Search NASA⌕ Search

SEARCH · Search NASA

Results for “recombination layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Plasma acceleration at the earth's magnetopause - Evidence for reconnection

Observations of high-speed plasma at the magnetopause in agreement with theoretical predictions of magnetic field reconnection are reported. Plasma ion and electron distributions measured by the quadrispherical analyzers on board the ISEE 1 and 2 spacecraft were obtained during the outbound traversal of the subsolar magnetopause. Plasma flow speeds of up to 450 km/sec were observed in the magnetopause layer, in contrast to speeds of 50 to 100 km/sec in the adjacent magnetosheath. The observations agree with the predictions of the reconnection model of the dayside magnetopause, in which the magnetopause is described as a rotational discontinuity, or a large-amplitude Alfven wave. It is noted that the lack of observations of plasma acceleration in most other cases of favorable magnetic field orientation could be a product of the rarity of magnetic recombination, or its small scale and nonstationarity.

Paschmann, G.↗

Bragg scattering measurement of atmospheric plasma decay

The decay processes of the plasma layers generated by two intersecting microwave pulses in 1 torr dry air are investigated by Bragg scattering method. The results of measurement show that the electrons decay initially at the three-body attachment rate. However, when enough negative molecule ions are produced through the electron attachment process, the regeneration of electrons via detachment process is increased and eventually balances out the electron attachment loss. The net electron loss is then dominated by the recombination process. The temporal evolution of electron density has also been reproduced by the numerical result of a system of three modal equations for a best fit detachment rate.

Zhang, Y. S.↗

The recombination velocity at III-V compound heterojunctions with applications to Al (x) Ga(1-x)As-GaAs(1-y)Sb(y)

Interface recombination velocity in AlxGa1-xAs-GaAs and A10.85 Ga0.15As-GaAs1-ySby heterojunction systems was studied as a function of lattice mismatch. The results are applied to the design of highly efficient III-V heterojunction solar cells. A horizontal liquid-phase epitaxial growth system was used to prepare p-p-p and p-p-n double heterojunction test samples with specified values of x and y. Samples were grown at each composition, with different GaAs and GaAsSb layer thicknesses. A method was developed to obtain the lattice mismatch and lattice constants in mixed single crystals grown on (100) and (111)B oriented GaAs substrates.

Kim, J. S.↗

Thermophysical aspects of re-entry flows

The present conference discusses low density aerothermodynamics, the drag of bodies in rarefied hypersonic flow, transitional hypervelocity aerodynamic simulation and scaling, high temperature kinetics and transport properties, electron-nitrogen molecule collisions in high temperature nonequilibrium air, theoretical studies of dissociative recombination, the transport properties of some atom/ion interactions in air, and the interaction energies, dipole transition moments, and transport cross sections of N(+)-N and O(+)-O. Also discussed are the results of studies of potential fluid mechanisms for enhanced stagnation heating, vortex-induced leeward heating on a biconic at Mach 6 and 10, the effects of surface discontinuities on convective heat transfer in hypersonic flow, computational convergence in chemical reacting flows, and three-dimensional viscous shock layer applications for the Space Shuttle Orbiter.

Moss, J. N.↗

Impurity concentrations and surface charge densities on the heavily doped face of a silicon solar cell

Increased solar cell efficiencies are attained by reduction of surface recombination and variation of impurity concentration profiles at the n(+) surface of silicon solar cells. Diagnostic techniques are employed to evaluate the effects of specific materials preparation methodologies on surface and near surface concentrations. It is demonstrated that the MOS C-V method, when combined with a bulk measurement technique, yields more complete concentration data than are obtainable by either method alone. Specifically, new solar cell MOS C-V measurements are combined with bulk concentrations obtained by a successive layer removal technique utilizing measurements of sheet resistivity and Hall coefficient.

