Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical binary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Earth-Based Ring Occultation to the PDS Rings Node

The major task of this work has been to collect, document, and translate a wide variety of occultation data sets to a common format. This work has been completed. Table I lists the 1977-1987 Uranus occultation data sets that have been retrieved and which are ready for conversion to the PDS occultation standard format, once it has been standardized. The primary documentation and original data tapes for these occultations are part of the MIT data archive, and will be submitted to the PDS from MIT. I have been in contact with Jim Elliot and Steve McDonald, who are carrying out this work, and they have informed me that some of the original data tapes have bad blocks in them. As called upon, I will continue to provide the MIT group with whatever information they require in order that the most complete versions of the data sets be provided to the PDS. 2. All data sets from MIT NOVA disk platters were transcribed to Exabyte tapes, and software was written to enable the NOVA binary data formats to be converted to IEEE standard format. The number of these files which will be contributed to the PDS will depend on the success of the MIT group in reading the original data tapes for the events recorded on these disk platters. As needed, I will supply the MIT group with translated versions of these salvaged files for submission to the PDS. 3. The imaging observations from McDonald and Lick Observatories have been calibrated in both radius and optical depth, and are available in simple binary format. 4. Final submission of the Uranus ring data sets to the PDS is awaiting final agreement by the Rings Node Advisory Council on the PDS FITS format to be adopted for occultation data set.

French, Richard G.↗

Radio and X-ray observations of GX 339-4

Observations of the Galactic black hole candidate binary system GX 339-4 at radio, optical and X-ray wavelengths are reviewed. The radio observations reveal a compact, persistent and variable source. On the average, the radio intensity is less than 10 mJy. These data, when compared with previous data, indicate no set correlation between the radio and X-ray emission. The X-ray intensity suggests a 14.5 month cycle. The latest radio observational data are presented together with X-ray data and are discussed in the context of similar correlated observations from other X-ray binaries.

Sood, R.↗

The interpretation of optical light variations of Centaurus X-3

The interpretation of optical light variations of X-ray binaries is discussed for the case of negligible reflection effect. The limiting cases of synchronous rotation of the visible star (Roche configuration) and of no rotation (pure tidal deformation) are considered. The theoretical results are compared with the available light curves of Cen X-3. X-ray data of the Copernicus satellite are used to get an impression of the atmospheric structure of the outer layers of the visible component. It is shown, that the X-ray eclipse duration is in good agreement with the mass ration derived from the optical variations. The X-ray eclipse duration is discussed with respect to the extended low states, and a possible correlation of the extended lows with the appearance of the optical light curves is considered.

Mauder, H.↗

Dynamic Excitonic Beam Switching with Atomically‐Thin Binary Blazed Gratings

Abstract Beam steering metasurfaces are ultra‐compact optical coatings that offer on‐demand redirection of optical power to specific diffraction orders. To achieve this, spatial gradients are commonly introduced in the phase of light scattered by plasmon or Mie resonant nanoparticles within the metasurface grating's unit cell. However, these phase gradients are oftentimes difficult to tune post‐fabrication. Recently, excitons in monolayer 2D semiconductors have emerged as a new metasurface building block, due to their strong and electrically‐tunable resonant light‐matter interaction. These 2D excitonic metasurfaces offer the tantalizing prospect of beam switching within a single monolayer. Here, it is demonstrated how the 2D analog of binary blazed gratings enables such beam switching by mere nanopatterning of a large monolayer WS 2 , even though nanoscale ribbons of WS 2 do not support geometrical resonances. By introducing a gradient in the nanoribbon width within the metasurface unit cell, an amplitude gradient combined with a small phase gradient in the scattered fields results in asymmetric diffraction efficiencies. Using a scattered‐field analysis, it is shown that these gradients can be further engineered via interference effects with the substrate reflection. Finally, the electrical tunability of the exciton resonance is leveraged to achieve selective and dynamic beam switching with an atomically‐thin metasurface.

