Difference frequency generation by optical mixing of two dye lasers in proustite.
Explore the source record for details and available documents.
Decker, C. D.↗
SEARCH · Search NASA
Results for “optical frequency”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Deep-Space Navigation Using Optical Communications Systems
Optical communication links using lasers can potentially deliver data rates much higher than those possible using radio frequencies. If optical communications equipment is going to be carried by future deep-space missions, this equipment, with some adaptations, could also be used to perform tracking for trajectory determination. A number of experiments have been performed in Earth orbit and in lunar orbit using optical data links, while other missions have demonstrated optical links over interplanetary distances. Laser ranging using corner cube retroreflectors is a well-established technique that has been used for orbit determination of Earth orbiting spacecraft, for geodesy, and for lunar research, achieving centimeter-level precisions, but it is not a practical method for deep-space distances. There are two main optical tracking types that are being considered for deep-space navigation. The first is optical astrometry of spacecraft: a telescope on the ground images the laser beam coming from a spacecraft against the star background, determining its plane-of-sky position as seen from the observatory. This type will greatly benefit from the release of the high-accuracy star catalog produced by ESA’s Gaia mission, allowing for the generation of plane-of-sky measurements with an accuracy similar to that obtained today using VLBI tracking techniques. The second is optical ranging using active optical systems at both ends of the link, requiring a more careful design of the spacecraft optical communications system. One of the advantages of using optical frequencies is that they are not affected by charged particles in the signal path the way that radio frequencies are, eliminating solar plasma and ionospheric effects from the light-time calculation and the corresponding noise. On the other hand, clouds would preclude any type of optical communication, and daytime light scattering precludes astrometric measurements. This paper presents our analysis so far of the performance that could be achieved using optical data types in a number of deep-space scenarios. One of the questions that we are trying to answer is whether spacecraft equipped with optical communications terminals would also need to carry radio-frequency equipment for navigational purposes. We also want to understand how accurately we will be able to navigate spacecraft in different mission types and phases, and what would be the constraints, advantages, and disadvantages of using optical communications systems for deep-space navigation.
Karimi, Reza↗
Fiber optic data bus using Frequency Division Multiplexing (FDM) and an asymmetric coupler
A fiber optic data bus, using frequency division multiplexing (FDM) is discussed. The use of FDM is motivated by the need to avoid central control of the bus operation. A major difficulty of such a data bus is introduced by the couplers. An efficient low loss access coupler with an asymmetric structure is presented, and manufacturing processes for the coupler are proposed.
Zanger, M.↗
Squeezing Alters Frequency Tuning of WGM Optical Resonator
Mechanical squeezing has been found to alter the frequency tuning of a whispering-gallery-mode (WGM) optical resonator that has an elliptical shape and is made of lithium niobate. It may be possible to exploit this effect to design reconfigurable optical filters for optical communications and for scientific experiments involving quantum electrodynamics. Some background information is prerequisite to a meaningful description of the squeezing-induced alteration of frequency tuning: The spectrum of a WGM resonator is represented by a comblike plot of intensity versus frequency. Each peak of the comblike plot corresponds to an electromagnetic mode represented by an integer mode number, and the modes are grouped into sets represented by integer mode indices. Because lithium niobate is an electro-optically active material, the WGM resonator can be tuned (that is, the resonance frequencies can be shifted) by applying a suitable bias potential. The frequency shift of each mode is quantified by a tuning rate defined as the ratio between the frequency shift and the applied potential. In the absence of squeezing, all modes exhibit the same tuning rate. This concludes the background information. It has been demonstrated experimentally that when the resonator is squeezed along part of either of its two principal axes, tuning rates differ among the groups of modes represented by different indices (see figure). The differences in tuning rates could be utilized to configure the resonance spectrum to obtain a desired effect; for example, through a combination of squeezing and electrical biasing, two resonances represented by different mode indices could be set at a specified frequency difference something that could not be done through electrical biasing alone.
Mohageg, Makan↗
State-of-the-art fiber optics for short distance frequency reference distribution
A number of recently developed fiber-optic components that hold the promise of unprecedented stability for passively stabilized frequency distribution links are characterized. These components include a fiber-optic transmitter, an optical isolator, and a new type of fiber-optic cable. A novel laser transmitter exhibits extremely low sensitivity to intensity and polarization changes of reflected light due to cable flexure. This virtually eliminates one of the shortcomings in previous laser transmitters. A high-isolation, low-loss optical isolator has been developed which also virtually eliminates laser sensitivity to changes in intensity and polarization of reflected light. A newly developed fiber has been tested. This fiber has a thermal coefficient of delay of less than 0.5 parts per million per deg C, nearly 20 times lower than the best coaxial hardline cable and 10 times lower than any previous fiber-optic cable. These components are highly suitable for distribution systems with short extent, such as within a Deep Space Communications Complex. Here, these new components are described and the test results presented.
