Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase contrast.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Long-Range Ordered Amorphous Atomic Chains as Building Blocks of a Superconducting Quasi-One-Dimensional Crystal

Crystalline and amorphous structures are two of the most common solid-state phases. Crystals having orientational and periodic translation symmetries are usually both short-range and long-range ordered, while amorphous materials have no long-range order. Short-range ordered but long-range disordered materials are generally categorized into amorphous phases. In contrast to the extensively studied crystalline and amorphous phases, the combination of short-range disordered and long-range ordered structures at the atomic level is extremely rare and so far has only been reported for solvated fullerenes under compression. Here, a report on the creation and investigation of a superconducting quasi-1D material with long-range ordered amorphous building blocks is presented. Using a diamond anvil cell, monocrystalline (TaSe4)(2)I is compressed and a system is created where the TaSe(4)atomic chains are in amorphous state without breaking the orientational and periodic translation symmetries of the chain lattice. Strikingly, along with the amorphization of the atomic chains, the insulating (TaSe4)(2)I becomes a superconductor. The data provide critical insight into a new phase of solid-state materials. The findings demonstrate a first ever case where superconductivity is hosted by a lattice with periodic but amorphous constituent atomic chains.

combination of crystalline and amorphous structure↗
DOE OSTI2026

Beyond Contrast Transfer: Spectral SNR as a Finite-Dose Metric for STEM Phase Retrieval

The contrast transfer function (CTF) is widely used to evaluate phase retrieval methods in scanning transmission electron microscopy (STEM), including center-of-mass imaging, parallax imaging, direct ptychography, and iterative ptychography. However, the CTF reflects only the maximum usable signal, neglecting the effects of finite electron fluence and the Poisson-limited nature of detection. As a result, it can significantly overestimate practical performance, especially in low-dose regimes. Here, we employ the spectral signal-to-noise ratio (SSNR), as a finite-dose statistical framework to evaluate the recoverable signal as a function of spatial frequency. Using numerical reconstructions of white-noise objects, we show that center-of-mass, parallax, and direct ptychography exhibit dose-independent SSNRs, with close-form analytic expressions. In contrast, iterative ptychography exhibits a surprising dose dependence: at low fluence, its SSNR converges to that of direct ptychography; at high fluence, it saturates at a value consistent with the maximum detective quantum efficiency predicted by recent quantum Fisher information bounds. The results highlight the limitations of CTF-based evaluation and motivate SSNR as a more accurate, finite-dose metric for assessing STEM phase retrieval methods.

STEM phase retrieval↗
DOE OSTI2022

Pressure-induced suppression of charge density phases across the entire rare-earth tritellurides by optical spectroscopy

The rare-earth tritellurides (RTe 3 ) are a distinct class of 2D layered materials that recently gained significant attention due to hosting such quantum collective phenomena as superconductivity or charge density waves (CDWs). Many members of this van der Waals (vdW) family crystals exhibit CDW behavior at room temperature, i.e., RTe 3 compound where R = La, Ce, Pr, Nd, Sm, Gd, and Tb. Here, our systematic studies establish the CDW properties of RTe 3 when the vdW spacing/interaction strength between adjacent RTe 3 layers is engineered under extreme hydrostatic pressures. Using a non-destructive spectroscopy technique, pressure-dependent Raman studies first establish the pressure coefficients of phonon and CDW amplitude modes for a variety of RTe 3 materials, including LaTe 3 , CeTe 3 , PrTe 3 , NdTe 3 , SmTe 3 , GdTe 3 , and TbTe 3 . Results further show that the CDW phase is eventually suppressed at high pressures when the interlayer spacing is reduced and interaction strength is increased. Comparison between different RTe 3 materials shows that LaTe 3 with the largest thermodynamic equilibrium interlayer spacing (smallest chemical pressure) exhibits the most stable CDW phases at high pressures. In contrast, CDW phases in late RTe 3 systems with the largest internal chemical pressures are suppressed easily with applied pressure. Overall results provide comprehensive insights into the CDW response of the entire RTe 3 series under extreme pressures, offering an understanding of CDW formation/engineering in a unique class of vdW RTe 3 material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Berry Curvature and Spin-One Color Superconductivity

