Search NASA⌕ Search

SEARCH · Search NASA

Results for “radio frequency communication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

RINGSAT

Radio frequency interference (RFI) presents a serious problem to naval communications. Unauthorized transmissions on the same frequencies that FLTSAT or LEASAT use cause a loss of one or more transponders on a satellite. The problem is not correctable until the emitter is located and turned off, or until it runs off on its own. The present geolocation system cannot deal with the RFI problem adequately. This causes the Navy to lose operational capability and money. The proposed Radio Frequency Interference Navy Geolocation Satellite (RINGSAT) would locate the source of the interference within 3 hours, an outstanding improvement over current equipment. Furthermore, RINGSAT can be built quickly, at minimal cost, and can be used concurrently for other military missions. Currently, geolocation to identify the RFI is done at Naval Space Command. Using single satellite doppler, time delay of arrival, and frequency delay of arrival techniques, it is possible to locate the interfering emitter. However, for the first quarter of fiscal year 1993, about 50 different channels used by the Navy were nonoperational for over 500 hours. Almost 30 percent of the interference occurrences lasted for over 12 hours. In only one quarter of the cases was the interference turned off in less than two_hours either by our detection or on its own.

DOWDY↗
NASA NTRSDate not supplied

Estimation of Timing Performance with Pulsed Laser Links for Small Satellite PNT

Satellite constellations are growing in size and in utility for applications as diverse as providing reliable, low-latency internet service to rural areas orEarth science missions.This expansion of satellite constellations brings attention to the need for responsive and reliable satellite communication.Current research in the PrecisionSpace Systems Laboratory at the University of Florida focuses on using pulsed laser communications as the method of relaying time signals instead of the radio frequency (RF)signals.The upcoming CLICK (CubeSat Laser Infrared CrosslinK) missions (Massachusetts Institute of Technology, University of Florida, NASA Ames Research Center) will demonstrate a spacecraft-to-spacecraft laser communication link and time-transfer.For pre-flight technology assessment of missions such as CLICK, a simulation of a spacecraft constellation in Earth orbit has been created to estimate clock synchronization and precision orbit determination based on measured instrumentation performance.We have developed a novel MATLAB-based numerical simulator to model spacecraft-to-spacecraft laser time-transfer and estimate the offset between the spacecraft clocks over time.This simulation includes timing errors associated with laser pulse generation and detection, as well as non-Gaussian clock drift models.The two on-board clocks modeled are a cesium-based Chip-Scale Atomic Clock (CSAC) and a rubidium-based Miniature Atomic Clock (MAC), both produced by Microchip.An example case of two spacecraft in a circular, low-Earth orbit receiving GPS position, GPS timing, and laser pulse time-of-flight measurements is simulated.The positions and velocities of the two spacecraft at a reference epoch and the constant clock model coefficients are estimated.Polynomial models of different orders were used as clock models. The effect of clock model order on the root-mean-square (RMS) of the clock error is apparent in the case using GPS and lasing measurements, showing that the clock model improves with increasing clock model order. Results compare the estimated clock model of a mission operation that only uses GPS measurements and a mission operation that uses both GPS and laser pulse time-of-flight measurements between spacecraft referenced to their on-board CSACs or on-board MACs. Including lasing measurements reduces the RMS clock model error by approximately 80% of the RMS of the cases with only GPS measurements.This simulation tool can be used to optimize the lasing operations schedule based on mission timing performance objectives. During this presentation, I will discuss the details of the simulation and clock model estimation, as well as discuss the results.I will compare the results of incorporating lasing timing measurements to using only GPS measurements and the outcomes of using different orders of polynomials.

Timing Performance↗
DOE OSTI2025

Multiple Hypothesis Tracking for Opportunistic Transmitter Identification

The exploitation of radio frequency (RF) signals from Low Earth Orbit (LEO) communication satellites for the purposes of navigation is an active field of research. In this alternative navigation system, navigation observables are passively extracted from existing RF signals. Because these signals are not designed for navigation purposes and often have proprietary signal structures that are unknown to the receiver, they lack much of the information required for navigation systems or such information is unavailable to the receiver.

