SEARCH · Search NASA

Results for “shocks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Measurement and Analysis of Terminal Shock Oscillation and Buffet Forcing Functions on a Launch Vehicle Payload Fairing

The buffet loads on a launch vehicle payload shroud can be impacted by the unsteadiness associated with a terminal shock at high subsonic speeds. At these conditions, flow accelerates to supersonic speeds on the nose of the payload fairing and is terminated by a normal shock on the cylindrical section downstream of the nose cone/cylinder shoulder. The location of the terminal shock and associated separated boundary layer is affected by the freestream Mach number, Reynolds number, and the pitch/yaw of the launch vehicle. Furthermore, even when the freestream conditions and vehicle attitude are constant, this terminal shock oscillates on the surface of the vehicle. The time-varying surface pressure associated with the terminal shock results in unsteady aerodynamic loads that may interact with vehicle structural dynamic modes and the guidance and control of the vehicle. Buffet testing of a 3-percent scale rigid buffet model of a launch vehicle cargo configuration with a tangent-ogive payload shroud was conducted in 2012 and in 2016. Initial buffet forcing functions (BFFs) utilized a coarse pressure sensor distribution on the vehicle surface in which a single longitudinal station with eight sensors observed the terminal shock environment at Mach 0.90. An examination of these circumferential pressures reveal large impulse-like pressure fluctuations and an asymmetry in pressure when the vehicle is at a nonzeroangle of attack that result in high BFFs. Revisions to the shock integration region were made based on computational fluid dynamics and shadowgraph video of shock motion to better represent the BFFs and reduce the high loads resulting from this environment. To more clearly understand this terminal shock environment, a second wind tunnel test was conducted with a dense distribution of 256 sensors at the terminal shock location. These sensor arrays presents a unique opportunity to observe the unsteady terminal shock environment and to characterize the impact of various integration schemes on the BFFs. This paper presents a summary of the development of BFFs for this terminal shock and a detailed analyses of shock region pressure coefficients, coherence, BFFs, shock location time histories, and power spectral density to help guide development of BFFs for other launch vehicle test and analysis programs.

Piatak, David J.↗

NASA NTRS2021

ARTEMIS Observations of Plasma Waves in Laminar and Perturbed Interplanetary Shocks

The ‘Acceleration, Reconnection, Turbulence and Electrodynamics of the Moon's Interaction with the Sun’ (ARTEMIS) mission provides a unique opportunity to study the structure of interplanetary shocks and the associated generation of plasma waves with frequencies between ~50-8000 Hz due to its long duration electric and magnetic field burst waveform captures. We compare wave properties and occurrence rates at 11 quasi-perpendicular interplanetary shocks with burst data within 10 minutes (~3200 proton gyroradii upstream, ~1900 downstream) of the shock ramp. A perturbed shock is defined as possessing a large amplitude whistler precursor in the quasi-static magnetic field with an amplitude greater than ⅓ the difference between the upstream and downstream average magnetic field magnitudes; laminar shocks lack these large precursors and have a smooth, step function-like transition. In addition to wave modes previously observed, including ion acoustic, whistler, and electrostatic solitary waves, waves in the ion acoustic frequency range that show rapid temporal frequency change are common. Three shocks had burst captures in the ramp; of these, the two laminar shocks with burst data in the ramp contained a wide range of large amplitude wave modes in the ramp whereas the one perturbed shock contained no such waves. Thus, energy dissipation through wave-particle interactions is more prominent in these two laminar shocks than in the perturbed shock. Based on observations from all 11 shocks, the The wave occurrence rates for laminar shocks are higher in the transition region, especially the ramp, than downstream. In contrast, perturbed shocks have approximately 2-3 times the wave occurrence rate downstream than laminar shocks.

