Search NASASearch

SEARCH · Search NASA

Results for “parameter transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Relationships between ERTS radiances and gradients across ocean fronts

A time series of the Loop Current in the Gulf of Mexico, covering an annual cycle of growth, spreading, and decay, has been obtained in synchronization with ERTS. Computer enhanced images, which are necessary to extract useful oceanic information, show that the current can be observed either by color or sea state effects associated with the cyclonic boundary. The color effect relates to the spectral variations in the optical properties of the water and its suspended particles, and is studied by radiative transfer theory. Significant oceanic parameters identified are: the probability of forward scattering, and the ratio of scattering to total attenuation.

Maul, G. A.

Solar one - The Delaware solar house and results obtained during the first year of operation

The design of a system which uses CdS/Cu2S solar cells to convert solar energy into electricity and heat, and which uses a heat pump for auxiliary heating and air conditioning is discussed. Salt hydrates are used for heat storage, while air serves as the heat transfer medium. The operational parameters and economic aspects of the system are examined, and preliminary test results are analyzed.

Boeer, K. W.

On the use of the earth resources technology satellite /LANDSAT-1/ in optical oceanography

Observations of the Gulf Stream System in the Gulf of Mexico were obtained in synchronization with LANDSAT-1. Computer enhanced images, which are necessary to extract useful oceanic information, show that the current can be observed by color (diffuse radiance) or sea state (specular radiance) effects associated with the cyclonic boundary even in the absence of a surface thermal signature. The color effect relates to the spectral variations in the optical properties of the water and its suspended particles, and is studied by radiative transfer theory. Significant oceanic parameters identified are: the probability of forward scattering, and the ratio of scattering to total attenuation. Several spectra of upwelling diffuse light are computed as a function of the concentration of particles and yellow substance.

Maul, G. A.

Control system design

Computer program optimizes parameters in feedback controller transfer function.

Seidel, R. C.

A discussion of dynamic stability measurement techniques

Techniques for the measurement of the dynamic stability of linear systems are discussed. Particular attention is given to an analysis of the errors in the procedures, and to methods for calculating the system damping from the data. The techniques discussed include: transient decay, moving block analysis, spectral analysis, random decrement signatures, transfer function analysis, and parameter identification methods. The special problems of rotorcraft dynamic stability testing are discussed.

Johnson, W.

A mission design for the Halley comet rendezvous using Ion Drive

The Ion Drive propulsion system, a derivative of the old Solar Electric Propulsion (SEP) technology is considered adequate to perform all mission objectives of a proposed Halley's comet rendezvous (scheduled for launch in 1982) except one: control of thermal energy from the concentrating solar arrays. This problem can be solved, however, by adding a separable tail probe to the baseline system. The system consists of an Ion Propulsion Module (IPM) and a Mission Module (MM). Scientific objectives include a determination of the structure of the comet nucleus, an evaluation of nucleus evolution, an assay of the comet's atmosphere and ionosphere, and a study of the interaction between the comet and the interplanetary medium. Attention is given to the navigation parameters necessary for heliocentric transfer and post-rendezvous circumnavigation of the comet.

Boain, R. J.

A study of the transmission characteristics of suppressor nozzles

The internal noise radiation characteristics for a single stream 12 lobe 24 tube suppressor nozzle, and for a dual stream 36 chute suppressor nozzle were investigated. An equivalent single round conical nozzle and an equivalent coannular nozzle system were also tested to provide a reference for the two suppressors. The technique utilized a high voltage spark discharge as a noise source within the test duct which permitted separation of the incident, reflected and transmitted signals in the time domain. These signals were then Fourier transformed to obtain the nozzle transmission coefficient and the power transfer function. These transmission parameters for the 12 lobe, 24 tube suppressor nozzle and the reference conical nozzle are presented as a function of jet Mach number, duct Mach number polar angle and temperature. Effects of simulated forward flight are also considered for this nozzle. For the dual stream, 36 chute suppressor, the transmission parameters are presented as a function of velocity ratios and temperature ratios. Possible data for the equivalent coaxial nozzle is also presented. Jet noise suppression by these nozzles is also discussed.

Ahuja, K. K.

