Search NASA⌕ Search

SEARCH · Search NASA

Results for “polyethylene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A general strategy and a consolidated mechanism for low-methane hydrogenolysis of polyethylene over ruthenium

Polyethylene (PE) is one of the most environment-threatening plastic waste. Its Ru-catalyzed hydrogenolysis is rapid but produces too much methane. Here, in this study, low-density PE hydrogenolysis is performed at mild conditions and short times over Ru-doped zirconia catalysts (Ru-XZr, X = Ti, Nb, Ce, W, V, Mo, Fe) to determine low-methane catalysts. Methane is produced via direct terminal C-C scission and surface cascade of consecutive C-C scissions, with the latter sensitive to hydrogen availability and dominant in hydrogen-lean conditions. Reactivity studies, characterization and theory reveal that the most effective dopant oxides (W, V, and Mo) are intermediately reducible, as they store and supply extra hydrogen to Ru via reverse hydrogen spillover. This hydrogen readily hydrogenates and desorbs long alkyl surface intermediates that would otherwise produce cascade methane. Our proposed mechanism reconciles the low methane production achieved by increasing the hydrogen pressure or reducing the particle size and exposes the key selectivity descriptors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The role of catalyst acidity and microstructure on light olefin selectivity in polyethylene deconstruction in short contact time pulse Joule-heated reactors

The growing volume of plastics waste, compounded with a low recycling rate, has led to an alarming amount of plastics ending up in landfills or being incinerated. While pyrolysis offers a route for plastic waste deconstruction, its product distribution is often broad and poorly controlled due to unselective radical chemistry at high temperatures. We recently demonstrated that rapid pulse Joule-heated catalytic cracking over HZSM-5, combined with small fractions of steam, can achieve high selectivity (>80 %) toward C 2 -C 4 olefins, while significantly reducing coking compared to continuous Joule heating. Here, we investigate how acid catalyst properties, such as silica/alumina ratio, zeolite topology, and catalyst porosity, influence light olefin selectivity during polyethylene deconstruction via rapid pulse Joule heating. We demonstrate that silica-to-alumina ratios of ∼30 yield high light olefin selectivity, and small-pore zeolites favor light olefins at the expense of increased coke formation. To mitigate coking, we synthesize HZSM-5 nanosheets and hierarchical zeolites (MFI, FAU, and CHA). Furthermore, these catalysts achieve an ethylene selectivity of approximately 35 %, a twofold increase over prior catalytic pyrolysis. Additionally, co-feeding steam and incorporating hierarchical porosity reduce coke formation and enhance catalyst stability.

Catalytic cracking↗
DOE OSTI2025

A high throughput assay to detect enzymatic polyethylene oxidation

Biological plastics deconstruction and upcycling have emerged as sustainable alternatives to traditional recycling technologies for plastics waste. The discovery and engineering of efficient thermostable poly(ethylene terephthalate) (PET) hydrolases have made biological PET recycling possible at scale; however, enzymes for non-PET plastics, which account for approximately 70% of all plastics produced, remain largely undiscovered. To accelerate the discovery of such enzymes, we develop a high-throughput screen to detect initial polymer oxidation, specifically that of the C-H bond to an aldehyde. We test 4-hydrazino-7-nitro-2,1,3-benxoxadiozole hydrazine (NBD-H), which reacts with generated aldehydes to form a fluorescent hydrazone on plasma oxidized low-density polyethylene (LDPE) films. Hydrazone generation correlated well with the area of aldehyde peaks as measured by Fourier Transform Infrared Spectroscopy (FTIR) (R2 = 0.92). Moreover, we demonstrate that the probe reliably identifies LDPE-active dye decolorizing peroxidases (DyPs) that generate aldehydes on LDPE films (1.7 – 3.0 fold change relative to background), serving as an effective screen as demonstrated by receiver operating characteristic area under the curve of 0.95. Furthermore, this assay offers an LDPE oxidation screening platform that can be readily parallelized and automated for accelerated discovery of enzymes involved in polyolefin deconstruction.

biocatalysis↗
DOE OSTI2022

Polyethylene upcycling to fuels: Narrowing the carbon number distribution in n-alkanes by tandem hydropyrolysis/hydrocracking

