Search NASA⌕ Search

SEARCH · Search NASA

Results for “seismic waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

216 records · Page 12

Preliminary analysis of measured sound propagation over various seasonal snow covers

Measurements of acoustic pulse propagation in the 5 to 500-Hz frequency band were conducted under various snow cover conditions during the 1989 to 1990 winter in New Hampshire. The objective was to determine the effect of snow cover thickness and other snow properties on the absorption of acoustic pulses. Blank pistol shots were used as the source of the acoustic waves, and geophones and microphones in an 80 m-long linear array served as receivers. Snow thicknesses ranged from 0.05 to 0.35 m, and densities varied from 100 to 350 kg m(sup -3) during the 10 separate measurement days. Preliminary analysis indicates that the peak pulse amplitude decayed in proportion to approx. gamma (sup -1.7) for most conditions and that the acoustic-to-seismic ratios varied from about 4 to 15 x 10(exp -6) m s(sup -1) Pa(sup -1). Theoretical waveforms were calculated for propagation in a homogeneous atmosphere using Attenborough's model of ground impedance. An automatic fitting procedure for the normalized experimental and theoretical waveforms was used to determine the effective flow resistivity of the snow covers, and gave values of 10 to 35 kN s m(sup -4), in agreement with earlier results.

Albert, Donald G.↗

Velocity structure and evolution of the moon

Seismic data from the Apollo Passive Seismic Network stations are analyzed to determine the velocity structure and to infer the composition and physical properties of the lunar interior. Data from artificial impacts (SIBV booster and LM-ascent stage) cover a distance range of 9 to 1750 km. Travel times and amplitudes, as well as theoretical seismograms, are used to derive a velocity model for the outer 150 km of the moon. The P-wave velocity model confirms an earlier report of a lunar crust in the eastern part of Oceanus Procellarum. The crust is about 60 km thick and may consist of two layers in the mare regions. Possible values for the P-wave velocity in the uppermost mantle are between 7.6 and 9.0 km/sec. The 9 km/sec velocity represents either a localized heterogeneous unit, or a thin layer less than about 40 km in thickness. The elastic properties of the deep interior, as inferred from the seismograms of natural events (meteoroid impacts and moonquakes) occurring at great distances, indicate that there is an increase in attenuation and a possible decrease of velocity at depths below about 1000 km.

Toksoz, M. N.↗

Physical state of the western U.S. upper mantle

Using observed P wave images of the western U.S. upper mantle, which show lateral variations of up to 8%, and existing scaling relations, we infer that the low-velocity mantle is hot and partially molten to depths of 100-200 km, and that the high-velocity upper mantle is subsolidus. Most the high-velocity upper mantle within a few hundred kilometers of the coastline appears to be relatively dense, suggesting that it is relatively cool (i.e., a thermal lithosphere). This is expected for features associated with the subducting Juan de Fuca and Gorda slabs, and the high velocity upper mantle beneath the Transverse Ranges has been attributed to the sinking of negatively buoyant mantle lithosphere. Other high-velocity mantle structures near the continental margin are consistent with this interpretation. In contrast, the generally high elevations of the continental interior imply a buoyant upper mantle there, an inference that holds for both the high- and the low-velocity upper mantle. The only resonable way to produce the high-velocity low-density upper mantle is through basalt depletion, thereby creating mantle of increased solidus temperature and decreased density. We distinguish a marginal domain, within approximately 250 km of the Pacific coast, from an interior domain. This is based on the inferred upper mantle compositional difference and regional associations: beneath the marginal domain, upper mantle structures trend parallel to the surface physiography and young tectonic structures, whereas upper mantle structures beneath the continental interior trend northeasterly. This northeast orientation is discordant with the young tectonic structures, but aligns with young volcanic activity. The high lateral gradients in observed upper mantle seismic structure found throughout the western United States imply high lateral gradients in the associated temperature or partial melt fields. Because these fields diffuse on time scales of less than a few tens of millions of years, the imaged upper mantle structure is young. The following upper mantle processes are hypothesized to account for these findings and inferences. Away from the plate margin, small-scale upper mantle convection driven by partial melt-induced buoyancy of hot upper mantle leads to the production and segregation of melt and the creation of compositional variations. The heterogeneous upper mantle P wave structure of the elevated continental interior is largely a consequence of partial melt variations that are modulated by the compositional variations, and throughout this region we infer high temperatures and low densities. Near the plate margin, relative plate motions force upper mantle flow, although upper mantle flow driven by the positive buoyancy of melt and the negative bouyancy lithosphere is important locally.