Comparison of correlations of Shuttle boundary-layer transition due to distributed roughness

The transition criteria for the windward surface of the Shuttle Orbiter, which is composed of a large number of thermal protection tiles, must include the effect of distributed roughness arising from joints and possible tile misalignments. Theoretical flow-field parameters and heat-transfer distributions were used to analyze boundary-layer transition data. Data were obtained for Mach numbers from 8 to 12 over a Reynolds number range from 1.8 million to 17.6 million with surface temperatures from 0.114 to 0.435 T sub t. The transition correlations were approximately the same both for the misaligned-tile models and for the grit-roughened model. The incipient value Re sub K, tr was 15, the critical value was 85, the effective value was 190.

Bertin, J. J.

Multiple scattering effects on wave propagation due to rain

The paper examines the multiple scattering of microwaves due to rain and the resulting incoherent intensity for a plane wave incident on a plane-parallel rain region. General formulations of the transfer equation using Stokes parameters are presented, and an extinction matrix which takes into account depolarization effects and nonspherical droplet shape is introduced. Scattering characteristics are calculated for spherical droplets using the Mie solution and the Laws-Parsons distributions. The ratios of incoherent to coherent received powers are calculated at 30 GHz for rain rates of 12.5, 50, 100, and 150 mm/h, rain thicknesses of 3 km and 10 km, and fields of view of 1.5, 5, and 15 deg.

Ishimaru, A.

Multiple scattering calculations of rain effects

The multiple scattering calculations of rain effects are studied on the basis of calculating the incoherent intensity at 30, 60, 90, and 120 GHz. The Mie solution and the Laws-Parsons distribution are used to determine scattering and absorption characteristics. The equation of transfer and the Stokes parameters are used to determine incoherent intensities for the horizontal and vertical polarizations. The ratio of the copolarized incoherent intensity to the copolarized coherent intensity is defined as the incoherent copolarized discrimination. The ratio of the cross-polarized incoherent intensity is defined as the incoherent cross-polarized discrimination. These ratios are calculated in terms of copolarized attenuation, rain rate, and field of view. The results show that multiple scattering effects may become significant during heavy rains.

Ishimaru, A.

Parametric dependence of ocean wave-radar modulation transfer functions

Microwave techniques at X and L band were used to determine the dependence of ocean-wave radar modulation transfer functions (MTFs) on various environmental and radar parameters during the Marine Remote Sensing experiment of 1979 (MARSEN 79). These MIF are presented, as are coherence functions between the AM and FM parts of the backscattered microwave signal. It is shown that they both depend on several of these parameters. Besides confirming many of the properties of transfer functions reported by previous authors, indications are found that MTFs decrease with increasing angle between wave propagation and antenna-look directions but are essentially independent of small changes in air-sea temperature difference. However, coherence functions are much smaller when the antennas are pointed perpendicular to long waves. It is found that X band transfer functions measured with horizontally polarized microwave radiation have larger magnitudes than those obtained by using vertical polarization.

Plant, W. J.

ADS: A FORTRAN program for automated design synthesis, version 1.00

A new general-purpose optimization program for engineering design is described. ADS-1 (Automated Design Synthesis - Version 1) is a FORTRAN program for solution of nonlinear constrained optimization problems. The program is segmented into three levels, being strategy, optimizer, and one-dimensional search. At each level, several options are available so that a total of over 100 possible combinations can be created. Examples of available strategies are sequential unconstrained minimization, the Augmented Lagrange Multiplier method, and Sequential Linear Programming. Available optimizers include variable metric methods and the Method of Feasible Directions as examples and one-dimensional search options include polynomial interpolation and the Golden Section method as examples. Emphasis is placed on ease of use of the program. All information is transferred via a single parameter list. Default values are provided for all internal program parameters such as convergence criteria, and the user is given a simple means to over-ride these, if desired. The program is demonstrated with a simple structural design example.

Vanderplaats, G. N.

Study Proposal for the Possible Use of ISS as an Aerodynamic Facility for Aerospace Applications

In order to determine the correct design parameters for an orbital transfer vehicle (OTV) to be used in conjunction with the envisaged space station system (SSS) it is essential to know the aerodynamic coefficients in the translational flow regime of the Earth's atmosphere at approximately 80 to 200 km. Because of the inherent difficulties relating to the duplication of the abovesaid translational flow regime in a ground based aerodynamic facility, another means of making this determination had to be developed. The proposed solution is the exploitation of the tether satellite system (TSS). By employing it as a spaceborne variable low density wind tunnel, the TSS appears to be a very appealing tool for such gas dynamic research.