The extensive use of plastics in modern life has resulted in a global waste crisis to the environment. Polyethylene (PE) is one of the most popular and hardest plastics to recycle because of its strong C(sp 3 )-C(sp 3 ) bonds. In this study, a tandem conversion process, i.e., hydropyrolysis and subsequent vapor-phase hydrocracking of primary intermediates (C n>5 alkenes and long-chain alkanes), was conducted via a two-step pressurized flow-through fixed-bed reactor over a CoAl 2 O 4 spinel-derived catalyst. The product distribution could be flexibly tuned by regulating operating parameters in the cascade fixed-bed reactor and Co/Al molar ratio in CoAl 2 O 4 spinel catalysts. Under optimal reaction conditions (0.2 MPa H 2 , 550 °C for hydropyrolysis in the 1st reactor, 300–325 °C for hydrocracking in the 2nd reactor, 20 s -1 of gas hourly space velocity), the maximum single-pass yields of gasoline (C 5 -C 12 ) and jet-fuel (C 8 -C 16 ) range n-alkanes reached 86.0 wt% and 68.1 wt%, respectively. The CoAl 2 O 4 spinel catalysts also gained high activity in degrading realistic post-consumer plastics such as linear low-, low-, and high-density PE, and a ~ 73.1 wt% gasoline yield and a ~ 54.7 wt% C 8 -C 16 yield were retained even after 3 cycles in-situ regeneration of deactivated CoAl 2 O 4 catalysts. This work provides an efficient and tunable approach to upcycle PE wastes into liquid fuels with an ideal carbon length.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Reduced-order condensed-phase kinetic models for polyethylene, polypropylene and polystyrene thermochemical recycling

Thermochemical recycling of plastic waste (PW) into chemicals and energy vectors requires coupling particle and reactor-scale simulations to accurate condensed phase pyrolysis mechanisms for each constituent. This work proposes a methodology to derive reduced-order condensed-phase kinetic models from validated semi-detailed kinetic mechanisms. Two types of kinetic models are obtained for polyethylene (PE), polypropylene (PP) and polystyrene (PS): reduced semi-detailed models and multi-step fully lumped ones. These families offer different compromises between accuracy and computational cost. The former employ 50–100 gas + liquid species and describe both the radical degradation and the detailed carbon distribution of the products. Conversely, the latter involves 5–10 species per polymer tracking only the main petroleum cuts. The kinetic mechanisms are complemented by the definition of thermochemical properties of gas, liquid, and solid-phase species, accounting for phase-transitions through pseudo-chemical reactions. Model validations are performed by comparison with experimental data and the original semi-detailed mechanisms in terms of mass loss, heat fluxes and product distribution profiles. The resulting CHEMKIN-like condensed-phase models are attached as Supplementary Material and as a GitHub repository. Extending the proposed approach to other polymers and coupling it with existing subsets in the CRECK kinetic framework (e.g., biomass, PVC, PET) offers a powerful tool to model thermochemical recycling of PW and biomass/PW mixtures.

kinetics↗
DOE OSTI2025

Hydrogen from low-density polyethylene via nonthermal plasma: Effects of energy density and process parameters

Nonthermal plasma processes are promising for the modular valorization of plastic waste, especially into hydrogen and carbon materials, due to their high intensity, lack of reliance on catalysts or consumables, and suitability to be directly powered by electricity. We investigate the production of hydrogen from low-density polyethylene (LDPE) as a plastic waste model using streamer Dielectric Barrier Discharge (sDBD) plasma in nitrogen at atmospheric pressure. Here, we examine the effects of process energy density (energy input per unit of feedstock mass), feedstock mass, and plasma intensity (electric voltage) on plasma properties, hydrogen yield and energy efficiency via gas chromatography, optical emission spectroscopy, and electrical diagnostics, together with reactor-scale and nonlinear electric circuit modeling. The characteristic temperature of free electrons in the sDBD plasma is approximately 15000 K (1.3 eV), and that of gas species 10 times lower, demonstrating strong thermal non-equilibrium that can lead to molecular bond scission via charged species impact rather than direct heating. Experimental results show that higher energy density leads to greater hydrogen production and diminishing energy efficiency, and that higher plasma intensity and larger feedstock mass lead to greater hydrogen yield due to higher plasma temperatures and enhanced energy fluxes to the feedstock.

