Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum gates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Fast superconducting qubit control with subharmonic drives

Increasing the fidelity of single-qubit gates requires a combination of faster pulses and increased qubit coherence. However, these requirements can be contradictory. Additionally, increasing the drive power can heat the qubit’s environment and degrade coherence. In this work, we circumvent this issue and achieve rapid gates by pumping a transmon’s native Kerr at approximately one third of the qubit’s resonant frequency. The subharmonic Rabi rate of the process is proportional to applied drive amplitude cubed, allowing for rapid gates. In addition, we demonstrate that filtering can be used to protect the qubit’s coherence while performing rapid gates. Single qubit gates as short as 37.4 ns are demonstrated with fidelity of 99.91%. We present theoretical calculations indicating that drive induced multi-photon decay will not limit qubit lifetime; calculated power absorption also indicates that this technique could reduce cryostat heating for fast gates, a vital requirement for large-scale quantum computers.

Xia, Mingkang [Univ. of Pittsburgh, PA (United Sta↗
DOE OSTI2026

Interlayer Exciton Condensates between Second Landau Level Orbitals in Double Bilayer Graphene

Here, we present Coulomb-drag measurements on a heterostructure comprising two Bernal-stacked bilayer graphene (BLG) sheets separated by a 2.5 nm hexagonal boron nitride (hBN) spacer in the quantum Hall (QH) regime. Using top and bottom gate control, together with an interlayer bias, we independently tune the two BLG layers into either the lowest (N = 0) or second (N = 1) Landau level (LL) orbital and probe their interlayer QH states. When both layers occupy the N = 0 orbital, we observe both interlayer exciton condensates (ECs) at integer total filling and interlayer fractional QH states, echoing the results in double monolayer graphene. In contrast to previous studies, however, when both BLG layers occupy the N = 1 orbital, we also observe quantized drag signals, signifying an interlayer exciton condensate formed between the second LLs. By tuning the layer degree of freedom, we find that this N = 1 EC state arises only when the N = 1 wave function in each BLG is polarized toward the hBN interface to maximize the interlayer Coulomb interaction.

Electrical conductivity↗
DOE OSTI2025

Intermediate-temperature topological Uhlmann phase on IBM quantum computers

A spin-1 system can exhibit an intermediate-temperature topological regime with a quantized Uhlmann phase sandwiched by topologically trivial low- and high-temperature regimes. We present a quantum circuit consisting of system and ancilla qubits plus a probe qubit which prepares an initial state corresponding to the purified state of a spin-1 system at finite temperature, evolves the system according to the Uhlmann process, and measures the Uhlmann phase via expectation values of the probe qubit. Although classical simulations suggest the quantized Uhlmann phase is observable on International Business Machines (IBM’s) noisy intermediate-scale quantum (NISQ) computers, an implementation of the circuit without any optimization exceeds the gate count for the error budget and results in unresolved signals. Through a series of optimization with Qiskit and BQSKit, the gate count can be substantially reduced, making the jumps of the Uhlmann phase more visible. A recent hardware upgrade of IBM quantum computers further improves the signals and leads to a clearer demonstration of interesting finite-temperature topological phenomena on NISQ hardware.

Mastandrea, Christopher [Univ. of California, Merc↗
DOE OSTI2026

Demonstration of Cross-Resonance Gates with Resonator-Assisted ZZ Cancellation

We present the characterization of a CNOT gate realized by combining cross-resonance interaction with resonator-assisted ZZ cancellation in fixed-frequency transmons on a Rigetti–SQMS co-developed quantum processor. Extending earlier work on dynamical ZZ cancellation via off-resonant resonator drives [1], we demonstrate a direct CNOT gate implementation achieved through two microwave drives on the transmons that generate a CX rotation in the |10⟩−|11⟩ subspace while selectively darkening the |00⟩−|01⟩ transition. This tunable-coupler-free approach enables high-fidelity gates and enhances the scalability of superconducting quantum architectures. [1] Z. Huang et al., Phys. Rev. Applied 22, 034007 (2024)

Heidler, Paul [Fermilab]↗
DOE OSTI2024

Visual Analytics of Performance of Quantum Computing Systems and Circuit Optimization

Driven by potential exponential speedups in business, security, and scientific scenarios, interest in quantum computing is surging. This interest feeds the development of quantum computing hardware, but several challenges arise in optimizing application performance for hardware metrics (e.g., qubit coherence and gate fidelity). In this work, we describe a visual analytics approach for analyzing the performance properties of quantum devices and quantum circuit optimization. Our approach allows users to explore spatial and temporal patterns in quantum device performance data and it computes similarities and variances in key performance metrics. Detailed analysis of the error properties characterizing individual qubits is also supported. We also describe a method for visualizing the optimization of quantum circuits. The resulting visualization tool allows researchers to design more efficient quantum algorithms and applications by increasing the interpretability of quantum computations.