Here, we explore the interplay between Berry curvature and topological properties in single-flavor color superconductors, where quarks form spin-one Cooper pairs. By deriving a new relation, we connect the topological nodal structure of the gap function in momentum space to the (non-Abelian) Berry flux associated with paired quarks. This generalizes the early work by Li and Haldane [Phys. Rev. Lett. 120, 067003 (2018)] to systems with additional internal quantum numbers, such as color. In the ultrarelativistic limit, we uncover rich topological structures driven by the interplay of spin, chirality, and color. Specifically, we identify chirality-induced topological nodes in the transverse (opposite chirality pairing) polar and 𝐴 phases. In contrast, the color-spin-locking phase lacks these nodes due to a nontrivial color Berry flux, which in turn induces gapless excitations with total Berry monopole charges of ±3/2—differing from conventional Weyl fermions. Our findings can be potentially extended to other fermionic systems carrying additional internal degrees of freedom.

Berry curvature↗
DOE OSTI2021

Topological approach to electron correlations at fractional quantum Hall effect

Highlights: • Braids in 2D electron systems in magnetic field acquire a cyclotron metrics. • Commensurability of 2D braids with Wigner crystal of electrons leads to FQHE. • Homotopy invariants define the hierarchy of FQHE universal in all 2D Hall systems. • Composite fermions illustrate multiloop braids in the simplest homotopy case. • Correlations in FQHE reveal long-range quantum entanglement of all electrons. The classification of homotopy invariants in interacting multi-electron 2D systems at quantizing magnetic fields is presented, explaining the topologically protected correlations occurring at integer and fractional quantum Hall effects. The long-range quantum entanglement is essential for homotopy correlated phases in contrast to the binary entanglement for conventional phases with local order parameters. The classification of homotopy long-range correlated phases induced by the Coulomb interaction of electrons has been derived in terms of homotopy invariants, which are universal and robust against local disorder and single-particle crystal field, as illustrated by experimental observations in various materials with different microscopic structure, like GaAs 2DES, graphene monolayer and bilayer and in Chern topological insulators. The homotopy phases are demonstrated to be topologically protected and immune to single-particle perturbations, temperature chaos and variation of the electron interaction strength. The nonzero repulsive interaction between electrons is shown, however, to be essential for the definition of the homotopy invariants, which disappear in gaseous systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Aqueous Phase Aldol Condensation of Formaldehyde and Acetone on Anatase TiO2(101) Surface: A Theoretical Investigation

A mechanistic understanding of catalytic reactions at solid-liquid interface is limited both experimentally and theoretically but attracts much interest. Using density functional theory calculations (DFT) and ab initio molecular dynamics (AIMD) simulations, we investigated the effect of liquid water on a-H abstraction, C-C coupling, and dehydration steps of aldol condensation of formaldehyde and acetone on an anatase TiO2(101) surface. The existence of the aqueous phase lowered the Gibbs energy of activation of dehydration step pronouncedly from 187 to 74 kJ/mol through proton transfer mechanism, making the hydrogenation pathway more favorable in the aqueous phase. In contrast, a mixed route prevails in the vapor phase. This work provides insights into the effect of the bulk water through a proton transfer mechanism on the dehydrogenation, C-C coupling, and dehydration

anatase TiO2, formaldehyde and acetone, aldol cond↗
DOE OSTI2020

Neutron diffraction study of magnetic ordering in high pressure phases of rare earth metal holmium

The magnetic ordering in rare earth metals is well established for ambient pressure crystal structures, however, little is known about the magnetic ordering in their corresponding high-pressure crystalline modifications. Holmium (Ho) was studied in a large-volume diamond anvil cell at the Spallation Neutron Source to high-pressure up to 20 GPa and to low-temperature to 10 K. We have conducted two independent high-pressure low-temperature experiments under non-hydrostatic and quasi-hydrostatic pressure conditions respectively. The ambient pressure hexagonal close packed (hcp) phase of holmium shows two magnetic transitions below 10 GPa one to an incommensurate Antiferromagnetic (AFM) phase and another to a conical-Ferromagnetic (c-FM) phase. In contrast, alpha-Samarium-type (α-Sm) phase above 10 GPa and the double hexagonal close packed (dhcp) phase above 19 GPa show only one FM transition marked by the appearance of a magnetic peak at 3 Å and the concurrent enhancement of nuclear peaks below 30 K. Finally, these new transitions observed by neutron diffraction can be accounted by a commensurate superlattice formation along c-axis in both the α-Sm-type phase and the dhcp phase.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Higher-order topological corner and bond-localized modes in magnonic insulators