42 ENGINEERING↗
NASA NTRS1978

A set of satellite experiments for studying the magnetosphere-ionosphere communications

Magnetospheric substorms are one of the basic problems in the physics of near earth space. They appear as magnetic and ionospheric perturbations, disturbances in radio communication, polar auroras and electromagnetic radiation in different frequency ranges. These phenomena were studied from single satellites. However, it is impossible to study these phenomena adequately without simultaneous measurements from at least two different positions with identical instruments. A suitable program can be developed based on the Interkosmos work using new achievements in electronics.

Gringauz, K. I.↗
NASA NTRS1986

Sequential ranging integration times in the presence of CW interference in the ranging channel

The Deep Space Network (DSN), managed by the Jet Propulsion Laboratory for NASA, is used primarily for communication with interplanetary spacecraft. The high sensitivity required to achieve planetary communications makes the DSN very susceptible to radio-frequency interference (RFI). In this paper, an analytical model is presented of the performance degradation of the DSN sequential ranging subsystem in the presence of downlink CW interference in the ranging channel. A trade-off between the ranging component integration times and the ranging signal-to-noise ratio to achieve a desired level of range measurement accuracy and the probability of error in the code components is also presented. Numerical results presented illustrate the required trade-offs under various interference conditions.

Mathur, Ashok↗
NASA NTRS1990

The scientific mission of Ulysses

The major aims of the Ulysses' scientific investigations of the heliosphere at all latitudes are described. Missions goals include the assessment of the global three-dimensional properties of the interplanetary magnetic field and solar wind, the study of the composition of the solar wind plasma at different heliographic latitudes, and the study of the acceleration of energetic particles in solar flares. Waves, shocks and other discontinuities in the solar wind will be investigated through sampling of various plasma conditions, and interplanetary dust and cosmic rays will be analyzed. Other important goals include the search for gamma-ray-burst sources and for low-frequency gravitational waves by using the spacecraft's radio communication link. Achievement of the Ulysses' solar pole trajectory, which will utilize both launch vehicle thrust and gravitational pull, is also described.

Wenzel, K.-P.↗
NASA NTRS2004

Modular Wireless Data-Acquisition and Control System

A modular wireless data-acquisition and control system, now in operation at Kennedy Space Center, offers high performance at relatively low cost. The system includes a central station and a finite number of remote stations that communicate with each other through low-power radio frequency (RF) links. Designed to satisfy stringent requirements for reliability, integrity of data, and low power consumption, this system could be reproduced and adapted to use in a broad range of settings.

Perotti, Jose↗
NASA NTRS2013

Demonstration of Space Optical Transmitter Development for Multiple High Frequency Bands

As the demand for multiple radio frequency carrier bands continues to grow in space communication systems, the design of a cost-effective compact optical transmitter that is capable of transmitting selective multiple RF bands is of great interest, particularly for NASA Space Communications Network Programs. This paper presents experimental results that demonstrate the feasibility of a concept based on an optical wavelength division multiplexing (WDM) technique that enables multiple microwave bands with different modulation formats and bandwidths to be combined and transmitted all in one unit, resulting in many benefits to space communication systems including reduced size, weight and complexity with corresponding savings in cost. Experimental results will be presented including the individual received RF signal power spectra for the L, C, X, Ku, Ka, and Q frequency bands, and measurements of the phase noise associated with each RF frequency. Also to be presented is a swept RF frequency power spectrum showing simultaneous multiple RF frequency bands transmission. The RF frequency bands in this experiment are among those most commonly used in NASA space environment communications.

