Search NASA⌕ Search

SEARCH · Search NASA

Results for “representativeness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Training Under-Represented Students in Biological Research at Fisk University

The objectives of our training and research project in biology at Fisk are to motivate and train our African-American undergraduate and graduate students by (a) teaching the basic principles and applications of different biological, biochemical and biophysical research techniques; (b) providing a "hands on experience" with laboratory instrumentation (c) requiring the students to participate in the proposed research project entitled "Cyanobacterial Bioreactors for Oxygen and Ammonia Production under "CELSS" Conditions" to gain confidence in independently conducting experiments and (d) providing training in scientific data collection and presentation to peers in scientific conferences or meetings.

Gunasekaran, Muthukumaran↗
NASA NTRS1999

Piloted Simulation Study of the Effects of High-Lift Aerodynamics on the Takeoff Noise of a Representative High-Speed Civil Transport

As part of an effort between NASA and private industry to reduce airport-community noise for high-speed civil transport (HSCT) concepts, a piloted simulation study was initiated for the purpose of predicting the noise reduction benefits that could result from improved low-speed high-lift aerodynamic performance for a typical HSCT configuration during takeoff and initial climb. Flight profile and engine information from the piloted simulation were coupled with the NASA Langley Aircraft Noise Prediction Program (ANOPP) to estimate jet engine noise and to propagate the resulting source noise to ground observer stations. A baseline aircraft configuration, which also incorporated different levels of projected improvements in low-speed high-lift aerodynamic performance, was simulated to investigate effects of increased lift and lift-to-drag ratio on takeoff noise levels. Simulated takeoff flights were performed with the pilots following a specified procedure in which either a single thrust cutback was performed at selected altitudes ranging from 400 to 2000 ft, or a multiple-cutback procedure was performed where thrust was reduced by a two-step process. Results show that improved low-speed high-lift aerodynamic performance provides at least a 4 to 6 dB reduction in effective perceived noise level at the FAA downrange flyover measurement station for either cutback procedure. However, improved low-speed high-lift aerodynamic performance reduced maximum sideline noise levels only when using the multiple-cutback procedures.

Glaab, Louis J.↗
NASA NTRS2000

Intercomparison of Models Representing Direct Shortwave Radiative Forcing by Sulfate Aerosols

The importance of aerosols as agents of climate change has recently been highlighted. However, the magnitude of aerosol forcing by scattering of shortwave radiation (direct forcing) is still very uncertain even for the relatively well characterized sulfate aerosol. A potential source of uncertainty is in the model representation of aerosol optical properties and aerosol influences on radiative transfer in the atmosphere. Although radiative transfer methods and codes have been compared in the past, these comparisons have not focused on aerosol forcing (change in net radiative flux at the top of the atmosphere). Here we report results of a project involving 12 groups using 15 models to examine radiative forcing by sulfate aerosol for a wide range of values of particle radius, aerosol optical depth, surface albedo, and solar zenith angle. Among the models that were employed were high and low spectral resolution models incorporating a variety of radiative transfer approximations as well as a line-by-line model. The normalized forcings (forcing per sulfate column burden) obtained with the several radiative transfer models were examined, and the discrepancies were characterized. All models simulate forcings of comparable amplitude and exhibit a similar dependence on input parameters. As expected for a non-light-absorbing aerosol, forcings were negative (cooling influence) except at high surface albedo combined with small solar zenith angle. The relative standard deviation of the zenith-angle-averaged normalized broadband forcing for 15 models-was 8% for particle radius near the maximum in this forcing (approx. 0.2 microns) and at low surface albedo. Somewhat greater model-to-model discrepancies were exhibited at specific solar zenith angles. Still greater discrepancies were exhibited at small particle radii and much greater discrepancies were exhibited at high surface albedos, at which the forcing changes sign; in these situations, however, the normalized forcing is quite small quite small. Discrepancies among the models arise from inaccuracies in Mie calculations, differing treatment of the angular scattering phase function, differing wavelength and angular resolution, and differing treatment of multiple scattering. These results imply the need for standardized radiative transfer methods tailored to the direct aerosol forcing problem. However, the relatively small spread in these results suggests that the uncertainty in forcing arising from the treatment of radiative forcing of a well-characterized aerosol at well-specified surface albedo is smaller than some of the other sources of uncertainty in estimates of direct forcing by anthropogenic sulfate aerosols and anthropogenic aerosols generally.