L. A. Davis↗

NASA NTRS2019

Evolution of the Suprathermal Proton Population at Interplanetary Shocks

We investigate the evolution of the suprathermal (ST) proton population as interplanetary shocks cross 1 au. The variability of the ST proton intensities and energy spectra upstream of the shocks is analyzed in terms of the shock parameters, upstream magnetic field configurations, and preexisting upstream populations. Propitious conditions for the observation of ST particles at distances far upstream from the shock occur in parallel shock configurations when particles can easily escape from the shock vicinity. In this situation, ST intensity enhancements show onsets characterized by velocity dispersion effects and energy spectra that develop into a “hump” profile peaking around ∼10 keV just before the arrival of the shock. The observation of field-aligned proton beams at low energies (5–10 keV) is possible under conditions that facilitate the scatter-free propagation of the particles streaming out of the shock. Upstream of perpendicular shocks, ST intensity enhancements are only observed in close proximity to the shock. Power-law proton spectra develop downstream of the shocks. The functional form for the downstream phase-space density proportional to v(exp -5) is observed only over a limited range of ST energies. The absence of ST populations observed far upstream of interplanetary shocks raises questions about whether ST protons contribute as a seed particle population in the processes of particle acceleration at shocks.

Shock waves↗

NASA NTRS1994

Monte Carlo simulations of particle acceleration at oblique shocks

The Fermi shock acceleration mechanism may be responsible for the production of high-energy cosmic rays in a wide variety of environments. Modeling of this phenomenon has largely focused on plane-parallel shocks, and one of the most promising techniques for its study is the Monte Carlo simulation of particle transport in shocked fluid flows. One of the principal problems in shock acceleration theory is the mechanism and efficiency of injection of particles from the thermal gas into the accelerated population. The Monte Carlo technique is ideally suited to addressing the injection problem directly, and previous applications of it to the quasi-parallel Earth bow shock led to very successful modeling of proton and heavy ion spectra, as well as other observed quantities. Recently this technique has been extended to oblique shock geometries, in which the upstream magnetic field makes a significant angle Theta(sub B1) to the shock normal. Spectral resutls from test particle Monte Carlo simulations of cosmic-ray acceleration at oblique, nonrelativistic shocks are presented. The results show that low Mach number shocks have injection efficiencies that are relatively insensitive to (though not independent of) the shock obliquity, but that there is a dramatic drop in efficiency for shocks of Mach number 30 or more as the obliquity increases above 15 deg. Cosmic-ray distributions just upstream of the shock reveal prominent bumps at energies below the thermal peak; these disappear far upstream but might be observable features close to astrophysical shocks.

Baring, Matthew G.↗

NASA NTRS1995

Locations of termination shock and heliopause based on Voyager plasma and magnetic field data

The locations of the termination shock and the heliopause are studied taking into account the effects of pickup protons. The study uses available plasma and magnetic field data from Voyagers over a 14-year period (1978-1991) and Voyager observation of the 1992-93 radio emission event. Outside 30 AU, pickup protons have a significant influence on dynamical structures of the outer heliosphere. The solar wind is treated as a mixture of electrons, solar wind protons, and interstellar pickup protons. If the magnitude of the interstellar magnetic field B(sub int) is given, one can quantitatively study the motion and location of the termination shock. The location is anti-correlated with the sun spot number and the shock has an average speed of approx. 24 km/s. Because B(sub int) is poorly known, additional information is needed in studying the termination shock. Cummings, et al. have used observations of anomalous cosmic rays to estimate the location of the shock. The observations of the 1991 GMIR and GMIR shock and the 1992-93 radio emission event provide another handle for the study of the termination shock and the heliopause. After its penetration through the termination shock, the GMIR shock continued to propagate in the subsonic region of the solar wind and eventually interacted with the heliopause. This interaction produces a transmitted shock propagating outward in the interstellar medium and a reflected shock propagating inward toward the sun in the subsonic solar wind. The plasma frequencies behind the reflected and the transmitted shock can be, respectively, responsible for the 2- and 3-kHz radio emissions. Taking into account the effects of pickup protons we found that the average locations of the termination shock and the heliopause in 1991-92 are at approximately 66 AU and 150 AU, respectively.