Chae, Junghoon↗
DOE OSTI2025

Machine learning for arbitrary single-qubit rotations on an embedded device

Here, in this study, we present a technique for using machine learning (ML) for single-qubit gate synthesis on field-programmable logic for a superconducting transmon-based quantum computer based on simulated studies. Our approach is multi-stage. We first “bootstrap” a model based on simulation with access to the full state vector for measuring gate fidelity. We next present an algorithm, named adapted randomized benchmarking (ARB), for fine-tuning the gate on hardware based on measurements of the devices. We also present techniques for deploying the model on programmable devices with care to reduce the required resources. While the techniques here are applied to a transmon-based computer, many of them are portable to other architectures.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Cavity electrodynamics of van der Waals heterostructures

Van der Waals heterostructures host many-body quantum phenomena that are tunable in situ using electrostatic gates. Their constituent two-dimensional materials and gates can naturally form plasmonic self-cavities, confining light in standing waves of current density due to finite-size effects. The plasmonic resonances of typical graphite gates fall in the gigahertz to terahertz range, corresponding to the same microelectronvolt to millielectronvolt energy scale as the phenomena in van der Waals heterostructures that they electrically control. This raises the possibility that the built-in cavity modes of graphite gates are relevant for shaping the low-energy physics of these heterostructures. However, probing these cavity-coupled electrodynamics is challenging as devices are notably smaller than the diffraction limit at the relevant wavelengths. Here we report on the intrinsic cavity conductivity of gate-tunable graphene heterostructures. As the carrier density is tuned, we observe coupling and spectral weight transfer between graphene and graphite plasmonic cavity modes in the ultrastrong coupling regime. We present an analytical model to describe the results and provide general principles for cavity design. Our findings show that intrinsic cavity effects are important for understanding the low-energy electrodynamics of van der Waals heterostructures and open a pathway for useful functionality through cavity control.

Electronic properties and materials↗
DOE OSTI2024

Enhancing scalability and accuracy of quantum poisson solver

The Poisson equation has many applications across the broad areas of science and engineering. Most quantum algorithms for the Poisson solver presented so far either suffer from lack of accuracy and/or are limited to very small sizes of the problem and thus have no practical usage. In this regard, our previous work showed a proof-of-concept demonstration in advancing quantum Poisson solver algorithm and validated preliminary results for a simple case of 3 x 3 problem. In this work, we delve into comprehensive research details, presenting the results on up to 15 x 15 problems that include step-by-step improvements in Poisson equation solutions, scaling performance, and experimental exploration. In particular, we demonstrate the implementation of eigenvalue amplification by a factor of up to 2 8 , achieving a significant improvement in the accuracy of our quantum Poisson solver and comparing that to the exact solution. Additionally, we present success probability results, highlighting the reliability of our quantum Poisson solver. Moreover, we explore the scaling performance of our algorithm against the circuit depth and width, demonstrating how our approach scales with larger problem sizes and thus further solidifies the practicality of easy adaptation of this algorithm in real-world applications. We also discuss a multilevel strategy for how this algorithm might be further improved to explore much larger problems with greater performance. Finally, through our experiments on the IBM quantum hardware, we conclude that though overall results on the existing NISQ hardware are dominated by the error in the CNOT gates, this work opens a path to realizing a multidimensional Poisson solver on near-term quantum hardware.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1987

Pseudomorphic InGaAs/AlGaAs modulation-doped FET's with reduced low-frequency noise and thermally stable performance

A high-performance MODFET structure grown by MBE with the incorporation of a single quantum well In(0.15)Ga(0.85)As layer for the transport of two-dimensional electron gas has been critically examined for its thermal stability at 80 K and low-frequency noise form 0.01 to 10 to the 8th Hz. Experimental results indicate that the behavior of this device in both these respects is much superior when compared with the same behavior of conventional MODFETs. A maximum low-field carrier mobility of 29,000 sq cm/s at 80 K and an average carrier saturation velocity of 2 x 10 to the 7th cm/s at 300 K in a 1-micron gate device clearly indicate that the quality of the pseudomorphic quantum well (InGaAs) layer is either comparable or better than that of the usual GaAs buffer layer. The deep level spectra, obtained through photo-FET measurements, and the low-frequency noise spectra at different temperatures obtained for the new pseudomorphic and conventional MODFET's have clearly indicated that contributions from various deep levels present in the new structure are significantly reduced.

