SEARCH · Search NASA

Results for “shells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1970

Flutter, vibration, and buckling of truncated orthotropic conical shells with generalized elastic edge restraint

A theoretical investigation has been made of the flutter, vibration, and buckling of truncated conical shells with generalized elastic edge restraint. The shell analysis is of the classical Donnell type, in-plane inertias and structural damping are neglected, and the aerodynamic loading is represented by the inviscid two-dimensional quasi-steady approximation. An approximate solution is obtained by the generalized Galerkin method. The accuracy and limitations of the analysis are illustrated by comparing numerical results for buckling an vibration with results of other investigations for various boundary conditions, applied loads, and shell geometries and stiffness. Sufficient numerical results are presented to permit the determination of the flutter condition for simply supported isotropic conical shells for a wide range of cone angle, length-radius ration, and radius-thickness ratio. Results are also presented to indicate some effects of variations in edge restraint, applied loads, and ring or stringer stiffening.

Flutter↗

NASA NTRS2021

Development of a Numerical Modeling Approach for Buckling Analysis of Sandwich Composite Cylindrical Shells with Selected Results

The buckling response of geometrically perfect and imperfect cylindrical sandwich shells can be investigated using nonlinear finite element analyses with two-dimensional general-purpose shell elements. Such analyses are used in the NASA Engineering and Safety Center Shell Buckling Knockdown Factor Project, which has the goal of developing new analysis-based buckling design recommendations for select classes of sandwich composite cylindrical structures under uniaxial compressive load. As such, finite element models of sandwich composite cylinders were developed and analyses were performed to predict the buckling responses of geometrically perfect and imperfect sandwich composite cylinders. The development of the selected finite-element modeling approach for a sandwich composite cylinder is discussed. Buckling-response sensitivity of geometrically imperfect sandwich cylinders for various shell element types were investigated as part of this study. Preliminary results of geometric imperfections influence on buckling response of sandwich cylinders are also presented.

Structural Modeling↗

NASA NTRSDate not supplied

Initial Findings in Full-Shell Active Optics

The realization of active full-shell x-ray optics will provide ground-breaking capability for future missions. Future X-ray missions, such as Lynx, require high angular-resolution, large effective area, and as wide a field of view(FOV) as possible. It is currently not possible to perform high-resolution imaging of both wide and narrow FOVs with a single X-ray telescope. In this paper, we discuss the use of actuators to switch the optical surface of full-shell x-ray optics between prescriptions optimized for narrow-field and wide-field viewing, as well as correct for low-spatial-frequency errors in the optics. Previously, a pathfinder was developed using finite-element modeling(FEM). Using a combination of the model’s influence functions, the capacity of active full-shell optics was shown to switch between prescriptions with 92% accuracy. Another benefit of the analytical pathfinder was its ability to correct low-spatial frequency errors, which comprise a large percentage of the MSFC full-shell x-ray optics root-mean-square (RMS) slope error. In order to verify the pathfinder, a surface-parallel actuator was bonded to a nickel-replicated coupon. After the actuator was bonded to the coupon, the slope of the surface was measured while the actuator was activated. The proof-of-concept demonstrator development, the influence function data, and the resulting implications on the analytical pathfinder are reported and discussed.

X-ray optics↗

NASA NTRS1966

Transonic aerodynamic investigation of tension shell and blunted 100 deg conical shapes for unmanned entry vehicles

An experimental investigation of a spherically blunted 100° cone and two tension shell configurations with varying nose-bluntness ratios for use in unmanned entry into low -density planetary atmospheres has been conducted by the National Aeronautics and Space Administration at Mach numbers from 0.30 to 1.20 and at angles of attack from approximately O° to 40°. The results show that the models were longitudinally stable, with centers of pressure located rearward of the base at all test conditions. The tension shell configurations exhibited substantially higher axial-force coefficients than the 100° cone although the variation of axial-force coefficient with Mach number at zero angle of attack was similar for all configurations. An increase in tension shell body length resulted in a reduction of the axial-force coefficients and a more forward center-of-pressure location. Variation in nose bluntness had no significant effect on the longitudinal aerodynamic characteristics of the tension shell configurations.

TRANSONIC SPEED↗

NASA NTRS1968

Static structural analysis of shell-type structures

Shell analysis manual provides methods for determining static deflections and internal load and stress distributions in shells under various loading conditions, and methods of analyzing static instability of shell structures. Also included are methods for determining the lightest shell wall for various constructions.

