Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxidation state analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Preliminary Kinetic Analysis of Non-Equilibrium Plasma- Assisted Methanol Pyrolysis and Oxidation Experiments

Efforts to enhance power generation efficiency and reduce emissions have driven interest in novel combustion techniques, including non-equilibrium plasma (NEP) ignitors. NEP ignitors show promise in improving energy conversion efficiency, fuel reforming, emission control, and lean-flammability limits. However, their adoption is hindered by a limited understanding of the interplay between plasma-enhanced combustion and thermal chemistry, particularly for complex fuels under engine-relevant conditions. Developing experimentally validated kinetic mechanisms is therefore critical. Additionally, the increasing interest in renewable biofuels like ethanol and methanol, coupled with the desirable qualities of NEP ignitors, presents a compelling opportunity for study. Therefore, this work acts as an extension of a previous work (Bopaiah et al., 2023) pertaining to the experimental results of NEP-assisted methanol pyrolysis and oxidation. Experiments were performed with a custom-built plasma flow reactor at 0.5 atm and temperatures from 523-1203 K. All reactive mixtures are extremely diluted to minimize exothermicity due to reactivity, allowing isothermal assumptions and the isolation of plasma chemistry from thermal chemistry. A dielectric barrier discharge plasma, at 14 kV and 15 ns full-width half maximum, was applied to the reactive mixture at varying frequencies to maintain the number of pulses with increasing temperature. Steady-state product speciation was performed downstream of the reactor with ex-situ GC/MS diagnostics. The attained experimental results were examined through in-depth analysis performed by means of an in-development plasma-coupled kinetic mechanism. As discussed in the previous work, the plasma significantly accelerates methanol pyrolysis, increasing stable intermediate production, including oxygenated and nitrile species. Plasma-assisted oxidation shows even faster fuel consumption compared to pyrolysis and a 200 K ignition shift compared to thermal oxidation. For plasma-assisted pyrolysis, the model demonstrates that accelerated fuel consumption stems from dissociative quenching of excited N2 states with fuel and H2, generating H radicals that react to rapidly form CH3 and CH2OH radicals. At low temperatures, these radicals recombine to produce oxygenates, while CH3 drives nitrile and hydrocarbon formation at higher temperatures. While the model captures pyrolysis trends well, discrepancies in methane, ethylene, and ethanol predictions are present. Similarly, the model faces challenges in accurately representing plasma-assisted oxidation, predicting a much steeper fuel gradient and ignition 100 K earlier than the experiment. While a similar scheme to pyrolysis is nested in the reaction pathway, the enhancement of the O and H radical fluxes and their initiation of the OH and HO2 radical pools dominate fuel and intermediate oxidation. The overestimation of these processes is shown to be responsible for the divergence of model from experiment. While the modelling predictions of this preliminary mechanism are not perfect, they serve as a valuable starting point. Primarily, they elicited new reaction pathways that are not otherwise possible in thermal chemistry induced reaction kinetics. The results also provide a basis for the future work that should be performed. For example, theoretical and experimental studies on excited nitrogen species and fuel/fuel radical interactions, quantification of the NOx production, and the kinetics behind the slow ignition observed in oxidation should be emphasized.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Excited-State Bond Contraction and Charge Migration in a Platinum Dimer Complex Characterized by X-ray and Optical Transient Absorption Spectroscopy

