Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanner”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

A study of techniques for processing multispectral scanner data

A linear decision rule to reduce the time required for processing multispectral scanner data is developed. Test results are presented which justify the use of the new rule for digital processing whenever both accuracy and processing time are important. A method of evaluating the performance of the rule is also developed and applied to the problem of choosing a subset of channels. A technique used to find linear combinations of channels is described. The ability to extend signatures throughout a small area of approximately fifty square miles is tested. After preprocessing, signatures derived from the first of seven overlapping data sets are applied to all data sets. The test results show that the average probability of misclassification tends to increase with an increase in the number of data sets over which the signatures are extended.

Crane, R. B.↗

Engineering evaluation of 24 channel multispectral scanner

The results of flight tests to evaluate the performance of the 24 channel multispectral scanner are reported. The flight plan and test site are described along with the time response and channel registration. The gain and offset drift, and moire patterns are discussed. Aerial photographs of the test site are included.

Lambeck, P. F.↗

Emission and reflection from healthy and stressed natural targets with computer analysis of spectroradiometric and multispectral scanner data

Special emphasis was on corn plants, and the healthy targets were differentiated from stressed ones by remote sensing. Infrared radiometry of plants is reviewed thoroughly with emphasis on agricultural crops. Theory and error analysis of the determination of emittance of a natural target by radiometer is discussed. Experiments were conducted on corn (Zea mays L.) plants with long wavelength spectroradiometer under field conditions. Analysis of multispectral scanner data of ten selected flightlines of Corn Blight Watch Experiment of 1972 indicated: (1) There was no regular pattern of the mean response of the higher level/levels blighted corn vs. lower level/levels blighted corn in any of the spectral channels. (2) The greater the difference between the blight levels, the more statistically separable they usually were in subsets of one, two, three and four spectral channels.

Kumar, R.↗

Development of a long wavelength spectrometer for the 24-channel multispectral scanner: Instructions for installation, start-up, and adjustment

The basic information is presented, which is required for start-up and operation of two long-wavelength focal-plane and cooler assemblies, including the amplifiers and temperature control systems. The focal plane systems, referred to as the long wavelength spectrometer (LWS) were developed for direct replacement of Arrays 3 and 4 into the multispectral scanner presently being operated by the NASA Manned Spacecraft Center Facility, and Laboratory Support Branch. The equipment is comprised of two major sub-assemblies: Array 3 with three indium antimonide detector channels and Array 4 with seven mercury doped Germanium detector channels. Each array is mounted on a cryogenic cooler and includes the vacuum housings, mounting hardware (x, y, z translation and rotation stages) and detector signal conditioning, temperature control and monitoring electronics. The two arrays were designed to operate independently and do not share common equipment (viz power supplies, housings, mounts, etc.).

Source record↗

Investigation of vibrations of working elements of a two coordinate scanner

Radial and axial vibration measurements on the scanning disk and the data storage board of an optical-mechanical scanner are evaluated. Statistical processing of the observational data establishes the excitation source and determines the effect of disk torsional vibrations on the data storage board.

Kumpikas, K. L.↗

Star scanner

A star scanner on a spin stabilized spacecraft is described which includes a reticle with a pair of slits having different separations as a function of the spacecraft vertical plane, to form a V slit. The time between a star image crossing one of the slits relative to a reference telemetry time provides an indication of azimuth angle. The time between the image crossing the two slits provides an indication of elevation angle of the star. If a star cluster is detected such that two stars pass the slits in less time than normally required for a single star to cross the two slits, an indication of the cluster occurrence is derived. Means are provided to prevent effective detection of large celestial bodies, such as the sun or moon.

Gutshall, R. L.↗

A system to geometrically rectify and map airborne scanner imagery and to estimate ground area

A system of computer programs were developed which performs geometric rectification and line-by-line mapping of airborne multispectral scanner data to ground coordinates and estimates ground area. The system requires aircraft attitude and positional information furnished by ancillary aircraft equipment, as well as ground control points. The geometric correction and mapping procedure locates the scan lines, or the pixels on each line, in terms of map grid coordinates. The area estimation procedure gives ground area for each pixel or for a predesignated parcel specified in map grid coordinates. The results of exercising the system with simulated data showed the uncorrected video and corrected imagery and produced area estimates accurate to better than 99.7%.

Spencer, M. M.↗

Moire patterns and two-dimensional aliasing in line scanner data acquisition systems

The basic mechanism underlying the generation of Moire patterns in line scanner data acquisition systems is examined. A general expression is developed in terms of typical system parameters for the reproduced image of such systems and the interaction of the image spectrum; the raster frequency and digital sampling frequency of the A/D conversion process are discussed and examples given. System design requirements for avoiding Moire pattern generation and two-dimensional aliasing are discussed.