Nguyen, Hung↗
NASA NTRS1994

Economical 10-Meter-Class Ground-Based Receiver for Deep-Space Optical Communications

Modifications to an existing radiofrequency telescope are described which would enable it to operate as an R&D optical receiver terminal for deep-space communications. The low overall cost of the telescope is due to the unique process of fabricating the 10.4 meter primary mirror and its support structure, the lightweight of the primary (10-11 kg/m 2 ), and the requirement that the telescope act only as a photon bucket, which lowers the cost of optically figuring and polishing the mirror. The entrie optical ground terminal facility is estimated to cost approximately $10M to construct.

deep-space↗
NASA NTRS2023

Channel Measurements for Switching Strategies in Hybrid RF/Optical Communications

Free space optical (FSO) communication links increase data rate, reduce size and power, and increase security. These criteria are particularly important in space communication. Increasing mission complexity and crowding of lower frequency bands is driving the need for optical communications. This makes FSO communication technology extremely attractive, and there is significant ongoing work towards the development of FSO transceivers, ground stations, and relays. Notable projects include the Laser Communications Relay Demonstrator (LCRD), Integrated LCRD Low-Earth Orbit User Modem and Amplifier Terminal (ILLUMA-T), and CubeSat Laser Infrared Crosslink (CLICK) CubeSats. These technologies will eventually operate in unison with existing Radio Frequency (RF) systems, but there is little experimental investigation of such hybrid networks. This paper presents some experimental underpinnings of switching strategies for hybrid RF/FSO systems in various attenuation conditions. A 170 m optical path was constructed in an enclosed test chamber where atmospheric conditions can be tightly controlled. The performance of a 1550 nm infrared FSO link was evaluated in this chamber under varying conditions of turbulence and jitter. The system will eventually be used to investigate switching criteria between the FSO and RF channels. Optimizing the use of RF/FSO communication links will allow data rate, size, power, and security improvements. Therefore, this research will help to mature the network architecture and improve the performance of communication networks to be used for LEO, GEO, Lagrange, Lunar missions and beyond.

Space Networks↗
NASA NTRSDate not supplied

Addressing the High-Rate Deep Space Communications Shortfall in NASA’s Space Technology Mission Directorate's Envisioned Future

NASA’s Space Technology Mission Directorate (STMD) has identified key technologies needed for future crewed and robotic exploration and science missions. STMD is helping to build the civilian technology base by working with other NASA Mission Directorates, other United States government agencies, commercial industry, and academia to identify technology shortfalls and to develop plans to address them. One critical area of shortfalls lies with deep space communications and navigation. While NASA had huge success to date with the Deep Space Network (DSN), recent studies have shown that without enhancements to current systems, the DSN will be unable to support the anticipated increases in the pace of space exploration or the expected higher data rates from deep space needed soon without severely impacting other missions. High-rate communications from the Moon and beyond is needed to enable future exploration and science missions currently being developed or under consideration. For example, a robust communications infrastructure will be needed to support a sustained human presence on the Moon and its eventual industrialization. High data rate trunk lines between the Earth and the Moon are needed to reduce the number of individual links. The human exploration of Mars will also require high-rate communications between Earth and Mars. Return data rates to Earth from Mars for a single link, for example, are anticipated to be greater than 100 Mb/s; forward data rates to Mars, based on experience from the International Space Station, are anticipated to be greater than 20 Mb/s. Future deep space science missions will also require higher data rates than possible with today’s technology and the current capabilities of the DSN. To support future exploration and science needs, it will be necessary to upgrade the DSN to enhance its radio frequency (RF) capabilities. In addition, it is envisioned that NASA will gradually introduce optical communications to augment its RF systems. Optical communications will enable new science and exploration missions by providing high data rates and better navigation over long distances. This paper will briefly describe STMD’s envisioned future for deep space communications in the 2030+ timeframe and the technology roadmaps being developed for both radio frequency and optical systems.