Interactions between metal centers in dimeric transition metal complexes (TMCs) play important roles in their excited-state energetics and pathways, and, thus, affect their photophysical properties relevant to their applications, e.g., photoluminescent materials and photocatalysis. In this study, we report electronic and nuclear structural dynamics studies of two photoexcited pyrazolate-bridged [Pt(ppy)(µ-R 2 pz)] 2 -type Pt(II) dimers (ppy = 2-phenylpyridine, µ-R 2 pz = 3,5-substituted pyrazolate): [Pt(ppy)(µ-H 2 pz)] 2 (1) and [Pt(NDI-ppy)(µ-Ph 2 pz)] 2 (2, NDI = 1,4,5,8-naphthalenediimide), both of which have distinct ground state Pt-Pt distances. X-ray transient absorption spectroscopy at the Pt L III -edge revealed a new d-orbital vacancy due to the one-electron oxidation of the Pt centers in 1 and 2. However, while a transient Pt-Pt contraction was observed in 2, such an effect was completely absent in 1, demonstrating how the excited states of these complexes are determined by the overlap of the Pt (d z 2 ) orbitals, which is tuned by steric bulk of the pyrazolate R-groups in the 3- and 5-positions. In tandem with analysis of the Pt-Pt distance structural parameter, we observed photoinduced charge separation in 2 featuring a covalently linked NDI acceptor on the ppy ligand. The formation and subsequent decay of the NDI radical anion absorption signals were detected upon photoexcitation using optical transient absorption spectroscopy. The NDI radical anion decayed on the same timescale, hundreds of picoseconds, as that of the d-orbital vacancy signal of the oxidized Pt-Pt core observed in the XTA measurements. The data indicated ultrafast formation of the charge-separated state and subsequent charge recombination to the original Pt(II-II) species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Second Coordination Sphere Effects in an Evolved Ru Complex Based on Highly Adaptable Ligand Results in Rapid Water Oxidation Catalysis

A new Ru complex containing the deprotonated 2,2':6',2"-terpyridine-6,6"-diphosphonic acid (H 4 tPa) and pyridine (py) of general formula [Ru II (H 3 tPa-κ-N 3 O)(py) 2 ] + , 2 + , has been prepared and thoroughly characterized by means of spectroscopic and electrochemical techniques, X-ray diffraction analysis, and density functional theory (DFT) calculations. Complex 2 + presents a dynamic behavior in the solution that involves the synchronous coordination and the decoordination of the dangling phosphonic groups of the tPa 4– ligand. Yet, at oxidation state IV, complex 2 + becomes seven coordinated with the two phosphonic groups now bonded to the metal center. Further, at this oxidation state at neutral and basic pH, the Ru complex undergoes the coordination of an exogenous OH – group from the solvent that leads to an intramolecular aromatic O atom insertion into the CH bond of one of the pyridyl groups, forming the corresponding phenoxo-phosphonate Ru complex [Ru III (tPaO-κ-N 2 O P O C )(py) 2 ] 2– , 4 2– , where tPaO 5– is the 3-(hydroxo-[2,2':6',2"-terpyridine]-6,6"-diyl)bis(phosphonate) ligand. This new in situ generated Ru complex, 4 2– , has been isolated and spectroscopically and electrochemically characterized. In addition, a crystal structure has been also obtained using single-crystal X-ray diffraction techniques. Complex 4 2– turns out to be an exceptional water oxidation catalyst achieving record maximum turnover frequencies (TOF max ) on the order of 16 000 s –1 . A mechanistic analysis complemented with DFT calculations has further been carried out, showing the critical role of intramolecular second coordination sphere effects exerted by the phosphonate groups in lowering the activation energy at the rate-determining step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Electrolyte Ions on Iridium Oxide-Based Water Oxidation Catalysis

The oxygen evolution reaction often limits the efficiency of renewable fuel syntheses due to its sluggish reaction kinetics. Of the factors that have been studied to improve this important reaction is how the choice of the electrolyte may alter the reaction kinetics. Despite its importance, sys-tematic studies of this effect have been relatively rare. Herein, we report an effort toward correcting this deficiency by investigating the effect of nitrate on water oxidation catalyzed by IrO x . The results show that nitrate can suppress the reaction, resulting in a decrease of the rate and an increase in the Tafel slope. The effect was found to be consistent with a microkinetic model incorporating competitive adsorption between reac-tion intermediates and nitrate, suggesting that the reaction mechanism was unaffected by anion identity. Moreover, this blocking effect exhibited dependence on the cations, following a trend Li + ≈ Na + ≈ K + > Cs + > TEA + . The results are expected to find broad applications in electrocatalysis.

