Search NASA⌕ Search

SEARCH · Search NASA

Results for “optimality analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Preliminary analysis and design optimization of the short spacer truss of Space Station Freedom

The analysis, dynamic simulation, and design optimization of the short spacer truss of the Space Station Freedom are presented in this report. The short spacer truss will be positioned between the integrated equipment assembly (IEA) and another truss, called the long spacer truss, in the Space Station Freedom. During its launch in the Space Shuttle, the truss will be subjected to considerable in-span distributed inertia loads due to shuttle accelerations. The short spacer truss, therefore, has been modeled as a space frame to account for flexural response. Several parameters have been assumed, since the design specifications are in the process of development; hence the results presented should be considered preliminary. However, the automated analysis and design capabilities that have been developed can readily be used to generate an optimum design of the short spacer truss once the actual specifications have been determined. This report includes static and dynamic analyses of the short spacer truss, which have been obtained with the linear elastic code LE-HOST (in these analyses, LE-HOST data files have been automated to facilitate their future use for different design specifications of the short spacer truss); the dynamic animation of the short spacer truss, which has been carried out by using the results of the dynamic analysis and a post-processing feature of the modeling code PATRAN; and the optimum-weight design of the spacer truss, which was obtained under prescribed stress, displacement, and frequency constraints by using the design code COMETBOARDS. Examination of the analysis and design results revealed that the design could be improved if the configuration of the short spacer truss were modified to a certain extent. A modified configuration, which may simplify fabrication, has been suggested. The performance of this configuration has been evaluated and was found to be satisfactory under both static and dynamic conditions.

Gendy, A. S.↗
NASA NTRS1991

Aerodynamic design optimization using sensitivity analysis and computational fluid dynamics

A new and efficient method is presented for aerodynamic design optimization, which is based on a computational fluid dynamics (CFD)-sensitivity analysis algorithm. The method is applied to design a scramjet-afterbody configuration for an optimized axial thrust. The Euler equations are solved for the inviscid analysis of the flow, which in turn provides the objective function and the constraints. The CFD analysis is then coupled with the optimization procedure that uses a constrained minimization method. The sensitivity coefficients, i.e. gradients of the objective function and the constraints, needed for the optimization are obtained using a quasi-analytical method rather than the traditional brute force method of finite difference approximations. During the one-dimensional search of the optimization procedure, an approximate flow analysis (predicted flow) based on a first-order Taylor series expansion is used to reduce the computational cost. Finally, the sensitivity of the optimum objective function to various design parameters, which are kept constant during the optimization, is computed to predict new optimum solutions. The flow analysis of the demonstrative example are compared with the experimental data. It is shown that the method is more efficient than the traditional methods.

Baysal, Oktay↗
NASA NTRS1993

Calculation of optimum airfoils using direct solutions of the Navier-Stokes equations

A method has been developed which calculates the optimum airfoil shape at a specified operating condition. The Reynolds-averaged Navier-Stokes equations with a turbulence model are used as the governing equations for the fluid flow, and are explicitly introduced into the optimization analysis as constraint equations. The locations of all grid points which define the surface of the airfoil are design variables, eliminating the need for shape functions to describe changes in the airfoil geometry. A generalized reduced-gradient method is used to find the optimum airfoil shape. The use of a direct solution technique (Newton's method) to solve the Navier-Stokes equations allows for the efficient solution of the problem. This paper describes the optimization method and presents sample results.