Guarneri, Ludovica [Van der Waals‐Zeeman Institute↗

The Accretion Disk of the Lithium-Depleted Young Binary St 34

We presented the infrared spectrum of the young binary system St 34 obtained with the Infrared Spectrograph (IRS) on the Spitzer Space Telescope. The IRS spectrum clearly shows excess dust emission, consistent with the suggestion of White & Hillenbrand that St 34 is accreting from a circumbinary disk. The disk emission of St 34 is low in comparison with the levels observed in typical T Tauri stars; silicate features at 10 and 20 microns are much weaker than typically seen in T Tauri stars; and excess emission is nearly absent at the shortest wavelengths observed. These features of the infrared spectrum suggest substantial grain growth (to eliminate silicate features) and possible settling of dust to the disk midplane (to reduce the continuum excess emission levels), along with a relatively evacuated inner disk, as expected due to gravitational perturbations by the binary system. Although the position of St 34 in the H-R diagram suggests an age of 8f Myr, assuming that it lies at the distance of the Taurus-Auriga molecular clouds, White & Hillenbrand could not detect any Li I absorption, which would indicate a Li depletion age of roughly 25 Myr or more. We suggest that St 34 is closer than the Taurus clouds by about 30-40 pc and has an age roughly consistent with Li depletion models. Such an advanced age would make St 34 the oldest known low-mass pre-main-sequence object with a dusty accretion disk. The persistence of optically thick dust emission well outside the binary orbit may indicate a failure to make giant planets that could effectively remove dust particles.

Hartmann, Lee↗

Experimental verification of modified synthetic discriminant function filters for rotation invariance

Experimental results are presented which demonstrate that effective binary synthetic discriminant functions (SDFs) can be constructed if the binary nature of the filter modulation is included in SDF synthesis. It is also shown that the iterative procedure needed to produce the SDF is well performed on the optical correlator, as opposed to off-line computation. Binary SDF filters have been demonstrated which produce approximately equal correlation peaks over in-plane rotation ranges up to 75 deg and out-of-plane rotation ranges up to 60 deg. This technique, combined with the translational position invariance of optical filters, allows a single filter to track a Shuttle Orbiter as it moves along a curved path across the input field.

Reid, Max B.↗

Optimizing binary phase and amplitude filters for PCE, SNR, and discrimination

Binary phase-only filters (BPOFs) have generated much study because of their implementation on currently available spatial light modulator devices. On polarization-rotating devices such as the magneto-optic spatial light modulator (SLM), it is also possible to encode binary amplitude information into two SLM transmission states, in addition to the binary phase information. This is done by varying the rotation angle of the polarization analyzer following the SLM in the optical train. Through this parameter, a continuum of filters may be designed that span the space of binary phase and amplitude filters (BPAFs) between BPOFs and binary amplitude filters. In this study, we investigate the design of optimal BPAFs for the key correlation characteristics of peak sharpness (through the peak-to-correlation energy (PCE) metric), signal-to-noise ratio (SNR), and discrimination between in-class and out-of-class images. We present simulation results illustrating improvements obtained over conventional BPOFs, and trade-offs between the different performance criteria in terms of the filter design parameter.

Downie, John D.↗

The X-ray binary, UW CMa

The UW CMa is a close, eclipsing binary composed of an O7f primary with a stron wind and a less luminous O-type companion. It was found that UW CMa a variable X-ray source, whose X-ray variations are in phase with its optical light curve. Since both components of the binary system are O stars, accretion by a compact object is ruled out as a mechanism for generating X-rays. The UW CMa represents a new class of X-ray binaries, in which X-rays result from the collision of a wind from one star with the surface or wind of the other star. It is hypothesised that the impact of a wind against a star generates a shock wave about 0.25 stellar radii above the stellar surface, and material behind the shock front, heated to bout 10 million degrees, radiates the X-ray apparent X-ray variability is due to its location between the two stars, where it undergoes eclipses. The high temperature region maintains an ionization cavity in the wind, as detected with IUE. The ionization cavity is the source of depletion of absorbing ions in the wind between the two stars.

Heap, S. R.↗

The eclipsing AM Herculis variable H1907 + 690

The discovery is reported of an eclipsing cataclysmic variable that exhibits up to 10 percent circular polarization at optical wavelengths, securing its classification as an AM Herculis type binary. The object, H1907 + 609, was located with the guidance of X-ray positions from the HEAO 1 survey. Optical CCD photometry exhibits deep eclipses, from which is derived a precise orbital period of 1.743750 hr. The eclipse duration suggests an inclination angle about 80 deg for a main-sequence secondary star. The optical flux has been persistently faint during observations spanning 1987-1990, while the X-ray measurements suggest long-term X-ray variability. The polarization and photometric light curves can be interpreted with a geometric model in which most of the accretion is directed toward a single magnetic pole, with an accretion spot displaced about 17 deg in longitude from the projection of the secondary star on the white dwarf surface.