We theoretically investigate a two-dimensional decorated honeycomb lattice framework to realize a second-order topological magnon insulator (SOTMI) phase featuring distinct corner-localized modes. Here, our study emphasizes the pivotal role of spin-magnon mapping in characterizing bosonic topological properties, which exhibit differences from their fermionic counterparts. We employ a symmetry indicator topological invariant to identify and characterize this SOTMI phase, particularly for systems respecting time-reversal and rotational symmetry. Using a spin model defined on a honeycomb lattice geometry, we demonstrate that introducing “kekulé” type distortions yields a topological phase. In contrast, “antikekulé” distortions result in a nontopological magnonic phase. The presence of kekulé distortions manifests in two distinct topologically protected bosonic corner modes—an intrinsic and a pseudo, based on the specific edge terminations. On the other hand, antikekulé distortions give rise to Tamm/Shockley type bond-localized boundary modes, which are nontopological and reliant on particular edge termination. We further investigate the effects of random out-of-plane exchange anisotropy disorder on the robustness of these bosonic corner modes. The distinction between SOTMIs and their fermionic counterparts arises due to the system-specific magnonic onsite energies, a crucial feature often overlooked in prior literature. Our study unveils exciting prospects for engineering higher-order topological phases in magnon systems and enhances our understanding of their unique behavior within decorated honeycomb lattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Non-equilibrium states and interactions in the topological insulator and topological crystalline insulator phases of NaCd4As3

Topological materials are of great interest because they can support metallic edge or surface states that are robust against perturbations, with the potential for technological applications. Here, we experimentally explore the light-induced non-equilibrium properties of two distinct topological phases in NaCd4As3: a topological crystalline insulator (TCI) phase and a topological insulator (TI) phase. This material has surface states that are protected by mirror symmetry in the TCI phase at room temperature, while it undergoes a structural phase transition to a TI phase below 200 K. After exciting the TI phase by an ultrafast laser pulse, we observe a leading band edge shift of >150 meV that slowly builds up and reaches a maximum after ∼0.6 ps and that persists for ∼8 ps. The slow rise time of the excited electron population and electron temperature suggests that the electronic and structural orders are strongly coupled in this TI phase. It also suggests that the directly excited electronic states and the probed electronic states are weakly coupled. Both couplings are likely due to a partial relaxation of the lattice distortion, which is known to be associated with the TI phase. In contrast, no distinct excited state is observed in the TCI phase immediately or after photoexcitation, which we attribute to the low density of states and phase space available near the Fermi level. Our results show how ultrafast laser excitation can reveal the distinct excited states and interactions in phase-rich topological materials.

Angle-resolved photoemission spectroscopy↗
DOE OSTI2020

Stacking faults and alternate crystal structures for the shape-memory alloy NiTi

Here, we use ab initio calculations to study the role of stacking faults in connecting the high-temperature B2 and the theoretically predicted low-temperature B33 NiTi phases. In contrast with prior work, we describe the B 2 → B 33 phase transformation in terms of alternate bilayer shifts by 1 2 [100] on the ( 011 ) B 2 plane, obtaining a viable pathway; the same mechanism could also work with the B19 parent phase. We then examine B33-like structures built from alternate stacking sequences of B19 bilayers, constructed to have monoclinic tilt angles close to the experimentally reported NiTi B19' martensite, and find four low-energy stacking-fault variants with energies 5.8–8.5 meV/atom above the calculated B19' martensite structure, suggesting that such structures might appear as a part of the NiTi martensite phase at low temperatures. Investigating further the occurrence of specific coordinated planar shifts in NiTi systems, we report a dynamically stable NiTi B27 phase and find that it is only 1.2 meV/atom above the calculated B33 ground-state structure, thus having a potential to also play a role in NiTi martensitic phase transformation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental investigation of internal two-phase flow structures and dynamics of quasi-stable sheet cavitation by fast synchrotron x-ray imaging

