Search NASA⌕ Search

SEARCH · Search NASA

Results for “relational dependencies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Extraterrestrial platinum group nuggets in deep-sea sediments

A previously unrecognized property of iron cosmic spheres is reported. The most common spheres larger than 300 microns do not, in fact, contain FeNi metal cores, but instead contain a micrometer-sized nugget composed almost entirely of platinum group elements. These elements appear to have been concentrated by the oxidation of molten meteoritic metal during atmospheric entry. This process is critically dependent on the relative abundance of oxygen in the atmosphere, and the first appearance of the nuggets in the geological record may provide a marker indicating when the oxygen abundance attained half of its present level.

Brownlee, D. E.↗

Galileo internal electrostatic discharge program

The Galileo spacecraft which will orbit Jupiter in 1988 will encounter a very harsh environment of energetic electrons. These electrons will have sufficient energy to penetrate the spacecraft shielding, consequently depositing charges in the dielectric insulating materials or ungrounded conductors. The resulting electric field could exceed the breakdown strength of the insulating materials, producing discharges. The transients produced from these Internal Electrostatic Discharges (IESD) could, depending on their relative location, be coupled to nearby cables and circuits. These transients could change the state of logic circuits or degrade or even damage spacecraft components, consequently disrupting the operation of subsystems and systems of the Galileo spacecraft during its expected mission life. An extensive testing program was initiated for the purpose of understanding the potential threats associated with these IESD events. Data obtained from these tests were used to define design guidelines.

Leung, P. L.↗

Nebular volatile fractionations associated with chondrule formation

Chondrules are ubiquitous constituents of primitive solar system matter, indicating that chondrule formation was an important and widespread process in the early history of the solar system. If chondrules formed from fine grained CI like precursors, some volatile fractionation must have accompanied chondrule formation. This is not likely related to a separation of chondrules from gas (and dust, fine enough to be coupled to gas) shortly after formation, a process required by most models of chondrule formation. If chondrules are continuously formed in and removed from a region of the solar nebula, the chemical environment in this region will change. Vaporization of solid increases both oxygen and sulfur in the gas relative to H. Depending on the oxygen/sulfur ratio, which may vary widely as a function of precursor composition and temperature, two cases can be distinguished: (1) sulfur requires reaction with solid to condense, and thus may become much more enriched than 0; (2) if a significant amount of silicate is vaporized together with sulfides and does not recondense, changes in H/O outweigh S enrichment. In combination, these two effects may be able to account for much of the chemical variation among various types of chondrites. Opaque, fine grained matrix in unequilibrated chondrites, which is thought to derive from dust, has indeed been found to have a volatile element abundance complementary to chondrules.

Kracher, A.↗

Protostellar disks and star formation

The status of theoretical work on protostellar disks is reviewed. Accretion disk theory and its application to models of the solar nebula and protostellar disks are discussed. A unified view of the process of star formation is presented, starting from the evolution of molecular clouds, and leading naturally to the formation of protostellar disks. The models used to describe this process are idealized, but are believed to provide good prototypes that well represent the essential hydromagnetic phenomena involved in star and disk formation. Several possible evolutionary paths and final configurations are qualitatively discussed, showing how the outcomes depend on the relative efficiencies of various angular momentum transport processes.

Cassen, P.↗

The generation of electrostatic noise in the plasma sheet boundary layer

The one and two ion beam instability is considered as a possible explanation for the observations of broadband electrostatic noise in the plasma sheet region of the geomagnetic tail. When only hot streaming plasma sheet boundary layer ions are present, no broadband waves are excited. Cold, streaming ionospheric ions can generate electrostatic broadband waves propagating in the slow beam acoustic mode, but the growth rates of the waves are significantly enhanced when hot boundary layer ions are present. (Both the slow and fast beam acoustic modes can be excited, depending on the relative ion drift.) This model predicts that the wave intensity of the broad band noise should peak in the plasma sheet boundary layer. Observations of less intense electrostatic waves in the lobes and plasma sheet are likely a result of the absence of hot ion beams or large ion temperatures, respectively, which result in smaller growth rates. The ion beam instability may play an important role in the formation of the central plasma sheet.

Dusenbery, P. B.↗

Dynamic fracture toughness

Dynamic fracture toughness versus crack velocity relations of Homalite-100, polycarbonate, hardened 4340 steel and reaction bonded silicon nitride are reviewed and discrepancies with published data and their probable causes are discussed. Data scatter in published data are attributed in part to the observed fluctuations in crack velocities. The results reaffirmed our previous conclusion that the dynamic fracture toughness versus crack velocity relation is specimen dependent and that the dynamic arrest stress intensity factor is not a unique material property.

