SEARCH · Search NASA

Results for “parameter identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Experiments using least square lattice filters for the identification of structural dynamics

An approach for identifying the dynamics of large space structures is applied to a free-free beam. In this approach the system's order is determined on-line, along with mode shapes, using recursive lattice filters which provide a least square estimate of the measurement data. The mode shapes determined are orthonormal in the space of the measurements and, hence, are not the natural modes of the structure. To determine the natural modes of the structure, a method based on the fast Fourier transform is used on the outputs of the lattice filter. These natural modes are used to obtain the modal amplitude time series which provides the input data for an output error parameter identification scheme that identifies the ARMA parameters of the difference equation model of the modes. the approach is applied to both simulated and experimental data.

Sundararajan, N.↗

NASA NTRS1978

On-line parameter estimation using a high sensitivity estimator

An on-line parameter identification method is presented. The method is based on a recursive formulation of the maximum likelihood method, with a significant modification on the gains of the state estimator. In the conventional maximum likelihood method, the Kalman gains are used in the state estimator. This produces unbiased, minimum variance parameter estimates in the presence of process noise and measurement noise, but it also slows the convergence rate when the identification is done on-line. Here we suggest choosing the gains to maximize a measure of the sensitivities of the state estimates to parameter variations. One such criterion is to minimize the trace of the inverse information matrix. This increases the convergence rate significantly. After one or two time constants, the gains are switched to the Kalman values to assure unbiased, minimum-variance estimates. The state estimate will initially be nonoptimal, and may not be adequate for control purposes. In this case, a parallel Kalman filter which uses the identifier's parameter estimates can be used. This method is applied here for the identification of a simple first-order system, and for the identification of short-period stability derivatives of an F-8 aircraft from simulated data.

Mishne, D.↗

NASA NTRS1985

A method for high order linear system reduction and nonlinear system simplification

Least-squares-type algorithms for reducing the order of linear systems in the frequency domain and simplifying nonlinear systems in time domain are developed and demonstrated. The possible model structures are represented as nodes in a tree, and costs along the branches are assigned using the repeated-Gram-Schmidt orthogonalization procedure of Desrochers and Saridis (1980), permitting identification of the optimal n-term model by searching the tree to depth n, with no need for parameter identification. The efficiency and flexibility of the algorithms is shown in applications to the eighth-order linear system studied by Hsia (1972), a three-state eight-nonlinear-term aircraft-dynamics problem, and the related linear-controller problem (Garrard and Jordan, 1977).

Desrochers, A. A.↗

NASA NTRS2005

Active Aeroelastic Wing Aerodynamic Model Development and Validation for a Modified F/A-18A

A new aerodynamic model has been developed and validated for a modified F/A-18A used for the Active Aeroelastic Wing (AAW) research program. The goal of the program was to demonstrate the advantages of using the inherent flexibility of an aircraft to enhance its performance. The research aircraft was an F/A-18A with wings modified to reduce stiffness and a new control system to increase control authority. There have been two flight phases. Data gathered from the first flight phase were used to create the new aerodynamic model. A maximum-likelihood output-error parameter estimation technique was used to obtain stability and control derivatives. The derivatives were incorporated into the National Aeronautics and Space Administration F-18 simulation, validated, and used to develop new AAW control laws. The second phase of flights was used to evaluate the handling qualities of the AAW aircraft and the control law design process, and to further test the accuracy of the new model. The flight test envelope covered Mach numbers between 0.85 and 1.30 and dynamic pressures from 600 to 1250 pound-force per square foot. The results presented in this report demonstrate that a thorough parameter identification analysis can be used to improve upon models that were developed using other means. This report describes the parameter estimation technique used, details the validation techniques, discusses differences between previously existing F/A-18 models, and presents results from the second phase of research flights.

Cumming, Stephen B.↗

NASA NTRS2005

Active Aeroelastic Wing Aerodynamic Model Development and Validation for a Modified F/A-18A Airplane

A new aerodynamic model has been developed and validated for a modified F/A-18A airplane used for the Active Aeroelastic Wing (AAW) research program. The goal of the program was to demonstrate the advantages of using the inherent flexibility of an aircraft to enhance its performance. The research airplane was an F/A-18A with wings modified to reduce stiffness and a new control system to increase control authority. There have been two flight phases. Data gathered from the first flight phase were used to create the new aerodynamic model. A maximum-likelihood output-error parameter estimation technique was used to obtain stability and control derivatives. The derivatives were incorporated into the National Aeronautics and Space Administration F-18 simulation, validated, and used to develop new AAW control laws. The second phase of flights was used to evaluate the handling qualities of the AAW airplane and the control law design process, and to further test the accuracy of the new model. The flight test envelope covered Mach numbers between 0.85 and 1.30 and dynamic pressures from 600 to 1250 pound-force per square foot. The results presented in this report demonstrate that a thorough parameter identification analysis can be used to improve upon models that were developed using other means. This report describes the parameter estimation technique used, details the validation techniques, discusses differences between previously existing F/A-18 models, and presents results from the second phase of research flights.