The quasi-stable sheet cavitation produced in a small Venturi channel is investigated using a fast synchrotron X-ray imaging technique aided with conventional high speed photography. The use of X-rays instead of visible light solves cavitation opacity related issues, and X-ray phase contrast-based edge enhancement enables high-definition visualization of the internal two-phase morphology. The simultaneous acquisition of time-resolved velocity and void fraction fields through post-processing the recorded X-ray images reveals, for the first time, the complex diphasic flow structures inside the sheet cavity, which is essentially divided into 6 characteristic parts. Distinct from the current mainstream view, the globallysteady sheet cavitation is found to be characterized by a weak but constantly-existing re-entrant flow that can penetrate the entire cavity. The turbulent velocity fluctuations inside the sheet cavity are also investigated. The turbulence level in the reverse flow region is observed to be as low as in the outer main flow demonstrating the relatively steady status of the reentrant flow. Unlike the streamwise and cross-stream fluctuations, the shear stress appears to be weakly correlated with the velocity gradient. The collapse of vapor phase and the vaporization at the upstream cavity interface are found to be the primary causes of shear stress intensification.

42 ENGINEERING↗
DOE OSTI2020

Local Berry Phase Signatures of Bilayer Graphene in Intervalley Quantum Interference

Chiral quasiparticles in Bernal-stacked bilayer graphene have valley-contrasting Berry phases of ±2π. This nontrivial topological structure, associated with the pseudospin winding along a closed Fermi surface, is responsible for various novel electronic properties. In this work, we show that the quantum interference due to intervalley scattering induced by single-atom vacancies or impurities provides insights into the topological nature of the bilayer graphene. The scattered chiral quasiparticles between distinct valleys with opposite chirality undergo a rotation of pseudospin that results in the Friedel oscillation with wavefront dislocations. The number of dislocations reflects the information about pseudospin texture and hence can be used to measure the Berry phase. As demonstrated both experimentally and theoretically, the Friedel oscillation, depending on the single-atom vacancy or impurity at different sublattices, can exhibit N = 4, 2, or 0 additional wavefronts, characterizing the 2π Berry phase of the bilayer graphene. Our results provide a comprehensive study of the intervalley quantum interference in bilayer graphene and can be extended to multilayer graphene, shedding light on the pseudospin physics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Coarsening dynamics of ternary polymer solutions with mobility and viscosity contrasts

Using phase-field simulations, we investigate the bulk coarsening dynamics of ternary polymer solutions undergoing a glass transition for two models of phase separation: diffusion only and with hydrodynamics. The glass transition is incorporated in both models by imposing mobility and viscosity contrasts between the polymer-rich and polymer-poor phases of the evolving microstructure. For microstructures composed of polymer-poor clusters in a polymer-rich matrix, the mobility and viscosity contrasts significantly hinder coarsening, effectively leading to structural arrest. For microstructures composed of polymer-rich clusters in a polymer-poor matrix, the mobility and viscosity contrasts do not impede domain growth; rather, they change the transient concentration of the polymer-rich phase, altering the shape of the discrete domains. This effect introduces several complexities to the coarsening process, including percolation inversion of the polymer-rich and polymer-poor phases—a phenomenon normally attributed to viscoelastic phase separation.

Chemistry↗
DOE OSTI2023

Advances in understanding the changes of tropical rainfall annual cycle: a review

Abstract Aided by progress in the theoretical understanding, new knowledge on tropical rainfall annual cycle changes under a global warming background has been advanced in the past decade. In this review, we focus on recent advances in understanding the changes of tropical rainfall annual cycle, including its four distinct features: amplitude, spatial pattern shift, phase and wet/dry season length changes. Here, amplitude refers to the local summer-winter rainfall contrast and phase refers to the timing of rainfall annual cycle. In a warming climate, the amplitude is enhanced, more evidently over ocean, while the phase is delayed, mainly over land. The former is explained by the wet-get-wetter mechanism and the latter is explained by the enhanced effective atmospheric heat capacity and increased convective barrier. The phase delay over land has already emerged in the past four decades. The spatial pattern shift under warming is marked by two features: equatorward shift of the ITCZ throughout the year and the land-to-ocean precipitation shift in the rainy season. The former is explained by the upped-ante mechanism and/or related to the enhanced equatorial warming in a warmer world. The latter may be caused by the opposite land and ocean surface temperature annual cycle changes in the tropics. Over tropical rainforest regions such as Amazon and Congo Basin, the dry season has lengthened in the recent decades, but the fundamental reason is still unclear. Despite the notable progress in the research of tropical rainfall annual cycle change, many gaps remain in understanding its mechanisms, quantifying and attributing its historical emergence, narrowing the inter-model uncertainty of its future projections, and evaluating its global impact, motivating future work guided by some directions proposed in this review.