Tafel slope analysis↗

Development of High Energy Density Diaminocyclopropenium‐Phenothiazine Hybrid Catholytes for Non‐Aqueous Redox Flow Batteries

Abstract This report describes the design of diaminocyclopropenium‐phenothiazine hybrid catholytes for non‐aqueous redox flow batteries. The molecules are synthesized in a rapid and modular fashion by appending a diaminocyclopropenium (DAC) substituent to the nitrogen of the phenothiazine. Combining a versatile C‐N coupling protocol (which provides access to diverse derivatives) with computation and structure‐property analysis enabled the identification of a catholyte that displays stable two‐electron cycling at potentials of 0.64 and 1.00 V vs. Fc/Fc + as well as high solubility in all oxidation states (≥0.45 M in TBAPF 6 /MeCN). This catholyte was deployed in a high energy density two‐electron RFB, exhibiting >90 % capacity retention over 266 hours of flow cell cycling at >0.5 M electron concentration.

Yan, Yichao↗

Li 5 VF 4 (SO 4 ) 2 : A Prototype High-Voltage Li-Ion Cathode.

A Li-rich polyanionic compound based on V 3+ with a previously unknown structure, Li 5 VF 4 (SO 4 ) 2 , has been developed as a high-voltage cathode material for Li-ion batteries. The solvothermal preparation of this material, crystal structure solution, and initial electrochemical characterization are presented. An analysis based on density functional theory electronic structure calculations suggests that a high voltage close to 5 V is required to extract two Li ions and to reach the oxidation state of V 5+ . However, the use of conventional carbonate-based electrolytes, which exhibit increasing degradation above a potential of 4.3 V, does not permit the full capacity of this compound to be achieved at this time.

25 ENERGY STORAGE↗

Abstract for CRADA between NETL and Praxair Surface Technologies, Inc. (AGMT-1288)

The National Energy Technology Laboratory (NETL) and Praxair Surface Technologies (Participant) will collaborate in the design and manufacturing of new high-performance thermal barrier coatings (TBCs) for hydrogen gas turbine applications. High-throughput first-principles density functional theory (DFT) calculations will be performed to accelerate novel TBCs discovery with expanded phase field, increased temperature and erosion capabilities, low thermal conductivity, and significant toughness imparted by ferroelastic toughening for the non-transformable tetragonal oxide phase. Down-selected materials will be manufactured using solid state powder processing techniques. Testing will include isothermal aging followed by Raman and x-ray diffraction (XRD) phase analysis, indentation fracture toughness measurements, erosion testing, and thermal conductivity measurements. The collaboration will facilitate the deployment of hydrogen gas turbine technologies that are a key to the decarburization of power generation in the United States.

08 HYDROGEN↗

Dispersive X-ray absorption spectroscopy using independent grazing-incidence focusing and convexly bent Bragg-crystal dispersing optics

We present a modular instrument for dispersive X-ray absorption spectroscopy (DXAS) developed for the Advanced Spectroscopy Beamline at Sector 25 of the Advanced Photon Source. The setup employs a double-multilayer monochromator to provide X-rays with a broad energy bandwidth, Kirkpatrick–Baez mirrors for focusing, a convexly bent Bragg-crystal polychromator for energy dispersion, and a pixel-array detector to resolve all X-ray energies and collect their intensity simultaneously, thereby enabling acquisition of a full X-ray absorption spectrum in a single shot. The use of separate optics for X-ray focusing and energy dispersion provides high spatial resolution and avoids chromatic aberrations inherent in focusing bent-crystal optics, and a modular design makes implementation of the technique at other beamlines possible without requiring modifications to the upstream beamline configurations. Theoretical calculations are performed to determine optimal instrument operating parameters and demonstrate that an energy resolution better than the K-edge core-hole lifetime broadening can be maintained while providing a sufficient bandwidth for X-ray absorption near-edge structure spectroscopy through the full operating range of 5–11 keV. Additionally, instrument design, data analysis methods, and initial DXAS results on lithium–manganese–nickel oxide laminates are presented.