Kobayashi, A. S.↗

Feasibility experiments on time-resolved fluorosensing applied to oil slicks

The introduction of time resolved observations can provide a very penetrating tool in the practice of laser fluorosensing. The investigations have demonstrated a relevance of multispectral, time resolved analysis for oil fingerprinting. By comparative studies on a variety of crude oils and their most significant fractions, it was found that the process of time decay in a composite oil is characterized by a few steps, which are associated with specific components in the medium light range. The average decay times of these pure fractions are markedly differentiated as to absolute values and spectral spread; as a consequence, the corresponding parameters in the resultant crude are quite sensitive to the particular mixture of these components. Measurements of the time response give then a finer discrimination between oil classes, depending on the relative content of certain fractions. Experiments were pursued with an improved fluorosensor facility, in order to test the application of time resolved fluorosensing to remote samples on water.

Camagni, P.↗

Stability and rheology of dispersions of silicon nitride and silicon carbide

The relationship between the surface and colloid chemistry of commercial ultra-fine silicon carbide and silicon nitride powders was examined by a variety of standard characterization techniques and by methodologies especially developed for ceramic dispersions. These include electrokinetic measurement, surface titration, and surface spectroscopies. The effects of powder pretreatment and modification strategies, which can be utilized to augment control of processing characteristics, were monitored with these technologies. Both silicon carbide and nitride were found to exhibit silica-like surface chemistries, but silicon nitride powders possess an additional amine surface functionality. Colloidal characteristics of the various nitride powders in aqueous suspension is believed to be highly dependent on the relative amounts of the two types of surface groups, which in turn is determined by the powder synthesis route. The differences in the apparent colloidal characteristics for silicon nitride powders cannot be attributed to the specific absorption of ammonium ions. Development of a model for the prediction of double-layer characteristics of materials with a hybrid site interface facilitated understanding and prediction of the behavior of both surface charge and surface potential for these materials. The utility of the model in application to silicon nitride powders was demonstrated.

Feke, Donald L.↗

Stability of the sunlit cometary ionopause

The stability of the sheared MHD flow at the sunlit cometary ionopause at several heliocentric distances is examined, taking into account the effects of ion-neutral drag, sources, curvature, and compressibility. If the ionosphere is regarded as a magnetic field-free cavity, whether it is stable or unstable to the Kelvin-Helmholtz (K-H) mode depends on the value of the velocity shear assumed. Also, for any assumed value of the shear the instability is greater for smaller wavelengths (about 100 km) than for larger (at least 1000 km). It is also shown that even if the ionopause is initially unstable, a modest penetration of the interplanetary magnetic field into the ionosphere could lead to its restabilization. Which of the three instabilities, K-H, flute, or drag, dominates depends on the relative magnitude of the shear, the rather uncertain ion-neutral drag coefficient, and the density ratio across the ionopause. The apparent marginal instability of the ionopause of comet Giacobini-Zinner and the stability of the ionopause of comet Halley are explained essentially in terms of the different solar wind conditions encountered by the two comets.

Ershkovich, A. I.↗

Evolution of interstellar pickup ions in the solar wind

A model is constructed for the evolution of an interstellar pickup ion distribution in the solar wind. The model assumes that the ions are immediately isotropized at ionization and follows the subsequent development of the distribution function as the particles are convected with the solar wind. The effects of energy diffusion in an ambient wave field with a power law spectrum, adiabatic deceleration in the expanding solar wind, and continual addition of newly ionized particles are all included in the model. An analytical expression describing the evolution of the distribution function in phase space velocity and heliocentric radius is obtained. The distribution quickly approaches an asymptotic shape in phase space which depends on the relative efficiency of the energy diffusion process compared to that of adiabatic deceleration. At large distances from the sun the density of pickup ions falls as 1/r in this model. An expression for the distribution function at large distances and for large particle speed is presented. The asymptotic shape should describe the distribution of pickup ions in the outer heliosphere and could be used as an input distribution for a model of the anomalous component of heliosphere and could be used as an input distribution for a model of the anomalous component of cosmic rays. Comparison of this work with the recent observation of He(+) at 1 AU implies that the energy diffusion process is very weak inside 1 AU.

Isenberg, Philip A.↗

The quasi-biennial oscillation of ozone in the tropical middle stratosphere - A one-dimensional model

A one-dimensional model of the quasi-biennial oscillation (QBO) of ozone in the tropical middle stratosphere is derived based on assumed (observed) zonal wind QBO in a coupled dynamic, radiative/photochemical system. It is found that the derived vertical variation of the ozone QBO amplitude has two maxima, one at 32 km and the other at 22 km, and a minimum at 28 km. These are in qualitative agreement with observations. In the height interval 30-35 km, the ozone QBO is closely related to temperature dependent photochemistry, and the ozone and temperature variations are out of phase. Below 28 km, where vertical ozone and thermal transports are important, ozone and temperature oscillations are in phase, but both are approximately 270 deg out of phase with the vertical wind variation.

