Search NASA⌕ Search

SEARCH · Search NASA

Results for “process modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Analysis of Rig Parameter Data Using Drilling Process Modeling Constraints, Volume 4: Utah FORGE Well 78B-32

Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.

15 GEOTHERMAL ENERGY↗

Analysis of Rig Parameter Data Using Drilling Process Modeling Constraints, Volume 3: Utah FORGE Well 56-32

Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.

15 GEOTHERMAL ENERGY↗

Process modeling guides operational variables that affect CO 2 utilization during the accelerated carbonation of concrete

Abstract Accelerated concrete carbonation is an expanding option for decarbonizing construction. Factors such as concrete mixture design and carbonation environment can influence the maximum CO 2 utilization that can be achieved during such a process. A carbonation process designed to utilize a water‐saturated dilute CO 2 source wherein 2 < CO 2 concentration (v/v%) < 16, was modeled in AspenPlus©. A regression model was developed to correlate CO 2 uptake, relative humidity (11%–100%), CO 2 concentration ([CO 2 ] = 2—16 v/v%), and temperature ( T = 11–74°C) conditions within a carbonation reactor. It was determined that [CO 2 ] was the most significant variable as higher concentrations enhanced CO 2 transport through the concrete. The energy use intensity per mass of CO 2 utilized (kWh/kgCO 2 ) was determined across a range of processing conditions. As a function of the operational conditions, accelerated carbonation provides a net CO 2 reduction of up to 28 kgCO 2 /tonne of concrete; a reduction of up to ~45% compared to typical formulations.

Prentice, Dale P.↗

High Temperature Steam Electrolysis Process Model

The code models the operation of a high temperature steam electrolysis (HTSE) plant coupled with a nuclear power plant, and provides calculations of the process energy requirements; water feed stream flow rate requirements; process cooling requirements; process conditions such as temperature, pressure, and flow rate, throughout the process; product purity and flow rate, as well as data that can be used to determine the sizing, performance, and cost specifications of individual equipment components that comprise the system.

Wendt, DanielS (0000000344914296)↗

Analysis of Rig Parameter Data Using Drilling Process Modeling Constraints, Volume 5: Utah FORGE Well 16B(78)-32

Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.

15 GEOTHERMAL ENERGY↗

Conversion of bioprocess ethanol to industrial chemical products - Applications of process models for energy-economic assessments

An assessment approach for accurate evaluation of bioprocesses for large-scale production of industrial chemicals is presented. Detailed energy-economic assessments of a potential esterification process were performed, where ethanol vapor in the presence of water from a bioreactor is catalytically converted to ethyl acetate. Results show that such processes are likely to become more competitive as the cost of substrates decreases relative to petrolium costs. A commercial ASPEN process simulation provided a reasonably consistent comparison with energy economics calculated using JPL developed software. Detailed evaluations of the sensitivity of production cost to material costs and annual production rates are discussed.

Rohatgi, Naresh K.↗

Application of spatial Poisson process models to air mass thunderstorm rainfall

Eight years of summer storm rainfall observations from 93 stations in and around the 154 sq km Walnut Gulch catchment of the Agricultural Research Service, U.S. Department of Agriculture, in Arizona are processed to yield the total station depths of 428 storms. Statistical analysis of these random fields yields the first two moments, the spatial correlation and variance functions, and the spatial distribution of total rainfall for each storm. The absolute and relative worth of three Poisson models are evaluated by comparing their prediction of the spatial distribution of storm rainfall with observations from the second half of the sample. The effect of interstorm parameter variation is examined.

Eagleson, P. S.↗

Analysis of Rig Parameter Data Using Drilling Process Modeling Constraints, Volume 1: Summary of Utah FORGE Wells 16A(78)-32, 56-32, 78B-32 and 16B(78)-32

Drill rig parameter measurements are routinely used during deep well construction to monitor and guide drilling conditions for improved performance and reduced costs. While insightful into the drilling process, these measurements are of reduced value without a standard to aid in data evaluation and decision making. In the main body of this work (Volume 1), a method is demonstrated whereby rock reduction model constraints are used to interpret drilling response parameters; the method could be applied in real-time to improve decision-making in the field and to further discern technology performance during post-drilling evaluations. Drilling parameters are evaluated using laboratory-validated rock reduction models for predicting the phenomenological response of drag bits (Detournay and Defourny, 1992) in computational algorithms. The method presented has applicability to development of advanced analytics on future geothermal wells using real-time electronic data recording for improved performance and reduced drilling costs. A drilling cost model is also used to show the tradeoff between rate of penetration and bit life and the influence on interval drilling costs. Details of the bit specifications and performance are cataloged in an independent volume, documented under separate cover, for each of the four wells, and include Volume 2: Utah FORGE 16A(78)-32; Volume 3: Utah FORGE 56-32; Volume 4: Utah FORGE 78B-32 and Volume 5: Utah FORGE 16B(78)-32.

