Search NASA⌕ Search

SEARCH · Search NASA

Results for “plasma experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Analysing the effects of heating and gas puffing in Proto-MPEX helicon and auxiliary heated plasmas

The Material Plasma Exposure Experiment (MPEX) is being constructed at Oak Ridge National Laboratory to investigate critical fusion reactor issues, such as plasma–material interactions (PMIs) under reactor-relevant conditions and time scales. The linear device Proto-MPEX was used as a test bed to address anticipated research and development issues associated with heating scenarios and establish the physics basis for MPEX. The SOLPS-ITER code suite has been applied to understand plasma and neutral transport in Proto-MPEX and to increase confidence in predictive simulations for MPEX. Coupling between COMSOL and SOLPS is performed to implement a 2D electron heating profile of the helicon source. The simulations show reasonable agreement with the experimental data for plasma with helicon and auxiliary electron cyclotron heating (ECH). Both Bohm and constant diffusion (D$_\perp$: 0.5 m 2 s –1 and $\chi_\perp$: 1 m 2 s –1 ) simulations show similar levels of agreement with respect to the sparse experimental data available, assuming a few per cent impurity concentration. ECH significantly increases the target electron temperature, however, the target electron density is reduced compared to helicon-only heated plasmas due to an increase in flow velocity and radial losses. The simulations show that further increasing the ECH power results in an increase in the target electron density due to increased recycling flux and ionization. The results indicate that ECH significantly enhances the target heat flux, with ECH power of 50 kW increasing the target heat flux from 0.4 to 17 MW m –2 . It is found that a small amount of gas puffing (GP) near the target plate can further increase the target heat fluxes at the higher ECH power cases, but the target heat flux is reduced at higher GP conditions due to a significant reduction in electron temperature via radiation. ECH and GP scenarios can generate a higher target flux, facilitating improved PMI studies with more reactor-relevant plasma conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Weak collisionless shocks mediated by ion gyroviscosity

Collisionless shocks are ubiquitous in space and astrophysical plasmas, and they are essential dynamical features of these systems. Lacking Coulomb collisions, these shocks are mediated by the anomalous dissipation provided by nonlinear plasma instabilities. By numerically resolving the structure of a steady-state, ion gyroviscous shock, we show that ion gyroviscosity, alone, can produce weak (M≲1.1, where M is the sonic Mach number) shocks in a collisionless, magnetized plasma. We emphasize that this effect does not require an appeal to plasma microturbulence. Moreover, while most collisionless systems may be unsuitable to support purely gyroviscous shocks, we argue that gyro-viscous heating may be an overlooked mechanism, generally; and it may be a key driver within magnetohydrodynamic shocks at large. In conclusion, representative examples include the plasma environments produced on the plasma liner experiment and the magnetized liner inertial fusion platforms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Free space Thomson scattering to study high energy density shocks

A free space collective Thomson scattering system has been developed to study pulsed power produced plasmas. While most Thomson scattering diagnostics on pulsed power machines use a bundle of fibers to couple scattered light from the plasma to the spectrometer, this system used free space coupling of the light, which enabled a spatially continuous image of the plasma. Initial experiments with this diagnostic were performed on an inverse wire array generated by a 200 kA, 1100 ns rise time pulse power generator. The capabilities of this diagnostic were demonstrated by using the low frequency ion acoustic wave feature of the Thomson scattering spectra to measure the plasma flow velocity. The diagnostic was demonstrated to measure velocities between 20 and 40 km/s with an error of 4.7 km/s when fitting with a 600 μm spatial resolution or 8.9 km/s when fitting with a 150 μm spatial resolution. In some experiments, the diagnostic observed a bow shock in the plasma flow as the scattering intensity increased and flow velocity decreased.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Data from a multi-year targeted proteomics study of a longitudinal birth cohort of type 1 diabetes

The deployment of liquid chromatography-mass spectrometry-based plasma proteomics experiments in a large cohort is sparse, leading to a lack of data available for benchmarking, method development or validation. Comprised of 6,426 plasma analyses, The Environmental Determinants of Diabetes in the Young (TEDDY) proteomics validation study constitutes one of the largest targeted proteomics experiments in the literature to date. The proteomics data from this study were generated over the course of 2.5 years from over 900 study subjects, each providing up to 29 longitudinal samples. The data also includes 916 quality control samples. The targeted mass spectrometry assay was comprised of 694 peptides mapping to 167 proteins and the panel was measured in each subject and QC sample. The targeted proteomic dataset presented here can be used as a resource for new computational method development, such as for batch correction, as well as for benchmarking and comparing the performance of different methods/tools.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Evolution of intermittent filaments in the scrape-off layer of NSTX