08 HYDROGEN↗
DOE OSTI2023

Effect of secondary gas-phase reactions (SGR) in pyrolysis of carbon feedstocks for anisotropic carbon materials production – 3: Modifying non-coking coal tar through co-pyrolysis of coal with linear low-density polyethylene and high-impact polystyrene

Herein, this work focuses on co-pyrolysis experiments of Utah Sufco coal with linear low-density polyethylene (LLDPE) and high-impact polystyrene (HIPS). These two plastic types have differing pyrolysis chemistries and have different hydrogen transfer behavior. Similar to earlier work in this series of papers, controlled secondary gas-phase reactions during pyrolysis were used to induce cracking and condensation reactions among the pyrolytic tar species. Co-pyrolysis tests were performed with feed plastic percentages ranging from 10-20 wt% and pyrolysis SGR temperatures ranging from 800-900°C. Analyses of the intermediate tar products showed that oxygen contents and aromaticity were substantially different, depending on the plastic, and resulting pitch softening points and mesophase contents also varied greatly depending on the starting plastic feedstock used. Most of the synergies observed in the co-pyrolysis results were negative, except for the oxygen content. Oxygen contents were higher than expected when LLDPE was used, resulting in reactive pitches with softening points > 350°C. On the other hand, oxygen contents were lower than expected when HIPS was used, resulting in less reactive pitches. Ultimately, only the HIPS/coal samples created at the SGR temperature of 900°C had reasonable softening points at or under 350°C, making them the only samples created in this work potentially suitable for mesophase pitch-based carbon fiber production. The success in creating fusible mesophase pitches from co-pyrolyzing HIPS with Utah Sufco coal is likely attributed to the fact that polystyrene is a stronger hydrogen acceptor rather than donor, which should facilitate more cracking rather than stabilizing tar oxygen functional groups, making the tar species ultimately less reactive during thermal conversion to mesophase pitch.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Recycled polyethylene and crumb rubber composites modified asphalt with improved aging resistance and thermal stability

Crumb rubbers (CR) and recycled Polyethylene (PE) are commonly used as modifiers to improve the asphalt properties. However, the addition of these modifiers individually may result in phase separation of PE and inadequate degradation of CR, which may not simultaneously satisfy the rheological and aging resistance of the binder blends. In this study, a type of CR/PE composites manufactured through melt extrusion procedures was adopted for the improvement of the modified binder blends. The modified binder blends after short-term (RTFO) and long-term (PAV) aging were collected for dynamic shear rheometer and bending beam rheometer tests. FTIR tests were also used to quantify the aging resistance, while differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were applied to evaluate the thermal behaviors of the binder blends. Optical microscopy tests were used to explore the modification mechanism and visualize the microstructures of original and PAV aged binder blends. Test results showed that CR/PE composites could significantly improve the aging resistance of the binder blends. The dispersed PE particles still interacted with each other and meanwhile worked with the diffused rubbery phase, which could form a similar TPEs network. The oxidation and high-temperature aging of such binder blends would strengthen the network that resisted the aging severity of the binder blends. Furthermore, it was also revealed that CR/PE modified asphalt could sustain more heat before a rapid degradation and the well-dispersed PE particles could interact with the diffused CR particles to form a network to resist aging.

02 PETROLEUM↗
DOE OSTI2021

Heterogeneous Diels–Alder tandem catalysis for converting cellulose and polyethylene into BTX