Humphreys, Eugene D.↗

Deep Moonquake Focal Mechanisms: Recovery and Implications

A defining characteristic of deep moonquakes is their tendency to occur with tidal periodicity, prompting previous studies to infer that they are related to the buildup and release of tidal stress within the Moon. In studies of tidal forcing, a key constraint is the focal mechanism: the fault parameters describing the type of failure moonquakes represent. The quality of the lunar seismic data and the limited source/receiver geometries of the Apollo seismic network prohibit the determination of deep moonquake fault parameters using first-motion polarities, as is typically done in terrestrial seismology. Without being able to resolve tidal stress onto a known failure plane, we can examine only gross qualities of the tidal stress tensor with respect to moonquake occurrence, so we cannot fully address the role of tidal stress in moonquake generation. We will examine the extent to which shear (S) and compression (P) wave amplitude ratios can constrain moonquake fault geometry by determining whether, for a given cluster, there exists a focal mechanism that can produce a radiation pattern consistent with the amplitudes measured by the Apollo instruments. Amplitudes are read in the ray coordinate frame, directly from seismograms for which the P and S arrivals are clearly identifiable on all long-period channels of the four Apollo stations. We apply an empirical station correction to account for site effects and the differences between P- and S-wave attenuation. Instead of focusing on the best fitting solution only, we formulate the inverse problem using a falsification criterion: all source orientations that do not reproduce the observed SV/P ratios within an error margin derived from the uncertainty of amplitude readings are rejected. All others are accepted as possible solutions. The inversion is carried out using an exhaustive grid search on a regular grid with predefined step size, encompassing all possible combinations of strike, dip and slip. To assess the sensitivity of the inversion for the uncertainty of the lunar interior structure, we carry out repeated inversions with different velocity structures. Our data set consist of a total of 106 events from 25 deep moonquake clusters. The largest contribution of 37 events originates from the most active cluster, A001, while other clusters are represented by 1 to 9 events. Since the definition of a cluster implies that all events share the same source orientation, a comparison of the inversion results of all events from one cluster will reduce ambiguities of the inversion. Once we obtain a suite of fault parameters for a given source, we can attempt to further constrain the focal mechanism with refined analyses of tidal stresses and predictions based on synthetic seismograms.

Knapmeyer, Martin↗

The Effect of Sonic Booms on Earthquake Warning Systems

Several aerospace companies are designing quiet supersonic business jets for service over the United States. These aircraft have the potential to increase the occurrence of mild sonic booms across the country. This leads to interest among earthquake warning (EQW) developers and the general seismological community in characterizing the effect of sonic booms on seismic sensors in the field, their potential impact on EQW systems, and means of discriminating their signatures from those of earthquakes. The SonicBREWS project (Sonic Boom Resistant Earthquake Warning Systems) is a collaborative effort between Seismic Warning Systems, Inc. (SWS) and NASA Dryden Flight Research Center. This project aims to evaluate the effects of sonic booms on EQW sensors. The study consists of exposing high-sample-rate (1000 sps) triaxial accelerometers to sonic booms with overpressures ranging from 10 to 600 Pa in the free field and the built environment. The accelerometers record the coupling of the sonic boom to the ground and surrounding structures, while microphones record the acoustic wave above ground near the sensor. Sonic booms are broadband signals with more high-frequency content than earthquakes. Even a 1000 sps accelerometer will produce a significantly aliased record. Thus the observed peak ground velocity is strongly dependent on the sampling rate, and increases as the sampling rate is reduced. At 1000 sps we observe ground velocities that exceed those of P-waves from M L 3 earthquakes at local distances, suggesting that sonic booms are not negligible for EQW applications. We present the results of several experiments conducted under SonicBREWS showing the effects of typical-case low amplitude sonic booms and worst-case high amplitude booms. We show the effects of various sensor placements and sensor array geometries. Finally, we suggest possible avenues for discriminating sonic booms from earthquakes for the purposes of EQW.

Wurman, Gilead↗

Shock wave equation of state of serpentine to 150 GPa - Implications for the occurrence of water in the earth's lower mantle

The shock wave equation of state of Mg end-member serpentine was determined to 150 GPa by examining the shock properties of three polycrystalline serpentines: (1) a lizardite serpentine found near Globe (Arizona), (2) an antigorite serpentine from Thurman (New York), and (3) a chrysotile serpentine from Quebec (Canada). The shock wave experiments were carried out using either a two-stage light gas gun or a 40-mm bore propellant. The shock equation of state that was obtained is shown to exhibit four distinct regions: a low-pressure phase, a mixed phase region, a high-pressure phase, and a very high-pressure phase. The high-pressure density and sound speed of an H2O-rich magnesium silicate determined from these experiments indicate that the observed seismic properties of the lower mantle allow the existence of several weight percent of water in the lower mantle.