47 OTHER INSTRUMENTATION↗

Molecular Design of Al(II) Intermediates for Small Molecule Activation

Promoting societally important small molecule activation processes with earth-abundant metals is foundational for a sustainable chemistry future. In this context, mapping new reaction pathways that would enable abundant main-group elements to mimic the behaviors of d- and f-block elements is facilitated by exploring unusual oxidation states. The most abundant metal on earth, aluminum, has been well studied in the Lewis acidic +III and Lewis basic +I oxidation states but rarely in the potentially biphilic +II oxidation state until recently, when a renaissance of Al(II) chemistry emerged from a range of research groups. In this Perspective, we review the chemistry of mononuclear Al radicals, including both Al-centered radicals (i.e., Al(II) compounds) and redox non-innocent systems (i.e., formally Al(II) species that are physically Al(III) with ligand-centered radicals), with an emphasis on small molecule reactivity. We also provide a meta-analysis of the Al(II) literature to summarize how different design strategies (e.g., redox non-innocence, strained coordination geometries) have been shown to impart biphilic character to Al radicals and tune their behavior, thus allowing Al radicals to mimic the chemistry of certain d- and f-block metal ions such as Ti(III) and Sm(II). We expect these molecular design concepts to inform future Al(II) studies as the chemistry of this unusual oxidation state of Al continues to grow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Techno-Economic Analysis of Natural Gas Fuel Cell Plant Configurations

The United States (U.S.) Department of Energy (DOE) Office of Fossil Energy and Carbon Management (FECM) and the National Energy Technology Laboratory (NETL) have been pursuing the development of solid oxide fuel cell (SOFC) technology to enable future power generation systems that are consistent with the cornerstones of the DOE mission—to ensure America’s security and prosperity by addressing its energy and environmental challenges through transformative science and technology solutions. The U.S. DOE FECM SOFC Program is currently focused on the development of low-cost, highly efficient, and reliable SOFC power systems. NETL’s SOFC technology development roadmap is aligned with near-term market opportunities in the distributed generation sector to validate and advance the technology while paving the way for utility-scale (> 50 MW) natural gas and coal-derived synthesis gas-fueled applications via progressively larger system demonstrations. The present study represents a part of a series of system evaluations being developed at NETL to aid in prioritizing technological advances along research pathways to the realization of utility-scale SOFC systems, a transformational goal of the fuel cell program. In particular, the system performance of utility-scale natural gas fuel cell (NGFC) systems with and without carbon dioxide (CO 2 ) capture is presented. The objective of the study is to provide targeted research and development (R&D) guidance to the FECM SOFC Program and SOFC commercial developers to accelerate technology deployment.

03 NATURAL GAS↗

Nature of Reactive Hydrogen for Ammonia Synthesis over a Ru/C12A7 Electride Catalyst

Recently, there have been renewed interests in exploring new catalysts for ammonia synthesis under mild conditions. Electride-based catalysts are among the emerging ones. Ruthenium particles supported on an electride composed of a mixture of calcium and aluminum oxides (C12A7) have attracted great attention for ammonia synthesis due to their facile ability in activating N2 under ambient pressure. However, the exact nature of the reactive hydrogen species and the role of electride support still remain elusive for this catalytic system. Here, we report for the first time that the surface-adsorbed hydrogen, rather than the hydride encaged in the C12A7 electride, plays a major role in ammonia synthesis over the Ru/C12A7 electride catalyst with the aid of in situ neutron scattering techniques. Combining in situ neutron diffraction, inelastic neutron spectroscopy, density functional theory (DFT) calculation, and temperature-programmed reactions, the results provide direct evidence for not only the presence of encaged hydrides during ammonia synthesis but also the strong thermal and chemical stability of the hydride species in the Ru/C12A7 electride. Steady state isotopic transient kinetic analysis (SSITKA) of ammonia synthesis showed that the coverage of reactive intermediates increased significantly when the Ru particles were promoted by the electride form (coverage up to 84%) of the C12A7 support rather than the oxide form (coverage up to 15%). Such a drastic change in the intermediate coverage on the Ru surface is attributed to the positive role of electride support where the H2 poisoning effect is absent during ammonia synthesis over Ru. The finding of this work has significant implications for understanding catalysis by electride-based materials for ammonia synthesis and hydrogenation reactions in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of High Energy Density Diaminocyclopropenium-Phenothiazine Hybrid Catholytes for Non-Aqueous Redox Flow Batteries