Bernard Edwards↗
NASA NTRS2014

An Optimizing Space Data-Communications Scheduling Method and Algorithm with Interference Mitigation, Generalized for a Broad Class of Optimization Problems

NASA's space data-communications infrastructure-the Space Network and the Ground Network-provide scheduled (as well as some limited types of unscheduled) data-communications services to user spacecraft. The Space Network operates several orbiting geostationary platforms (the Tracking and Data Relay Satellite System (TDRSS)), each with its own servicedelivery antennas onboard. The Ground Network operates service-delivery antennas at ground stations located around the world. Together, these networks enable data transfer between user spacecraft and their mission control centers on Earth. Scheduling data-communications events for spacecraft that use the NASA communications infrastructure-the relay satellites and the ground stations-can be accomplished today with software having an operational heritage dating from the 1980s or earlier. An implementation of the scheduling methods and algorithms disclosed and formally specified herein will produce globally optimized schedules with not only optimized service delivery by the space data-communications infrastructure but also optimized satisfaction of all user requirements and prescribed constraints, including radio frequency interference (RFI) constraints. Evolutionary algorithms, a class of probabilistic strategies for searching large solution spaces, is the essential technology invoked and exploited in this disclosure. Also disclosed are secondary methods and algorithms for optimizing the execution efficiency of the schedule-generation algorithms themselves. The scheduling methods and algorithms as presented are adaptable to accommodate the complexity of scheduling the civilian and/or military data-communications infrastructure within the expected range of future users and space- or ground-based service-delivery assets. Finally, the problem itself, and the methods and algorithms, are generalized and specified formally. The generalized methods and algorithms are applicable to a very broad class of combinatorial-optimization problems that encompasses, among many others, the problem of generating optimal space-data communications schedules.

ground stations↗
NASA NTRSDate not supplied

International Coordination and Cooperation on LunaNet Spectrum

LunaNet is planned to be the network of networks operated by a set of cooperating organizations to provide interoperable Communications, networking, Position, Navigation, and Timing (CPNT) services to users on and around the Moon based on a framework of mutually agreed-upon standards, protocols, frequency bands and interface requirements. LunaNet follows a service-oriented architecture that is agnostic about the types of organizations that provide services, e.g., government, industry, or academia. LunaNet is open, scalable, resilient, secure, and extensible. To achieve these goals, LunaNet Service Providers (LNSP) must coordinate with each other to define and develop the architecture, to plan initial and evolved capabilities, and to operate their networks. One of the central LunaNet tenets is the use of shared spectrum. For example, the Lunar Augmented Navigation Service (LANS) acts like a Global Navigation Satellite System (GNSS) such as the US Global Positioning System (GPS) or European Galileo but the LNSPs’ contributions to LunaNet must use the same frequency band (2483.5 MHz-2500.0 MHz) and transmit the same waveform synchronized by highly accurate clocks so that Users ‘see’ one virtual network and use the same multilateration algorithm to determine their positions. This necessitates a high degree of spectrum coordination. NASA’s Lunar and Human Spaceflight Spectrum Management Team has been actively supporting development of the LunaNet Interoperability Specification (LNIS), soliciting inputs from spectrum policy and planning experts across NASA, ESA and JAXA. Cislunar spectrum use considerations have been studied and adjudicated within the Space Frequency Coordination Group (SFCG) and inform the ongoing discussion of a lunar communication and navigation architecture within the existing radio regulatory framework of the International Telecommunication Union, leading to the 2027 World Radiocommunication Conference (WRC-27). The frequency plan contained in the publicly released draft of the LunaNet Interoperability Specification reflects the initial phase of exploration (roughly to 2030) defining an optimal set of radio frequencies in appropriately allocated services consistent with WRC-23 decisions for use by known or planned CPNT applications, while striving to maximize coexistence and compatibility amongst cislunar systems and other systems within the near-Earth regime (< 2 million km from Earth). Important considerations include: protection of extremely sensitive receive-only radio astronomy systems on the lunar far side, known as the Shielded Zone of the Moon (SZM); compatibility between Direct with Earth (DWE) communications links and links needed to support relay satellites in lunar orbit with their customer systems on orbit or on the lunar surface; compatibility between multiple lunar surface communications systems and capabilities over varied and challenging terrain and distances; as well as ensuring compatibility and interoperability between navigation systems which either leverage Earth-based or in-situ lunar systems. In addition, the lunar CPNT architecture is envisioned to be the basis – with adjustments – of the future Mars CPNT architecture as we expand into the solar system using Interplanetary Networking (IPN). The second phase of lunar spectrum definition will address planned international capabilities for the next decade that will require action at WRC-27 and beyond. This paper will discuss each of these considerations in more depth and how the current LunaNet frequency plan addresses them.