Whang, Y. C.↗

NASA NTRS1996

Comet Shoemaker-Levy 9, Jupiter, and Impact Shock Chemistry

Four years ago this month, a hitherto unknown comet in loose orbit around Jupiter passed so near the giant planet that it was torn apart into 20 fragments by tides. One orbit later, two years ago this month, the fragments of doomed comet P/Shoemaker Levy (SL9) fell into Jupiter. The enormous energies of these impacts (the largest fragments were nearly 1 km across and, hitting at 60 km/s, released some 2-4 x 10(exp 27) ergs) produced enormous explosions. Several of the ejecta plumes were imaged towering 3000 km above Jupiter's limb. The heat released when the plumes fell was considerable and easily observed on Earth. The impacts produced strong shocks, both promptly at the impact site and again, later, and over thousands of kilometers, when the ejecta plume reentered the atmosphere. The focus of this talk will be to discuss what the SL9 impacts taught us about impact shock chemistry - the processes, the ingredients, the results - and what inferences we may draw for impacts on early Earth. Shock chemistry generates a suite of molecules not usually seen on Jupiter. The most surprising report was of a huge amount of diatomic sulfur S2 at the site of the G impact. Other unusual products include CS, CS2, OCS, H2S, SO2, HCN, CO, and H2O; although H2S and H2O are doubtless abundant below the visible clouds. Hot or enhanced CH4 and NH3 were also detected. A general rule of shock chemistry is that CO forms until either C or O is exhausted. If O greater than C, the other products are oxidized, and excess O goes to H2O. If C greater than O, the other products are reduced, and excess C goes to HCN, C2H2, and a wide variety of more complicated organics. Ultimately, given time, the carbon would react all the way to graphite, but in practice the reactions are incomplete. The dark ejecta debris were probably composed in part of carbonaceous particles generated by the shocks. In a sense, the SL9 impacts performed the famous Miller-Urey experiment on a grand scale, with one result being the production of a lot of complex brown organic solids (called "tholins"). We use, a straightforward chemical kinetics model for the H, N, C, O, S system to follow the nonequilibrium chemistry behind the shocks. The model traces the evolving chemical composition of a parcel of gas by directly integrating the web of chemical reactions. Pressure and temperature histories of the parcels are patterned after those calculated by numerical hydrodynamic simulations of the ejecta plume. A given plume parcel is generally shocked twice; t.e a parcel shocked near the impact site is ejected at high velocity and is shocked again when it reenters the atmosphere. The final state of the gas depends mostly on the second shock, provided that the latter is hot enough. The chemical evidence is ambiguous, but most indications are that C greater than O in the shocked, reacting gas. Telltale signatures of abundant oxygen - SO2, SO, CO2, O2 - were not seen, while signatures of abundant carbon - CS, CS2, and HCN - were. On the other hand, abundant H2O would appear to require O greater than C, and two other observed sulfur species, S2 and OCS, appear to form more easily in a somewhat oxidized gas, presumable vaporized from the comet itself. Since on general principles one expects the -comet to have had a more-or-less cosmic composition, i.e. O greater than C, the production of CS, CS2, and HCN probably requires C greater than O in the shocked jovian air. This in turn implies that even the largest fragments released the bulk of their energy above the jovian water table, in all likelihood above 5 bars . There is no evidence in favor of the proposition that a significant amount of wet jovian air was shocked strongly enough to coax water to react; i.e. wet jovian air saw only temperatures significantly below 2000 K.