Baker, E. H.↗

NASA NTRS1971

Vibration characteristics of Z-ring-stiffened 60 deg conical shell models of a planetary entry spacecraft

An experimental investigation of the vibration characteristics of a 60 deg conical shell model of a planetary entry vehicle is described and the results presented. Model configurations include the shell with or without one or two Z-ring stiffeners and with or without a simulated payload. Tests were conducted with the model clamped at the small diameter and with the model suspended at the simulated payload. Additionally, calculated results obtained from application of several analytical procedures reported in the literature are presented together with comparisons between experimental and calculated frequencies and meridional mode shapes. Generally, very good frequency agreement between experimental and calculated results was obtained for all model configurations. For small values of circumferential mode number, however, the frequency agreement decreased as the number of ring stiffeners increased. Overall agreement between experimental and calculated mode shapes was generally good. The calculated modes usually showed much larger curvatures in the vicinity of the rings than were observed in the experimentally measured mode shapes. Dual resonances associated with modal preference were noted for the shell without Z-ring stiffeners, whereas the addition of stiffeners produced resonances for which the model responded in two or more modes over different sections of the shell length.

Naumann, E. C.↗

NASA NTRS1971

Analysis of transient, linear wave propagation in shells by the finite difference method

The applicability of the finite difference method to propagation problems in shells, and the response of a cylindrical shell with cutouts to both longitudinal and radial transient excitations are investigated. It is found that the only inherent limitation of the finite difference method is its inability to reproduce accurately response discontinuities. The short wave length limitations of thin shell theory create significant convergence difficulties may often be overcome through proper selection of finite difference mesh dimensions and temporal or spatial smoothing of the excitation. Cutouts produce moderate changes in early and intermediate time response of a cylindrical shell to axisymmetric pulse loads applied at one end. The cutouts may facilitate the undesirable late-time transfer of load-injected extensional energy into nonaxisymmetric flexural response.

Geers, T. L.↗

NASA NTRS1972

A computer program for the geometrically nonlinear static and dynamic analysis of arbitrarily loaded shells of revolution, theory and users manual

A digital computer program known as SATANS (static and transient analysis, nonlinear, shells) for the geometrically nonlinear static and dynamic response of arbitrarily loaded shells of revolution is presented. Instructions for the preparation of the input data cards and other information necessary for the operation of the program are described in detail and two sample problems are included. The governing partial differential equations are based upon Sanders' nonlinear thin shell theory for the conditions of small strains and moderately small rotations. The governing equations are reduced to uncoupled sets of four linear, second order, partial differential equations in the meridional and time coordinates by expanding the dependent variables in a Fourier sine or cosine series in the circumferential coordinate and treating the nonlinear modal coupling terms as pseudo loads. The derivatives with respect to the meridional coordinate are approximated by central finite differences, and the displacement accelerations are approximated by the implicit Houbolt backward difference scheme with a constant time interval. The boundaries of the shell may be closed, free, fixed, or elastically restrained. The program is coded in the FORTRAN 4 language and is dimensioned to allow a maximum of 10 arbitrary Fourier harmonics and a maximum product of the total number of meridional stations and the total number of Fourier harmonics of 200. The program requires 155,000 bytes of core storage.

Ball, R. E.↗

NASA NTRS1971

Limit analysis for combined edge and pressure loading on a cylindrical shell.

Equations describing the stress field and velocity field occurring in a circular cylindrical shell at plastic collapse are derived corresponding to stress states lying on each face of a yield surface for a uniform shell of material obeying the Tresca yield condition. They are then applied to the case of a shell under combined axisymmetric loadings (moment, shear force, and axial force) at one end and uniform internal or external pressure on the lateral surface. For a sufficiently long shell, complete solutions are obtained for a fixed far end, and for a certain range of values of axial force and pressure, they are obtained for a free far end. All the solutions are represented by either closed form or by quadratures. It is shown that in many cases the radial velocity field is proportional to the shear force.

Ho, H. S.↗

NASA NTRS1972

A circumferential crack in a cylindrical shell under tension.

A closed cylindrical shell under uniform internal pressure has a slit around a portion of its circumference. Linear shallow shell theory predicts inverse square-root-type singularities in certain of the stresses at the crack tips. This paper reports the computed strength of these singularities for different values of a dimensionless parameter based on crack length, shell radius and shell thickness.

Duncan-Fama, M. E.↗

NASA NTRS1972

Testing techniques and comparisons between theory and test for vibration modes of ring stiffened truncated-cone shells.

Vibration tests were carried out on truncated-cone shells with widely spaced ring stiffeners. The models were excited by an air shaker for LF modes and by small electrodynamic shakers for HF modes. The Novozhilov thin shell theory according to which a ring is an assembly of an arbitrary number of segments, each being a short truncated-cone shell of uniform thickness, is used in the analysis of the results. A mobile, noncontacting, displacement-sensitive sensor system developed by the author was used in the tests. Tests results are given for a free-free 60-deg cone and for a clamped-free 60-deg cone. The tests are characterized as having considerable value for the classification of prevalent multimode responses in shells of this type.

Naumann, E. C.↗

NASA NTRS1972

Fracture of cylindrical and spherical shells containing a crack.