Cumming, Stephen B.↗

NASA NTRS1974

Digital system identification and its application to digital flight control

On-line system identification of linear discrete systems for implementation in a digital adaptive flight controller is considered by the conventional extended Kalman filter and a decoupling process in which the linear state estimation problem and the linear parameter identification problem are each treated separately and alternately. Input requirements for parameter identifiability are established using the standard conditions of observability for a time variant system. Experimental results for simulated linearized lateral aircraft motion are included along with the effect of different initialization and updating procedures for the priming trajectory used by the filter.

Kotob, S.↗

NASA NTRS1980

System identification of large space structures

The paper deals with the problem of system identifiability for a linear dynamical system. Two theorems are given relating the sufficient condition of system identifiability for certain linear structures to the total number of inputs and outputs. The principle of least squares, that seeks the minimization of a cost function is employed to carry out the system identification process. To illustrate the concept of the paper, a structural model of a beam with point masses is examined. Parameter identification methods are studied and a random search technique is introduced.

Juang, J. N.↗

NASA NTRS1987

An adaptive control scheme for a flexible manipulator

The problem of controlling a single link flexible manipulator is considered. A self-tuning adaptive control scheme is proposed which consists of a least squares on-line parameter identification of an equivalent linear model followed by a tuning of the gains of a pole placement controller using the parameter estimates. Since the initial parameter values for this model are assumed unknown, the use of arbitrarily chosen initial parameter estimates in the adaptive controller would result in undesirable transient effects. Hence, the initial stage control is carried out with a PID controller. Once the identified parameters have converged, control is transferred to the adaptive controller. Naturally, the relevant issues in this scheme are tests for parameter convergence and minimization of overshoots during control switch-over. To demonstrate the effectiveness of the proposed scheme, simulation results are presented with an analytical nonlinear dynamic model of a single link flexible manipulator.

Yang, T. C.↗

NASA NTRS1997

Improved Estimates of Clear Sky Longwave Flux and Application to the Tropical Greenhouse Effect

The first objective of this investigation is to eliminate the clear-sky offset introduced by the scene-identification procedures developed for the Earth Radiation Budget Experiment (ERBE). Estimates of this systematic bias range from 10 to as high as 30 W/sq m. The initial version of the ScaRaB data is being processed with the original ERBE algorithm. Since the ERBE procedure for scene identification is based upon zonal flux averages, clear scenes with longwave emission well below the zonal mean value are mistakenly classified as cloudy. The erroneous classification is more frequent in regions with deep convection and enhanced mid- and upper-tropospheric humidity. We will develop scene identification parameters with zonal and/or time dependence to reduce or eliminate the bias in the clear- sky data. The modified scene identification procedure could be used for the ScaRaB-specific version of the Earth-radiation products. The second objective is to investigate changes in the clear-sky Outgoing Longwave Radiation (OLR) associated with decadal variations in the tropical and subtropical climate. There is considerable evidence for a shift in the climate state starting in approximately 1977. The shift is accompanied by higher SSTs in the equatorial Pacific, increased tropical convection, and higher values of atmospheric humidity. Other evidence indicates that the humidity in the tropical troposphere has been steadily increasing over the last 30 years. It is not known whether the atmospheric greenhouse effect has increased during this period in response to these changes in SST and precipitable water. We will investigate the decadal-scale fluctuations in the greenhouse effect using Nimbus-7, ERBE, and ScaRaB measurements spaning 1979 to the present. The data from the different satellites will be intercalibrated by comparison with model calculations based upon ship radiosonde observations. The fluxes calculated from the radiation model will also be used for validation of the ScaRaB fluxes.

Collins, W. D.↗

NASA NTRS1978

AAA gunnermodel based on observer theory

The Luenberger observer theory is used to develop a predictive model of a gunner's tracking response in antiaircraft artillery systems. This model is composed of an observer, a feedback controller and a remnant element. An important feature of the model is that the structure is simple, hence a computer simulation requires only a short execution time. A parameter identification program based on the least squares curve fitting method and the Gauss Newton gradient algorithm is developed to determine the parameter values of the gunner model. Thus, a systematic procedure exists for identifying model parameters for a given antiaircraft tracking task. Model predictions of tracking errors are compared with human tracking data obtained from manned simulation experiments. Model predictions are in excellent agreement with the empirical data for several flyby and maneuvering target trajectories.

Kou, R. S.↗

NASA NTRS1977

Aerodynamic coefficient estimation for dynamic wind tunnel models

Maximum likelihood parameter identification is used to estimate the aerodynamic coefficients of a 'flying' aircraft model which is mounted in a transonic wind tunnel by a system of cables and pulleys. The model's motion is governed by both cable and aerodynamic forces, where the parameters to be identified are functions of the aerodynamic forces but cable forces greatly predominate. The test data were successfully processed assuming a linear equation model in the identification procedure. In one instance, the procedure was able to detect a failing measurement instrument. The final parameter estimates are compared to estimates obtained in independent tests of a similar aircraft model.