Filamentary structures naturally arise from background turbulence in the scrape-off layer (SOL) of plasmas, leading to significant particle and heat transport that can degrade overall plasma confinement. This enhanced transport can contribute to unacceptably high heat loads on plasma-facing components. As such, understanding the physics of SOL plasma filaments is critical for predicting and mitigating their effects in future fusion devices. On the National Spherical Torus Experiment (NSTX), plasma filaments—commonly referred to as “blobs”—were investigated using the gas-puff imaging (GPI) diagnostic in the edge and SOL regions. The analysis involved identifying, segmenting, and tracking the characteristic contours of the blobs in each frame of the GPI video sequences. Their evolution was characterized through shape descriptors, velocity, and angular velocity derived from their contour coordinates. The results indicate that as the blob area increases, their shapes become more concave and less circular, suggesting reduced structural stability in larger blobs. This result aligns with previous theoretical results where it was shown that larger blobs are more susceptible to instabilities [Krasheninnikov et al., J. Plasma Phys. 74, 679–717 (2008) and D'Ippolito et al., Phys. Plasmas 18, 060501 (2011)]. A positive correlation was observed between radial velocity and radial position, suggesting radially outward acceleration of the filaments, potentially driven by decreasing viscous drag toward the far SOL. Interestingly, blobs in background SOL turbulence exhibited minimal spinning in contrast to filaments originating from edge localized modes, which show substantial rotation during their paths [Lampert et al., Phys. Plasmas 29, 102502 (2022)]. Statistical analysis of the solidity and total curvature shape descriptors, along with their temporal evolution, revealed relatively broad, near-Gaussian distributions. This suggests that blob morphology is strongly influenced by stochastic turbulent processes in the surrounding plasma environment. Blob parameters were also compared with bulk plasma and radial profile measurements. Notable trends were found between blob rotation and poloidal velocity with collisionality and line-integrated density. These findings contribute to a deeper understanding of blob dynamics and provide valuable insights for refining SOL turbulence models.

Covariance and correlation↗
DOE OSTI2023

Hypervelocity impact in stellar media: heat shielding, shock fronts and ablation clouds

The Frontier Plasma Science experiments proposed by our team will model the processes occurring during spacecraft atmospheric entries and meteorite planetary collisions by inserting material targets into the Scrape off Layer (SOL) and edge plasma of a tokamak. This project will investigate important plasma-material processes during high-enthalpy atmospheric entries, including heat flux generation and material ablation. Of particular interest is to explore heat and particle flux detachment in front of the sample using concepts and techniques developed in the latest studies of divertor detachment. Exploration missions to the Solar System’s gaseous giants and hyperbolic re-entries into the Earth’s atmosphere require spacecraft that can withstand high velocity (>10 km/s), high heat fluxes (>10 MW/m2), and corresponding enthalpies. Ablative materials have been used as thermal shields to protect the spacecraft from severe heating during entry. However, developing high enthalpy ablating materials is challenging due to the lack of adequate ground testing facilities. Our team stated that the performance of candidate shielding materials could be assessed in a laboratory environment with multiple in-situ diagnostics, which was enabled by the progress in the tokamak research. Modern machines feature relatively long discharges (~10 s) with well-controlled stable plasma conditions at the edge where the heat flux and the flow speed are similar to those experienced during atmospheric entries. The experiments were carried out at the DIII-D National Fusion Facility in San Diego, CA, operated by General Atomics (GA) for the DoE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Inelastic Neutron Scattering Observation of Plasma-Promoted Nitrogen Reduction Intermediates on Ni/γ-Al 2 O 3

Plasma-assisted catalysis is an emerging technology for the atmospheric pressure and low bulk gas temperature synthesis of ammonia from molecular nitrogen and hydrogen. Direct evidence for plasma-induced surface reaction intermediates relevant to ammonia production, including surface hydrides and NH x (x = 1, 2, 3) species, has remained elusive. In this work, we report inelastic neutron scattering (INS) observations of alumina-supported Ni particles after treatment with N 2 and H 2 plasmas. INS experiments reveal the presence of NH x species and hydrides on Ni sites after exposure to sequential N 2 and H 2 plasma treatments. By separating exposure, we exclude the presence of plasma-phase reactions and demonstrate that these species are generated through plasma-facilitated surface reactions. Computed synthetic INS spectra of NH 3 , NH 2 and NH adsorbates on Ni support the experimental assignments of surface intermediates. The results directly implicate plasma stimulation of dinitrogen in generation of surface-bound nitrogen that participates in further hydrogenation reactions driven either thermally or with H 2 plasma.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impurity transport in PISCES-RF