Boucher, O.↗
NASA NTRS1999

Maximizing Science Return: A Representative Trajectory for Dynamo

This presentation discusses a possible Dynamo Orbit for a future Mars global surveyor. The goal of the proposed orbit is to allow for the greatest amount of mapping of the Martian surface during the mission. The presentation discusses the dynamic pressure, periapsis altitude, the Apoapsis Altitude, the aerodynamic heating rate,and the change in velocity during the aerobraking phase of the orbit and the orbital insertion.

Lyons, Daniel T.↗
NASA NTRS2001

Contracting Officer Technical Representative Briefing

This viewgraph presentation gives an overview of the Agency Occupational Health Program, including details on organizational and personnel changes, medical program standardization, programmatic status, policies, standards, and guides and resources, industrial hygiene and radiological health, assessment schedule and methodology, upcoming events, and the future of the program.

Gettleman, Alan↗
NASA NTRS1995

Task Analytic Models to Guide Analysis and Design: Use of the Operator Function Model to Represent Pilot-Autoflight System Mode Problems

Task-analytic models structure essential information about operator interaction with complex systems, in this case pilot interaction with the autoflight system. Such models serve two purposes: (1) they allow researchers and practitioners to understand pilots' actions; and (2) they provide a compact, computational representation needed to design 'intelligent' aids, e.g., displays, assistants, and training systems. This paper demonstrates the use of the operator function model to trace the process of mode engagements while a pilot is controlling an aircraft via the, autoflight system. The operator function model is a normative and nondeterministic model of how a well-trained, well-motivated operator manages multiple concurrent activities for effective real-time control. For each function, the model links the pilot's actions with the required information. Using the operator function model, this paper describes several mode engagement scenarios. These scenarios were observed and documented during a field study that focused on mode engagements and mode transitions during normal line operations. Data including time, ATC clearances, altitude, system states, and active modes and sub-modes, engagement of modes, were recorded during sixty-six flights. Using these data, seven prototypical mode engagement scenarios were extracted. One scenario details the decision of the crew to disengage a fully automatic mode in favor of a semi-automatic mode, and the consequences of this action. Another describes a mode error involving updating aircraft speed following the engagement of a speed submode. Other scenarios detail mode confusion at various phases of the flight. This analysis uses the operator function model to identify three aspects of mode engagement: (1) the progress of pilot-aircraft-autoflight system interaction; (2) control/display information required to perform mode management activities; and (3) the potential cause(s) of mode confusion. The goal of this paper is twofold: (1) to demonstrate the use of the operator functio model methodology to describe pilot-system interaction while engaging modes And monitoring the system, and (2) to initiate a discussion of how task-analytic models might inform design processes. While the operator function model is only one type of task-analytic representation, the hypothesis of this paper is that some type of task analytic structure is a prerequisite for the design of effective human-automation interaction.

Degani, Asaf↗
NASA NTRS2003

Task IV: Development of Circumferential Inlet Distortion through a Representative Eleven Stage High-speed Axial Compressor

The concepts and the procedure developed in Task I and Task III were used to determine the response of an eleven-stage high-speed compressor to an inlet distortion of 180 deg. circumferential extent for contrasting against its performance under uniform inlet flow. Using the computed results at the inlet to and outlet of the compressor, the computed total pressure ratio and efficiency for the clean condition are determined to be 14.22 and 76.9 percent respectively. As for the distorted case, these are determined to be 10.35 and 71.8 percent respectively, showing deterioration 76.9 percent vs 71.8 percent). The physical consistency of the computed flow field was assessed as a means of demonstrating the applicability and utility of the body force representation for inlet distortion computations. Specifically the computed evolution of the distorted pattern in static pressure and total pressure from compressor inlet to exit is examined. For the eleven-stage compressor examined here, the deterioration in performance has been found to be particularly severe in the last 2 stages. This suggests that the last two stages could be redesigned to alleviate the observed deterioration thus making the compressor performance insensitive to circumferential inlet distortion. This can potentially be accomplished by first determining what should the body force distribution of the last two stages should be to achieve minimal or no deterioration in performance in the last two stages. One can then in principle proceed to determine the blade design to yield such a body force distribution.