Our work describes the design of diaminocyclopropenium-phenothiazine hybrid catholytes for non-aqueous redox flow batteries. The molecules are synthesized in a rapid and modular fashion by appending a diaminocyclopropenium (DAC) substituent to the nitrogen of the phenothiazine. Combining a versatile C-N coupling protocol (which provides access to diverse derivatives) with computation and structure-property analysis enabled the identification of a catholyte that displays stable two-electron cycling at potentials of 0.64 and 1.00 V vs. Fc/Fc + as well as high solubility in all oxidation states (≥0.45 M in TBAPF 6 /MeCN). This catholyte was deployed in a high energy density two-electron RFB, exhibiting >90 % capacity retention over 266 hours of flow cell cycling at >0.5 M electron concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating Cu-Site Doped Cu–Sb–S Nanoparticles Using Photoelectron and Electron Paramagnetic Resonance Spectroscopy

Tetrahedrite (Cu 12 Sb 4 S 13 ) and famatinite (Cu 3 SbS 4 ) are good candidates for green energy applications because they possess promising thermoelectric and photovoltaic properties as well as contain earth-abundant and nontoxic constituents. Herein, X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and electron paramagnetic resonance spectroscopy (EPR) methods examined inherent electronic properties and interatomic magnetic interactions of Cu-site doped tetrahedrite and famatinite nanomaterials. An energy-efficient modified polyol method was utilized for the synthesis of tetrahedrite and famatinite nanoparticles doped on the Cu-site with Zn, Fe, Ni, Mn, and Co. This is the first parallel study of tetrahedrite and famatinite nanomaterials with XPS, UPS, and EPR methods alongside a systematic analysis of dopant-dependent effects on the electronic structure and magnetic interactions for each material. XPS showed that the Cu and Sb species in tetrahedrite and famatinite possess different oxidation states, while UPS characterization reveals larger dopant-dependent shifts in the work function for tetrahedrite nanoparticles (4.21 to 4.79 eV) than for famatinite nanoparticles (4.57 to 4.77 eV). Finally, all famatinite nanoparticles display an EPR signal, indicating trace amounts of paramagnetic Cu(II) present below the detection limit of XPS. For tetrahedrite, EPR signatures were observed only for the Zn-doped and Mn-doped nanoparticles, suggesting signal broadening from Cu–Cu spin exchange or spin–lattice relaxation. This study demonstrates the complementary nature of XPS and EPR techniques for studying the oxidation states of metals in solid-state nanomaterials. Comparing the electronic and magnetic properties of tetrahedrite and famatinite while studying the impact of dopant incorporation will guide future endeavors in designing sustainable, high-performance materials for renewable energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Replacing Pyridine with Pyrazine in Molecular Cobalt Catalysts: Effects on Electrochemical Properties and Aqueous H2 Generation

Four new molecular Co(II)tetrapyridyl complexes were synthesized and evaluated for their activity as catalysts for proton reduction in aqueous environments. The pyridine groups around the macrocycle were substituted for either one or two pyrazine groups. Single crystal X-ray analysis shows that the pyrazine groups have minimal impact on the Co(II)–N bond lengths and molecular geometry in general. X-band EPR spectroscopy confirms the Co(II) oxidation state and the electronic environment of the Co(II) center are only very slightly perturbed by the substitution of pyrazine groups around the macrocycle. The substitution of pyrazine groups has a substantial impact on the observed metal- and ligand-centered reduction potentials as well as the overall H2 catalytic activity in a multimolecular system using the [Ru(2,2′-bipyridine)3]Cl2 photosensitizer and ascorbic acid as a sacrificial electron donor. The results reveal interesting trends between the H2 catalytic activity for each catalyst and the driving force for electron transfer between either the reduced photosensitizer to catalyst step or the catalyst to proton reduction step. The work presented here showcases how even the difference of a single atom in a molecular catalyst can have an important impact on activity and suggests a pathway to optimize the photocatalytic activity and stability of molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Airfoil Vibration Dampers program

The Airfoil Vibration Damper program has consisted of an analysis phase and a testing phase. During the analysis phase, a state-of-the-art computer code was developed, which can be used to guide designers in the placement and sizing of friction dampers. The use of this computer code was demonstrated by performing representative analyses on turbine blades from the High Pressure Oxidizer Turbopump (HPOTP) and High Pressure Fuel Turbopump (HPFTP) of the Space Shuttle Main Engine (SSME). The testing phase of the program consisted of performing friction damping tests on two different cantilever beams. Data from these tests provided an empirical check on the accuracy of the computer code developed in the analysis phase. Results of the analysis and testing showed that the computer code can accurately predict the performance of friction dampers. In addition, a valuable set of friction damping data was generated, which can be used to aid in the design of friction dampers, as well as provide benchmark test cases for future code developers.