Producing biomass-derived aromatic hydrocarbons via controllable Diels–Alder reactions is a promising approach to recover energy and chemicals from waste streams. A tandem Diels–Alder catalysis consisting of SAPO-34 and Fe/HZSM-5 (stacked catalysis or mixed catalysis) was evaluated for thermochemical conversion of cellulose and polyethylene blends into benzene, toluene, and xylenes (BTX). Aromatization catalyst type significantly affected the activity of tandem catalysis, and the BTX obtained from the HZSM-5 stacked catalysis was ~2.3 times higher than that of the USY stacked one. An introduction of Fe active promoters into HZSM-5 increased the Lewis to Brønsted acid sites molar ratio (L/B) from 0.4 to 4.1. The comparison between Fe/HZSM-5 stacked catalysis and parent HZSM-5 single catalysis indicated that the former was more effective for BTX production, obtaining a nearly two-fold increase in yield with a high selectivity of 82.8%. A close proximity between Fe/HZSM-5 and SAPO-34 in the mixed catalysis increased the BTX enhancement to 1.8. A synergistic effect was provided by the coordination of Lewis and Brønsted acid sites in the Fe/HZSM-5 mixed catalysts for facilitating BTX generation, achieving a maximum of 25.9% at a Fe/HZSM-5 to SAPO-34 mass ratio of 1:1 with a theoretical L/B of 7.2. Finally, this work provides a sustainable strategy to produce biomass-derived aromatic hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Techno-economic analysis and life cycle assessment for the catalytic hydrogenolysis and hydrocracking of polyethylene

Catalytic hydrogenolysis and hydrocracking are promising technologies for the conversion of polyolefin waste into hydrocarbons. Here, to explore the economic and environmental viability of these approaches, we conducted techno-economic analysis and life cycle assessment of polyethylene hydrogenolysis and hydrocracking processes that produce fuel-range products or olefins, respectively. Relative to primary production, the minimum selling price (MSP) of alkanes for linear-chain naphtha was estimated to be 1.8-fold higher, whereas branched-chain naphtha and propylene were shown to be cost competitive. Environmental impacts showed similar trends across scenarios, with propylene production by hydrocracking exhibiting greenhouse gas emissions comparable with conventional propylene due to relatively low hydrogen demand and high yield. Together, these results suggest that innovations in catalysis and reaction engineering will be required to make viable products that are scale matched with today's plastics, such as light olefins for closed-loop recycling.

09 BIOMASS FUELS↗
DOE OSTI2020

Structural and antibacterial properties of NSAID-loaded ultra-high molecular weight polyethylene

Peri-articular delivery of pain medication in joint arthroplasty has the potential to address post-operative pain and decrease the use of systemic opioids. Additionally, the sustained release from a delivery vehicle may be especially impactful in the initial post-operative period when pain is most severe. We recently described a novel approach for the sustained intra-articular delivery of an analgesic (bupivacaine) from an ultra-high molecular weight polyethylene (UHMWPE) bearing surface. A secondary but very significant effect of incorporating bupivacaine in UHMWPE was its antibacterial effect against Staphylococcal species, which are associated with the majority of periprosthetic joint infections. Here, we report on the structure, properties, elution characteristics and antibacterial properties of UHMWPE loaded with the non-steroidal anti-inflammatory drug (NSAID) — tolfenamic acid. We showed that 6 wt% drug loading was optimal for eluting clinically relevant intra-articular and systemic concentrations, for maintaining mechanical properties at a clinically relevant level, and for providing anti-colonization potential against low risk (planktonic) and high risk (biofilm forming) Staphylococcal species. We determined the osteoblast response to the tolfenamic acid-loaded UHMWPE to evaluate the cytotoxicity profile of this novel material. Tolfenamic acid-loaded UHMWPE has the potential to be used as a part of multimodal pain management therapy following arthroplasty and may provide prophylaxis for periprosthetic infection.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Aging mechanisms of filled cross-linked polyethylene (XLPE) cable insulation material exposed to simultaneous thermal and gamma radiation