Zahnle, Kevin↗

NASA NTRS2021

The Dynamics of a High Mach Number Quasi-Perpendicular Shock: MMS Observations

Shock parameters at Earth’s bow shock, in rare instances, can approach the Mach numbers predicted at astrophysical shocks and supernova remnants. We present our analysis of a high Alfv ́en Mach number (MA= 27) shock, by utilizing multipoint measurements from the Magnetospheric Multiscale (MMS) spacecraft during a crossing of Earth’s quasi-perpendicular bow shock. We find that the shock dynamics are mostly driven by reflected ions, perturbations that they generate, and nonlinear amplification of the perturbations. Our analyses indicate that reflected ions create modest magnetic enhancements upstream of the shock front which evolve in a nonlinear manner as they traverse the shock foot. They can transform into proto-shocks that propagate at small angles to the magnetic field and towards the bow shock. The nonstationary bow shock shows signatures of both reformation and surface ripples. Our observations indicate that although shock reformation occurs, the main shock layer never disappears. These observations are at high plasmaβ, a parameter regime which has not been well explored by numerical models.

H Madanian↗

NASA NTRS2021

Oblique High Mach Number Heliospheric Shocks: The Role of α Particles

Spacecraft observations of heliospheric shocks often find oscillations in the magnetic field and density both, upstream and downstream. The downstream magnetic oscillations of oblique collisionless shocks were detected by Wind with 10.9 samples/s and DSCOVR spacecraft with high temporal resolution of 50 samples/s. The density oscillations associated with the shocks are also evident in proton and α particle density by Wind (with much lower temporal resolution). Recently, we have investigated low Mach number low-β oblique shock oscillations using satellite data and 2.5D hybrid modeling with electrons modeled as fluid and ions modeled as particles and found that α particles—an important component of heliospheric plasma—may affect considerably the downstream oscillations and the shock structure. The objective of the present study is to investigate the effects of α particles on high Mach number heliospheric shocks dynamics, oscillations, nonstationarity, and shock-front rippling. We extend the study to high Mach number shocks (M > 3), investigate several α particle typical densities, and compare the results for the various shock parameters. We model the effects of α particles on the shock ramp, wake, and downstream oscillation structure and the kinetic properties of proton and α particle velocity distributions at various locations downstream of the shocks. Using the 2.5D hybrid model we found that the modeled high Mach number quasi-perpendicular shock magnetic and density structures are significantly affected by α particles with typical solar wind relative abundances, suggesting that the observed high Mach number shocks are similarly affected by α particles.

Leon Ofman↗

NASA NTRS1985

The evolution of interplanetary shocks

Unambiguous identification of the solar events associated with 48 interplanetary (IP) shocks has been facilitated by the observation of radio emission generated by the shocks. This identification makes possible an investigation of the way in which these shocks evolve and of the relationship between solar event 'strength' and shock velocity. All but two of the 48 solar events associated with IP type II radio emission included long-duration soft X-ray events (LDE's). In addition, it is shown that all intense LDE's are associated with IP shocks. A weak correlation between the integral flux of soft X-rays and the average velocity of the associated shock is suggested. However, for two events all of the usual flare signatures were absent, and the events are associated with the disappearance of solar filaments. It is shown that the shocks propagate isotropically over about 50 deg from the source site. Beyond 50 deg the shocks weaken particularly on their eastern flanks. As a consequence, shocks originating on the west limb cannot reach the earth. IP type II radio emission is dependent on shock velocity with faster shocks producing more intense emission. The study shows that radio intensities provide information about the evolution of IP shocks.

Cane, H. V.↗

NASA NTRS1985

Shock evolution in the outer heliosphere - Voyager and Pioneer observations

Observations are reported of 35 interplanetary shocks detected at heliocentric distances between 6.5 and 9.4 AU in mid-1980 by the Voyager 1, Voyager 2, and Pioneer 11 spacecraft. These shocks were all evidently generated by the interaction of corotating streams. Measurements of the pre- and postshock plasma parameters are used to determine the shock normals and speeds for each shock. Twelve of these 35 events are observed at all three spacecraft. The shock parameters at each spacecraft are compared to determine the time history for the 12 shocks. The single-spacecraft determinations of shock normal and speed are compared wih the results of several techniques for determining shock velocities using all three spacecraft. It is found that shocks undergo significant evolution as they travel past the three spacecraft. Every shock seen by both end spacecraft was also seen by the middle spacecraft. Shock formation possibly may be occurring at a heliocentric distance as great as 7 AU. It appears that the shock surfaces have a complex three-dimensional structure with 'ripples' on a scale of 0.001-1.0 AU.