15 GEOTHERMAL ENERGY↗

Description of the Process Model for the Technoeconomic Evaluation of MEA versus Mixed Amines for Carbon Dioxide Removal from Stack Gas

This model description is supplemental to the Lawrence Livermore National Laboratory (LLNL) report LLNL-TR-642494, Technoeconomic Evaluation of MEA versus Mixed Amines for CO2 Removal at Near- Commercial Scale at Duke Energy Gibson 3 Plant. We describe the assumptions and methodology used in the Laboratory’s simulation of its understanding of Huaneng’s novel amine solvent for CO2 capture with 35% mixed amine. The results of that simulation have been described in LLNL-TR-642494. The simulation was performed using ASPEN 7.0. The composition of the Huaneng’s novel amine solvent was estimated based on information gleaned from Huaneng patents. The chemistry of the process was described using nine equations, representing reactions within the absorber and stripper columns using the ELECTNRTL property method. As a rate-based ASPEN simulation model was not available to Lawrence Livermore at the time of writing, the height of a theoretical plate was estimated using open literature for similar processes. Composition of the flue gas was estimated based on information supplied by Duke Energy for Unit 3 of the Gibson plant. The simulation was scaled at one million short tons of CO2 absorbed per year. To aid stability of the model, convergence of the main solvent recycle loop was implemented manually, as described in the Blocks section below. Automatic convergence of this loop led to instability during the model iterations. Manual convergence of the loop enabled accurate representation and maintenance of model stability.

01 COAL, LIGNITE, AND PEAT↗

Hierarchical Multiscale Process Modeling of A Textile Composite Y-Joint for the Aurora D8 Aircraft

Woven polymer matrix composites (PMCs) are widely used in aerospace applications for their favorable specific properties. However, the behavior of the inter- and intra-tow matrix during manufacturing of woven PMCs is difficult to isolate experimentally due to geometric and processing complexities. Classical closed-form homogenization approaches allow for composite thermos-chemo-mechanical properties to be characterized at any fiber volume fraction. In this work, virtual curing is applied to the inter- and intra-tow matrix materials of a plain weave repeating unit cell (RUC). Thermo-chemo-mechanical property evolution within the tows is calculated using the Concentric Cylinder Model (CCM) and the Rule of Mixtures (ROM). Curing is implemented through user-written subroutines within the commercial finite element method software Abaqus. Virtual curing results are compared with those from a linear-elastic thermal cool down simulation in Abaqus. Results indicate that tow property evolution during curing has a non-negligible effect on the final stress state.

curing↗

Non-uniform active learning for Gaussian process models with applications to trajectory informed aerodynamic databases

The ability to non-uniformly weight the input space is desirable for many applications, and has been explored for space-filling approaches. Increased interests in linking models, such as in a digital twinning framework, increases the need for sampling emulators where they are most likely to be evaluated. In particular, here we apply non-uniform sampling methods for the construction of aerodynamic databases. This paper combines non-uniform weighting with active learning for Gaussian Processes (GPs) to develop a closed-form solution to a non-uniform active learning criterion. We accomplish this by utilizing a kernel density estimator as the weight function. We demonstrate the need and efficacy of this approach with an atmospheric entry example that accounts for both model uncertainty as well as the practical state space of the vehicle, as determined by forward modeling within the active learning loop.

42 ENGINEERING↗

Coupling Remote Sensing With a Process Model for the Simulation of Rangeland Carbon Dynamics

Rangelands provide significant environmental benefits through many ecosystem services, which may include soil organic carbon (SOC) sequestration. However, quantifying SOC stocks and monitoring carbon (C) fluxes in rangelands are challenging due to the considerable spatial and temporal variability tied to rangeland C dynamics as well as limited data availability. We developed the Rangeland Carbon Tracking and Management (RCTM) system to track long-term changes in SOC and ecosystem C fluxes by leveraging remote sensing inputs and environmental variable data sets with algorithms representing terrestrial C-cycle processes. Bayesian calibration was conducted using quality-controlled C flux data sets obtained from 61 Ameriflux and NEON flux tower sites from Western and Midwestern US rangelands to parameterize the model according to dominant vegetation classes (perennial and/or annual grass, grass-shrub mixture, and grass-tree mixture). The resulting RCTM system produced higher model accuracy for estimating annual cumulative gross primary productivity (GPP) (R 2 > 0.6, RMSE <390 g C m -2 ) relative to net ecosystem exchange of CO 2 (NEE) (R 2 > 0.4, RMSE <180 g C m -2 ). Model performance in estimating rangeland C fluxes varied by season and vegetation type. The RCTM captured the spatial variability of SOC stocks with R 2 = 0.6 when validated against SOC measurements across 13 NEON sites. Model simulations indicated slightly enhanced SOC stocks for the flux tower sites during the past decade, which is mainly driven by an increase in precipitation. Future efforts to refine the RCTM system will benefit from long-term network-based monitoring of vegetation biomass, C fluxes, and SOC stocks.

