Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The importance of ozone in the oxidation of sulfur dioxide in nonurban tropospheric clouds

In studies of the various possible mechanisms which contribute to the conversion of atmospheric sulfur dioxide to sulfate aerosol in the atmosphere, oxidation within the aqueous, droplet phase of tropospheric clouds has been identified as a major contributor. It has appeared that possibly much of this oxidation is by hydrogen peroxide, with the contribution from ozone being only minimal. The present investigation is concerned with the relative importance of O3 and H2O2 oxidation as a function of pH. The results of a new experimental study of the O3-S(IV) reaction in aqueous solution are presented, and potential S(IV) oxidation rates by O3 in cloud water are compared with those predicted for H2O2. The investigation indicates the potential importance of O3 as a contributor to the overall oxidative conversion of SO2 within typical nonpolluted tropospheric clouds.

Maahs, H. G.↗
NASA NTRS1979

Bi-directional four quadrant (BDQ4) power converter development

The feasibility for implementation of a concept for direct ac/dc multikilowatt power conversion with bidirectional transfer of energy was investigated. A 10 kHz current carrier was derived directly from a common 60 Hz three phase power system. This carrier was modulated to remove the 360 Hz ripple, inherent in the three phase power supply and then demodulated and processed by a high frequency filter. The resulting dc power was then supplied to a load. The process was implemented without the use of low frequency transformers and filters. This power conversion processes was reversible and can operate in the four quadrants as viewed from any of the two of the converter's ports. Areas of application include: power systems on air and spacecraft; terrestrial traction; integration of solar and wind powered systems with utility networks; HVDC; asynchronous coupling of polyphase networks; heat treatment; industrial machine drives; and power supplies for any use including instrumentation.

Schwarz, F. C.↗
NASA NTRS2007

An Overview of Space Power Systems for NASA Missions

Power is a critical commodity for all engineering efforts and is especially challenging in the aerospace field. This paper will provide a broad brush overview of some of the immediate and important challenges to NASA missions in the field of aerospace power, for generation, energy conversion, distribution, and storage. NASA s newest vehicles which are currently in the design phase will have power systems that will be developed from current technology, but will have the challenges of being light-weight, energy-efficient, and space-qualified. Future lunar and Mars "outposts" will need high power generation units for life support and energy-intensive exploration efforts. An overview of the progress in concepts for power systems and the status of the required technologies are discussed.

Lyons, Valerie J.↗
NASA NTRS1979

Solar power satellite system definition study. Volume 2, phase 1: Systems analyses tradeoffs.

A systems definition study of the solar power satellite system is presented. The satellite solar energy conversion and microwave power transmission systems are discussed. Space construction and support systems are examined including a series construction and equipment characteristics analysis. Space transportation for the satellite and the ground receiving station are assessed.

Source record↗
NASA NTRSDate not supplied

Status of Dynamic Radioisotope Power System Development for NASA Missions

Under the Radioisotope Power Systems Program, NASA and the Department of Energy have been advancing a novel Radioisotope Power System (RPS) based on dynamic energy conversion. This approach will manifest a dynamic RPS (DRPS) option with a conversion efficiency at least three times greater than thermoelectric based RPS. Significant progress has recently been made towards this end. A one-year system design phase has been completed by industry partner Aerojet Rocketdyne which resulted in a 300-We DRPS with convertor-level redundancy. In-house technology development at NASA Glenn Research Center has demonstrated the conversion devices in relevant environments and shown all requirements can be met. Progress has also been made on the control electronics necessary for dynamic energy conversion. Flight-like controllers were recently upgraded and achieved an 11-percentage-point increase in efficiency. Control architectures have been developed to handle the multi-convertor arrangements in the latest DRPS design. A system-level DRPS Testbed is being assembled now that will experimentally demonstrate the DRPS concept being pursued.

Stirling↗
NASA NTRS2020

Recover Gas from Liquids in Low Gravity

This document is the final report resulting from the work conducted by undergraduate students at the University of South Alabama during the 2019/2020 academic year. Currently, on the International Space Station a solid adsorbent material is used to remove CO 2 from cabin air; however, liquid absorbent/reactive based systems are appealing because they may offer greater CO 2 capture efficiency. When liquids are used to capture CO 2 a regeneration step is required to release the CO 2 from the fluid for subsequent processing. During regeneration aerosolized droplets of water and liquid amines are produced creating a 2-phase fluid stream. Because the CO 2 stream is to be sent to a Sabatier reactor for conversion into methane, the droplets of the water and amines must be removed, necessitating the need for a vapor/liquid separation process in a microgravity environment. This class was tasked with designing a system to separate the aerosolized droplets from the gas stream. An ionic liquid was assumed to be the amine based absorber fluid that was used to capture the CO 2 , which is a key assumption because the ionic liquid has vanishingly low vapor pressure. The lack of volatility of the ionic liquid eliminates the need to manage an aerosolized amine resulting in only an aerosolized water air separation. To solve this challenge an undergraduate class used systems engineering to design and construct a hydrophobic screen separation apparatus for a 2-phase, vapor/liquid flow. The apparatus was constructed, but initial testing was not possible due to the closure of the University labs due to the corona-virus pandemic.