Weinberg, I.↗

The ionization of a low-density intercloud medium by a single O star

The ionization structure of hydrogen in a cloud-containing low-density gas surrounding an O star is calculated, emphasizing how UV photons cause the ionization of hydrogen in regions which are totally obscured from the star by neutral clouds. Particular consideration is given to the ionization of such obscured regions by diffuse Lyman continuum radiation produced when H(+) recombines directly to the ground state. The assumed physical structure of the cloud-containing neighborhood of an O star is discussed, a method is outlined for expressing the emission and absorption properties of the neutral clouds and their shadows in terms of effective volume emissivities and absorption coefficients on a line of sight, and equations of radiative transfer are derived for diffuse and stellar radiation in a cloud-containing H II region. Reradiation of Lyman continuum photons from the ionized boundary layer of a neutral cloud or shadow is analyzed. The expected emission measure across a large cloud-containing H II region is determined and found to compare well with that obtained from observations of H-alpha emission around runaway O stars. It is shown that the hydrogen in cloud shadows may be completely ionized by diffuse radiation within approximately half the Stroemgren radius, depending on the extent of that radius, the average frequency of the Lyman continuum radiation from the star, and the average cloud size.

Elmegreen, B. G.↗

Shock tube study of the reaction H plus O2 plus Ar yields HO2 plus Ar

Rate coefficient data for the recombination reaction H + 02 + Ar yields H02 + Ar have been determined from studies of lean hydrogen-oxygen mixtures behind incident shock waves over the temperature range of 948 to 1125 K. Hydroxyl radical concentration profiles were measured by ultraviolet absorption spectroscopy, and rate data were obtained through analysis of induction time and exponential growth parameter data. Analysis of the data yielded a rate coefficient which was generally lower than most of the more recent values obtained from shock tube studies. The effect of boundary layer formation on the conditions behind the shock was also examined and found to be negligible.

Jachimowski, C. J.↗

Development of high-efficiency solar cells on silicon web

Work is reported aimed at identifying and reducing sources of carrier recombination both in the starting web silicon material and in the processed cells. Cross-sectional transmission electron microscopy measurements of several web cells were made and analyzed. The effect of the heavily twinned region on cell efficiency was modeled, and the modeling results compared to measured values for processed cells. The effects of low energy, high dose hydrogen ion implantation on cell efficiency and diffusion length were examined. Cells were fabricated from web silicon known to have a high diffusion length, with a new double layer antireflection coating being applied to these cells. A new contact system, to be used with oxide passivated cells and which greatly reduces the area of contact between metal and silicon, was designed. The application of DLTS measurements to beveled samples was further investigated.

Meier, D. L.↗

Hydrocarbon Ions in the Ionospheres of Titan and Jupiter

Two examples are given of models of ion chemistry in reducing atmospheres: Titan, which is a satellite of Saturn, and Jupiter, the largest of the gas giants. In both ionospheres, layers of hydrocarbon and/or C, H, and N-containing ions have been predicted to appear, with larger ions dominating at lower altitudes. Altitude profiles are presented for individual C1- and C2-hydrocarbon ions and larger ions that are represented for example, as C(x)H(y)(+) and C(x)H(y)N(x)(+). The accuracy of the predictions is, however, limited by the availability of information about the chemistry of these ions. In addition to rate coefficients and product channels for ion-molecule reactions, dissociative recombination coefficients and branching ratios are needed for many hydrocarbon and and related ions.

Fox, J. L.↗

Effect of surface catalytic activity on stagnation heat-transfer rates.

An experiment was made to determine the effect heterogeneous catalytic surface reactions have on heat-transfer rates in highly frozen low-density stagnation-point boundary layers. Data were obtained in arc-heated facilities that were capable of producing large percentages of chemical energy frozen in a supersonic freestream. The heat-transfer rate to a silicon-dioxide surface was reduced to a minimum value of only one-third of the value obtained on relatively active nickel and platinum surfaces. This is the result of its low catalytic efficiency. Ionization energy was recovered on both the active and the inactive surfaces, indicating that this energy either was released many times faster than the recombination energy or was not controlled by the surface composition.

Anderson, L. A.↗

Nonequilibrium boundary layer at a stagnation point for a hydrogen-helium stream over ablating graphite

The nonequilibrium axisymmetric stagnation point boundary layer over an ablating graphite surface is considered. The external stream is a high temperature mixture of hydrogen and helium. Variable thermodynamic and transport properties are assumed. Lennard-Jones potential model is used to calculate the transport coefficients of each species. Although the mixture rules for viscosity of the gas mixture are used, the weighting functions are more sophisticated than those commonly employed. For the conductivity of the mixture, generalized Wassiljewa coefficients are used. Seven species with 28 dissociation/recombination reactions are considered. Hansen's model for the dissociation rate constants is employed. The recombination rate constants are obtained by invoking detailed balance principles assisted by the JANAF thermodynamic data and the Hansen-Pearson thermodynamic data for C3.

