Integration of Process Monitoring for Electrochemical Safeguards.
Abstract not provided.
Cipiti, Benjamin B.↗
SEARCH · Search NASA
Results for “process integration”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Pilot-Scale Demonstration of a Fully Integrated Commercial Process for Converting Woody Biomass into Clean Biomass Diesel Fuel
The economic recovery of petroleum, like other fossil fuels, is limited. Although the current price of oil has dramatically dropped due to increased production and new production methods, it is not expected to remain low for an extended period of time as demand increases. While new methods of obtaining these fossil energy reserves are constantly being invented and introduced, the cost of production generally continues to increase. New sources of energy such as fracking and oil shale or oil sands recovery can produce enormous amounts of energy, but at a severe cost. The current estimate on energy return for energy invested for oil shale for instance is just barely over 1, meaning that for every barrel of energy produced by oil shale there was nearly a barrel of energy invested to recover it. Furthermore, these new technologies are often constantly under attack for environmental concerns (especially given the poor ratio of energy conversion), while conventional oil is regarded as dangerous due to lack of domestic supply and susceptibility to foreign intervention that compromises overall national security. Alternatives to a petroleum-based supply of fuel are a potential route to address these issues, although they must also be economically feasible. The fuels industry is forced to consider these issues in addition to federal mandates intended to gradually diversify our fuel sources.
09 BIOMASS FUELS↗
Fed-batch hydrolysate addition and cell separation by settling in high cell density lignocellulosic ethanol fermentations on AFEX™ corn stover in the Rapid Bioconversion with Integrated recycling Technology process
Abstract The Rapid Bioconversion with Integrated recycling Technology (RaBIT) process uses enzyme and yeast recycling to improve cellulosic ethanol production economics. The previous versions of the RaBIT process exhibited decreased xylose consumption using cell recycle for a variety of different micro-organisms. Process changes were tested in an attempt to eliminate the xylose consumption decrease. Three different RaBIT process changes were evaluated in this work including (1) shortening the fermentation time, (2) fed-batch hydrolysate addition, and (3) selective cell recycling using a settling method. Shorting the RaBIT fermentation process to 11 h and introducing fed-batch hydrolysate addition eliminated any xylose consumption decrease over ten fermentation cycles; otherwise, decreased xylose consumption was apparent by the third cell recycle event. However, partial removal of yeast cells during recycle was not economical when compared to recycling all yeast cells.
Sarks, Cory↗
Hybrid Integration of III-V Solar Microcells for High Efficiency Concentrated Photovoltaic Modules
The design, fabrication and performance of InGaAs and InGaP/GaAs microcells are presented. These cells are integrated with a Si wafer providing a path for insertion in hybrid concentrated photovoltaic modules. Comparisons are made between bonded cells and cells fabricated on their native wafer. The bonded cells showed no evidence of degradation in spite of the integration process which involved significant processing including the removal of the III-V substrate. Results from a number of hybrid cell configurations were reported. These cells employed integration techniques including wafer level bonding of processed cells and solder bonding of the cells. Lastly, the cells themselves showed evidence of degradation in spite of the integration process, which involved significant processing including the removal of the III-V substrate.
