SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This paper reports an analysis of polarimetric hyperspectral imagery of an outdoor scene containing a number of inactive mines. The imagery was taken with a visible/near-infrared acousto-optic tunable filter prototype system. The result has illustrated that the characteristics of mine smooth surfaces can create high signals in polarization difference images and consequently provide a quick and reliable approach for detection.
The SR 24 multistar system hosts both circumprimary and circumsecondary disks, which are strongly misaligned with each other. The circumsecondary disk is circumbinary in nature. Interestingly, both disks are interacting, and they possibly rotate in opposite directions. To investigate the nature of this unique twin disk system, we present 0.″1 resolution near-infrared polarized intensity images of the circumstellar structures around SR 24, obtained with HiCIAO mounted on the Subaru 8.2 m telescope. Both the circumprimary disk and the circumsecondary disk are resolved and have elongated features. While the position angle of the major axis and radius of the near-IR (NIR) polarization disk around SR 24S are 55° and 137 au, respectively, those around SR 24N are 110° and 34 au, respectively. With regard to overall morphology, the circumprimary disk around SR 24S shows strong asymmetry, whereas the circumsecondary disk around SR 24N shows relatively strong symmetry. Our NIR observations confirm the previous claim that the circumprimary and circumsecondary disks are misaligned from each other. Both the circumprimary and circumsecondary disks show similar structures in 12CO observations in terms of its size and elongation direction. This consistency is because both NIR and 12CO are tracing surface layers of the flared disks. As the radius of the polarization disk around SR 24N is roughly consistent with the size of the outer Roche lobe, it is natural to interpret the polarization disk around SR 24N as a circumbinary disk surrounding the SR 24Nb─Nc system.
Skylight polarization, which varies with the position of the sun in the sky, influences the contrast of oil on water. Good contrast is most consistently obtained by viewing in azimuth directions toward or away from the sun. Contrast is enhanced by imaging selected polarization components and by taking the difference between orthogonal polarization components.
Scheduled to launch in late 2021,the Imaging X-ray Polarimetry Explorer (IXPE) is a Small Explorer Mission designed to open up a new window of investigation --X-ray polarimetry. The IXPE observatory features 3 identical telescopes each consisting of a mirror module assembly with a polarization-sensitive imaging x-ray detector at its focus. An extending boom, deployed on orbit, provides the necessary 4 m focal length. The payload sits atop a 3-axis stabilized spacecraft which, among other things, provides power, attitude determination and control, commanding, and telemetry to the ground. During its 2-year baseline mission, IXPE will conduct precise polarimetry for samples of multiple categories of x-ray sources, with follow-on observations of selected targets. IXPE is a partnership between NASA and the Italian Space Agency (ASI).
The reversal of the solar polar magnetic field is notoriously hard to pin down due to the extreme viewing angle of the pole. In Cycle 24, the southern polar field reversal can be pinpointed with high accuracy due to a large-scale pseudostreamer that formed over the pole and persisted for approximately a year. We tracked the size and shape of this structure with multiple observations and analysis techniques including PROBA2/SWAP EUV images, AIA EUV images, CoMP polarization data, and 3D tomographic reconstructions. We find that the heliospheric field reversed polarity in February 2014, whereas in the photosphere, the last vestiges of the previous polar field polarity remained until March 2015. We present here the evolution of the structure and describe its identification in the Fe XII 1074nm coronal emission line, sensitive to the Hanle effect in the corona.
Explore the source record for details and available documents.
We report on the energetics of the 2012 March 12 polar coronal mass ejection (CME) originating from a southern latitude of approximately 60deg. The polar CME is similar to low-latitude (LL) CMEs in almost all respects: three-part morphology; post-eruption arcade (PEA), CME, and filament kinematics; CME mass and kinetic energy; and the relative thermal energy content of the PEA. From polarized brightness images, we estimate the CME mass, which is close to the average mass of LL CMEs. The CME kinetic energy (3.3 × 10(sup 30) erg) is also typical of the general population of CMEs. From photospheric magnetograms, we estimate the free energy (1.8 × 10(sup 31) erg) in the polar crown source region, which we find is sufficient to power the CME and the PEA. About 19% of the free energy went into the CME kinetic energy. We compute the thermal energy content of the PEA (2.3 × 10(sup 29) erg) and find it to be a small fraction (6.8%) of the CME kinetic energy. This fraction is remarkably similar to that in active region CMEs associated with major flares. We also show that the 2012 March 12 is one among scores of polar CMEs observed during the maximum phase of cycle 24. The cycle 24 polar crown prominence eruptions have the same rate of association with CMEs as those from LLs. This investigation supports the view that all CMEs are magnetically propelled from closed field regions, irrespective of their location on the Sun (polar crown filament regions, quiescent filament regions, or active regions).