Linear plasma devices (LPD) utilizing a helicon plasma source, a high density light ion source, can generate impurities due to progressive erosion of the radio frequency (RF) transmission window caused by rectified sheath voltage. These source-born impurities can entrain and be transported by the plasma toward a target, affecting plasma-material interaction studies. Earlier work on material testing in Prototype-Materials Plasma Exposure eXperiment at ORNL revealed significant source impurity deposition on downstream targets. However, using a similar RF source, no target impurity deposition is observed in Plasma Interaction Surface Component Experimental Station (PISCES)-RF despite evidence of RF window erosion in the source region, thereby motivating the present work. Experimentally, using various magnetic field configurations upstream of the PISCES-RF plasma source and seeding titanium (Ti) impurities at various axial locations, impurity transport and deposition along the machine axis were investigated. It was found that Ti deposition was localized to the side of the plasma source where the Ti impurity was seeded. In contrast, aluminum (Al) deposition, originating from the sputtering of the helicon window, occurred predominantly upstream of the plasma source, suggesting an asymmetry in the axial transport of eroded RF window material. These observations suggest a stagnation of the parallel plasma flow immediately downstream of the plasma source, with impurity ions remaining unmagnetized near the source upstream. Al deposition in magnetic field-free regions in PISCES-RF indicates that sputtered Al impurities likely remained neutral due to their large ionization mean-free path under PISCES-RF conditions. Plasma modeling and simulation supported this, indicating that Al-neutrals transport toward the helicon source upstream for low electron density cases. It was found that the Larmor radius of the Al ions was greater than the plasma radius towards the source upstream and remained weakly magnetized in PISCES-RF, meaning that plasma source-born impurities are not efficiently entrained in the plasma flow. These findings provide critical insights into impurity transport in helicon plasma-based LPDs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

SOMAFOAM: An OpenFOAM based solver for continuum simulations of low-temperature plasmas

Here, we report the development of SOMAFOAM, a finite volume framework for performing continuum simulations of low-temperature plasmas. The primary goal of this work is to discuss the features of SOMAFOAM along with representative results provided as examples for a range of operating conditions and geometries. This includes plasma and plasma–dielectric systems operating in direct current, radio frequency, and microwave regimes from pressures as low as 100 mTorr to atmospheric pressure. The code has several useful features including the ability to run massively parallel simulations using arbitrary geometries, structured/unstructured meshes, choice of models such as drift–diffusion/full-momentum at runtime, and species-dependent timesteps to name a few. The verification/validation studies presented include comparison with previously published continuum simulations (low-pressure direct current and radio frequency plasma), with experiments (Gaseous Electronics Conference Reference Cell and microwave microplasma ignited in a split ring resonator), and previously published kinetic simulations (low-pressure radio frequency plasma). Other examples provided include a direct current atmospheric pressure microplasma bounded by dielectric sidewalls and a helium–nitrogen plasma ignited using a needle electrode facing a dielectric. The performance of the code is also discussed with serial and distributed memory parallel runs demonstrated up to 512 cores. The design and implementation of the code in a modular object-oriented framework allows for easy extension and seamless coupling with other codes and can be expected to play an important role in both academia and industry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Divertor detachment characterization in negative triangularity discharges in DIII-D via 2D edge-plasma transport modeling

Edge fluid modeling of the first divertor-plasma detachment experiments in negative triangularity (NT) discharges in the DIII-D tokamak is presented using the 2D multifluid edge transport code UEDGE, including cross-field particle drifts. Experiments were performed where the lower single-null magnetic equilibrium had a strong NT (δ≈−0.5), that is, where the magnetic X-point is at a larger major radius than the core magnetic axis. Divertor-plasma detachment was induced by increasing the core plasma density in DIII-D via intrinsic gas puffing. Here density scans are performed with UEDGE to reach a detached plasma and to quantitatively recover the experimental rollover of the ion saturation current on the outer divertor target plate. The simulations cover experiments with both signs of the toroidal magnetic field, B T , where the ion magnetic Grad-B drifts are directed into (forward B T ) and out of (reverse B T ) the divertor region. Consistent with experiments with neutral beam power injection, the NT simulations reproduce: 40% higher density is needed to reach detachment onset with forward B T compared with reverse B T , and the absence of deep detachment is found with reverse B T . Similarly, comparison between Ohmic discharges in NT and positive triangularity (PT) shaping confirms that a substantially higher density is needed to achieve detachment in NT than in PT, with NT requiring an line-average density of at least the Greenwald density or higher. Simulation results suggest that higher densities are needed to reach detachment in negative compared to PT because these discharges have a shorter midplane-to-target distance along the total magnetic field B, a shorter outer divertor poloidal leg length (0.06 m vs 0.2 m), and reduced radial transport [near-scrape-off layer (SOL) D ⊥ /χ ⊥ =0.3/0.5 vs D ⊥ /χ ⊥ =1.0/1.0, all in (m 2 /s)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Improved signal stability in inductively coupled plasma–atomic emission spectrometry through use of tandem spray chambers and surfactant addition