14 SOLAR ENERGY↗
Cellulosic Biomass Sugars to Advantage Jet Fuel: Catalytic Conversion of Corn Stover to Energy Dense, Low Freeze Point Paraffins and Naphthenes (CRADA CRD-12-462 Final Report)
NREL will provide scientific and engineering support to Virent Energy Systems in three technical areas: Process Development/Biomass Deconstruction; Catalyst Fundamentals; and Technoeconomic Analysis. The overarching objective of this project is to develop the first fully integrated process that can convert a lignocellulosic feedstock (e.g., corn stover) efficiently and cost effectively to a mix of hydrocarbons ideally suited for blending into jet fuel. The proposed project will investigate the integration of Virent Energy System's novel aqueous phase reforming (APR) catalytic conversion technology (BioForming) with deconstruction technologies being investigated by NREL at the 1-500 L scale. Corn stover was chosen as a representative large volume, sustainable feedstock.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Technology Case Study: Economic, Sustainability, and Deployment Considerations for Sustainable Aviation Fuels Produced via Lignocellulosic Sugar Catalysis
This report presents a technology case study reflecting one exemplary representative pathway for the conversion of lignocellulosic sugars to sustainable aviation fuels (SAF) via aqueous phase reforming (APR) catalysis, considered within a broader integrated biorefinery framework based on biochemical processing operations. While far from the only option for converting sugars to SAF, this pathway was selected as a case study here based on its relatively high technology maturity and simplistic processing approach (avoiding complex separations or other equipment scalability challenges), coupled with the potential for high fuel yields and favorable costs/carbon intensities with opportunities for further near-term optimization. The report considers key process integration and engineering design considerations for a modeled hypothetical, nth-plant commercial biorefinery, reflecting a number of processing options and parameters envisioned to be achievable as future goals. Resultant outputs from Aspen Plus process simulations are evaluated through techno-economic and life cycle analyses (TEA and LCA), including implications for marginal cost of CO2 abatement and inclusion of currently-applicable policy incentives. Moving beyond base case configurations, a number of alternative scenarios are also evaluated for their ability to further improve economics, greenhouse gas (GHG) emissions, and marginal cost of abatement, highlighting a path to achieve deep decarbonization goals of more than 70% GHG reduction for SAF (with the potential to reach net-negative carbon intensities in some cases) under reasonable fuel production costs. The report also highlights future opportunities and gaps for further research on this technology pathway.
09 BIOMASS FUELS↗
Payload Operations and Telescience on ISS
The objective of this paper is to provide future International Space Station (ISS) scientists and/or engineers with an overview of the ISS payload operations and integration process. This process begins with the payload being manifested on the ISS and continued through the integration and operations process. Emphasis is placed on the interfaces and tools that the payload will utilize when going through the process. For each of the Data Sets, the Payload Operations and Integration Center (POIC) provides a Data Set Manager to work with the PD's.
Cissom, Rickey D.↗
Development of Probabilistic Structural Analysis Integrated with Manufacturing Processes
An effort has been initiated to integrate manufacturing process simulations with probabilistic structural analyses in order to capture the important impacts of manufacturing uncertainties on component stress levels and life. Two physics-based manufacturing process models (one for powdered metal forging and the other for annular deformation resistance welding) have been linked to the NESSUS structural analysis code. This paper describes the methodology developed to perform this integration including several examples. Although this effort is still underway, particularly for full integration of a probabilistic analysis, the progress to date has been encouraging and a software interface that implements the methodology has been developed. The purpose of this paper is to report this preliminary development.
Pai, Shantaram S.↗
Process and information integration via hypermedia
Success stories for advanced automation prototypes abound in the literature but the deployments of practical large systems are few in number. There are several factors that militate against the maturation of such prototypes into products. Here, the integration of advanced automation software into large systems is discussed. Advanced automation systems tend to be specific applications that need to be integrated and aggregated into larger systems. Systems integration can be achieved by providing expert user-developers with verified tools to efficiently create small systems that interface to large systems through standard interfaces. The use of hypermedia as such a tool in the context of the ground control centers that support Shuttle and space station operations is explored. Hypermedia can be an integrating platform for data, conventional software, and advanced automation software, enabling data integration through the display of diverse types of information and through the creation of associative links between chunks of information. Further, hypermedia enables process integration through graphical invoking of system functions. Through analysis and examples, researchers illustrate how diverse information and processing paradigms can be integrated into a single software platform.
Hammen, David G.↗
Analysis of strategic environmental assessment in Taiwan energy policy and potential for integration with life cycle assessment
Highlights: • An innovative strategic environmental assessment process integrated with life cycle assessment. • A number of shortcomings of the current SEA process were identified. • Proposals were made by which use of LCA could greatly improve SEA. Strategic environmental assessment (SEA) has been implemented in many policies in the European Union since 2001. In Taiwan, SEA has been implemented for 28 cases since 2001, which includes various types of policies. National energy policy is the most challenging type. There are three most important steps in SEA process: alternative planning, scoping, and impact assessment. However, the current limitation of method application affects the effectiveness of SEA. In this case, life cycle assessment (LCA) is integrated with SEA for clarifying the role of LCA in whole SEA process. The method of combining LCA and SEA has been developed and is applied in a case of Taiwan's energy policy. Benefits from LCA in alternative planning, scoping, and impact assessment steps are explored. Finally, suggestions for enhancing LCA's application, for scoping operation, and for the improvement of SEA are proposed.