Felker, Fort F.↗
NASA NTRS1993

Airfoil shape optimization using sensitivity analysis on viscous flow equations

An aerodynamic shape optimization method has previously been developed by the authors using the Euler equations and has been applied to supersonic-hypersonic nozzle designs. This method has also included a flowfield extrapolation (or flow prediction) method based on the Taylor series expansion of an existing CFD solution. The present paper reports on the extension of this method to the thin-layer Navier-Stokes equations in order to account for the viscous effects. Also, to test the method under highly nonlinear conditions, it has been applied to the transonic flows. Initially, the success of the flow prediction method is tested. Then, the overall method is demonstrated by optimizing the shapes of two supercritical transonic airfoils at zero angle of attack. The first one is shape optimized to achieve a minimum drag while obtaining a lift above a specified value. Whereas, the second one is shape optimized for a maximum lift while attaining a drag below a specified value. The results of these two cases indicate that the present method can produce successfully optimized aerodynamic shapes.

Eleshaky, Mohamed E.↗
NASA NTRS1981

Multisensor analysis of hydrologic features with emphasis on the Seasat SAR

Synthetic aperture radar (SAR) imagery of the Wind River Range area in Wyoming is compared with visible and near-infrared imagery of the same area. Data from the Seasat L-Band SAR and an aircraft X-Band SAR are compared with Landsat Return Beam Vidicon (RBV) visible data and near-infrared aerial photography and topographic maps of the same area. It is noted that visible and near-infrared data provide more information than the SAR data when conditions are the most favorable. The SAR penetrates clouds and snow, however, and data can be acquired day or night. Drainage density detail is good on SAR imagery because individual streams show up well owing to riparian vegetation; this causes higher radar reflections which result from the 'rough' surface which vegetation creates. In the winter image, the X-Band radar data show high returns because of cracks on the lake ice surfaces. High returns can also be seen in the L-Band SAR imagery of the lakes due to ripples on the surface induced by wind. It is concluded that the use of multispectral data would optimize analysis of hydrologic features.

Foster, J. L.↗
NASA NTRS1972

Space shuttle auxiliary power unit study, phase 2

A study was performed to establish the preliminary design of the space shuttle auxiliary power unit. Details of the analysis, optimizations, and design of the components, subsystems and systems are presented.

Binsley, R. L.↗
NASA NTRS1971

Computer-aided linear-circuit design.

Usually computer-aided design (CAD) refers to programs that analyze circuits conceived by the circuit designer. Among the services such programs should perform are direct network synthesis, analysis, optimization of network parameters, formatting, storage of miscellaneous data, and related calculations. The program should be embedded in a general-purpose conversational language such as BASIC, JOSS, or APL. Such a program is MARTHA, a general-purpose linear-circuit analyzer embedded in APL.

Penfield, P.↗
NASA NTRS1972

Development of small radioisotope heaters.

A design study was conducted to (1) determine potential applications of small (1 to 50 watt) radioisotope heaters in manned spacecraft thermal control and life support systems and (2) develop designs for an optimum group of heaters to fulfill a maximum number of applications with mission times from 14 days to 5 years. Thirty-seven potential application areas were identified requiring up to 300 heaters ranging in size from less than 1 to over 100 watts. Safety and design criteria were selected and reference heater designs developed. Optimization analysis indicated that two heater sizes, 10- and 50-w, and two fuels, promethia and plutonia, would most efficiently meet the majority of identified applications.

Smith, T. H.↗
NASA NTRS1974

On computer-aided design of aerospace vehicles

Digital computers are being used in many engineering activities to support design work. This paper provides an overview of some of this work as it relates to the design of aerospace vehicles. Discussions are given of some of the complexities of the design process which lead to large design costs and time. A number of important but disjointed computer capabilities have evolved over the years in analysis, optimization, and graphics, and such capabilities aid in addressing the problem of design complexity. Examples of existing computer-aided design (CAD) systems are given and trends for future CAD systems are indicated, as well as their relationship to pertinent data management technology. It is suggested that major gains in design capability will occur through continued development of CAD methodology and that these gains may be accelerated through a large focused effort.

