SEARCH · Search NASA

Results for “profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1980

The applicability of the piecewise linear current profile in the baroclinic instability problem

The applicability of the piecewise linear function in place of a similar smoothly-varying current profile is examined in the baroclinic context. Within the framework of small-perturbation linearization, the behavior of the vertical velocity and the horizontal divergence is analyzed at the discontinuity of the current shear. In the conventional geostrophic-type instability regime, the discontinuity in the horizontal divergence at the shear discontinuity is suppressed, and, therefore, the piecewise linear profile leads to a useful approximation to the true solution. In the symmetric-type instability regime, however, due to the magnified discontinuity in the horizontal divergence at the shear discontinuity, the solution thus obtained will show a major distortion, rendering the piecewise linear profile inadequate for modeling the smoothly-varying current profile. Using exemplary current profiles, numerical results are presented to demonstrate the behavior of the horizontal divergence near the discontinuity of current shear.

Hyun, J. M.↗

NASA NTRS1981

A procedure for estimating the information content of SBUV ozone profiles

A description is presented of a new procedure for determining ozone mixing ratios in the upper stratosphere from satellite observations of backscattered ultraviolet (SBUV) radiance. The employed approach is based on a SBUV inversion procedure. The inversion algorithm can best be described as a series of sequentially performed operations, taking into account the determination of a first guess profile, the representation of the ozone profile by a polynomial, the extension of the profile outside the measurement region, error assessment, the optimal ozone profile, and the utilization of iteration. It is found that the described ozone profiling algorithm can be implemented with sufficient computational speed to be used operationally for the inversion of SBUV data.

Cunnold, D. M.↗

NASA NTRS1981

The validation of LIMS ozone profiles using correlative rocket, ECC, and Dobson data sets

The Limb Infrared Monitor of the Stratosphere (LIMS) experiment is a limb scanning infrared sounder designed to measure vertical temperature profiles and the concentrations of key chemical compounds which are important in the stratospheric ozone-nitrogen photochemistry. Preliminary ozone profiles are being intercompared with correlative rocket and balloonsonde ozone data sets as part of the Nimbus 7 LIMS data validation activity. The LIMS ozone retrievals extend from the lower mesosphere to the tropopause (or cloud-top altitudes). In this paper, preliminary statistics of comparisons of ECC (electrochemical concentration cell) ozonesonde and rocket ozone profiles with LIMS ozone profiles are presented. ECC ozonesonde data taken at times of LIMS overpasses are also used to extend the LIMS retrieval down to ground level. Each combined profile is then integrated to obtain total column ozone. These integrated results are compared to Dobson data obtained at approximately the same time and location.

Remsberg, E. E.↗

NASA NTRS1982

A method for estimation of atmospheric water vapor profiles by microwave radiometry

Simultaneous measurements of microwave emission from the earth, in the oxygen band near 60 GHz, and the water vapor line near 183 GHz are conducted to determine the atmospheric temperature as a function of the pressure and the water vapor burden, and a combination of these two profiles yields a profile of water vapor burden versus pressure. Numerical simulations are developed by using temperature and water vapor profiles from subtropical and midlatitude radiosonde stations, and by assuming surface reflectivities typical of either land or ocean. Over a land surface, the residual rms errors in the estimated water vapor burden profile between 300 and 1000 mb are determined to range from 23 to 43% of the a priori standard deviation of water vapor burden for the corresponding climate. The relative humidity profile is also estimated and found to contain rms errors ranging from 4 to 17% of saturation. Over a seawater surface, using three additional channels of 18.5, 22.2, and 31.7 GHz, the corresponding results are found to be 3-46% of the a priori standard deviation for water vapor burden and 4-15% rms error for relative humidity.

Rosenkranz, P. W.↗

NASA NTRS1982

Analysis of the profile characteristics of corn and soybeans using field reflectance data

The typical patterns of spectral development (profiles) for corn and soybeans are presented, based on field-collected reflectance data transformed to correspond to LANDSAT-MSS Tasseled Cap coordinates. Reasonable variations in field conditions and cultural practices are shown to significantly influence profile features. The separability of the two crops is determined to be primarily related to the maximum value of the reflectance equivalent of Greenness, and to the plateau effect seen in corn Greenness profiles. The impact of changes in conditions on separability is described. In addition, association is made between profile features and stages of development for corn and soybeans. Corn is shown to peak at a stage well before tasseling or maximum LAI, while the characteristics of the soybean profile are shown to be unrelated to any particular stage of development.