Liu, Shih-Ming↗
DOE OSTI2025

An integrated photonic engine for programmable atomic control

Abstract Solutions for scalable, high-performance optical control are important for the development of scaled atom-based quantum technologies. Modulation of many individual optical beams is central to applying arbitrary gate and control sequences on arrays of atoms or atom-like systems. At telecom wavelengths, miniaturization of optical components via photonic integration has pushed the scale and performance of classical and quantum optics far beyond the limitations of bulk devices. However, material platforms for high-speed telecom integrated photonics lack transparency at the short wavelengths required by leading atomic systems. Here, we propose and implement a scalable and reconfigurable photonic control architecture using integrated, visible-light modulators based on thin-film lithium niobate. We combine this system with techniques in free-space optics and holography to demonstrate multi-channel, gigahertz-rate visible beamshaping. When applied to silicon-vacancy artificial atoms, our system enables the spatial and spectral addressing of a dynamically-selectable set of these stochastically-positioned point emitters.

Science & Technology - Other Topics↗
DOE OSTI2025

Systematic many-fermion Hamiltonian input scheme and spectral calculations on quantum computers

We present a novel input scheme for general second-quantized Hamiltonians of relativistic or non-relativistic many-fermion systems. This input scheme incorporates the fermionic anticommutation relations, particle number variations, and respects the symmetries of the Hamiltonian. Based on our input scheme, we propose a hybrid quantum-classical framework for spectral calculations on future quantum hardwares. We provide explicit circuit designs and the associated gate cost. We demonstrate our hybrid framework by solving the low-lying spectra of 42 Ca and 46 Ca. Our input scheme provides new pathways to solving the spectra and dynamics of the relativistic and nonrelativistic many-fermion systems via first-principles approaches.

Hybrid spectral calculation framework↗
NASA NTRSDate not supplied

Dynamical Decoupling for Measuring and Suppressing Crosstalk

Dynamical decoupling (DD) is a noise-mitigating strategy in which sequences of pulses are applied to single qubits to average out their interaction with the environment. DD has been extensively studied and demonstrated for suppressing single-qubit decoherence and can be tailored for different noise spectrum. We report another important adaptation of DD where crosstalk between qubits are suppressed. We demonstrate the efficiency of this procedure on quantum circuits on superconducting transmon-based quantum devices. We designed a family of syncopated DD sequences that effectively suppress ZZ coupling between qubit pairs, which is the dominating crosstalk form on the device. We insert DD to a quantum circuit whenever single qubits are idle (often during two-qubits gates on other qubits). While standard periodic DD suppress crosstalk between these qubits and their neighbors, the syncopated DD further decouples crosstalk between these qubits. We further designed short sequences that maximize the application of DD without adding time to the quantum circuit execution. Such DD sequences yield significant improvement of the performance of the algorithm on the hardware. The performance is further boosted by combining DD with another mitigation strategy, randomized compilation. Our work demonstrated that syncopated DD is effective and practical way to suppress crosstalk in quantum circuits and serves as a great probe to characterize the crosstalk and inform hardware design.

Quantum Computing↗
DOE OSTI2025

Toward a 2D Local Implementation of Quantum Low-Density Parity-Check Codes

Geometric locality is an important theoretical and practical factor for quantum low-density parity-check (qLDPC) codes that affects code performance and ease of physical realization. For device architectures restricted to two-dimensional (2D) local gates, naively implementing the high-rate codes suitable for low-overhead fault-tolerant quantum computing incurs prohibitive overhead. In this work, we present an error-correction protocol built on a bilayer architecture that aims to reduce operational overheads when restricted to 2D local gates by measuring some generators less frequently than others. We investigate the family of bivariate-bicycle qLDPC codes and show that they are well suited for a parallel syndrome-measurement scheme using fast routing with local operations and classical communication (LOCC). Through circuit-level simulations, we find that in some parameter regimes, bivariate-bicycle codes implemented with this protocol have logical error rates comparable to the surface code while using fewer physical qubits. Published by the American Physical Society 2025

