipped with an ionization chamber. Results: The results consist of 153 iso-dose maps, which show the spatial distribution of DAP-normalized scattered air-kerma doses at the waist level of a pregnant worker. Conceptus dose estimation is possible using air-kerma to embryo/fetal dose conversion coefficients published in a previous study (J Cardiovasc Electrophysiol, Vol. 16, pp. 1–8, July 2005). Using these maps, occupationally exposed pregnant personnel may select a working position for a certain projection that keeps abdominal dose as low as reasonably achievable. Taking into consideration the regulatory conceptus dose limit for occupational exposure, determination of the maximum workload allowed for the pregnant personnel is also possible. Conclusion: Data produced in this work allow for the anticipation of conceptus dose and the determination of the maximum workload for a pregnant worker from any fluoroscopically-guided interventional procedure. This study was supported by the Greek Ministry of Education and Religious Affairs, General Secretariat for Research and Technology, Operational Program ‘Education and Lifelong Learning’, ARISTIA (Research project: CONCERT)

60 APPLIED LIFE SCIENCES↗