Crist, E. P.↗

NASA NTRS1982

On the statistical uncertainties associated with line profile fitting

The paper considers the statistical uncertainties in the best-fit parameters associated with the fitting of observational data by model line profiles of specific form. The parameters involved are amplitude, center, and width. A general procedure is described for any profile type of parametric form. The case of Gaussian profiles is treated in detail, and numerical solutions are presented for equally spaced data of equal weight. Approximate analytical solutions are derived that give good general agreement with the numerical solutions over the whole range of interest. Approximate solutions are also obtained for the case of Lorentzian profiles. It is shown that the Lorentzian results can be used in conjunction with the Gaussian results to estimate the corresponding parameter uncertainties in the case of the general Voigt profile.

Landman, D. A.↗

NASA NTRS1984

Profile design for wings and propellers

It has now become customary to develop profiles for wings and propellers for a given employment of the aircraft. This is possible because methods and computers are available to study an entire series of variants in comparatively short time. The basic viewpoints for profile design are presented. It is shown that laminarization has its advantages in almost all cases, including the design of a turbine blade and the design of the profile of an airliner. The requirements which profiles have to satisfy are discussed along with the possibilities for increasing lift on profiles.

Quast, A.↗

NASA NTRS1985

Profiles of temperature and density based on extremes at 5, 10, 20, 30 and 40 km

Information on the vertical distribution of expected extremes of temperature and density are required for the design and operation of systems traversing the atmosphere. Such data are particularly important at altitudes from the surface to approximately 80 km for developing all types of airborne vehicles ranging from helicopters and airplanes to sophisticated aerospace systems. Vertical profiles of temperature and density have been developed based on 1- and 10-percent hot and cold temperatures and 1- and 10- percent high and low densities occurring during the most severe month at the worst locations for which reliable upper-air data are available. The model profiles, from the surface to 80 km, are based on extremes that occur at 5, 10, 20, 30, and 40 km. There are 20 profiles for extreme temperatures (5 levels by 4 percentiles) that include associated densities, and 20 analogous profiles for extreme densities including associated temperatures. Consequently, a set of realistic profiles (rather than envelopes) of temperature and density, associated with extremes at each of 5 specified levels in the troposphere and stratosphere, are now available for altitudes up to 80 km.

Kantor, A. J.↗

NASA NTRS1986

Intercomparisons of high-resolution solar blind Raman lidar atmospheric profiles of water vapor with radiosondes and kytoon

A report is given of measurements of atmospheric profiles of water vapor in the boundary layer by use of solar blind Raman lidar. These measurement episodes, occuring twice a day over a two week period, were accompanied by a dense net of supporting measurements. The support included two radiosonde launches per measurement episodes as well as a kytoon support measurement of water vapor using a wet bulb-dry bulb instrument. The kytoon strategy included ten minute stops at strategic altitudes. Additional kytoon measurements included ozone profiles and nephelometric extinction profiles in the visible. Typically, six or seven 1000 shot lidar profile averages were collected during a measurement episode. Overall performance comparisons are provided and intercomparisons between auxiliary measurement devices are presented. Data on the accuracy of the lidar water vapor profiles are presented.

Petri, K.↗

NASA NTRS1986

The real-time use of wind profilers in nowcasting

The program for Regional Observing and Forecasting Services (PROFS) has been using wind profile data in experimental forecast applications for over two years, mostly in the form of real-time color displays on the PROFS forecast workstation. The most ambitious test of the workstation to date, the 1985 PROFS Real-Time Experiment (RT-85), ran from 15 May to 23 August, 1985. The use of wind profiler products during this and previous experiments is described. Data from the experimental profiler network in Colorado and from the profiler in Oklahoma are in the form of hourly averages. Arriving data frequently contain errors whose origins range from interference by aircraft in the beams to highway truck traffic. Most of the irregularities are apparent through visual inspection of profiler wind observations plotted on a time-height cross section, but this method of quality control is inadequate if the intended uses of the data involve numerical calculations.