Gazis, P. R.↗

NASA NTRS1986

Fast-shock formation in line-tied magnetic reconnection models of solar flares

In a previous study by the author, an approximately stationary fast shock was tentatively identified in a numerical experiment designed to study line-tied magnetic reconnection. Here the evidence for the occurrence of a stationary fast shock is reexamined, and the previous identification is confirmed. In the numerical experiment, line-tied reconnection is modeled by a configuration which produces two supermagnetosonic outflow jets - one directed upward, away from the photosphere, and one directed downward, toward an arcade of closed magnetic loops tied to the photosphere. The fast shock occurs when the downward-directed jet encounters the obstacle formed by the closed loops. Although the existence of a stationary, or nearly stationary, fast shock is confirmed, the transition from the supermagnetosonic flow region upstream of the shock to the nearly static region downstream of the shock is more complicated than was previously thought. Immediately downstream of the shock, there exists a deflection sheath in which the submagnetosonic flow coming out of the shock is diverted around the region of static closed loops. The MHD jump conditions are used to investigate the characteristics of the fast shock and to show that a stationary shock cannot exist unless accompanied by a deflection sheath. Analysis of the shock's location and dimensions suggests that such fast shocks may contribute to particle acceleration and to thermal condensation in flares.

Forbes, T. G.↗

NASA NTRS1990

Survival of carbon grains in shocks

Supernova shocks play a significant part in the life of an interstellar grain. In a typical 10 to the 9th power year lifetime, a grain will be hit by an average of 10 shocks of 100 km s(sup -1) or greater velocity, and even more shocks of lower velocity. Evaluation of the results of this frequent shock processing is complicated by a number of uncertainties, but seems to give about 10 percent destruction of silicate grains and about half that for graphite grains. Because of the frequency of shocking, the mineralogy and sizes of the grain population is predominately determined by shock processing effects, and not by the initial grain nucleation and growth environment. One consequence of the significant role played by interstellar shocks is that a certain fraction (up to 5 percent) of the carbon should be transformed into the diamond phase. Diamond transformation is observed in the laboratory at threshold shock pressures easily obtainable in grain-grain collisions in supernova shocks. Yields for transforming graphite, amorphous carbon, glassy carbon, and other nearly pure carbon solids into diamond are quite high. Impurities up to at least the 10 percent level (for oxygen) are tolerated in the process. The typical size diamond expected from shock transformation agrees well with the observed sizes in the Lewis et al. findings in meteoritic material. Isotropic anomalies already contained in the grain are likely to be retained through the conversion process, while others may be implanted by the shock if the grain is close to the supernova. The meteoritic diamonds are likely to be the results of transformation of carbon grains in grain-grain collisions in supernova shock waves.