Tyburczy, James A.↗

Space Based Gravitational Wave Astronomy Beyond LISA

The Laser Interferometer Space Antenna (LISA) will open three decades of gravitational wave(GW) spectrum between 0.1 and 100 mHz, the mHz band [1]. This band is expected to be the richest part of the GW spectrum, in types of sources, numbers of sources, signal-to-noise ratios and discovery potential. When LISA opens the low-frequency window of the gravitational wave spectrum,around 2034, the surge of gravitational-wave astronomy will strongly compel a subsequent mission to further explore the frequency bands of the GW spectrum that can only be accessed from space. The 2020's is the time to start developing technology and studying mission concepts for a large-scale mission to be launched in the 2040's. The mission concept would then be proposed to Astro2030. Only space-based missions can access the GW spectrum between 108 and 1 Hz because of the Earth's seismic noise. This white paper surveys the science in this band and mission concepts that could accomplish that science. The proposed small scale activity is a technology development program that would support a range of concepts and a mission concept study to choose a specific mission concept for Astro2030. In this white paper, we will refer to a generic GW mission beyond LISA as bLISA.

Baker, John↗

Possible Space-Based Gravitational-Wave Observatory Mission Concept

The existence of gravitational waves was established by the discovery of the Binary Pulsar PSR 1913+16 by Hulse and Taylor in 1974, for which they were awarded the 1983 Nobel Prize. However, it is the exploitation of these gravitational waves for the extraction of the astrophysical parameters of the sources that will open the first new astronomical window since the development of gamma ray telescopes in the 1970's and enable a new era of discovery and understanding of the Universe. Direct detection is expected in at least two frequency bands from the ground before the end of the decade with Advanced LIGO and Pulsar Timing Arrays. However, many of the most exciting sources will be continuously observable in the band from 0.1-100 mHz, accessible only from space due to seismic noise and gravity gradients in that band that disturb groundbased observatories. This talk will discuss a possible mission concept developed from the original Laser Interferometer Space Antenna (LISA) reference mission but updated to reduce risk and cost.

Livas, Jeffrey C.↗

The shock wave equation of state of brucite Mg(OH)2

New shock equation of state (EOS) data on magnesium hydroxide between 12 and 60 GPa is presented. It is found that the brucite EOS data between 12 and 97 GPa can be fit with a single linear U(s) - u(p) relationship: U(s) = 4.76(0.11) + 1.35(0.05)u(p). The third order Birch-Murnaghan equation parameters are K(os) = 51 + or - 4 GPa and K(os)prime = 5.0 + or - 0.4. The first partial release states measured for brucite Mg(OH)2 are reported. Calculated phase boundaries using the EOS data are found to be consistent with the experimental data and indicate that brucite is unlikely to be stable under lower mantle conditions. At high pressure, bulk sound velocities calculated for MgO and Mg(OH)2 are very similar, indicating that the presence of hydrous assemblages in the lower mantle may not produce anomalous bulk seismic velocities. A comparison of densities in brucite and other high-pressure phases under mantle conditions shows that the water content of the lower mantle is between 0 and 3 wt pct.

Duffy, Thomas S.↗

Lunar Gravitational-wave Detection

Lunar gravitational-wave (GW) detection has been under consideration since Apollo 17 when the Lunar Surface Gravimeter developed under the coordination of Joseph Weber was deployed on the Moon with the goal to observe lunar surface vibrations generated by passing GWs [1]. The experiment did not run with its targeted performance, but even if it had, we know today that it would not have been sensitive enough to detect GW signals. Vibrations caused by GWs are expected to be several orders of magnitude weaker than what the instrument was designed to observe. The main motivation to bring such an experiment to the Moon was that with the extremely low level of seismicity observed with previously deployed Apollo seismometers [2] (see figure 1), Weber suspected that GW signals could be detected.