Smith, T. L.↗

NASA NTRS1986

The influence of velocity variability on the determination of wind profiles

High sensitivity radars allow the determination of velocity estimates at time resolutions down to one minute or better. Because of the variability introduced to the mean wind due to turbulence and waves, the high resolution profiles may not be too useful for forecasting applications, although they yield the most realistic estimate of the instantaneous wind profile. Profiles of wind speed and direction, vertical velocity and echo power, which were deduced in real-time on 23 August 1981 with the spaced antenna drift mode of the SOUSY-VHF-Radar are shown. Whereas these profiles were measured within 1 minute, the operating routine allowed the selection of variable (longer) measuring periods, and one has to search for the optimum duration of the data averaging period. A high time resolution wind vector diagram is given which gives an idea of the temporal variability. The data were obtained with the spaced antenna technique, which allows a good estimate of the horizontal wind without having to correct for the vertical velocity component. The wind vectors specifically indicate a quasi-periodic variation in direction. This is assumed to be due to gravity waves since the vertical velocity also shows periodical variations with the same period. The consistency of these spaced-antenna VHF radar results along with the radiosonde data convinced researchers that the method is quite suitable for wind profiling applications.

Rottger, J.↗

NASA NTRS1986

The asymmetric profile of the H76 alpha line emission from MWC349

MWC349 is an emission-line star found by Merrill, Humason and Burwell (1932). Braes, Habing and Schoenmaker (1972) discovered that it is a strong radio source. The radio emission originates in a massive ionized wind that is expanding with a velocity of about 50 km s(-1). Its continuum spectrum fits well a nu(0.6) power law from the cm wavelengths to the far-IR. Radio recombination line emission from the envelope of MWC349 was first detected by Altenhoff, Strittmatter and Wendker (1981). We have obtained good signal-to-noise ratio, Very Large Array observations of the H76 alpha radio recombination line from the ionized wind of MWC349. Our data reveal that the profile is markedly asymmetric, with a steep rise on the blue side. This asymmetry could be due to non-LTE effects in the formation and transfer of the line or to intrinsic asymmetries in the envelope. Our analysis suggests that most probably the peculiar profile is caused by a non-LTE enhancement of the line emission from the side of the envelope nearer to the observer. This asymmetry has the opposite sense than that observed in optical and IR recombination lines, where a different effect (absorption of the stellar continuum by the gas in the wind between the star and the observer) is known to be dominant, leading to the classic P Cygni profile. We propose that the profiles of the radio recombination lines from ionized stellar winds will have this characteristic shape, while optical and IR recombination lines are characterized by P Cygni-like profiles. Unfortunately, at present the detection of radio recombination lines from ionized stellar winds is only feasible for MWC349 and a few other objects.

Rodriquez, L. F.↗

NASA NTRS1987

Equatorial ozone profiles from the ground to 52 km during the Southern Hemisphere autumn

The results of an ozone measurement campaign conducted at Natal, Brazil from March 25 to April 15, 1985 are reported. Complete profiles of ozone, pressure, and temperature were obtained from the ground to 52 km, and all of the profiles correspond with site overpasses by ozone instruments on NASA and NOAA satellites. The profiles from this measurement series show reasonable agreement with established satellite climatologies. Stratospheric ozone variability was 2 percent or less during the 3 weeks of the measurement campaign, with stratospheric temperature and pressure variabilities half that amount. Low variability at a single location for this period implies comparable uniformity for ozone profiles over a large area around the measurement site. The auxiliary pressure and temperature profiles presented here allow the use of this data set as a transfer standard between satellite instruments with different fundamental ozone measurements. Finally, the low ozone variability in the stratosphere at Natal during this measurement series should provide an opportunity for high-quality intercomparisons of measured and modeled ozone concentrations in the equatorial stratosphere and lower mesosphere as well as a consistency check among satellite ozone measurements.