Liu, T.-M.↗

Impurity effects in silicon for high efficiency solar cells

Model analyses indicate that sophisticated solar cell designs including, e.g., back surface fields, optical reflectors, surface passivation, and double layer antireflective coatings can produce devices with conversion efficiencies above 20 percent (AM1). To realize this potential, the quality of the silicon from which the cells are made must be improved; and these excellent electrical properties must be maintained during device processing. As the cell efficiency rises, the sensitivity to trace contaminants also increases. For example, the threshold Ti impurity concentration at which cell performance degrades is more than an order of magnitude lower for an 18-percent cell. Similar behavior occurs for numerous other metal species which introduce deep level traps that stimulate the recombination of photogenerated carriers in silicon. Purification via crystal growth in conjunction with gettering steps to preserve the large diffusion length of the as-grown material can lead to the production of devices with efficiencies aboved 18 percent, as has been verified experimentally.

Hopkins, R. H.↗

Effects of impurities on silicon solar-cell performance

Model analyses indicate that sophisticated solar cell designs (back surface fields, optical reflectors, surface passivation, and double layer antireflective coatings) can produce devices with conversion efficiencies above 20%. To realize this potential, the quality of the silicon from which the cells are made must be improved; and these excellent electrical properties must be maintained during device processing. As the cell efficiency rises, the sensitivity to trace contaminants also increases. For example, the threshold Ti impurity concentraion at which cell performance degrades is more than an order of magnitude lower for an 18% cell than for a 16% cell. Similar behavior occurs for numerous other metal species which introduce deep level traps that stimulate the recombination of photogenerated carriers in silicon. Purification via crystal growth in conjunction with gettering steps to preserve the large diffusion length of the as grown material can lead to the production of devices with efficiencies above 18%, as verified experimentally.

Hopkins, R. H.↗

A thin-shock-layer solution for nonequilibrium, inviscid hypersonic flows in earth, Martian, and Venusian atmospheres

An approximate inverse solution is presented for the nonequilibrium flow in the inviscid shock layer about a vehicle in hypersonic flight. The method is based upon a thin-shock-layer approximation and has the advantage of being applicable to both subsonic and supersonic regions of the shock layer. The relative simplicity of the method makes it ideally suited for programming on a digital computer with a significant reduction in storage capacity and computing time required by other more exact methods. Comparison of nonequilibrium solutions for an air mixture obtained by the present method is made with solutions obtained by two other methods. Additional cases are presented for entry of spherical nose cones into representative Venusian and Martian atmospheres. A digital computer program written in FORTRAN language is presented that permits an arbitrary gas mixture to be employed in the solution. The effects of vibration, dissociation, recombination, electronic excitation, and ionization are included in the program.