Fatigue and fracture of cylindrical and spherical shells containing a through crack and subjected to internal pressure or torsion are considered. The stress intensity factor ratios giving the effect of curvature are obtained as functions of a dimensionless shell parameter. By using the conventional plastic strip model the plastic zone size around the crack tip and the crack opening displacement are calculated. The calculated COD values are shown to be in good agreement with the experimental results. The fracture criterion of critical COD is verified by using the results of the burst tests in titanium and aluminum alloy cryogenic pressure vessels. Modified fatigue crack propagation models taking into account the bending effect in shells are introduced and are applied to the analysis of experimental data obtained from flat plates, and cylindrical shells under axial tension, internal pressure, and torsion. Finally, the paper includes the effect of humidity on the crack growth rate and the effect of load biaxiality on the rupture strength.

Erdogan, F.↗

NASA NTRS1973

A cylindrical shell model of the NASA-MPE barium ion cloud experiment.

A computer model is developed using infinitely long concentric cylindrical shells to represent the neutral atoms, ions and electrons in the barium cloud. The neutral shells are given a distribution of positions and velocities whose parameters are chosen to be consistent with the dynamics of the release. From this distribution, the ion and electron shells are generated at random using the observed time constant for photoionization. The ion and electron shells thus formed are followed using self-consistent equations of motion. Various averages which could be compared with observation of the actual cloud are calculated at regular time intervals. An unexpected result is the predicted very early return of the magnetic field within the cloud to its ambient value.

Grauer, A. D.↗

NASA NTRS1973

Comparison of finite-difference schemes for analysis of shells of revolution

Several finite difference schemes are applied to the stress and free vibration analysis of homogeneous isotropic and layered orthotropic shells of revolution. The study is based on a form of the Sanders-Budiansky first-approximation linear shell theory modified such that the effects of shear deformation and rotary inertia are included. A Fourier approach is used in which all the shell stress resultants and displacements are expanded in a Fourier series in the circumferential direction, and the governing equations reduce to ordinary differential equations in the meridional direction. While primary attention is given to finite difference schemes used in conjunction with first order differential equation formulation, comparison is made with finite difference schemes used with other formulations. These finite difference discretization models are compared with respect to simplicity of application, convergence characteristics, and computational efficiency. Numerical studies are presented for the effects of variations in shell geometry and lamination parameters on the accuracy and convergence of the solutions obtained by the different finite difference schemes. On the basis of the present study it is shown that the mixed finite difference scheme based on the first order differential equation formulation and two interlacing grids for the different fundamental unknowns combines a number of advantages over other finite difference schemes previously reported in the literature.

Noor, A. K.↗

NASA NTRS1974

The use of COD and plastic instability in crack propagation and arrest in shells

The initiation, growth, and possible arrest of fracture in cylindrical shells containing initial defects are dealt with. For those defects which may be approximated by a part-through semi-elliptic surface crack which is sufficiently shallow so that part of the net ligament in the plane of the crack is still elastic, the existing flat plate solution is modified to take into account the shell curvature effect as well as the effect of the thickness and the small scale plastic deformations. The problem of large defects is then considered under the assumptions that the defect may be approximated by a relatively deep meridional part-through surface crack and the net ligament through the shell wall is fully yielded. The results given are based on an 8th order bending theory of shallow shells using a conventional plastic strip model to account for the plastic deformations around the crack border.

Erdogan, F.↗

NASA NTRS1973

Expansion pattern of helium-enriched shells associated with solar flares

The dependence of the thickness of the helium-enriched shell on the longitudinal position of the parent flares is considered along with the large-scale configuration of the expanding shell in interplanetary space. It is found that shock waves, magnetic bottles, and helium-enriched shells appear to expand eastwards of the meridian plane which crosses the flare region. It seems that the formation of the observed pattern of the shells is influenced by the interplanetary magnetic field between the sun and the earth.

Sakurai, K.↗

NASA NTRS1974

Application of critical COD and plastic instability concepts to fracture of shells

The paper deals with the initiation, growth, and possible arrest of fracture in shell structures containing initial defects which may be approximated by an isolated part-through crack. The main study is restricted to the structures in which the net section of the shell wall around the defect zone is fully yielded. The problem is solved by using an 8th order shallow shell theory with a conventional plastic strip model to account for the plastic deformations. Using the critical COD or the plastic instability as fracture criterion, the results are applied to the fracture propagation and arrest in shells. The calculated results are then compared with those obtained from the experiments on zircaloy, aluminum, and steel pipes.

Erdogan, F.↗

NASA NTRS1974

Static, stability, and dynamic analysis of shells of revolution by numerical integration - A comparison

Recent innovations in digital computer technology have enabled engineers to analyze shell structures of complex configurations without unduly restrictive approximations. An attempt is made to compare the various programs now generally available from the point of view of the advantages of the relative technique utilized, as well as the programmed state of the art. Many of the comparisons are based on the sample problems solved by the STARS-2 system of programs. These examples indicate both the structural detail which can be analyzed by, and the analytical capabilities available in, the numerical shell-of-revolution programs. All advantages and differences are demonstrated by use of solutions for realistic shell problems in the areas of statics, stability, vibrations, and dynamic response of shells subjected to time-dependent loadings.

Svalbonas, V.↗