Ling, Xiu-De↗

Ultraviolet spectra of HH 1 and HH 2 - Spatial variations and the continuum problem

High-SNR 12-hr and 14-hr ultraviolet spectra of HH 1 and HH2 in the IUE short-wavelength range are reported. HH 1 data show a (spatial) half-width of the image size in the C IV 1548-A, 1551-A line which is smaller than the spatial half-width for the semiforbidden C II 1907-A, 1909-A line. A qualitatively similar situation is shown for HH 2, although differences in the image sizes are smaller than for HH 1. The continua of HH 1 and HH2 are found to have a relatively similar wavelength dependence, even in rather small features, and to both have their maxima between 1570 and 1580 A. It is noted that the observed wavelength of the continuum maximum agrees with the position of the maximum of the H2 fluorescence spectrum.

Boehm, K. H.↗

Effect of spatial inlet temperature and pressure distortion on turbofan engine stability

The effects of circumferential and radial inlet temperature distortion, circumferential pressure distortion, and combined temperature and pressure distortion on the stability of an advanced turbofan engine were investigated experimentally at simulated altitude conditions. With circumferential and radial inlet temperature distortion, a flow instability generated by the fan operating near stall caused the high-pressure compressor to surge at, or near, the same time as the fan. The effect of combined distortion was dependent on the relative location of the high-temperature and low-pressure regions; high-pressure compressor stalls occurred when the regions coincided, and fan stalls occurred with the regions separated.

Mehalic, Charles M.↗

Fatigue testing and damage development in continuous fiber reinforced metal matrix composites

A general overview of the fatigue behavior of metal matrix composites (MMC) is presented. The first objective is to present experimental procedures and techniques for conducting a meaningful fatigue test to detect and quantify fatigue damage in MMC. These techniques include interpretation of stress-strain responses, acid etching of the matrix, edge replicas of the specimen under load, radiography, and micrographs of the failure surfaces. In addition, the paper will show how stiffness loss in continuous fiber reinforced metal matrix composites can be a useful parameter for detecting fatigue damage initiation and accumulation. Second, numerous examples of how fatigue damage can initiate and grow in various MMC are given. Depending on the relative fatigue behavior of the fiber and matrix, and the interface properties, the failure modes of MMC can be grouped into four categories: (1) matrix dominated, (2) fiber dominated, (3) self-similar damage growth, and (4) fiber/matrix interfacial failures. These four types of damage will be discussed and illustrated by examples with the emphasis on the fatigue of unnotched laminates.

Johnson, W. S.↗

Effect of spatial inlet temperature and pressure distortion on turbofan engine stability

The effects of circumferential and radial inlet temperature distortion, circumferential pressure distortion, and combined temperature and pressure distortion on the stability of an advanced turbofan engine were investigated experimentally at simulated altitude conditions. With circumferential and radial inlet temperature distortion, a flow instability generated by the fan operating near stall caused the high-pressure compressor to surge at, or near, the same time as the fan. The effect of combined distortion was dependent on the relative location of the high-temperature and low-pressure regions; high-pressure compressor stalls occurred when the regions coincided, and fan stalls occurred with the regions separated.

Mehalic, Charles M.↗

Thermal barrier coating life prediction model development

A life prediction model for correlating the spallation life of ceramic thermal barrier coatings is developed which includes both cyclic and time-dependent damage. The cyclic damage is related to the calculated cyclic inelastic strain range, while the time-dependent damage is related to the oxidation kinetics at the bond-ceramic interface. The cyclic inelastic strain range is calculated using a modified form of the Walker viscoplastic material model; calculation of the oxidation kinetics is based on traditional oxidation algorithms using experimentally determined parameters. The correlation between the actual and predicted spallation lives is within a factor of 3.

Cruse, T. A.↗

Demixing kinetics of phase separated polymer solutions in microgravity

Phase separated solutions of two neutral polymers in buffer provide a useful and versatile medium for the partition separation of biological cells. However, the efficiency of such separations is orders of magnitude lower than the thermodynamic limit. To test the hypothesis that this inefficiency is at least partially due to the convection and sedimentation that occur during the gravity driven demixing that follows introduction of cells to the systems, a series of experiments were begun aimed at performing cell partition in a low g environment. Demixing of isopycnic three polymer solvent systems was studied, experiments were performed on KC-135 aircraft and one shuttle middeck experiment was completed. Analysis of the results of these experiments and comparisons with the predictions of scaling relations for the dependence of phase domain size on time, derived for a number of possible demixing mechanisms, are presented.

Brooks, D. E.↗

Light scattering by an arbitrary particle - The scattering-order formulation of the coupled-dipole method

The field scattered by an arbitrary particle modeled as an array of coupled dipoles can be expressed as an infinite series in terms of scattering orders. The fields of a given scattering order can be calculated from those of the previous order. When the series converge, the approximate method agrees well with the exact theory for a sphere. The maximum size of the dipolar array that can be used with the method as well as the number of terms required for convergence depends on the relative refractive index and the shape of the particle.

Singham, Shermila Brito↗