54 ENVIRONMENTAL SCIENCES↗
Lignin Valorization: Emerging Approaches
Lignin, an aromatic biopolymer found in plant cell walls, is a key component of lignocellulosic biomass and generally utilized for heat and power. However, lignin's chemical composition makes it an attractive source for biological and catalytic conversion to fuels and chemicals. Bringing together experts from biology, catalysis, engineering, analytical chemistry, and techno-economic/life-cycle analysis, Lignin Valorization presents a comprehensive, interdisciplinary picture of how lignocellulosic biorefineries could potentially employ lignin valorization technologies. Chapters will specifically focus on the production of fuels and chemicals from lignin and topics covered include (i) methods for isolating lignin in the context of the lignocellulosic biorefinery, (ii) thermal, chemo-catalytic, and biological methods for lignin depolymerization, (iii) chemo-catalytic and biological methods for upgrading lignin, (iv) characterization of lignin, and (v) techno-economic and life-cycle analysis of integrated processes to utilize lignin in an integrated biorefinery. The book provides the latest breakthroughs and challenges in upgrading lignin to fuels and chemicals for graduate students and researchers in academia, governmental laboratories, and industry interested in biomass conversion.
09 BIOMASS FUELS↗
Low voltage AC electroluminescence in silicon MOS capacitors
Low power silicon based light source and detector are attractive for on-chip photonic circuits given their ease of process integration. However, conventional silicon light emitting diodes emit photons with energies near the band edge where the corresponding silicon photodetectors lack responsivity. On the other hand, previously reported hot carrier electroluminescent silicon devices utilizing a reverse biased diode require high operating voltages. Here, we investigate hot carrier electroluminescence in silicon metal–oxide–semiconductor capacitors operating under transient voltage conditions. Further, during each voltage transient, large energy band bending is created at the edge of the source contact, much larger than what is achievable at a steady state. As a result, electrons and holes are injected efficiently from a single source contact into the silicon channel at the corresponding voltage transient, where they subsequently undergo impact ionization and phonon-assisted interband recombination. Notably, we show low voltage operation down to 2.8 V by using a 20 nm thick high-κ gate dielectric. We show further voltage scaling is possible by reducing the gate dielectric thickness, thus presenting a low voltage platform for silicon optoelectronic integrated circuits.
42 ENGINEERING↗
Carbon Dioxide Utilization Life Cycle Analysis Guidance for the U.S. DOE Office of Fossil Energy and Carbon Management (Version 2.0)
Capturing carbon dioxide (CO 2 ) and placing it in permanent storage in geologic formations is an option for reducing CO 2 emissions, but it may not be a viable one for all CO 2 emitters. For some, the added cost of capture may be too high to implement, or the geology near the source may not be suitable for storage. In these circumstances, other options will be needed. Carbon use and reuse, or CO 2 utilization (CO2U), is an alternative approach that seeks beneficial uses for captured CO 2 , such as using it as a feedstock in the production of fuels, chemicals, and building materials. These uses would give CO 2 value that could be used by suppliers (emitters) to offset capture costs. One of the principal features and challenges associated with CO2U is that the products derived from CO 2 must have lower carbon footprints than their conventional counterparts. Previous assessments of CO2U alternatives have focused on the carbon content of utilization products as an indicator of CO 2 equivalent (CO 2 e) emissions reduction potential. However, embodied emissions are—at best—only weakly correlated with the amount of carbon contained in any physical product. Therefore, the most attractive CO2U options will both displace the carbon in an existing product and improve the overall carbon efficiency of the manufacturing process. Research to overcome barriers will include identifying existing co-feeds and available low-carbon energy sources to enable the conversion of CO 2 to value-added products under favorable processing conditions. New discoveries in the fields of nano- and bio-technology will be applied to efficiently utilize CO 2 in new applications. Development of advanced materials and processes, integrating CO 2 capture with utilization processes (e.g., algae), exploring a diverse slate of products from CO 2 to effectively offset capture costs and developing processes based on waste energy are means to overcome these barriers. The research will lead to the development of advanced catalysts, materials, and equipment that can be used to convert CO 2 into useful products. The result will be multiple flexible and adaptable technology platforms that can be used to produce suites of products spanning multiple utilization pathways.