Mcgillem, C. D.↗

Adaptive on-line classification of multi-spectral scanner data

A possible solution to the analysis of the massive amounts of multi-spectral scanner data from the Earth Resource Technical Satellite (ERTS) program is proposed. This solution is offered as an adaptive on-line classification scheme. The classifier is described as well as its controller which is based on ground truth data. Cluster analysis is presented as an alternative approach to the ground truth data. Adaptive feature selection is discussed and possible mini-computer implementations are offered.

Fromm, F. R.↗

Signature estimation from satellite multispectral scanner data

A method for estimating signatures from satellite multispectral scanner data for areas containing mixtures of specified object classes is presented and evaluated. Each signature is assumed to be a Gaussian distribution. The estimation procedure is simple, and the estimates represent maximum likelihood estimates. Formulae to compute variances for an estimated signature are also given.

Crane, R. B.↗

Recent processed results from the Skylab S-192 multispectral scanner

Some early results are presented of attempts to map rock types on the basis of digital tape data from the Skylab S-192 multispectral scanner. The area selected is White Sands, New Mexico. The data has been collected on the SL-2 mission on June 20, 1973. An enlargement of a portion of an S-190A color photograph collected on Skylab Track 20 is considered. Spectral pattern recognition techniques, implemented on an IBM 7094 computer, were used to process the S-192 data. Processing procedures performed in a preparation of the data before the application of pattern recognition are briefly discussed. The analysis rock type spectra yielded 24 promising spectral channel ratio features for separating the rock types. It is concluded that the S-192 sensor data have great potential for lithologic mapping.

Thomson, F. J.↗

Multispectral scanner data applications evaluation. Volume 1: User applications study

A six-month systems study of earth resource surveys from satellites was conducted and is reported. SKYLAB S-192 multispectral scanner (MSS) data were used as a baseline to aid in evaluating the characteristics of future systems using satellite MSS sensors. The study took the viewpoint that overall system (sensor and processing) characteristics and parameter values should be determined largely by user requirements for automatic information extraction performance in quasi-operational earth resources surveys, the other major factor being hardware limitations imposed by state-of-the-art technology and cost. The objective was to use actual aircraft and spacecraft MSS data to outline parametrically the trade-offs between user performance requirements and hardware performance and limitations so as to allow subsequent evaluation of compromises which must be made in deciding what system(s) to build.

Thomson, F. J.↗

Multispectral scanner data applications evaluation. Volume 2: Sensor system study

The optimization of a thematic mapper for earth resources application is discussed in terms of cost versus performance. Performance tradeoffs and the cost impact are analyzed. The instrument design and radiometric performance are also described. The feasibility of a radiative cooler design for a scanning spectral radiometer is evaluated along with the charge coupled multiplex operation. Criteria for balancing the cost and complexity of data acquisition instruments against the requirements of the user, and a pushbroom scanner version of the thematic mapper are presented.

Source record↗

Estimating proportions of objects from multispectral scanner data

Progress is reported in developing and testing methods of estimating, from multispectral scanner data, proportions of target classes in a scene when there are a significiant number of boundary pixels. Procedures were developed to exploit: (1) prior information concerning the number of object classes normally occurring in a pixel, and (2) spectral information extracted from signals of adjoining pixels. Two algorithms, LIMMIX and nine-point mixtures, are described along with supporting processing techniques. An important by-product of the procedures, in contrast to the previous method, is that they are often appropriate when the number of spectral bands is small. Preliminary tests on LANDSAT data sets, where target classes were (1) lakes and ponds, and (2) agricultural crops were encouraging.

Horwitz, H. M.↗

Geometric analysis and restitution of digital multispectral scanner data arrays

An investigation was conducted to define causes of geometric defects within digital multispectral scanner (MSS) data arrays, to analyze the resulting geometric errors, and to investigate restitution methods to correct or reduce these errors. Geometric transformation relationships for scanned data, from which collinearity equations may be derived, served as the basis of parametric methods of analysis and restitution of MSS digital data arrays. The linearization of these collinearity equations is presented. Algorithms considered for use in analysis and restitution included the MSS collinearity equations, piecewise polynomials based on linearized collinearity equations, and nonparametric algorithms. A proposed system for geometric analysis and restitution of MSS digital data arrays was used to evaluate these algorithms, utilizing actual MSS data arrays. It was shown that collinearity equations and nonparametric algorithms both yield acceptable results, but nonparametric algorithms possess definite advantages in computational efficiency. Piecewise polynomials were found to yield inferior results.

Baker, J. R.↗