Thermal and simultaneous thermal and gamma radiation aging experiments were conducted on an industry grade cross-linked polyethylene (XLPE) cable insulation material, which is a composite material with XLPE as polymer matrix and various additives and fillers. Reverse engineering was conducted to identify and quantify the material composition given that this information was not revealed by the cable manufacture. Samples were then aged at temperatures of 60, 90, and 115 °C, exposed to gamma radiation for total doses of 0 to 324 kGy, and at dose rates of 0 to 540 Gy/h. Aging mechanisms were studied using various materials characterization techniques including pyrolysis gas chromatography mass spectrometry (Py-GCMS), differential scanning calorimetry (DSC), nuclear magnetic resonance spectroscopy (NMR), and gel-fraction tests. Results show that the flame-retardant components were decomposed into smaller molecules when the material was exposed to gamma radiation, while no changes were observed when the samples were aged thermally without gamma radiation. With exposure to gamma radiation, the crystalline phase of the XLPE were damaged by gamma radiation introducing defects in the crystals, resulting in smaller and less perfect crystals. The dominance of chain scission or chain reformation process largely depends on the chain mobility, which is decided by the aging temperature. Chain scission was seen to dominate when the material was exposed to gamma radiation at 60 °C. Chain cross-linking slightly dominated when the material was exposed to gamma radiation at 90 °C and became more dominant with exposure to gamma radiation at 115 °C. No significant change to the XLPE polymer matrix was observed when the samples were exposed to thermal aging without gamma radiation. Finally, antioxidant is more effective in protecting the XLPE polymer matrix under thermal aging, but less effective with sample exposure to gamma radiation.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Direct comparison of gamma, electron beam and X-ray irradiation doses on characteristics of low-density polyethylene, polypropylene homopolymer, polyolefin elastomer and chlorobutyl rubber medical device polymers

There is a growing need for increased efficiency in the sterilization of single use medical devices and other products that contain polymer components. Gamma radiation is widely used for devices suited for radiation sterilization; however, safety, throughput and cobalt-60 source availability are challenging the prospect of relying on gamma radiation to meet the anticipated needs of the industry. Use of electron beam (e-beam) and X-rays as alternatives to gamma for radiation sterilization have been hampered in part by a concern that these modalities may adversely affect polymer integrity and performance relative to the gamma method, for which the industry has had much more experience. To address this concern, the effects of sterilization-relevant doses of ebeam, X-ray and gamma radiation were directly compared using common medical device polymers found in two prototypical commercial devices currently sterilized using cobalt-60 gamma irradiation. The Becton, Dickinson and Company (BD) Vacutainer™ Plus tube contains low-density polyethylene and chlorobutyl rubber components, while the BD Vacutainer™ Push Button Blood Collection Set contains polypropylene homopolymer and polyolefin elastomer components. Injection-molded samples prepared from the polymers used in these products were exposed to target doses of 15, 35, 50 and 80 kGy using gamma, e-beam and X-ray radiation. Changes in coloration, tensile properties and hardness were measured for each condition, and the effects of e-beam and X-ray irradiation compared with the effects of gamma irradiation on these properties. Both e-beam and X-ray appear as viable alternatives to gamma irradiation for sterilization of the polymers tested.

sterilization, gamma, X-ray, electron beam, radiat↗
DOE OSTI2022

Weather aging effects on modified asphalt with rubber-polyethylene composites

Weather aging may cause more severe degradation on asphalt than thermal-oxidative aging due to the synergistic effect among oxygen, heat, ultraviolet (UV) radiation, and moisture. This study aimed to investigate weather aging effects and anti-aging mechanisms on asphalt modified with rubber-polyethylene (PE) composites. The modified binder blends and asphalt mixtures were subjected to outdoor weather aging. Dynamic shear rheometer (DSR), Fourier transform infrared spectroscopy (FTIR), Gel permeation chromatography (GPC), and optical microscopy tests were adopted to characterize the rheological properties, aging resistance, polymer degradation, and anti-aging mechanisms of modified binder blends, respectively. Mixture performance tests including Asphalt Pavement Analyzer (APA) and Ideal-CT tests were used to evaluate rutting and cracking resistance of asphalt mixtures. Results showed that weather aging can cause more severe aging to asphalt binders than pressure aging vessel (PAV) due to the severe degradation of PE particles. Rubber-PE composites alloyed with an extruder proved to stabilize PE particles in asphalt and significantly improve the aging resistance of modified binder blends. Furthermore, the enhanced aging resistance is attributed to the dispersion of PE particles and carbon black released by soluble rubbers.