Song, Fengfei (ORCID:0000000230041749)↗
DOE OSTI2025

Multiscale structural analysis of polymorphic phase boundaries in doped antiferroelectric sodium niobate

In the current work, we have performed multiscale structural analysis of a Pb-free sodium niobate-based smart system, i.e., 0.9⁢NaNbO 3 –0.1⁢Ba 0.9 ⁢Ca 0.1 ⁢TiO 3 (NN-10BCT) reported earlier for its high ferroelectric response. We have investigated the temperature-dependent evolution of crystal structure at long, medium, and short ranges using synchrotron x-ray diffraction (SXRD), Raman scattering, and pair distribution function(PDF) techniques in conjunction with dielectric studies. Temperature-dependent synchrotron x-ray diffraction data combined with dielectric analysis suggest two unique polymorphic phase boundaries (PPB) with two coexisting ferroelectric phases stable in the wide temperature ranges. These PPBs are stable in different regions viz. (i) cryogenic temperatures with coexisting R3c and Pmc⁢2 1 phases (ii) vicinity of room temperatures with coexisting Pmc⁢2 1 and Amm2 phases. In contrast to the conclusions drawn from SXRD, PDF reveals structures having lower symmetry (with coexisting Cc+ Pmc2 1 phases at 1.7 ≤r≤ 20 Å) at short ranges for these PPBs. In conclusion, the presence of different long- and short-range symmetries (accommodating tilt-oriented ferroelectric phases) in the unique polymorphic phase boundaries makes them thermally stable and advantageous for technological applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Polyelectrolyte Complex Coacervation across a Broad Range of Charge Densities

Polyelectrolyte complex coacervates of homologous (co)polyelectrolytes with a near-ideally random distribution of a charged and neutral ethylene oxide comonomer were synthesized. The unique platform provided by these building blocks enabled an investigation of the phase behavior across charge fractions 0.10 ≤ f ≤ 1.0. Experimental phase diagrams for f = 0.30–1.0 were obtained from thermogravimetric analysis of complex and supernatant phases and contrasted with molecular dynamics simulations and theoretical scaling laws. At intermediate to high f, a dependence of polymer weight fraction in the salt-free coacervate phase (w P,c ) of w P,c ~ f 0.37±0.01 was extracted; this trend was in good agreement with accompanying simulation predictions. Below f = 0.50, w P,c was found to decrease more dramatically, qualitatively in line with theory and simulations predicting an exponent of 2/3 at f ≤ 0.25. Preferential salt partitioning to either coacervate or supernatant was found to be dictated by the chemistry of the constituent (co)polyelectrolytes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Influence of nanoscale interfaces on the dynamic deformation and spall failure of Cu–Fe alloy microstructures

Additively manufactured immiscible Cu–Fe alloys can exhibit a distribution of nanoscale interfaces due to the distribution of nanoscale clusters in the equilibrium and metastable phases. Molecular dynamics simulations investigate the role of such interfaces on the phase stability and transformation behavior during shock compression, as well as the mechanisms of damage nucleation during spall failure. The model multiphase Cu–Fe systems studied here comprise a distribution of Fe clusters in an FCC Cu matrix, as well as Cu clusters in a BCC Fe matrix. The length scales of the nanoscale clusters determine the energetics of the interfaces that can result in FCC/BCC (equilibrium) or FCC/FCC (metastable) interfaces in the Cu system matrix, and BCC/FCC (equilibrium) or BCC/BCC (metastable) interfaces in the Fe matrix. The MD simulations demonstrate that nanoscale metastable interface microstructures can induce plastic deformation and also stabilize phases or suppress phase transformations in metastable phase clusters. In contrast, equilibrium interfaces can influence phase transformation thresholds and serve as additional void nucleation sites during failure.

36 MATERIALS SCIENCE↗