Sobieszczanski, J. E.↗
NASA NTRS1975

Optimal optoacoustic detector design

Optoacoustic detectors are used to measure pressure changes occurring in enclosed gases, liquids, or solids being excited by intensity or frequency modulated electromagnetic radiation. Radiation absorption spectra, collisional relaxation rates, substance compositions, and reactions can be determined from the time behavior of these pressure changes. Very successful measurements of gaseous air pollutants have, for instance, been performed by using detectors of this type together with different lasers. The measuring instrument consisting of radiation source, modulator, optoacoustic detector, etc. is often called spectrophone. In the present paper, a thorough optoacoustic detector optimization analysis based upon a review of its theory of operation is introduced. New quantitative rules and suggestions explaining how to design detectors with maximal pressure responsivity and over-all sensitivity and minimal background signal are presented.

Rosengren, L.-G.↗
NASA NTRS1977

A survey of compiler development aids

A theoretical background was established for the compilation process by dividing it into five phases and explaining the concepts and algorithms that underpin each. The five selected phases were lexical analysis, syntax analysis, semantic analysis, optimization, and code generation. Graph theoretical optimization techniques were presented, and approaches to code generation were described for both one-pass and multipass compilation environments. Following the initial tutorial sections, more than 20 tools that were developed to aid in the process of writing compilers were surveyed. Eight of the more recent compiler development aids were selected for special attention - SIMCMP/STAGE2, LANG-PAK, COGENT, XPL, AED, CWIC, LIS, and JOCIT. The impact of compiler development aids were assessed some of their shortcomings and some of the areas of research currently in progress were inspected.

Buckles, B. P.↗
NASA NTRS1984

Interactive graphics nonlinear constrained optimization

An interactive computer graphics environment was used for nonlinear constrained optimization analysis. It is found that by combining the power of a digital computer with the subtlety of engineering judgment during program execution, final results can be substantially better than the ones achieved by the numerical algorithm by itself.

Saouma, V. E.↗
NASA NTRS1984

Aeroelastic-aerodynamic optimization of high speed helicopter-compound rotor

Several problems related to the aeroelastic/aerodynamic optimization of a high speed helicopter compound rotor are discussed. The helicopter fuselage vibration problem, the effects of fuselage vibrations, the source of external and periodic air loads, typical airfoil environments and configurations, rotor dynamics, vibration reduction, and requirements for the rotor design optimization analysis are among the topics covered.

Sutton, L. R.↗
NASA NTRS1988

Sensitivity analysis and multidisciplinary optimization for aircraft design: Recent advances and results

Optimization by decomposition, complex system sensitivity analysis, and a rapid growth of disciplinary sensitivity analysis are some of the recent developments that hold promise of a quantum jump in the support engineers receive from computers in the quantitative aspects of design. Review of the salient points of these techniques is given and illustrated by examples from aircraft design as a process that combines the best of human intellect and computer power to manipulate data.

Sobieszczanski-Sobieski, Jaroslaw↗
NASA NTRS1989

Performance optimization for rotors in hover and axial flight

Performance optimization for rotors in hover and axial flight is a topic of continuing importance to rotorcraft designers. The aim of this Phase 1 effort has been to demonstrate that a linear optimization algorithm could be coupled to an existing influence coefficient hover performance code. This code, dubbed EHPIC (Evaluation of Hover Performance using Influence Coefficients), uses a quasi-linear wake relaxation to solve for the rotor performance. The coupling was accomplished by expanding of the matrix of linearized influence coefficients in EHPIC to accommodate design variables and deriving new coefficients for linearized equations governing perturbations in power and thrust. These coefficients formed the input to a linear optimization analysis, which used the flow tangency conditions on the blade and in the wake to impose equality constraints on the expanded system of equations; user-specified inequality contraints were also employed to bound the changes in the design. It was found that this locally linearized analysis could be invoked to predict a design change that would produce a reduction in the power required by the rotor at constant thrust. Thus, an efficient search for improved versions of the baseline design can be carried out while retaining the accuracy inherent in a free wake/lifting surface performance analysis.

Quackenbush, T. R.↗