54 ENVIRONMENTAL SCIENCES↗

Manufacturing process modeling for composite materials and structures, Sandia blade reliability collaborative

The increased use and interest in wind energy over the last few years has necessitated an increase in the manufacturing of wind turbine blades. This increase in manufacturing has in many ways out stepped the current understanding of not only the materials used but also the manufacturing methods used to construct composite laminates. The goal of this study is to develop a list of process parameters which influence the quality of composite laminates manufactured using vacuum assisted resin transfer molding and to evaluate how they influence laminate quality. Known to be primary factors for the manufacturing process are resin flow rate and vacuum pressure. An incorrect balance of these parameters will often cause porosity or voids in laminates that ultimately degrade the strength of the composite. Fiber waviness has also been seen as a major contributor to failures in wind turbine blades and is often the effect of mishandling during the lay-up process. Based on laboratory tests conducted, a relationship between these parameters and laminate quality has been established which will be a valuable tool in developing best practices and standard procedures for the manufacture of wind turbine blade composites.

Guest, Daniel A.↗

Evaluating the carbon footprint of the integrated DBD‐plasma bi‐reforming unit via laboratory scale experiments and scaled‐up process modeling

Catalytic dielectric barrier discharge (DBD) plasma reactor experiments were performed in a tubular glass reactor with a 2 mm gap at 550°C to facilitate the reaction kinetics of steam added dry reforming or bireforming. The best specific energy input obtained was 11.2 eV/molecule feed at CO 2 :CH 4 :H 2 O of 4.5:1:4.5 ratio and gas hour space velocity (GHSV) = 432 h −1 . This value was used to design a conceptual process and assess the environmental impact of methane steam reforming-based H 2 production 18.4 kmol/h CO 2 emission processing into H 2 :CO = 2 syngas, with an emphasis on the carbon footprint.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GDSA Framework Development and Process Model Integration FY2022

The Spent Fuel and Waste Science and Technology (SFWST) Campaign of the U.S. Department of Energy (DOE) Office of Nuclear Energy (NE), Office of Spent Fuel & Waste Disposition (SFWD) is conducting research and development (R&D) on geologic disposal of spent nuclear fuel (SNF) and high-level nuclear waste (HLW). A high priority for SFWST disposal R&D is disposal system modeling (Sassani et al. 2021). The SFWST Geologic Disposal Safety Assessment (GDSA) work package is charged with developing a disposal system modeling and analysis capability for evaluating generic disposal system performance for nuclear waste in geologic media. This report describes fiscal year (FY) 2022 advances of the Geologic Disposal Safety Assessment (GDSA) performance assessment (PA) development groups of the SFWST Campaign. The common mission of these groups is to develop a geologic disposal system modeling capability for nuclear waste that can be used to assess probabilistically the performance of generic disposal options and generic sites. The modeling capability under development is called GDSA Framework (pa.sandia.gov). GDSA Framework is a coordinated set of codes and databases designed for probabilistically simulating the release and transport of disposed radionuclides from a repository to the biosphere for post-closure performance assessment. Primary components of GDSA Framework include PFLOTRAN to simulate the major features, events, and processes (FEPs) over time, Dakota to propagate uncertainty and analyze sensitivities, meshing codes to define the domain, and various other software for rendering properties, processing data, and visualizing results.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Isotherm, Kinetic, Process Modeling, and Techno-Economic Analysis of a Diamine-Appended Metal-Organic Framework for CO 2 Capture Using Fixed Bed Contactors

In this report, diamine-appended metal-organic frameworks exhibiting step-shaped CO 2 adsorption are exceptional candidates for energy-efficient carbon capture. However, there are few studies examining their performance in real-world capture scenarios, in part due to the challenge inherent in modeling their CO 2 uptake behavior. Here, we develop a dual-site Sips model to fit experimental CO 2 adsorption data for dmpn-Mg 2 (dobpdc) (dmpn = 2,2-dimethyl-1,3-diaminopropane; dobpdc 4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) and develop a linear driving force model for the adsorption kinetics based on available experimental data. These models are used to develop a dynamic, fixed bed, nonisothermal contactor model using shaped particles of the material, which is validated with experimental breakthrough data. We also examine the effects of the high heat of adsorption of the material on CO 2 uptake performance and find that heat removal is essential to maximize capture performance. We finally investigate "basic"(no bed cooling during adsorption) and "modified"(bed cooling during adsorption) temperature swing adsorption (TSA) processes using dmpn-Mg 2 (dobpdc), and their process economics are compared to a state-of-the-art monoethanolamine (MEA) capture system with and without heat recovery. In the absence of heat recovery, the adsorbent systems are more costly than established technology. However, with 85% heat recovery, both adsorbent-based TSA processes are projected to cost less than the MEA system. This work highlights that thermal management is vital for implementation of dmpn-Mg 2 (dobpdc) as a viable CO 2 capture technology. Investigation of other contactor technologies that can provide unique ways to manage system heat represent promising future areas of study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