Buonjiolno, C.

Visual information transfer. Part 1: Assessment of specific information needs. Part 2: Parameters of appropriate instrument scanning behavior

The present study explored eye scan behavior as a function of level of subject training. Oculometric (eye scan) measures were recorded from each of ten subjects during training trials on a CRT based flight simulation task. The task developed for the study incorporated subtasks representative of specific activities performed by pilots, but which could be performed at asymptotic levels within relatively short periods of training. Changes in eye scan behavior were examined as initially untrained subjects developed skill in the task. Eye scan predictors of performance on the task were found. Examination of eye scan in proximity to selected task events revealed differences in the distribution of looks at the instruments as a function of level of training.

Comstock, J. R., Jr.

ADS: A FORTRAN program for automated design synthesis: Version 1.10

A new general-purpose optimization program for engineering design is described. ADS (Automated Design Synthesis - Version 1.10) is a FORTRAN program for solution of nonlinear constrained optimization problems. The program is segmented into three levels: strategy, optimizer, and one-dimensional search. At each level, several options are available so that a total of over 100 possible combinations can be created. Examples of available strategies are sequential unconstrained minimization, the Augmented Lagrange Multiplier method, and Sequential Linear Programming. Available optimizers include variable metric methods and the Method of Feasible Directions as examples, and one-dimensional search options include polynomial interpolation and the Golden Section method as examples. Emphasis is placed on ease of use of the program. All information is transferred via a single parameter list. Default values are provided for all internal program parameters such as convergence criteria, and the user is given a simple means to over-ride these, if desired.

Vanderplaats, G. N.

Proton radiation effects on multi-pinned-phased CCDs

Three Tektronix 1024 x 1024 multi-pinned-phased (MPP) charge coupled devices were irradiated with protons to obtain data on CCD performance degradation in a proton radiation environment. The devices were irradiated with a spectrum of energies up to 120 MeV, simulating the total radiation dose of a long-term space experiment. Basic parameters such as charge transfer efficiency, dark current, noise, and full well were measured before and after irradiation. A test was also performed to determine the effectiveness of various thicknesses of tantalum shielding in protecting the CCD from damage. Dark current increase and CTE degradation were the most noticeable effects of proton radiation. This paper will present the objectives, test data, and conclusions of the proton testing, and will identify future testing to be performed.

Murata-Seawalt, D.

Navier-Stokes analysis of turbine flowfield and external heat transfer

An explicit 2D Navier-Stokes code has been modified and used to analyze the aerodynamics and heat transfer of a transonic turbine cascade. This code is based on a four-stage Runge-Kutta scheme. An algebraic Reynolds stress model (ARSM) and two versions of low Reynolds number (LRN) two-equation turbulence models, Chien's (1982) LRN k-epsilon model and Coakley's (1983) LRN q-omega model, have been employed in the computations. The surface pressure distributions and wake profiles are predicted well by all the models. The k-epsilon model and the k-epsilon/ARSM model yield better predictions of heat transfer than the q-omega model. The k-epsilon/ARSM solutions show some significant, though not dramatic, differences in the predicted skin friction coefficients, heat transfer rates, and performance parameters, as compared to the k-epsilon model. The predicted semiwake width is consistent with the measurement and correlation.

Luo, J.

Global Ultraviolet Imaging of the Aurora from Space

Global observation of the aurora by the Ultraviolet Imager (UVI) on the Polar spacecraft has provided both the benefit of placing ground and space-based observations in the context of auroral activity as well as the ability to make quantitative measurements of important parameters that characterize energy transfer to the ionosphere. The UVI images have provided simultaneously the timing of substorm onsets, the location of auroral boundaries, the polar cap area, and changes in the intensity of auroral activity at all local times. Increased accuracy in the measurement of energy flux and characteristic energy of the precipitating electrons in conjunction with auroral precipitation models are now available at high time resolution over many hours through the use of narrow-band far ultraviolet filters on the UVI. We will discuss how ultraviolet imaging of the aurora from space has provided fresh insight into processes such as substorm energy loading and deposition, substorm triggering, and solar wind control of substorm dynamics.

Brittnacher, M. J.