Remillard, R. A.↗

A Black Hole X-ray Binary at ~100 Hz: Multiwavelength Timing of MAXI J1820+070 with HiPERCAM and NICER

We report on simultaneous sub-second optical and X-ray timing observations of the low-mass X-ray binary black hole candidate MAXI J1820+070. The bright 2018 outburst rise allowed simultaneous photometry in five optical bands (ugrizs) with HiPERCAM/GTC (Optical) atf rame rates over 100 Hz, together with NICER/ISS observations (X-rays). Intense (factor of2) red flaring activity in the optical is seen over a broad range of time-scales down to∼10 ms. Cross-correlating the bands reveals a prominent anticorrelation on time-scales of ∼seconds, and a narrow sub-second correlation at a lag of≈+165 ms (optical lagging X-rays). This lag increases with optical wavelength, and is approximately constant over Fourier frequencies of∼0.3–10 Hz. These features are consistent with an origin in the inner accretion flow and jet base within∼5000 Gravitational radii. An additional∼+5 s lag feature may be ascribable to disc reprocessing. MAXI J1820+070 is the third black hole transient to display a clear∼0.1 s optical lag, which may be common feature in such objects. The sub-second lag variation with wavelength is novel, and may allow constraints on internal shock jet stratification models.

J A Paice↗

Operation of a deformable mirror device as a Fourier plane phase modulating filter

The operation of a deformable mirror device (DMD) as a Fourier plane phase modulating filter is described. An analysis of the optical characteristics of the DMD elements as phase modulators is summarized. Analytical and experimental results indicating the existence of a quasi-phase-only operational mode are presented. These results are used to specify the mirror deflection required to implement a binary phase-only image correlation operation. An optical correlator system is implemented using the DMD Fourier plane filter and experimental results from this system are compared with computer simulations of the correlator operation.

Florence, James M.↗

XTE Proposal #20102--"SS 433's High Energy Spectrum"

We observed the jet-producing compact binary system SS 433 with RXTE during three multiwavelength campaigns, the first in conjunction with ASCA observations, the second simultaneous with a VLA-VLBA-MERLIN campaign, and the third associated with a Nobeyama millimeter-band campaign. All these campaigns included optical observations. Occurring at different jet precession and binary phases, the observations also monitored the system during a radio flare. The data provide SS 433's X-ray spectrum over more than an energy decade, and track the spectral variations as the X-ray source was partially eclipsed. The continuum can be modeled as a power law with an exponential cutoff, which can be detected to approximately 50 keV. Strong line emission is evident in the 5-10 keV range which can be modeled as a broad line whose energy is precession independent and a narrow line whose energy does vary with jet precession phase; this line model is clearly an over simplification since the PCA does not have sufficient energy resolution to detect the lines ASCA observed. The eclipses are deeper at high energy and at jet precession phases when the jets are more inclined towards and away from us. A large radio flare occurred between two sets of X-ray monitoring observations; an X-ray observation at the peak of the flare found a softer spectrum with a flux approximately 1/3 that of the quiescent level.

Band, David L.↗

Optical and UV spectra of RS CVn stars

The observed phenomenology in RS CVn and related binary systems is considered in terms of its modeling according to solar activity by examining UV and optical spectroscopy. Current data are examined to validate the existence of cool starspots, plage, prominences, and flares, as well as to determine the consistency of spatial correlations given by these data. RS CVn stars show spots at or near the poles, contrasting the low latitudes of solar spots; plage appears to be associated with cool spots on BY Draconis-like systems; plage and prominences, although identified as distinct phenomena, are theorized to be the same event in some cases. More spectroscopic and photometric observations are proposed to identify the detailed structure and locations of spots. UV and visible data are also required to distinguish plage regions from flare variations as well as determine the relation of extended structures to starspot and plage phenomena in RS CVn systems.