Tan, Choon-Sooi↗
NASA NTRS2003

Using Satellite-derived Ice Concentration to Represent Antarctic Coastal Polynyas in Ocean Climate Models

The focus of this paper is on the representation of Antarctic coastal polynyas in global ice-ocean general circulation models (OGCMs), in particular their local, regional, and high-frequency behavior. This is verified with the aid of daily ice concentration derived from satellite passive microwave data using the NASATeam 2 (NT2) and the bootstrap (BS) algorithms. Large systematic regional and temporal discrepancies arise, some of which are related to the type of convection parameterization used in the model. An attempt is made to improve the fresh-water flux associated with melting and freezing in Antarctic coastal polynyas by ingesting (assimilating) satellite ice concentration where it comes to determining the thermodynamics of the open-water fraction of a model grid cell. Since the NT2 coastal open-water fraction (polynyas) tends to be less extensive than the simulated one in the decisive season and region, assimilating NT2 coastal ice concentration yields overall reduced net freezing rates, smaller formation rates of Antarctic Bottom Water, and a stronger southward flow of North Atlantic Deep Water across 30 S. Enhanced net freezing rates occur regionally when NT2 coastal ice concentration is assimilated, concomitant with a more realistic ice thickness distribution and accumulation of High-Salinity Shelf Water. Assimilating BS rather than NT2 coastal ice concentration, the differences to the non-assimilated simulation are generally smaller and of opposite sign. This suggests that the model reproduces coastal ice concentration in closer agreement with the BS data than with the NT2 data, while more realistic features emerge when NT2 data are assimilated.

Stoessel, Achim↗
NASA NTRS2004

Classifying Terrestrial Volcanic Alteration Processes and Defining Alteration Processes they Represent on Mars

Characterizing alteration of the rocks on Mars is difficult, but some guidelines can be made through comparison with terrestrial volcanic alteration. Subaerial volcanic activity on the Hawaiian islands and subglacial volcanic activity on Iceland have led to the formation of a variety of silicate and iron oxide-rich alteration products that may serve as models for chemical alteration on Mars. Multiple samples have been collected from palagonitized tuffs, altered pillow lavas, altered tephra, and S-rich vents for study in the lab. Variations in the kinds of alteration products have been observed depending on the sample environment. We are defining associations between the alteration products and formation conditions that can be used to provide information about environmental conditions on Mars. In particular, we are providing definitions for palagonitic, pedogenic and solfataric alteration that can be used to characterize these alteration processes.

Bishop, J. L.↗
NASA NTRS2001

Signature lipids and stable carbon isotope analyses of Octopus Spring hyperthermophilic communities compared with those of Aquificales representatives

The molecular and isotopic compositions of lipid biomarkers of cultured Aquificales genera have been used to study the community and trophic structure of the hyperthermophilic pink streamers and vent biofilm from Octopus Spring. Thermocrinis ruber, Thermocrinis sp. strain HI 11/12, Hydrogenobacter thermophilus TK-6, Aquifex pyrophilus, and Aquifex aeolicus all contained glycerol-ether phospholipids as well as acyl glycerides. The n-C(20:1) and cy-C(21) fatty acids dominated all of the Aquificales, while the alkyl glycerol ethers were mainly C(18:0). These Aquificales biomarkers were major constituents of the lipid extracts of two Octopus Spring samples, a biofilm associated with the siliceous vent walls, and the well-known pink streamer community (PSC). Both the biofilm and the PSC contained mono- and dialkyl glycerol ethers in which C(18) and C(20) alkyl groups were prevalent. Phospholipid fatty acids included both the Aquificales n-C(20:1) and cy-C(21), plus a series of iso-branched fatty acids (i-C(15:0) to i-C(21:0)), indicating an additional bacterial component. Biomass and lipids from the PSC were depleted in (13)C relative to source water CO(2) by 10.9 and 17.2 per thousand, respectively. The C(20-21) fatty acids of the PSC were less depleted than the iso-branched fatty acids, 18.4 and 22.6 per thousand, respectively. The biomass of T. ruber grown on CO(2) was depleted in (13)C by only 3.3 per thousand relative to C source. In contrast, biomass was depleted by 19.7 per thousand when formate was the C source. Independent of carbon source, T. ruber lipids were heavier than biomass (+1.3 per thousand). The depletion in the C(20-21) fatty acids from the PSC indicates that Thermocrinis biomass must be similarly depleted and too light to be explained by growth on CO(2). Accordingly, Thermocrinis in the PSC is likely to have utilized formate, presumably generated in the spring source region.