LunaNet↗
NASA NTRS1975

Advanced communications experiments for Spacelab

The Spacelab design and mission capabilities appear to provide a practical vehicle for meeting communication experiment needs. Results of recent discussions and numerous contractual activities have conclusively corroborated the potential useful role that a manned laboratory in space can afford to the communications community. Some examples of the experiments that appear presently as strong candidates for early flights on the Spacelab missions of the 1980s are discussed. Particular attention is given to radio frequency interference, bandwidth compressive modulation, laser experimentation, and use of large deployable communications antenna. It can be expected that the Spacelab will reduce the time, risk, and cost for conducting some communications experiments and developing the related space technology.

Ehrlich, E.↗
NASA NTRS1981

ATS-6 engineering performance report. Volume 5: Propagation experiments

Propagation experiments at 1550 MHz to 1650 MHz are reviewed, including the Integrated L-Band Experiments system and results, and the Mobile L-Band Terminals for Satellite Communication system. Experiments at 4 GHz to 6 GHz are reported, including the Radio Frequency Interferometer Measurements system and results, and Earth station antenna evaluations. Experiments above 10 GHz are discussed, including Comsat and ATS-6 millimeter wave propagation/experiments, and communication ATS-6 version at 20 and 30 GHz.

Wales, R. O.↗
NASA NTRS2012

670-GHz Down- and Up-Converting HEMT-Based Mixers

A large category of scientific investigation takes advantage of the interactions of signals in the frequency range from 300 to 1,000 GHz and higher. This includes astronomy and atmospheric science, where spectral observations in this frequency range give information about molecular abundances, pressures, and temperatures of small-sized molecules such as water. Additionally, there is a minimum in the atmospheric absorption at around 670 GHz that makes this frequency useful for terrestrial imaging, radar, and possibly communications purposes. This is because 670 GHz is a good compromise for imaging and radar applications between spatial resolution (for a given antenna size) that favors higher frequencies, and atmospheric losses that favor lower frequencies. A similar trade-off applies to communications link budgets: higher frequencies allow smaller antennas, but incur a higher loss. All of these applications usually require converting the RF (radio frequency) signal at 670 GHz to a lower IF (intermediate frequency) for processing. Further, transmitting for communication and radar generally requires up-conversion from IF to the RF. The current state-of-the-art device for performing the frequency conversion is based on Schottky diode mixers for both up and down conversion in this frequency range for room-temperature operation. Devices that can operate at room temperature are generally required for terrestrial, military, and planetary applications that cannot tolerate the mass, bulk, and power consumption of cryogenic cooling. The technology has recently advanced to the point that amplifiers in the region up to nearly 1,000 GHz are feasible. Almost all of these have been based on indium phosphide pseudomorphic high-electron mobility transistors (pHEMTs), in the form of monolithic microwave integrated circuits (MMICs). Since the processing of HEMT amplifiers is quite differ en t from that of Schottky diodes, use of Schottky mixers requires separate MMICs for the mixers and amplifiers. Fabrication of all the down-/up-conversion circuitry on single MMICs, using a ll-HEMT circuits, would constitute a major advance in circuit simplicity.

Schlecht, Enrich T.↗
NASA NTRS1973

Use of the Space Shuttle for communications and navigation experiments

It is seen that a Shuttle laboratory will provide a facility for meeting the continuing need for planning frequency and orbit utilization and specialized radio interference measurements. The Shuttle could be used for placing communications and navigation satellites into the desired orbit, and also for conducting laser communications tests with the aim of developing the required technology and acquisition techniques for space-to-space and space-to-ground telecommunications. Other uses include the proof-testing of large spacecraft antenna structures and their erection mechanisms, and the testing of high-voltage high-current communications satellite components and subsystems.

Marsten, R. B.↗