Lutes, G. F.↗
A 100Mbps coherent optical link demonstration using frequency stabilized solid state lasers
The design, implementation, and performance evaluation of a 100Mbps binary phase shift keying (BPSK) coherent optical link using frequency stabilized solid state lasers is described. In this demonstration, the transmitted data is binary phase modulated at 100Mbps using an external resonant cavity phase modulator. At the receiving end, the signal is detected using a balanced heterodyne detector. An auxiliary frequency tracking loop (FTL) is used to help the initial frequency acquisition before handing over to the carrier phase tracking loop. The FTL is implemented using a delay line discriminator, and the detected frequency error is fed back to the local oscillator laser to close the tracking loop. Phase coherent reception is achieved by synchronizing the carrier phase using a Costas tracking loop. The demonstration showed that a high data rate phase coherent optical link can be implemented using frequency stabilized solid state lasers.
Chen, CHIEN-C.↗
Fiber-optic interferometer using frequency-modulated laser diodes
This paper describes an electrically passive fiber-optic interferometer which uses dual frequency-modulated laser diodes. Experimental results show that this type of interferometer can attain a displacement range of 100 micron with subnanometer resolution. This technique can serve as the basis for a number of high-precision fiber-optic sensors.
Beheim, G.↗
Performance of direct and iterative algorithms on an optical systolic processor
The frequency-multiplexed optical linear algebra processor (OLAP) is treated in detail with attention to its performance in the solution of systems of linear algebraic equations (LAEs). General guidelines suitable for most OLAPs, including digital-optical processors, are advanced concerning system and component error source models, guidelines for appropriate use of direct and iterative algorithms, the dominant error sources, and the effect of multiple simultaneous error sources. Specific results are advanced on the quantitative performance of both direct and iterative algorithms in the solution of systems of LAEs and in the solution of nonlinear matrix equations. Acoustic attenuation is found to dominate iterative algorithms and detector noise to dominate direct algorithms. The effect of multiple spatial errors is found to be additive. A theoretical expression for the amount of acoustic attenuation allowed is advanced and verified. Simulations and experimental data are included.
Ghosh, A. K.↗
Optimetrics for Precise Navigation
Optimetrics for Precise Navigation will be implemented on existing optical communication links. The ranging and Doppler measurements are conducted over communication data frame and clock. The measurement accuracy is two orders of magnitude better than TDRSS. It also has other advantages of: The high optical carrier frequency enables: (1) Immunity from ionosphere and interplanetary Plasma noise floor, which is a performance limitation for RF tracking; and (2) High antenna gain reduces terminal size and volume, enables high precision tracking in Cubesat, and in deep space smallsat. High Optical Pointing Precision provides: (a) spacecraft orientation, (b) Minimal additional hardware to implement Precise Optimetrics over optical comm link; and (c) Continuous optical carrier phase measurement will enable the system presented here to accept future optical frequency standard with much higher clock accuracy.
Precise↗
Simultaneous Optical and Dual-Frequency Radar Observations of Small Mass Meteors at Arecibo
We present simultaneous optical and radar observations of meteors observed over the Arecibo radar in Puerto Rico. These observations were obtained during ~24 h of radar time over 3 different nights in May 2012. The radar was operating in a dual-frequency mode at 430 MHz (UHF) and 46.8 MHz (VHF). The optical observations were made at 41 frames per second with an Andor Electron Multiplying CCD camera with a field of view of ~6, enabling the determination of accurate horizontal meteor velocities and optical light curves. There are varying detection sensitivities of the 3 different techniques (2 radar, 1 optical). The UHF radar is the most sensitive, resulting in a total of 8710 detected meteors during that period, while the VHF radar is significantly less sensitive— resulting in only 278 detected meteors. The optical observations are the least sensitive, resulting in a total of 178 detections. Of all of these meteors, only 19 were simultaneously detected by the 3 instruments. This paper focuses on the analysis of these 19 common events. The meteoroid masses determined from the optical light curves were found to be in the range of 20 μg to 1.2 mg and did not correlate with the maximum Signal-to-Noise Ratio (SNR) of either radar. In addition, the UHF radar detected 5 out of these 19 meteors with far side-lobes, beyond the main-beam and first side-lobe. This indicates that a significant fraction of events detected by the UHF radar could be in far side lobes and therefore have significantly underestimated Radar Cross Sections (RCS), given the smaller backscattered powers received in the side lobes.
Arecibo Observatory↗
A novel approach to a PPM-modulated frequency-doubled electro-optic cavity-dumped Nd:YAG laser
A technique which can provide frequency doubling, with high efficiency, while cavity dumping a laser for pulse position M-ary modulation while being used for an optical communication link is discussed. This approach uses a secondary cavity that provides feedback of the undoubled fundamental light, which is normally lost, into the primary cavity to be recirculated and frequency doubled. Specific operations of the electrooptic modulator and frequency-doubling crystal are described along with the overall modulation scheme and experimental setup.