Seab, C. Gregory↗

NASA NTRS1992

Experimental studies of hypersonic shock-wave boundary-layer interactions

Two classes of shock-wave boundary-layer interactions were studied experimentally in a shock tunnel in which a low Reynolds number, turbulent flow at Mach 8 was developed on a cold, flat test surface. The two classes of interactions were: (1) a swept interaction generated by a wedge ('fin') mounted perpendicularly on the flat plate; and (2) a two-dimensional, unseparated interaction induced by a shock impinging near an expansion corner. The swept interaction, with wedge angles of 5-20 degrees, was separated and there was also indication that the strongest interactions prossessed secondary separation zones. The interaction spread out extensively from the inviscid shock location although no indication of quasi-conical symmetry was evident. The surface pressure from the upstream influence to the inviscid shock was relatively low compared to the inviscid downstream value but it rose rapidly past the inviscid shock location. However, the surface pressure did not reach the downstream inviscid value and reasons were proposed for this anomalous behavior compared to strongly separated, supersonic interactions. The second class of interactions involved weak shocks impinging near small expansion corners. As a prelude to studying this interaction, a hypersonic similarity parameter was identified for the pure, expansion corner flow. The expansion corner severely damped out surface pressure fluctuations. When a shock impinged upstream of the corner, no significant changes to the surface pressure were found as compared to the case when the shock impinged on a flat plate. But, when the shock impinged downstream of the corner, a close coupling existed between the two wave systems, unlike the supersonic case. This close coupling modified the upstream influence. Regardless of whether the shock impinged ahead or behind the corner, the downstream region was affected by the close coupling between the shock and the expansion. Not only was the mean pressure distribution modified but the unsteadiness in the surface pressure was reduced compared to the flat-plate case.

Lu, Frank K.↗

NASA NTRS1993

Interaction between perpendicular magnetohydrodynamic shocks

A general analysis is made of the collision and merging of perpendicular shocks as well as the interaction between a shock and a tangential discontinuity. It is found that two head-on shocks diminish both in strength after collisions and a tangential discontinuity forms between them. The property of the discontinuity depends on the relative strength of the two shocks. No discontinuity occurs if the shocks are equal in strength. The emerging of two shocks propagating in the same direction results in a strong shock followed by a tangential discontinuity and a reverse wave. The reverse wave is a rarefaction wave if one or both of the shocks are strong. If the shocks are both weak, a critical adiabatic index (CAI) exists. The reverse wave is a rarefaction wave if the wavelength is less than the CAI and a shock exists if the wavelength is greater than the CAI. As a wake shock enters from a medium of higher wave impedance into that of lower wave impedance, the reflected wave is a rarefaction wave and the total pressure ratio decreases and the velocity jump increases after the shock passes through the border.

Hu, Y. Q.↗

NASA NTRS1994

Standing shocks in a two-fluid solar wind

We present a numerical study of the formation of standing shocks in the solar wind using a two-fluid time-dependent model in the presence of Alfven waves. Included in this model is the adiabatic cooling and thermal conduction of both electrons and protons. In this study, standing shocks develop in the flow when additional critical points form as a result of either localized momentum addition or rapid expansion of the flow tube below the existing sonic point. While the flow speed and density exhibit the same characteristics as found in earlier studies of the formation of standing shocks, the inclusion of electron and proton heat conduction produces different signatures in the electron and proton temperature profiles across the shock layer. Owing to the strong heat conduction, the electron temperature is nearly continuous across the shock, but its gradient has a negative jump across it, thus producing a net heat flux out of the shock layer. The proton temperature exhibits the same characteristics for shocks produced by momentum addition but behaves differently when the shock is formed by the rapid divergence of the flow tube. The adiabatic cooling in a rapidly diverging flow tube reduces the proton temperature so substantially that the proton heat conduction becomes negligible in the vicinity of the shock. As a result, protons experience a positive jump in temperature across the shock. While Alfven waves do not affect the formation of standing shocks, they contribute to the change of the mmomentum and energy balance across them. We also find that for this solar wind model the inclusion of thermal conduction and adiabatic cooling for the elctrons and protons increases significantly the range of parameters characterizing the formation of standing shocks over those previously found for isothermal and polytropic models.

Habbal, Shadia R.↗

NASA NTRS1994

Shock propagation and the generation of magnetohydrodynamic wave fields in inhomogeneous molecular clouds