A search for causes of intermittent mid-term (about two hours) instability in emission signals from an inductively coupled plasma led to adoption of a tandem spray-chamber arrangement and subsequently to use of a surfactant (Triton X-100) to mitigate the remaining and newly found instabilities. Through a series of investigations, abrupt signal excursions in the tandem setup were traced to droplet coagulation and drainage inside the glass tube that connected the two spray chambers. However, the signal shifts were not the result of sample-solution release directly but rather to the influence of the underlying factors on plasma behavior. Experiments tailored to the study included not only examination of temporal signal behavior but also collection of long-term videos and measurement of radiofrequency characteristics of the plasma. The addition of a surfactant, Triton X-100, for signal-stability improvement is applicable not only to systems that employ tandem spray chambers but also to conventional single Scott-type chamber arrangements. Further, use of the surfactant was unsuccessful in overcoming “acid effects”, either of the steady-state or transient nature, and did not alter plasma background or analyte signals significantly.

Inductively coupled plasma–atomic emission spectro↗
DOE OSTI2021

Characterizing the plasma-induced thermal loads on a 200 kW light-ion helicon plasma source via infra-red thermography

The light-ion helicon plasma source of the Proto-MPEX linear plasma device has been recently upgraded to enable pulsed (0.5–1 s) operation up to 200 kW. The main objective of this work is to report on the plasma-induced surface heat fluxes incident on the helicon window during high power operation (60–150 kW net power) for the purpose of the design of the upcoming material plasma exposure eXperiment (MPEX). The IR imaging system and associated physics models for the extraction of surface heat fluxes are presented. Furthermore, experimental results demonstrate that the control of the plasma strike point via magnetic flux mapping and the use of dedicated limiters is effective at reducing the heat loads on the dielectric window. Moreover, it is found that the flux mapping must create a gap between the plasma and the dielectric window of at least the plasma radial decay length. Extrapolated to 200 kW net RF power, this mode of operation can reduce the power lost to the dielectric window by 33%. The results presented have direct application to the design of high-powered helicon plasma sources that operate in a steady state. Examples include linear divertor simulators such as MPEX, electric thrusters, negative ion sources for NBI and linear plasma–material interaction test stands.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Flow Z-pinch plasma production on the FuZE experiment

The Fusion Z Pinch Experiment (FuZE) investigates sheared-flow stabilization of classic m = 0 and m = 1 instabilities in Z pinches with an embedded axial flow. FuZE consists of a 100 cm coaxial plasma accelerator, where neutral gas is ionized and accelerated in a pulsed electrical discharge, followed by a 50 cm assembly region, where pinches are formed. Maintaining the pinch requires continuous plasma injection provided by a deflagration mode in the coaxial accelerator. Two discharge modes, with and without deflagration, are investigated on FuZE. Pinch formation is observed with deflagration only. Plasma velocities in the assembly region are found to match the E × B velocity estimated in the accelerator based on a 1D circuit model, indicating that a 1D MHD approximation may offer a valid description of the plasma in the accelerator channel. The velocity of magnetic field propagation is found to agree with the snowplow model based on momentum conservation, and the lifetime of the pinch is shown to be in agreement with constraints imposed by mass conservation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Report on the Second MPEX User Research Forum