Carbon Isotopes/analysis↗
NASA NTRS2000

The timing of the human circadian clock is accurately represented by the core body temperature rhythm following phase shifts to a three-cycle light stimulus near the critical zone

A double-stimulus experiment was conducted to evaluate the phase of the underlying circadian clock following light-induced phase shifts of the human circadian system. Circadian phase was assayed by constant routine from the rhythm in core body temperature before and after a three-cycle bright-light stimulus applied near the estimated minimum of the core body temperature rhythm. An identical, consecutive three-cycle light stimulus was then applied, and phase was reassessed. Phase shifts to these consecutive stimuli were no different from those obtained in a previous study following light stimuli applied under steady-state conditions over a range of circadian phases similar to those at which the consecutive stimuli were applied. These data suggest that circadian phase shifts of the core body temperature rhythm in response to a three-cycle stimulus occur within 24 h following the end of the 3-day light stimulus and that this poststimulus temperature rhythm accurately reflects the timing of the underlying circadian clock.

Non-NASA Center↗
NASA NTRS1993

Sequence and structural implications of a bovine corneal keratan sulfate proteoglycan core protein. Protein 37B represents bovine lumican and proteins 37A and 25 are unique

Amino acid sequence from tryptic peptides of three different bovine corneal keratan sulfate proteoglycan (KSPG) core proteins (designated 37A, 37B, and 25) showed similarities to the sequence of a chicken KSPG core protein lumican. Bovine lumican cDNA was isolated from a bovine corneal expression library by screening with chicken lumican cDNA. The bovine cDNA codes for a 342-amino acid protein, M(r) 38,712, containing amino acid sequences identified in the 37B KSPG core protein. The bovine lumican is 68% identical to chicken lumican, with an 83% identity excluding the N-terminal 40 amino acids. Location of 6 cysteine and 4 consensus N-glycosylation sites in the bovine sequence were identical to those in chicken lumican. Bovine lumican had about 50% identity to bovine fibromodulin and 20% identity to bovine decorin and biglycan. About two-thirds of the lumican protein consists of a series of 10 amino acid leucine-rich repeats that occur in regions of calculated high beta-hydrophobic moment, suggesting that the leucine-rich repeats contribute to beta-sheet formation in these proteins. Sequences obtained from 37A and 25 core proteins were absent in bovine lumican, thus predicting a unique primary structure and separate mRNA for each of the three bovine KSPG core proteins.

NASA Discipline Cell Biology↗
NASA NTRS1955

Transonic Zero-Lift Drag Tests of Four Equivalent-Body-of-Revolution Models Representing Variations of the Convair F-102 Airplane

Four 0.01643-scale equivalent-body-of-revolution models, designed to aid in the evaluation of the relative merits of various degrees of redesign of the existing (1955) Convair F-102 airplane, were launched from the helium gun at Wallops Island, Va., to determine their zero-lift drag at Mach numbers from 0.8 to 1.3. The data are presented with only sufficient analysis to validate their general subsonic level. Estimated values of the friction drag are presented at all Mach numbers to allow a comparison of the pressure drag values alone.

Stoney, William E., Jr.↗
NASA NTRS1998

Representing Spacecraft Mission Planning Knowledge in ASPEN

Deep Space One (DS1) will be the first spaceraft to be controlled by an autonomous closed loop system potientially capable of carrying out a complete mission with minimal commanding from Earth.

onboard planner Deep Space One DS1 autonomous spac↗
NASA NTRS1998

Representing Solar Active Regions with Triangulations

The solar chromosphere consists of three classes which contribute differently to ultraviolet radiation reaching the earth. We describe a data set of solar images, means of segmenting the images into the constituent classes, and novel high-level representation for compact objects based on a triangulation spatial 'membership function'.

Triangulation chromosphere Markov chain Monte Carl↗