T Grant Glover↗
NASA NTRS1991

Two-terminal monolithic InP-based tandem solar cells with tunneling intercell ohmic connections

A monolithic two-terminal InP/InGaAsP tandem solar cell was successfully fabricated. This tandem solar cell consists of a p/n InP homojunction top subcell and a 0.95 eV p/n InGaAsP homojunction bottom subcell. A patterned 0.95 eV n(+)/p(+) InGaAsP tunnel diode was employed as an intercell ohmic connection. The solar cell structure was prepared by two-step liquid phase epitaxial growth. Under one sun, AM1.5 global illumination, the best tandem cell delivered a conversion efficiency of 14.8 pct.

Shen, C. C.↗
NASA NTRS2006

Multiphase Flow Technology Impacts on Thermal Control Systems for Exploration

The Two-Phase Flow Facility (TPHIFFy) Project focused on bridging the critical knowledge gap by developing and demonstrating critical multiphase fluid products for advanced life support, thermal management and power conversion systems that are required to enable the Vision for Space Exploration. Safety and reliability of future systems will be enhanced by addressing critical microgravity fluid physics issues associated with flow boiling, condensation, phase separation, and system stability. The project included concept development, normal gravity testing, and reduced gravity aircraft flight campaigns, in preparation for the development of a space flight experiment implementation. Data will be utilized to develop predictive models that could be used for system design and operation. A single fluid, two-phase closed thermodynamic loop test bed was designed, assembled and tested. The major components in this test bed include: a boiler, a condenser, a phase separator and a circulating pump. The test loop was instrumented with flow meters, thermocouples, pressure transducers and both high speed and normal speed video cameras. A low boiling point surrogate fluid, FC-72, was selected based on scaling analyses using preliminary designs for operational systems. Preliminary results are presented which include flow regime transitions and some observations regarding system stability.

McQuillen, John↗
NASA NTRS1984

A numerical analysis of transient planetary waves and the vertical structure in a meso-strato-troposphere model, part 1.4A

The structure of unstable planetary waves is computed by a quasi-geostrophic model extending from the surface up to 80 km by means of eigenvalue-eigenfunction techniques in spherical coordinates. Three kinds of unstable modes of distinct phase speeds and vertical structures are identified in the winter climate state: (1) the deep Green mode with its maximum amplitude in the stratosphere; (2) the deep Charney mode with its maximum amplitude in the troposphere: and (3) the shallow Charney mode which is largely confined to the troposphere. Both the Green mode and the deep Charney mode are characterized by very slow phase speeds. They are mainly supported by upward wave energy fluxes, but the local baroclinic energy conversion within the stratosphere also contributes in supporting these deep modes. The mesosphere and the troposphere are dynamically independent in the summer season decoupled by the deep stratospheric easterly. The summer mesosphere supports the easterly unstable waves 1-4. Waves 3 and 4 are identified with the observed mesospheric 2-day wave and 1.7-day wave, respectively.

Zhang, K. S.↗
NASA NTRS1985

Polycyclic aromatic hydrocarbons and the diffuse interstellar bands

This paper discusses some of the thermodynamic and spectroscopic properties of polycyclic aromatic hydrocarbons which make them attractive candidates as carriers of the Diffuse Interstellar Bands (DIBs). It is pointed out that, in the diffuse medium, many of these species will be partially hydrogenated and positively charged, and will absorb in the visible. The observed lineshapes and widths of the DIBs can be explained by rovibronic band contours and linebroadening due to internal conversion. Since little information is available concerning the spectroscopic properties of such species in the gas phase, a considerable amount of laboratory and theoretical work is needed.

Van Der Zwet, G. P.↗
NASA NTRS1990

High-frequency ac power distribution in Space Station

A utility-type 20-kHz ac power distribution system for the Space Station, employing resonant power-conversion techniques, is presented. The system converts raw dc voltage from photovoltaic cells or three-phase LF ac voltage from a solar dynamic generator into a regulated 20-kHz ac voltage for distribution among various loads. The results of EASY5 computer simulations of the local and global performance show that the system has fast response and good transient behavior. The ac bus voltage is effectively regulated using the phase-control scheme, which is demonstrated with both line and load variations. The feasibility of paralleling the driver-module outputs is illustrated with the driver modules synchronized and sharing a common feedback loop. An HF sinusoidal ac voltage is generated in the three-phase ac input case, when the driver modules are phased 120 deg away from one another and their outputs are connected in series.