Grose, W. L.↗

The peculiar type II supernova 1993J in M81: Transition to the nebular phase

We present optical spectra of the bright, peculiar Type II supernova 1993J in M81 spanning the first 14 months of its existence, revealing its transition to the nebular phase. Unlike the case in normal Type II supernovae, during the first 2-10 months the H-alpha emission line gradually becomes less prominent relative to other features such as (O I) lambda lambda 6300, 6364 and (Ca II) lambda lambda 7291, 7324, as we had predicted based on early-time (tau less than or approximately equal to 2 months) spectra. The nebular spectrum resembles those of the Type Ib/Ic supernovae 1985F and 1987M, although weak H-alpha emission is easily visible even at late times in SN 1993J. At tau = 8 months a close similarity is found with the spectrum of SN 1987K, the only other Type II supernova known to have undergone such a metamorphosis. The emission lines are considerably broader than those of normal Type II supernovae at comparable phases, consistent with the progenitor having lost a majority of its hydrogen envelope prior to exploding. Consequently, there is now little doubt that Type Ib, and probably Type Ic, supernovae result from core collapse in stripped, massive stars; models of the chemical evolution of galaxies in which these subtypes are ascribed to exploding white dwarfs must be appropriately modified. Although all of the emission lines in spectra of SN 1993J fade roughly exponentially for a considerable time, the fading of H-alpha begins to slow down at tau approximately = 8 months, and in the interval tau = 10-14 months its flux is constant, or even slightly rising in the wings of the line. This behavior, together with the box-like shape and great breadth (full width at half maximum (FWHM) approximately = 17 000 km/s) of the line profile, suggests that the H-alpha emission is being produced by the high-velocity outer layer of hydrogen ejecta interacting with circumstellar gas released by the progenitor prior to its explosion. A similar phenomenon has previously been seen at later phases in several Type II supernovae, most notably SN 1980K. Bumps (FWHM approximately = 1000 km/s, amplitude approximately = 20%) in the H-alpha profile are probably indicative of Rayleigh-Taylor instabilities in the cool gas behind the reverse shock. A very narrow component (unresolved, FWHM less than or approximately equal to 200 km/s) of H-alpha at the symmetric velocity of SN 1993J may instead be produced by a superposed H II region, or perhaps by recombination in a large circumstellar shell or ring that was ionized during the first few hours after outburst. In the near future the spectrum of SN 1993J should become increasingly dominated by broad H-alpha emission.

Filippenko, Alexei V.↗

Development of ion implanted gallium arsenide transistors

Techniques were developed for creating bipolar microwave transistors in GaAs by ion implantation doping. The electrical properties of doped layers produced by the implantation of the light ions Be, Mg, and S were studied. Be, Mg, and S are suitable for forming the relatively deep base-collector junction at low ion energies. The electrical characteristics of ion-implanted diodes of both the mesa and planar types were determined. Some n-p-n planar transistor structures were fabricated by implantation of Mg to form the base regions and Si to form the emitters. These devices were found to have reasonably good base-collector and emitter-base junctions, but the current gain beta was small. The low was attributable to radiative recombination in the base region, which was extremely wide.

Hunsperger, R.↗

Meteoric ion production near Jupiter

Meteoric ion layer formation within the Jovian atmosphere is examined with attention to metallic ion production in the lower ionosphere. The Fe(+) impact ionization rate within the Jovian atmosphere peaks above the mesopause with a magnitude of approximately 0.5 cu cm/sec and is much less than the ambient ionosphere photoionization rates near the late afternoon Pioneer 10 ionosphere occultation. Charge exchange of the ablated neutral Fe atoms with ambient ions can result in an Fe(+) production rate of about 10 cu cm/sec. Ignoring transport, steady state Fe(+) density maxima of about 10,000 or 1,000,000 cu cm can be maintained when Fe(+) loss is through radiative association or radiative recombination respectively. Even if an estimated lower limit to the incident meteoroid flux is used based on a meteoroid spatial density which does not vary with distance from the sun, the corresponding Fe(+) peak densities are 1,000 and 500,000 cu cm, respectively. Meteoric ion densities may thus be important in the Jovian lower ionosphere.

Grebowsky, J. M.↗

Assessment of thermochemical nonequilibrium and slip effects for Orbital Reentry Experiment (OREX)

Results are provided from a viscous shock layer (VSL) analysis of the reentry flowfield around the forebody of the Japanese Orbital Reentry Experiment (OREX) vehicle. This vehicle is a 50 deg. spherically blunted cone with a nose radius of 1.35 m and a base diameter of 3.4 m. Calculations are done for the OREX trajectory from 105 to 48.4 km altitude range. A 7-species chemical model is found adequate for the flowfield analysis. However, for altitudes greater than 84 km, the low density effects (such as thermal nonequilibrium and slip) are to be implemented for good agreement between the predictions and flight inferred heat-transfer rate data. Further, at altitudes lower than 84 km, a finite surface recombination probability is to be employed in place of a non-catalytic surface for better comparison between the calculations and data. VSL results are also compared with the direct simulation Monte Carlo (DSMC) predictions at high altitudes (greater than 80 km) and the electron number density data for three altitudes in the OREX trajectory. Overall, there is a good comparison between the flight data and calculated results. With the ongoing refinements in data extraction procedures, the OREX data should prove valuable for validating theoretical models employed in flowfield codes for calculation of reacting-gas flowfields.

Gupta, Roop N.↗