Jan Harms↗

Waveform effects of a metastable olivine tongue in subducting slabs

Velocity models of subducting slabs with a kinetically-depressed olivine to beta- and gamma-spinel transition are constructed, and the effect that such structures would have on teleseismic P waveforms are examined using a full-wave finite-difference method. These 2D calculations yielded waveforms at a range of distances in the downdip direction. The slab models included a wedge-shaped, low-velocity metastable olivine tongue (MOTO) to a depth of 670 km, as well as a plausible thermal anomaly; one model further included a 10-km-thick fast layer on the surface of the slab. The principal effect of MOTO is to produce grazing reflections at wide angles off the phase boundary, generating a secondary arrival 0 to 4 seconds after the initial arrival depending on the take-off angle. The amplitude and timing of this feature vary with the lateral location of the seismic source within the slab cross-section.

Vidale, John E.↗

Elastic velocity and Q factor measurements on Apollo 12, 14, and 15 rocks.

The Rayleigh wave velocities (vR) in one Apollo 12, one Apollo 15, and two Apollo 14 rocks were measured by the impulse technique. For 14310 vR = 1.20 km/sec; for 14321 vR = 0.9 km/sec; for 12063, on which the orientation dependence was studied, vR = 1.16-1.59 km/sec; for 15555 vR = 0.32 km/sec; and for synthetic rock 10017 analogue vR = 2.26 km/sec. This represents a larger spread by a factor of 3 than previously reported on lunar igneous rock. Absolute Q factor measurements were performed on one Apollo 14 rock by the vibrating bar technique. Under exposure to high vacuum and low temperatures, the Q factor is shown to increase towards values approaching the low end of the range of estimates from seismic data.

Tittmann, B. R.↗

Fault Scarp Detection Beneath Dense Vegetation Cover: Airborne Lidar Mapping of the Seattle Fault Zone, Bainbridge Island, Washington State

The emergence of a commercial airborne laser mapping industry is paying major dividends in an assessment of earthquake hazards in the Puget Lowland of Washington State. Geophysical observations and historical seismicity indicate the presence of active upper-crustal faults in the Puget Lowland, placing the major population centers of Seattle and Tacoma at significant risk. However, until recently the surface trace of these faults had never been identified, neither on the ground nor from remote sensing, due to cover by the dense vegetation of the Pacific Northwest temperate rainforests and extremely thick Pleistocene glacial deposits. A pilot lidar mapping project of Bainbridge Island in the Puget Sound, contracted by the Kitsap Public Utility District (KPUD) and conducted by Airborne Laser Mapping in late 1996, spectacularly revealed geomorphic features associated with fault strands within the Seattle fault zone. The features include a previously unrecognized fault scarp, an uplifted marine wave-cut platform, and tilted sedimentary strata. The United States Geologic Survey (USGS) is now conducting trenching studies across the fault scarp to establish ages, displacements, and recurrence intervals of recent earthquakes on this active fault. The success of this pilot study has inspired the formation of a consortium of federal and local organizations to extend this work to a 2350 square kilometer (580,000 acre) region of the Puget Lowland, covering nearly the entire extent (approx. 85 km) of the Seattle fault. The consortium includes NASA, the USGS, and four local groups consisting of KPUD, Kitsap County, the City of Seattle, and the Puget Sound Regional Council (PSRC). The consortium has selected Terrapoint, a commercial lidar mapping vendor, to acquire the data.

Harding, David J.↗

Equation of state fits to the lower mantle and outer core

The lower mantle and outer core are subjected to tests for homogeneity and adiabaticity. An earth model is used which is based on the inversion of body waves and Q-corrected normal-mode data. Homogeneous regions are found at radii between 5125 and 4825 km, 4600 and 3850 km, and 3200 and 2200 km. The lower mantle and outer core are inhomogeneous on the whole and are only homogeneous in the above local regions. Finite-strain and atomistic equations of state are fit to the homogeneous regions. The apparent convergence of the finite-strain relations is examined to judge their applicability to a given region. In some cases the observed pressure derivatives of the elastic moduli are used as additional constraints. The effect of minor deviations from adiabaticity on the extrapolations is also considered. An ensemble of zero-pressure values of the density and seismic velocities are found for these regions. The range of extrapolated values from these several approaches provides a measure of uncertainties involved.

Butler, R.↗

Regional variations in upper mantle compressional velocities beneath southern California 1. Post-shock temperatures: Their experimental determination, calculation, and implications, 2.