Robinson, D. L.↗
Pump wavelength tuning of optical parametric oscillations and frequency mixing in KTiOAsO4
The properties of alexandrite laser-pumped optical parametric oscillators are reported for potassium titanyl arsenate. Near-infrared tuning curves and slope efficiencies were measured as functions of pump wavelength and pump power. In addition, sum frequency mixing of red and infrared wavelengths to produce green emission is also reported.
Jani, Mahendra G.↗
Distributing Frequency And Time Signals On Optical Fibers
Paper reports progress in distribution of frequency and time reference signals over optical fibers. Describes current performance at frequencies of 100 MHz, 1 GHz, and 8.4 GHz. Also describes transmitting and receiving equipment and discusses tradeoff between cost and performance. Concludes with discussion of likely future development and effects of developments on systems using distributed frequency reference signals.
Lutes, George F.↗
Optical fibers for the distribution of frequency and timing references
An optical fiber communications link was installed for the purpose of evaluating the applicability of optical fiber technology to the distribution of frequency and timing reference signals. It incorporated a 1.5km length of optical fiber cable containing two multimode optical fibers. The two fibers were welded together at one end of the cable to attain a path length of 3km. Preliminary measurements made on this link, including Allan variance and power spectral density of phase noise are reported.
Lutes, G. F.↗
Optical and high-frequency electrical properties of the lunar sample
Apollo 11 lunar powder optical and HF electrical properties, discussing reflectivity, polarization, absorption, differential mass spectrum and albedo
Campbell, M. J.↗
Commercial Production of Low-Loss Quantum Frequency Conversion and Electro-Optical Modulation Devices Enabled by Wafer-Level Processing of Reverse-Proton-Exchange Lithium Niobate Waveguides
Explore the source record for details and available documents.
42 ENGINEERING↗
Pressure effects on the frequency of continuous-wave optically pumped far-infrared lasers
The frequency of the 170.6-micron CW CH3OH optically pumped laser emission has been remeasured at different pressures without observing the pressure shift observed by Lawandy and Koepf (1980). The far-infrared frequency was synthesized with two stabilized CO2 lasers. No measurable pressure shift over the operating pressure range of the laser was observed, and the frequency was confirmed to be 1 757 526.3 MHz. However, competing lasing lines were found to produce spurious effects on the frequency. These effects may explain the apparent shifts.
Inguscio, M.↗
Microwave Oscillators Based on Nonlinear WGM Resonators
Optical oscillators that exploit resonantly enhanced four-wave mixing in nonlinear whispering-gallery-mode (WGM) resonators are under investigation for potential utility as low-power, ultra-miniature sources of stable, spectrally pure microwave signals. There are numerous potential uses for such oscillators in radar systems, communication systems, and scientific instrumentation. The resonator in an oscillator of this type is made of a crystalline material that exhibits cubic Kerr nonlinearity, which supports the four-photon parametric process also known as four-wave mixing. The oscillator can be characterized as all-optical in the sense that the entire process of generation of the microwave signal takes place within the WGM resonator. The resonantly enhanced four-wave mixing yields coherent, phase-modulated optical signals at frequencies governed by the resonator structure. The frequency of the phase-modulation signal, which is in the microwave range, equals the difference between the frequencies of the optical signals; hence, this frequency is also governed by the resonator structure. Hence, further, the microwave signal is stable and can be used as a reference signal. The figure schematically depicts the apparatus used in a proof-of-principle experiment. Linearly polarized pump light was generated by an yttrium aluminum garnet laser at a wavelength of 1.32 microns. By use of a 90:10 fiber-optic splitter and optical fibers, some of the laser light was sent into a delay line and some was transmitted to one face of glass coupling prism, that, in turn, coupled the laser light into a crystalline CaF2 WGM disk resonator that had a resonance quality factor (Q) of 6x10(exp 9). The output light of the resonator was collected via another face of the coupling prism and a single-mode optical fiber, which transmitted the light to a 50:50 fiber-optic splitter. One output of this splitter was sent to a slow photodiode to obtain a DC signal for locking the laser to a particular resonator mode. The other output of this splitter was combined with the delayed laser signal in another 50:50 fiber-optic splitter used as a combiner. The output.of the combiner was fed to a fast photodiode that demodulated light and generated microwave signal. In this optical configuration, the resonator was incorporated into one arm of a Mach-Zehnder interferometer, which was necessary for the following reasons: It was found that when the output of the resonator was sent directly to a fast photodiode, the output of the photodiode did not include a measurable microwave signal. However, when the resonator was placed in an arm of the interferometer and the delay in the other arm was set at the correct value, the microwave signal appeared. Such behavior is distinctly characteristic of phase-modulated light. The phase-modulation signal had a frequency of about 8 GHz, corresponding to the free spectral range of the resonator. The spectral width of this microwave signal was less than 200 Hz. The threshold pump power for generating the microwave signal was about 1 mW. It would be possible to reduce the threshold power by several orders of magnitude if resonators could be made from crystalline materials in dimensions comparable to those of micro-resonators heretofore made from fused silica.
Maleki, Lute↗