54 ENVIRONMENTAL SCIENCES↗
The payload connection - Approaches to onboard data processing for scientific systems on the Space Shuttle
The integration of payload instruments into the Command and Data Management Subsystem (CDMS) of the Space Shuttle Spacelab is discussed. Specific emphasis is on the distributed (self-contained processor) vs centralized (Spacelab Computer) approach to science payload utilization of these control and data handling capabilities. An overview of the Spacelab CDMS is first given. A synopsis of the integration process for Spacelab Missions 1, 2, and 3 is discussed. Three different hardware approaches to payload command and data handling are then categorized from which Spacelab implementations to date are derived. The different types of Spacelab Mission 3 payload CDMS hardware and software being used are discussed, including examples of microprocessors and data acquisition systems. Preliminary costs for Spacelab application software vs other flight software approaches are compared. A standard RAU interface that would permit a range of ECOS services to be provided, yet be implemented as a mass-produceable unit for incorporation into payloads, is proposed, in keeping with the trend toward simplifying the integration effort, standardizing CDMS interfaces, and ultimately lowering cost.
Konkel, C. R.↗
A programmable shared-memory system for an array of processing-in-memory devices
Processing in memory (PIM), the concept of integrating processing directly with memory has been attracting a lot of attention, since PIM can assist in overcoming the throughput limitation caused by data movement between CPU and memory. The challenge, however, is that it requires the programmers to have a deep understanding of the PIM architecture to maximize the benefits such as data locality and parallel thread execution on multiple PIM devices. In this study, we present AnalyzeThat, a programmable shared-memory system for parallel data processing with PIM devices. Thematic to AnalyzeThat is a rich PIM-aware data structure (PADS), which is an encapsulation that integrally ties together the data, the analysis tasks and the runtime needed to interface with the PIM device array. The PADS abstraction provides (i) a sophisticated key-value data container that allows programmers to easily store data on multiple PIMs, (ii) a suite of parallel operations with which users can easily implement data analysis applications, and (iii) a runtime, hidden to programmers, which provides the mechanisms needed to overlay both the data and the tasks on the PIM device array in an intelligent fashion, based on PIM-specific information collected from the hardware. We have developed a PIM emulation framework called AnalyzeThat. In conclusion, our experimental evaluation with representative data analytics applications suggests that the proposed system can significantly reduce the PIM programming effort without losing its technology benefits.
97 MATHEMATICS AND COMPUTING↗
AnalyzeThat: A Programmable Shared-Memory System for an Array of Processing-In-Memory Devices
Processing In Memory (PIM), the concept of integrating processing directly with memory, has been attracting a lot of attention since PIM can assist in overcoming the throughput limitation caused by data movement between CPU and memory. The challenge, however, is that it requires the programmers to have a deep understanding of the PIM architecture to maximize the benefits such as data locality and parallel thread execution on multiple PIM devices. In this study, we present AnalyzeThat, a programmable shared-memory system for parallel data processing with PIM devices. Thematic to AnalyzeThat is a rich PIM-Aware Data Structure (PADS), which is an encapsulation that integrally ties together the data, the analysis tasks and the runtime needed to interface with the PIM device array. The PADS abstraction provides (i) a key-value data container that allows programmers to easily store data on multiple PIMs, (ii) a suite of parallel operations with which users can easily implement data analysis applications, and (iii) a runtime, hidden to programmers, which provides the mechanisms needed to overlay both the data and the tasks on the PIM device array in an intelligent fashion, based on PIM-specific information collected from the hardware. We have developed a PIM emulation framework called AnalyzeThat. Our experimental evaluation with representative data analytics applications suggests that the proposed system can significantly reduce the PIM programming effort without losing its technology benefits.
97 MATHEMATICS AND COMPUTING↗
Collision integrals for nonelastic processes in plasma kinetic theory
Collision integrals for nonelastic processes in plasma kinetic theory
Viegas, J. R.↗