The compressional velocity within the upper mantle beneath Southern California is investigated through observations of the dependence of teleseismic P-delays at all stations of the array on the distance and azimuth to the event. The variation of residuals with azimuth was found to be as large as 1.3 sec at a single station; the delays were stable as a function of time, and no evidence was found for temporal velocity variations related to seismic activity in the area. These delays were used in the construction of models for the upper mantle P-velocity structure to depths of 150 km, both by ray tracing and inversion techniques. The models exhibit considerable lateral heterogeneity including a region of low velocity beneath the Imperial Valley, and regions of increased velocity beneath the Sierra Nevada and much of the Transverse Ranges. The development is described of a technique for the experimental determination of post-shock temperatures, and its application to several metals and silicates shocked to pressures in the range 5 to 30 GPa. The technique utilizes an infra-red radiation detector to determine the brightness temperature of the free surface of the sample after the shock wave has passed through it.

Raikes, S. A.↗

The interpretation of crustal dynamics data in terms of plate motions and regional deformation near plate boundaries

During our participation in the NASA Crustal Dynamics Project under NASA contract NAS-27339 and grant NAG5-814 for the period 1982-1991, we published or submitted for publication 30 research papers and 52 abstracts of presentations at scientific meetings. In addition, five M.I.T. Ph.D. students (Eric Bergman, Steven Bratt, Dan Davis, Jeanne Sauber, Anne Sheehan) were supported wholly or in part by this project during their thesis research. Highlights of our research progress during this period include the following: application of geodetic data to determine rates of strain in the Mojave block and in central California and to clarify the relation of such strain to the San Andreas fault and Pacific-North American plate motions; application of geodetic data to infer post seismic deformation associated with large earthquakes in the Imperial Valley, Hebgen Lake, Argentina, and Chile; determination of the state of stress in oceanic lithosphere from a systematic study of the centroid depths and source mechanisms of oceanic intraplate earthquakes; development of models for the state of stress in young oceanic regions arising from the differential cooling of the lithosphere; determination of the depth extent and rupture characteristics of oceanic transform earthquakes; improved determination of earthquake slip vectors in the Gulf of California, an important data set for the estimation of Pacific-North American plate motions; development of models for the state of stress and mechanics of fold-and-thrust belts and accretionary wedges; development of procedures to invert geoid height, residual bathymetry, and differential body wave travel time residuals for lateral variations in the characteristic temperature and bulk composition of the oceanic upper mantle; and initial GPS measurements of crustal deformation associated with the Imperial-Cerro Prieto fault system in southern California and northern Mexico. Full descriptions of the research conducted on these topics may be found in the Semi-Annual status Reports submitted regularly to NASA over the course of this project and in the publications listed.

Solomon, Sean C.↗

Structure, composition, and properties of lunar crust.

Lunar seismic data from three Apollo seismometers are interpreted to determine the structure of the moon's interior to a depth of about 100 km. The travel times and amplitudes of P and S arrivals from Saturn IV-B and LM impacts are interpreted in terms of a velocity profile. The most outstanding feature of the model is that, in the Fra Mauro region of Oceanus Procellarum, the moon has a 65 km-thick layered crust. Other features of the model are: (1) rapid increase of velocity near the surface due to pressure effects on dry rocks, (2) a discontinuity at a depth of about 25 km, (3) near-constant velocities between 25 and 65 km deep, (4) a major discontinuity at 65 km marking the base of the lunar crust, and (5) very high apparent velocities (about 9 km/sec for P waves) in the lunar mantle below the crust.

Toksoz, M. N.↗

An analysis of nearfield normal mode amplitude anomalies of the Landers earthquake

The 1992 Landers earthquake (M(sub w) = 7.3) occurred in the middle of the TERRAscope network. Long-period Rayleigh waves recorded at the TERRAscope stations (delta less than or = 3 deg) after traveling around the Earth show large amplitude anomalies, one order of magnitude larger than spherical Earth predictions up to a period of about 600 s. The ground motions over the epicentral region at and after the arrival of R4-5 are in phase at all stations. These observations are inconsistent with the nearly vertical strike slip mechanism of the Landers earthquake. Synthetic seismograms for a rotating, elliptic, and laterally heterogeneous Earth model calculated by the variational method agree well with the observed waveforms. Calculations for various 3D Earth models demonstrate that the amplitudes are very sensitive to the large scale aspherical structure in the crust and the mantle. The anomalies for modes shorter than 300 s period can be explained by lateral heterogeneity shallower than the upper mantle. Rotation of the Earth and lower mantle heterogeneity are required to explain mode amplitudes at longer periods. Current whole mantle seismic tomographic models can fully explain the observed amplitudes longer than 300 s. To assess the effect of the high order lateral heterogeneity in the mantle more precise estimate of the crustal correction is required.

Watada, Shingo↗