Tsai, Fu-Sheng↗
NASA NTRS2015

High Temperature Joining and Characterization of Joint Properties in Silicon Carbide-Based Composite Materials

Advanced silicon carbide-based ceramics and composites are being developed for a wide variety of high temperature extreme environment applications. Robust high temperature joining and integration technologies are enabling for the fabrication and manufacturing of large and complex shaped components. The development of a new joining approach called SET (Single-step Elevated Temperature) joining will be described along with the overview of previously developed joining approaches including high temperature brazing, ARCJoinT (Affordable, Robust Ceramic Joining Technology), diffusion bonding, and REABOND (Refractory Eutectic Assisted Bonding). Unlike other approaches, SET joining does not have any lower temperature phases and will therefore have a use temperature above 1315C. Optimization of the composition for full conversion to silicon carbide will be discussed. The goal is to find a composition with no remaining carbon or free silicon. Green tape interlayers were developed for joining. Microstructural analysis and preliminary mechanical tests of the joints will be presented.

Joining↗
NASA NTRS2017

Unusual Oxidative Limitations for Al-MAX Phases

Alumina-forming MAX phases are well-known for their excellent oxidation resistance, rivaling many metallic NiAl, NiCrAl, and FeCrAl counterparts and with upper temperature capability possible to approximately1400C. However a number of limitations have been emerging that need to be acknowledged to permit robust performance in demanding applications. Ti2AlC and Ti3AlC2 possess excellent scale adhesion, cyclic oxidation/moisture/volatility resistance, and TBC compatibility. However they are very sensitive to Al content and flux in order to maintain an exclusive Al2O3 scale without runaway oxidation of ubiquitous TiO2 transient scales. Accelerated oxidation has been shown to occur for Al-depleted, damaged, or roughened surfaces at temperatures less than 1200C. Conversely, Cr2AlC is less sensitive to transients, but exhibits volatile losses at 1200C or above if common Cr7C3 impurity phases are present. Poor scale adhesion is exhibited after oxidation at 1150C or above, where spallation occurs at the Cr7C3 (depletion zone) interface. Delayed spallation is significant and suggests a moisture-induced phenomenon similar to non-adherent metallic systems. Re-oxidation of this surface does not reproduce the initial pure Al2O3 behavior, but initiates a less-protective scale. Cr2AlC has also been shown to have good long term bonding with superalloys at 800C, but exhibits significant Beta-NiAl + Cr7C3 diffusion zones at 1100C and above. This may set limits on Cr2AlC as a high temperature TBC bond coat on Ni-based superalloys, while improving corrosion resistance in lower temperature applications.

oxidation resistance↗
NASA NTRS1983

Harnessing surface plasmons for solar energy conversion

NASA research on the feasibility of solar-energy conversion using surface plasmons is reviewed, with a focus on inelastic-tunnel-diode techniques for power extraction. The need for more efficient solar converters for planned space missions is indicated, and it is shown that a device with 50-percent efficiency could cost up to 40 times as much per sq cm as current Si cells and still be competitive. The parallel-processing approach using broadband carriers and tunable diodes is explained, and the physics of surface plasmons on metal surfaces is outlined. Technical problems being addressed include phase-matching sunlight to surface plasmons, minimizing ohmic losses and reradiation in energy transport, coupling into the tunnels by mode conversion, and gaining an understanding of the tunnel-diode energy-conversion process. Diagrams illustrating the design concepts are provided.

Anderson, L. M.↗
NASA NTRS1975

ATS-6 - Interferometer

The ATS-6 interferometer provides precision, 3-axis attitude sensing capability. It incorporates a C-band receiver which measures the phase difference of continuous ground station signals received at paired antenna elements and converts this phase difference into digital data that is transmitted to the ground, and is also used as direct input to the onboard digital operations controller for conversion to attitude information. It uses 6 onboard horn antennas, placed in the earth viewing module, with three antennas arranged along each of two orthogonal baselines parallel to the satellite pitch and roll axes, one antenna used as a measurement reference on each baseline, and the remaining two horns, placed to provide phase measurements relative to the respective reference antenna.

Isley, W. C.↗
NASA NTRS1971

Decoder for delay-modulation coded data.

A decoding technique is described for the conversion of delay-modulated digital data to nonreturn to zero (NRZ) data. A potential time-phase ambiguity in reception and decoding of delay-modulated data is resolved in real time, through monitoring the data stream for a unique waveform inherent in delay-modulated data. Statistical backup is provided.

Lewin, J.↗