Barnes, Robert A.↗

NASA NTRS1988

Nuclear emission-line intensities and profiles in NGC 3783

High-resolution optical spectrophotometry is presented for the nucleus of the Seyfert 1 galaxy NGC 3783. The data suggest that the broadest components of the forbidden lines have blueshifts relative to systemic velocity which are correlated primarily with ionization potential, and FWHMs which are correlated primarily with criticl density. Similar trends also exist in the line components responsible for the larger part of the line emission, but are not as strong as for the broadest line components. Comparison of the profiles of the Balmer lines indicates that the Balmer decrement measured from the H-beta/H-alpha ratio flattens in the line wings. However, the H-gamma and H-delta line profiles are more similar to the H-alpha line profile than to the H-beta line profile, suggesting that the H-beta profile may be anomalous.

Evans, I. N.↗

NASA NTRS1989

Observational results using the microwave temperature profiler during the Airborne Antarctic Ozone Experiment

The Microwave Temperature Profiler (MTP) measures profiles of air temperature versus altitude. The altitude coverage is about 5 km at a flight altitude of 20 km (66,000 feet), and the profiles are obtained every 14 s. The MTP instrument is installed on NASA's ER-2 aircraft, which flew 13 missions over Antarctica during the Airborne Antarctic Ozone Experiment. Altitude temperature profiles were used to derive potential temperature cross sections. These cross sections have been useful in detecting atmospheric waves. Many wave encounters have been identified as 'mountain waves'. The mountain waves are found to extend from the lowest altitudes measured to the highest (about 24 km). The southern part of the Palmer Peninsula was found to be associated with mountain waves more than half the time. Altitude temperature profiles were also used to measure the lapse rate along the flight track. Lapse rate versus latitude plots do not show significant changes at the ozone hole boundary.

Gary, Bruce L.↗

NASA NTRS1989

Low level remote sensing: The Doppler Radar wind profiler

Mesoscale phenomena such as thunderstorm and sea breeze frontal circulations are being investigated using a 50 MHz Doppler wind profiler at the Kennedy Space Center. The profiler installation will begin October 1, 1988 and will be completed by February 17, 1989. The focus of current research and plans for next year include: examination of vertical velocities associated with local thunderstorm activity and sea breeze frontal circulations and compare the vertical velocities to conceptual mesoscale models; implementation of space-time conversion analysis techniques to blend profiler data with National Meteorological Center's model output and other wind data such as jimsphere, windsonde and rawinsonde for mesoscale analysis; development of suggestions for use of wind profiler data in mesoscale analysis and forecasting at Kennedy Space Center; and problems detection in the quality of the profiler data during this research project. Researchers will work closely with MSFC to identify and solve the data quality problems.

Forbes, Gregory S.↗

NASA NTRS1990

Influence of linear profile modification and loading conditions on the dynamic tooth load and stress of high contact ratio gears

A computer simulation for the dynamic response of high-contact-ratio spur gear transmissions is presented. High contact ratio gears have the potential to produce lower dynamic tooth loads and minimum root stress but they can be sensitive to tooth profile errors. The analysis presented examines various profile modifications under realistic loading conditions. The effect of these modifications on the dynamic load (force) between mating gear teeth and the dynamic root stress is presented. Since the contact stress is dependent on the dynamic load, minimizing dynamic loads will also minimize contact stresses. It is shown that the combination of profile modification and the applied load (torque) carried by a gear system has a significant influence on gear dynamics. The ideal modification at one value of applied load will not be the best solution for a different load. High-contact-ratio gears were found to require less modification than standard low-contact-ratio gears. High-contact-ratio gears are more adversely affected by excess modification than by under modification. In addition, the optimal profile modification required to minimize the dynamic load (hence the contact stress) on a gear tooth differs from the optimal modification required to minimize the dynamic root (bending) stress. Computer simulation can help find the design tradeoffs to determine the best profile modification to satisfy the conflicting constraints of minimizing both the load and root stress in gears which must operate over a range of applied loads.

Lee, Chinwai↗

NASA NTRS1989

Electron density profile description in the international reference ionosphere

Problems encountered during efforts to reformulate the IRI description of the electron density profile are examined. Consideration is given to Booker's (1979) proposal that the unique, analytic profile functions should cover the entire ionospheric height range. The IRI topside model is reviewed and the electron density profile of the middle and lower ionosphere are discussed. Rawer's (1983) procedure for combining the topside, middle, and lower ionospheric profiles into one analytic profile is reviewed.

Rawer, K.↗