We develop a simple one-dimensional model for the interaction of a steady, thin, planar shock wave with a nonrigid cloud which may be in motion relative to the surrounding medium, and we apply the model to shocks impinging on, and propagating through, molecular clouds. Both 'adiabatic' (gamma = 5/3) and radiative (gamma = 1) shocks are considered and we allow for the presence of a uniform magnetic field directed either parallel or perpendicular to the shock normal. The former field orientation is equivalent to the hydrodynamic case, and the latter involves only fast MHD shocks. We focus on the manner in which such shocks can generate internal kinetic motions in the cloud on a range of size and density scales through the direct acceleration of cores and clumps by shocks transmitted into them and through the generation of an MHD wavefield via the reflection of the incident shock at clump boundaries. We find that stronger incident Mach numbers and smaller density contrasts lead to more efficient cloud acceleration, as do isothermal intercloud shocks and small intercloud magnetic field strengths. The acceleration efficiency is insensitive to the adiabatic index and the magnetic field strength in the cloud itself. For typical parameter choices, the direct acceleration of clouds and clumps by strong shocks is found to be substantial and could at least in part account for their observed velocity dispersions. If the shocks are moderately weak, the final velocity of the cloud is linearly related to its initial velocity, with higher acceleration giving shallower slopes (i.e., final velocity distributions which are less sensitive to the initial distribution). Compared to the kinetic energy of the postshock cloud, the energy given to the wavefield at each encounter is small, and the heating of the interclump medium by the dissipation of this wavefield is found to be insufficient to balance the cooling rate in the cloud as a whole (although it may be important in particular regions), even if this medium is warm, unless it is also extremely tenuous (n approximately less than 0.1/cu cm). Nevertheless, the correction for the velocity imparted to the cloud leads to a substantial increase in the critical incident Mach numner for wave emission over that reported by Spitzer for the rigid case. The implications of our model for shock-induced star formation are discussed briefly.

Miesch, Mark S.↗

NASA NTRS1995

Motion of the Heliospheric Termination Shock at High Heliographic Latitude

We expect the mean distance of the heliospheric termination shock to be greater (smaller) at polar latitudes than at equatorial latitudes, depending on whether the mean dynamic pressure of the solar wind is greater or smaller at high latitudes. The heliospheric termination shock is expected to move in response to variation in upstream solar wind conditions, so that at any particular instant the termination shock will resemble a distorted asymmetric balloon with some parts moving inward and others moving outward. If the shock is a gasdynamic or magnetohydrodynamic shock the results of the analysis depend only very weakly on the nature of the upstream disturbance; typical speeds of the disturbed shock are approximately 100 to 200 km/s. In the absence of a significant latitude gradient of the typical magnitude of solar wind disturbances typical motions of the disturbed shock at polar latitudes would be about twice as fast, due to the higher speed of the high-latitude wind. If the dynamics of the termination shock are dominated by acceleration of the anomalous component of the cosmic rays, the motion of the shock in response to a given disturbance is substantially slower than in the gasdynamic case. Conceivably, particle acceleration might be a less important effect at higher latitudes, and we envision the possibility of a termination shock that is dominated by particle acceleration at lower latitudes and is an MHD shock at high latitudes. In this event high latitude solar wind disturbances would produce substantially larger inward and outward motions of the shock in the polar regions.

Barnes, Aaron↗

NASA NTRS1997

A Study of Fundamental Shock Noise Mechanisms

This paper investigates two mechanisms fundamental to sound generation in shocked flows: shock motion and shock deformation. Shock motion is modeled numerically by examining the interaction of a sound wave with a shock. This numerical approach is validated by comparison with results obtained by linear theory for a small-disturbance case. Analysis of the perturbation energy with Myers' energy corollary demonstrates that acoustic energy is generated by the interaction of acoustic disturbances with shocks. This analysis suggests that shock motion generates acoustic and entropy disturbance energy. Shock deformation is modeled numerically by examining the interaction of a vortex ring with a shock. These numerical simulations demonstrate the generation of both an acoustic wave and contact surfaces. The acoustic wave spreads cylindrically. The sound intensity is highly directional and the sound pressure increases with increasing shock strength. The numerically determined relationship between the sound pressure and the Mach number is found to be consistent with experimental observations of shock noise. This consistency implies that a dominant physical process in the generation of shock noise is modeled in this study.

Meadows, Kristine R.↗