A study of images of the polar regions shows that small craters near the poles of the Moon are distinguished by the following features: 1. they have a smoother shape - see Fig (a); 2. patterned ground (“wrinkled skin”) is often observed in and around the crater - see Figs (a,b,c); 3. outside the craters landslides and cracks are noticeable - see Fig (d); 4. layers or scarps are often visible on the inner slope - see Fig (e). These features (scarps and patterned ground) are typical for Martian craters in the permafrost zone (see Fig f), as well as for similar zones on Earth. It is hypothesized that these features of lunar craters are associated with the presence of permafrost in the polar regions of the Moon. In 2023, the VIPER rover will investigate the distribution of ice (volatile) deposits in the region of the Moon's South Pole. VIPER navigation cameras represent a unique opportunity for the geomorphological analysis of the lunar surface and the study of physical properties of regolith due to multiple key factors: - A large number of high-quality digital images with a good resolution of the South Pole of the Moon, which is a key region for the landing of manned expeditions. - A low position of the Sun, which generates long shadows, creates favorable conditions for object recognition algorithms. - A presence of a rover track in the images enables VIPER wheels to be used as tools for the study of the regolith and the development of a geotechnical model of regolith in the South Pole region. Rover navigation cameras will allow investigation of the distribution and shape of small craters and other structures along the path of the rover and test the hypothesis about geomorphological signatures of permafrost in the lunar polar areas. If a relationship between characteristics of lunar craters and the distribution of permafrost is confirmed, this will open a possibility to remotely determine the deposits of lunar ice from satellite imagery.
Solar wind IMF and plasma conditions surrounding the January 10-11 magnetic cloud event provided very interesting observations relating to magnetospheric and ionospheric processes. Prior to the arrival of the magnetic cloud a shock front followed by abrupt swings in the IMF orientation were observed by the Wind spacecraft at about 100 Re upstream. The Polar Ultraviolet Imager (UVI) near apogee over the northern hemisphere recorded the encounter of the shock with the magnetosphere. Enhancement of dayside precipitation around noon MLT and progression of the enhancement along dawn and dusk flanks of the oval culminating in a very localized pseudo onset near midnight MLT were observed. During the following mainly northward IMF the polar cap region was the site of multiple sunward aligned arcs and curled arc structures that persisted until the IMF turned rapidly southward. While the IMF remained southward the polar cap cleared of arc structures and expanded, and the auroral oval became very thin. No substorms were observed for at least 25 minutes after the following northward turning contrary to what might be expected on the basis of recent reports of substorm initiation by northward turning of the IMF. These observations and others during the magnetic cloud event provide a clear case study of the effect of the solar wind on dayside precipitation, thickness of the boundary layer, magnetosphere-polar cap magnetic topology and sources of the polar cap precipitation, and triggering of substorms. These issues will be discussed along with the presentation of the UVI auroral observations and solar wind measurements.
We have been studying how substorms work by examining the global polar Ultraviolet Imager (UVI) images in correlation with observations from the ground, interplanetary space and the geomagnetic tail between 10-20 earth radii. One of the objectives of our study is to better understand the connection among many complex phenomena going on close to Earth and those in the distant plasma sheet. We have studied, for example, how the aurora[ and polar cap boundaries at different local times behave in relation to variations observed in the solar wind and plasma sheet during substorms. Preliminary results indicate that the polar cap and auroral oval boundaries expand and contract in a complicated but systematic way. These variations are correlated to solar wind parameters, and thinning and recovery phenomena in the plasma sheet. These results will be presented and interpreted in terms of directly driven and/or unloading substorm processes.
Filled arrays of bolometers are currently being employed for use in astronomy from the far-infrared through millimeter portion of the electromagnetic spectrum. Because of the large range of wavelengths for which such detectors are applicable, the size of a pixel (p) relative to the wavelength (lambda) will vary according to the specific application of a given available technology. As the pixel size becomes comparable to a wavelength of the absorbed radiation, correlations in the radiation field at the pixel can affect the imaging properties of the system independent of the correlations introduced by the front-end optics. We study the dependence of image fidelity and induced polarization on the size of the pixel by employing a formalism in which diffraction due to the pixel boundary is treated by propagating the second-order statistical correlations of the radiation field through a model optical system. We construct simulated polarized images of square pixels for various ratios of p lambda. For the limit in which few modes are supported by the pixel (p lambda lesssiml), we find that the diffraction due to the pixel edges is non-negligible and hence must be considered along with the telescope diffraction pattern in modeling the ultimate spatial resolution of an imaging system. For the case in which the pixel is over-moded (p lambda ggl), the geometric limit is approached as expected. This technique provides a quantitative approach to understand and optimize the imaging properties of planar detectors in the few-mode limit.