Ramsey, Lawrence W.↗

First Search for an X-Ray-Optical Reverberation Signal in an Ultraluminous X-Ray Source

Using simultaneous optical (VLT/FORS2) and X-ray (XMM-Newton) data of NGC 5408, we present the first ever attempt to search for a reverberation signal in an ultraluminous X-ray source (NGC 5408 X-1). The idea is similar to active galactic nucleus broad line reverberation mapping where a lag measurement between the X-ray and the optical flux combined with a Keplerian velocity estimate should enable us to weigh the central compact object. We find that although NGC 5408 X-1ʼs X-rays are variable on a timescale of a few hundred seconds (rms of 9.0 +/- 0.5%), the optical emission does not show any statistically significant variations. We set a 3σ upper limit on the rms optical variability of 3.3%. The ratio of the X-ray to the optical variability is an indicator of X-ray reprocessing efficiency. In X-ray binaries, this ratio is roughly 5. Assuming a similar ratio for NGC 5408 X-1, the expected rms optical variability is approximately equal to 2%, which is still a factor of roughly two lower than what was possible with the VLT observations in this study. We find marginal evidence (3 sigma) for optical variability on an approximately 24 hr timescale. Our results demonstrate that such measurements can be made, but photometric conditions, low sky background levels, and longer simultaneous observations will be required to reach optical variability levels similar to those of X-ray binaries.

: accretion↗

Optical radiation associated with gamma-ray bursts

Calculations are made of the approximate characteristics of the reprocessed optical radiation resulting from the absorption of a gamma-ray burst by a nearby star. The overall reprocessing time scale, including contributions from gamma-ray transfer and diffusion of the optical radiation, is estimated. It is noted that diffusive cooling occurs by either a 'self-similar' or a 'transparency' wave of postabsorption stellar surface temperatures greater or less than 10,000 K, respectively. Depending on the combination of stellar and gamma-ray burst properties, the reprocessing time scale can vary from the duration of the gamma-ray burst (approximately 1 s) to the maximum calculated cooling time (approximately 1000 s). Calculations for close binary systems are made of the number of optical photons per square centimeter expected at earth as a function of the observed gamma-ray burst fluences and likely distances. It is predicted that, if all gamma-ray bursters are in close binaries, the number of detections per year by an all sky monitor of 200 photons per sq cm sensitivity will be about 100.

London, R. A.↗

Study of optical properties of X-ray sources

X-ray sources are reported for HZ Herculis, supergiant primary X-ray binary systems, and Cyg X-3. Also reported is an analysis of earlier optical and X-ray observations, along with optical coverage of the 1974 lunar occulation of the Crab Nebula.

Vandenbout, P. A.↗

Auto and hetero-associative memory using a 2-D optical logic gate

An optical system for auto-associative and hetero-associative recall utilizing Hamming distance as the similarity measure between a binary input image vector V(sup k) and a binary image vector V(sup m) in a first memory array using an optical Exclusive-OR gate for multiplication of each of a plurality of different binary image vectors in memory by the input image vector. After integrating the light of each product V(sup k) x V(sup m), a shortest Hamming distance detection electronics module determines which product has the lowest light intensity and emits a signal that activates a light emitting diode to illuminate a corresponding image vector in a second memory array for display. That corresponding image vector is identical to the memory image vector V(sup m) in the first memory array for auto-associative recall or related to it, such as by name, for hetero-associative recall.

Chao, Tien-Hsin↗

Binary pseudo-random array standard for extreme ultraviolet lithography tool characterization

Extreme ultraviolet (EUV) imaging tools play a crucial role in EUV lithography. Achieving high accuracy in EUV metrology is essential for advanced semiconductor manufacturing. A thorough characterization of the instrumentation in use is required. Binary pseudo-random arrays (BPRAs) are an established standard for calibrating and characterizing optical instruments in the frequency domain. Here, we expand the BPRA standard to applications in EUV imaging. To extend the technology to the EUV spectral range, a high-resolution BPRA target with the smallest feature size of 40 nm is developed. The EUV BPRA target establishes an in situ and portable calibration and alignment standard for EUV imaging. The target is patterned by means of electron-beam lithography, using a nickel absorber with a thickness of 39 nm. The substrate is a 4″ silicon wafer with a molybdenum/silicon multilayer coating. To demonstrate the efficacy of the target and develop the instrument calibration protocol, the target is imaged on the Sharp Hyper-NA Actinic Reticle Review Project EUV mask microscope. Power spectral density (PSD) data are presented. The characteristics of the imaging system are imprinted on the PSD. The modulation transfer function is extracted from the PSD data. A partially coherent imaging model is used as a reference to the experimental results.

BPRA↗