Aging resistance↗
DOE OSTI2023

Investigation of pressure-controlled injection molding on the mechanical properties and embodied energy of recycled high-density polyethylene

Manufacturing with secondary feedstock has been identified as an effective strategy to improve plastic circularity. However, product quality inconsistencies arise due to variations in molecular weight, rheology, and mechanical properties. This work evaluates the processing of recycled high-density polyethylene using pressure-controlled injection molding with a focus on processing behavior and energy consumption. Further, the effects of injection velocity, packing pressure, and transfer position are benchmarked against a conventional velocity-controlled process. The experimental results show that the novel process control strategy significantly affects the mechanical properties, in-mold rheology, and energy consumption. Parts fabricated using pressure-controlled injection molding showed higher tensile properties due to increased macromolecular orientation. Additionally, reduced energy was used due to lower melt pressures required to completely replicate the cavity geometry. The results demonstrate the potential of the technology to support increased utilization of secondary feedstock and reduced carbon footprint.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Quantitative analyses of products and rates in polyethylene depolymerization and upcycling

Depolymerization and upcycling are promising approaches to managing plastic waste. However, quantitative measurements of reaction rates and analyses of complex product mixtures arising from depolymerization of polyolefins constitute significant challenges in this emerging field. Here, we detail techniques for recovery and analysis of products arising from batch depolymerization of polyethylene. We also describe quantitative analyses of reaction rates and products selectivity. This protocol can be extended to depolymerization of other plastics and characterization of other product mixtures including long-chain olefins. For complete details on the use and execution of this protocol, please refer to Sun et al.

Lee, Yu-Hsuan↗
DOE OSTI2025

Hybrid biological-chemical strategy for converting polyethylene into a recyclable plastic monomer using engineered Corynebacterium glutamicum

Converting polyethylene (PE) into valuable materials, particularly ones that are better for the environment than the incumbent plastics, not only helps mitigate environmental issues caused by plastic waste but also alleviates the long-standing problem of microbial fermentation competing with food supplies. However, the inherent robustness of PE due to its strong carbon-carbon bonds and high molecular weight necessitates harsh decomposition conditions, resulting in diverse decomposition outcomes that present significant challenges for downstream applications, especially for bioconversion. In this study, we demonstrate a hybrid biological-chemical conversion process for PE, converting its decomposition products, namely short-chain diacids, into a monomer, β-keto-δ-lactone (BKDL), for highly recyclable polydiketoenimine plastics using engineered Corynebacterium glutamicum. Since BKDL synthesis requires a substantial supply of malonyl-CoA, we employed an alternative biosynthesis pathway that leverages C. glutamicum's natural proficiency in amino acid production. We optimized this pathway in vivo by minimizing carbon loss to CO2 and byproducts, improving the transporter system, and maximizing co-factor regeneration. Furthermore, we co-optimized the PE deconstruction process to produce predominantly C4 to C6 diacids and integrated three catabolic pathways into the engineered strain to enhance diacid utilization, maximizing the carbon conversion from PE. Finally, an engineered polyketide synthase was introduced into C. glutamicum to enable BKDL synthesis. This work demonstrates the potential of a chemo-biological hybrid strategy for recycling plastic waste, highlighting its promise in addressing environmental challenges and promoting sustainable materials.

Zhan, Chunjun↗
DOE OSTI2021

Deuterated polyethylene nanowire arrays for high-energy density physics

Abstract The interaction of intense, ultrashort laser pulses with ordered nanostructure arrays offers a path to the efficient creation of ultra-high-energy density (UHED) matter and the generation of high-energy particles with compact lasers. Irradiation of deuterated nanowires arrays results in a near-solid density environment with extremely high temperatures and large electromagnetic fields in which deuterons are accelerated to multi-megaelectronvolt energies, resulting in deuterium–deuterium (D–D) fusion. Here we focus on the method of fabrication and the characteristics of ordered arrays of deuterated polyethylene nanowires. The irradiation of these array targets with femtosecond pulses of relativistic intensity and joule-level energy creates a micro-scale fusion environment that produced $2\times {10}^6$ neutrons per joule, an increase of about 500 times with respect to flat solid CD 2 targets irradiated with the same laser pulses. Irradiation with 8 J laser pulses was measured to generate up to 1.2 × 10 7 D–D fusion neutrons per shot.

Optics↗