Expected to launch in 2021 Spring, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Astrophysics Small Explorer Mission with significant contributions from the Italian space agency (ASI). The IXPE observatory features three identical x-ray telescopes, each comprised of a 4-m-focal-length mirror module assembly (MMA, provided by NASA Marshall Space Flight Center) that focuses x rays onto a polarization-sensitive, imaging detector (contributed by ASI-funded institutions). This paper summarizes the MMA’s design, fabrication, alignment and assembly, expected performance, and calibration plans.
Expected to launch in December 2021, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Astrophysics Small Explorer Mission with significant contributions from the Italian space agency (ASI). Three identical x-ray telescopes combine to form the IXPE Observatory. Each is comprised of a 4-m-focal length mirror module assembly (MMA, provided by Marshall Space Flight Center) that focuses x-rays onto a polarization-sensitive, imaging detector (contributed by ASI-funded institutions). This paper describes the now-completed assembly process for the 3 flight and one spare mirror modules, and compares as-tested calibrated performance with as-built metrology data. Unexpected challenges and lessons-learned are also discussed.
The NASA Exoplanet program and the Cosmic Origins program are exploring technical options to combine the visible to NIR performance requirements of a space coronagraph with the general astrophysics requirements of a space telescope covering the deep UV spectrum. Are there compatible options in terms of mirror coatings and telescope architecture to satisfy both goals? In this paper, we address some of the main concerns, particularly relating to polarization in the visible and throughput in the UV. Telescope architectures employing different coating options compatible with current technology are considered in this trade study.
The polar cap region in the 30 to 60 minute period prior to the onset of the auroral substorm has been examined using global images from the Polar Ultraviolet Imager (UVI) to look for observational evidence of processes related to the substorm growth phase. In particular, the area of the polar cap has been measured to determine changes in its size in relation to the orientation of the interplanetary magnetic field (IMF). It was found that the size of the polar cap region increases during the growth phase even if the IMF has no southward component. Three phenomena have been observed to produce the increase in the size of the polar cap: (1) motion of the auroral oval to lower latitude, (2) thinning of the auroral oval, and (3) reduction of intense auroral precipitation in the polar cap region. The first phenomenon has been considered to be a result of the growth of the tail lobe magnetic field and the second is related to the thinning of the plasma sheet. Both of these have been supported by in situ observational evidence and are consistent with current models of substorm development. However, the third phenomenon appears to be unrelated to the first two and does not appear to be the result of opening of the polar cap flux tubes to the solar wind IMF. This reduction of auroral precipitation provides evidence of a growth phase process, or change in auroral precipitation processes, that is not explained by current substorm models.
This paper reports the results of imaging polarimetry of FSC10214+4724, carried out in the continuum at an observed wavelength of 437nm using the HST's Faint Object Camera (FOC).
Collisionless shocks form ahead of coronal mass ejections (CMEs) when the CME speed exceeds the Alfven speed of the ambient plasma in the corona and interplanetary medium. The shock stands at a distance from the CME flux rope that depends on the shock Mach number, the geometry of the driver, and the adiabatic index. While the shock ahead of the CME has been observed for a long time in the in situ data, it has been identified recently near the Sun in the coronagraphic and EUV images. Unlike in situ observations, the imaging observations are two dimensional, so one can better discern the CME-shock relationship near the Sun. Gopalswamy and Yashiro demonstrated that the coronal magnetic field can be derived from the shock standoff distance measured in coronagraphic images. The method involves measuring the standoff distance, the radius of curvature of the flux rope, and assuming the value of the adiabatic index and deriving the Alfvenic Mach number. The next step is to derive the Alfvenic Mach number from the measured shock speed and an estimate of the local solar wind speed. The final step involves deriving the magnetic field from the Alfven speed by measuring the local plasma density either from coronagraphic (polarized brightness) images or from the band-splitting of type II radio bursts. In this paper, we derive the combined magnetic field profile from near the Sun to the edge of the LASCO field of view (1.5 to 30 solar radii) and compare it with the current model profiles.