Berthusen, Noah (ORCID:0000000275862786)↗
DOE OSTI2025

Computational Power of Random Quantum Circuits in Arbitrary Geometries

Empirical evidence for a gap between the computational powers of classical and quantum computers has been provided by experiments that sample the output distributions of two-dimensional quantum circuits. Many attempts to close this gap have utilized classical simulations based on tensor network techniques, and their limitations shed light on the improvements to quantum hardware required to frustrate classical simulability. In particular, quantum computers having in excess of approximately 50 qubits are primarily vulnerable to classical simulation due to restrictions on their gate fidelity and their connectivity, the latter determining how many gates are required (and, therefore, how much infidelity is suffered) in generating highly entangled states. Here, we describe recent hardware upgrades to Quantinuum’s H2 quantum computer, enabling it to operate on up to 56 qubits with arbitrary connectivity and 99.843(5)% two-qubit gate fidelity. We define a class of circuits with random geometries that become hard to classically simulate in very low depth and implement them utilizing the flexible connectivity of H2. A careful analysis demonstrating the fast saturation of classical simulation complexity with depth indicates that H2 can yield data well beyond the reach of state-of-the art classical simulation methods at unprecedented fidelities. We find that the considerable difficulty of classically simulating H2 is likely limited only by qubit number, demonstrating the promise and scalability of the quantum charge-coupled device architecture as continued progress is made toward building larger machines. Published by the American Physical Society 2025

DeCross, M.↗
DOE OSTI2024

A dual-species Rydberg array

Large-scale Rydberg atom arrays are used for highly coherent analogue quantum simulations and for digital quantum computations. However, advanced quantum protocols, such as quantum error correction, require midcircuit qubit operations, including the replenishment, reset and read-out of a subset of qubits. A compelling strategy for unlocking these capabilities is a dual-species architecture in which a second atomic species is controlled independently and entangled with the first through Rydberg interactions. Here, we realize a dual-species Rydberg array consisting of rubidium and caesium atoms and explore regimes of interactions and dynamics not accessible in single-species architectures. We achieve enhanced interspecies interactions by electrically tuning the Rydberg states close to a Förster resonance. In this regime, we demonstrate an interspecies Rydberg blockade and implement a quantum state transfer from one species to another. We then generate a Bell state between Rb and Cs hyperfine qubits through an interspecies controlled-phase gate. Finally, we combine interspecies entanglement with a native midcircuit read-out to achieve quantum non-demolition measurements.

atomic and molecular interactions with photons↗
DOE OSTI2024

Gate-Controlled Anyon Generation and Detection in Kitaev Spin Liquids

Reliable manipulation of non-Abelian Ising anyons supported by Kitaev spin liquids may enable intrinsically fault-tolerant quantum computation. Here, we introduce a standalone scheme for both generating and detecting individual Ising anyons using tunable gate voltages in a heterostructure containing a non-Abelian Kitaev spin liquid and a monolayer semiconductor. In this study, the key ingredients of our setup are a Kondo coupling to stabilize an Ising anyon in the spin liquid around each electron in the semiconductor, and a large charging energy to allow control over the electron numbers in distinct gate-defined regions of the semiconductor. In particular, a single Ising anyon can be generated at a disk-shaped region by gate tuning its electron number to one, while it can be interferometrically detected by measuring the electrical conductance of a ring-shaped region around it whose electron number is allowed to fluctuate between zero and one. We provide concrete experimental guidelines for implementing our proposal in promising candidate materials like α-RuCl 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Unified architecture for quantum lookup tables

Quantum access to arbitrary classical data encoded in unitary black-box oracles underlies interesting data-intensive quantum algorithms, such as machine learning or electronic structure simulation. The feasibility of these applications depends crucially on gate-efficient implementations of these oracles, which are commonly some reversible versions of the Boolean circuit for a classical lookup table. Here, we present a general parametrized architecture for quantum circuits implementing a lookup table that encompasses all prior work in realizing a continuum of optimal trade-offs between qubits, non-Clifford gates, and error resilience, up to logarithmic factors. Our architecture assumes only local 2D connectivity, yet recovers results, with the appropriate parameters, polylogarithmic error scaling. We also identify regimes, such as simultaneous sublinear scaling, in all parameters. These results enable tailoring implementations of the commonly used lookup table primitive to any given quantum device with constrained resources.

quantum circuits↗