Cook, Robert M.↗

Significant Tropospheric O3 Production from Extratropical Forest Fires:When? When Not?

There is significant controversy on whether extratropical fires contribute importantly to widespread ozone productionabsent the addition of urban pollutant nitrogen oxides (Jaffe and Widger, 2012, Singh et al., 2012,2013). Wereport a significant range of O3 production early in the fire plume history and report controls on which notable O3production occurs. The current data set is the airborne observations made on board NASAs highly instrumentedDC-8 aircraft during the ARCTAS (2008) and SEAC4RS (2013) campaigns within the Western United States. Aclear analysis of fire emissions was aided considerably by MERET (a Mixed Effects Regressions Emissions Technique).This technique allows consistent emission factors and enhancement ratios for O3 for individual aircraftsamples largely free from uncertainties resulting from mixing and entrainment which plague many published estimates.(Yokelson et al, 2013, Chatfield and Andreae, 2016). We find support for the reasonable idea that the ratioof nitrogen oxides (NOx) to volatile organic carbon (VOC) emissions controls new O3 production. The evidence isfor significant O3 production from high-fuel-nitrogen fuels (as evidenced by acetonitrile) and extremely hot largefires (like the Yosemite Rim Fire of 2013 which we analyze), while others do not. VOC emissions factors varysignificantly from fire to fire (and from different samples in the Rim Fire). Relative CO production (aka modifiedcombustion efficiency) is only one factor describing VOC emissions factors.

Chatfield, R.↗

Solventless, Ambient-Pressure Production of Bio-Based Lactones Over Earth-Abundant, Mixed Metal Oxide Catalysts for Circular Polyesters

Transitioning to a circular plastics economy will require use of renewable feedstocks, energy-efficient processes, and closed-loop recyclable polymers, such as polyesters. A key challenge lies in sustainably sourcing monomers used to make recyclable polyesters. This work presents a catalytic platform utilizing earth-abundant Cu(x)Ca(1-x)O mixed metal oxides for the oxidative dehydrocyclization of bio-based diols to lactones, which are advantaged for energy-efficient ring-opening polymerization. Operating below 200 degrees C, at ambient pressure, and without solvent, the process uses air as the sole oxidant, achieving high yields of lactones across a broad substrate scope of C4-8 diols in the liquid phase. The oxidative dehydrocyclization reaction is thermodynamically downhill due to water formation and energy-efficient compared to incumbent, non-redox pathways utilized in fossil carbon-based industrial processes for lactone production. Mechanistic studies reveal facile redox cycling of Cu2+-O(Ca2+)-Cu2+ interfacial sites unique to the developed catalyst. Techno-economic analysis and life cycle assessment estimate 40% lower energy demand and 15% lower GHG intensity per mass of butyrolactone produced compared to the fossil carbon-based route. Liquid-phase oxidative dehydrocyclization offers a promising approach for scalable lactone production from renewable, bio-based diols to enable circular polyesters.

36 MATERIALS SCIENCE↗

Mechanistic Insights on the Low-Temperature Oxidation of CO Catalyzed by Isolated Co Ions in N-Doped Carbon

Isolated cobalt ions on nitrogen-doped carbon (Co-N-C) catalyze CO oxidation at temperatures as low as 196 K, but the active site and mechanism for this reaction remain elusive. In this work, steady-state CO oxidation around 273 K over Co-N-C revealed nearly first order behavior in both CO and O 2 as well as a negative apparent activation energy. Isotopic transient analysis of the reaction confirmed a rapid turnover frequency and low surface coverage of adsorbed intermediates leading to CO 2 (< 10% of the Co). Results from kinetics experiments combined with quantum chemical calculations and molecular dynamics simulations are consistent with a reaction path involving weak adsorption of CO onto Co ions followed by a low barrier for the CO-assisted activation of weakly adsorbed O 2 . Furthermore, this proposed mechanism for dioxygen activation does not involve a redox cycle with the transition metal ion and may be important in other low temperature catalytic reactions involving O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