Mohr, R. L.↗

NASA NTRS1982

Computation of the intervals of uncertainties about the parameters found for identification

A modeling method to calculate the intervals of uncertainty for parameters found by identification is described. The region of confidence and the general approach to the calculation of these intervals are discussed. The general subprograms for determination of dimensions are described. They provide the organizational charts for the subprograms, the tests carried out and the listings of the different subprograms.

Mereau, P.↗

NASA NTRS2011

Fundamental Rotorcraft Acoustic Modeling From Experiments (FRAME)

A new methodology is developed for the construction of helicopter source noise models for use in mission planning tools from experimental measurements of helicopter external noise radiation. The models are constructed by employing a parameter identification method to an assumed analytical model of the rotor harmonic noise sources. This new method allows for the identification of individual rotor harmonic noise sources and allows them to be characterized in terms of their individual non-dimensional governing parameters. The method is applied to both wind tunnel measurements and ground noise measurements of two-bladed rotors. The method is shown to match the parametric trends of main rotor harmonic noise, allowing accurate estimates of the dominant rotorcraft noise sources to be made for operating conditions based on a small number of measurements taken at different operating conditions. The ability of this method to estimate changes in noise radiation due to changes in ambient conditions is also demonstrated.

Greenwood, Eric↗

NASA NTRS1983

Analysis of pilot control strategy

Methods for nonintrusive identification of pilot control strategy and task execution dynamics are presented along with examples based on flight data. The specific analysis technique is Nonintrusive Parameter Identification Procedure (NIPIP), which is described in a companion user's guide (NASA CR-170398). Quantification of pilot control strategy and task execution dynamics is discussed in general terms followed by a more detailed description of how NIPIP can be applied. The examples are based on flight data obtained from the NASA F-8 digital fly by wire airplane. These examples involve various piloting tasks and control axes as well as a demonstration of how the dynamics of the aircraft itself are identified using NIPIP. Application of NIPIP to the AFTI/F-16 flight test program is discussed. Recommendations are made for flight test applications in general and refinement of NIPIP to include interactive computer graphics.

Heffley, R. K.↗

NASA NTRS1988

Characterization of damped structural connections for multi-component systems

The inability to model connections adequately has historically limited the ability to predict overall system dynamic response. Connections between structural components are often mechanically complex and difficult to accurately model analytically. Improved analytical models for connections are needed to improve system dynamic predictions. This study explores combining Component Mode Synthesis methods for coupling structural components with Parameter Identification procedures for improving the analytical modeling of the connections. Improvements in the connection stiffness and damping properties are computed in terms of physical parameters so the physical characteristics of the connections can be better understood, in addition to providing improved input for the system model.

Lawrence, Charles↗

NASA NTRS1988

Characterization of structural connections for multicomponent systems

This study explores combining Component Mode Synthesis methods for coupling structural components with Parameter Identification procedures for improving the analytical modeling of the connections. Improvements in the connection stiffness and damping properties are computed in terms of physical parameters so that the physical characteristics of the connections can be better understood, in addition to providing improved input for the system model.

Lawrence, Charles↗

NASA NTRS1989

Characterization of damped structural connections for multi-component systems

The inability to model connections adequately has historically limited the ability to predict overall system dynamic response. Connections between structural components are often mechanically complex and difficult to accurataely model analytically. Improved analytical models for connections are needed to improve system dynamic predictions. This study explores combining Component Mode Synthesis methods for coupling structural components with Parameter Identification procedures for improving the analytical modeling of the connections. Improvements in the connection stiffness and damping properties are computed in terms of physical parameters so the physical characteristics of the connections can be better understood, in addition to providing improved input for the system model.

Lawrence, Charles↗

NASA NTRS2013

Dynamic Stability Analysis of Blunt Body Entry Vehicles Using Time-Lagged Aftbody Pitching Moments

This analysis defines an analytic model for the pitching motion of blunt bodies during atmospheric entry. The proposed model is independent of the pitch damping sum coefficient present in the standard formulation of the equations of motion describing pitch oscillations of a decelerating blunt body, instead using the principle of a time-lagged aftbody moment as the forcing function for oscillation divergence. Four parameters, all with intuitive physical relevance, are introduced to fully define the aftbody moment and the associated time delay. It is shown that the dynamic oscillation responses typical to blunt bodies can be produced using hysteresis of the aftbody moment in place of the pitch damping coefficient. The approach used in this investigation is shown to be useful in understanding the governing physical mechanisms for blunt body dynamic stability and in guiding vehicle and mission design requirements. A validation case study using simulated ballistic range test data is conducted. From this, parameter identification is carried out through the use of a least squares optimizing routine. Results show good agreement with the limited existing literature for the parameters identified, suggesting that the model proposed could be validated by an experimental ballistic range test series. The trajectories produced by the identified parameters were found to match closely those from the MER ballistic range tests for a wide array of initial conditions and can be identified with a reasonable number of ballistic range shots and computational effort.

Supersonic↗