The Material Plasma Exposure eXperiment (MPEX) User Research Forum (MURF), a 2 day workshop, was held virtually on September 13–14, 2021, to seek community input for MPEX, a new high-power linear plasma device that is currently being built at Oak Ridge National Laboratory (ORNL). This was the second MURF workshop. The first MURF workshop was held in October 2019 in La Jolla, California, and focused exclusively on the definition of the surface analysis station for MPEX. MPEX is designed to address crucial R&D gaps in plasma material interactions (PMI) for future fusion reactors. The MPEX plasma source and heating systems will allow plasma exposures of plasma-facing materials and components to prototype fusion reactor divertor plasma conditions. The MPEX design accommodates the introduction of previously neutron-irradiated materials for fusion reactor-relevant plasma exposures. This capability will be unique worldwide. The US fusion program has advocated for such a device in numerous community reports in recent years, and now ORNL is building this new device. MPEX is a Major Item of Equipment project executed by the US Department of Energy’s Office of Science Fusion Energy Sciences.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Observations of a plectonemic configuration in a stable magnetized plasma jet

Astrophysical jets are collimated high-speed outflows emerging from spinning and accreting matter around celestial objects and may spontaneously result from self-organized processes. Magnetic self-organization is commonly observed in laboratory plasma physics experiments; however, they require close-fitting flux conservers to constrain and stabilize the toroidal or cylindrical structures. Here we report the first observations of a long, stable, free-boundary plasma jet far from chamber walls, embedding a double-helix magnetic structure resembling a force-free plectonemic Taylor state. The jets arise from an experimental setup that mimics an accretion disk and has no close-fitting solid flux conserver. The results support the hypothesis that self-organization could be a universal, intrinsic explanation for jet formation, collimation, and stability and may help explain double-helix features in celestial observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Ion cyclotron heating at high plasma density in Proto-MPEX

The physics of ion cyclotron heating (ICH) relevant to the steady-state linear machine MPEX (Material Plasma Exposure eXperiment) has been explored in its predecessor, short-pulse device: Proto-MPEX. MPEX will utilize fundamental ICH to increase heat flux at the target and produce ion temperatures and velocity distributions with improved fidelity to those found in a tokamak divertor region, in comparison to those produced by substrate biasing. In the experiments on Proto-MPEX described here, bulk ion temperatures up to ~15 eV have been achieved with 20 kW net ICH power at 6.5 MHz, using ICH heating of a deuterium plasma produced by a helicon plasma source. The heat flux at the target has been observed to increase throughout the plasma cross section, including in the core region. Core $T_i$ and target heat flux are observed to scale linearly with injected ICH power. Further, measurements of plasma loading and target heat flux as a function of the magnetic field strength at the antenna, together with modeling of the wave propagation from the antenna to the ion cyclotron resonance using the ANTENA and COMSOL codes with a warm plasma dielectric tensor, indicate that power is coupled to the core plasma via fast wave excitation of a kinetic Alfvén wave.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A self-consistent Hamiltonian model of the ponderomotive force and its structure preserving discretization

In the presence of an inhomogeneous oscillatory electric field, charged particles experience a net force, averaged over the oscillatory timescale, known as the ponderomotive force. We derive a one-dimensional Hamiltonian model which self-consistently couples the electromagnetic field to a plasma which experiences the ponderomotive force. We derive a family of structure preserving discretizations of the model of varying order in space and time using conforming and broken finite element exterior calculus spectral element methods. In all variants of our discretization framework, the method is found to conserve the Casimir invariants of the continuous model to machine precision and the energy to the order of the splitting method used.

Physics↗
DOE OSTI2026

CHEQUP v0.1

CHEQUP (Castro-based Hofi Expansion with QUasineutral Plasma) is a simulation code for modeling the formation of hydrodynamic optical-field-ionized (HOFI) plasma channels, which are used as waveguides in laser-plasma acceleration experiments. This includes experiments performed at LBNL's BELLA facility as well as other laser facilities across the world. CHEQUP extends the open-source Castro hydrodynamics framework with physics modules tailored for modeling HOFI plasma channels -- including multi-species ionization and three-body recombination for mixtures of hydrogen, nitrogen, helium, and argon ; a two-temperature model tracking electron and heavy-species temperatures separately ; and coupling with other codes of the BLAST ecosystem (https://blast.lbl.gov/) such as WarpX, via the openPMD standard. CHEQUP inherits from Castro the ability to run on modern GPU architectures (NVIDIA CUDA, AMD HIP) and supports adaptive mesh refinement (AMR) for efficient multi-scale resolution. Compared to existing tools, CHEQUP would be, to our knowledge, the first open-source code implementing the full HOFI channel formation physics, and the first implementation capable of running on GPUs. This enables significantly faster, large-scale parameter scans critical for the design of next-generation LPA-based accelerators and light sources.

Lehe, Remi [Lawrence Berkeley National Laboratory ↗