Search NASA⌕ Search

SEARCH · Search NASA

Results for “source time functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Use of acoustic wave travel-time measurements to probe the near-surface layers of the Sun

The variation of solar p-mode travel times with cyclic frequency nu is shown to provide information on both the radial variation of the acoustic potential and the depth of the effective source of the oscillations. Observed travel-time data for waves with frequency lower than the acoustic cutoff frequency for the solar atmosphere (approximately equals 5.5 mHz) are inverted to yield the local acoustic cutoff frequency nu(sub c) as a function of depth in the outer convection zone and lower atmosphere of the Sun. The data for waves with nu greater than 5.5 mHz are used to show that the source of the p-mode oscillations lies approximately 100 km beneath the base of the photosphere. This depth is deeper than that determined using a standard mixing-length calculation.

Jefferies, S. M.↗

Sensor Radiance for a Midlatitude Atmospheric Model

The Herman radiative transfer code which iteratively traces solar radiance through a discrete number of scattering angles and many atmospheric layers was transferred to a personnal computer to reduce time in recompiling the source code. The code was then used to predict what ground reflectance would saturate the TM sensor output given a standard midlatitude atmospheric model. Output radiance is tabulated for the first four bands. Plots show radiance at the sensor as a function of solar zenith angle from a visibility of 40 km; solar zenith angle as a function of time of year for four latitudes over a typical portion of the descending node of a LANDSAT orbit; and values of ground reflectance required to saturate the TM sensor from three different aerosol loading conditions (corresponding to about 20 km, 40 km. and greater than 100 km visibility).

Source record↗

Temporal Constraint Reasoning With Preferences

A number of reasoning problems involving the manipulation of temporal information can naturally be viewed as implicitly inducing an ordering of potential local decisions involving time (specifically, associated with durations or orderings of events) on the basis of preferences. For example. a pair of events might be constrained to occur in a certain order, and, in addition. it might be preferable that the delay between them be as large, or as small, as possible. This paper explores problems in which a set of temporal constraints is specified, where each constraint is associated with preference criteria for making local decisions about the events involved in the constraint, and a reasoner must infer a complete solution to the problem such that, to the extent possible, these local preferences are met in the best way. A constraint framework for reasoning about time is generalized to allow for preferences over event distances and durations, and we study the complexity of solving problems in the resulting formalism. It is shown that while in general such problems are NP-hard, some restrictions on the shape of the preference functions, and on the structure of the preference set, can be enforced to achieve tractability. In these cases, a simple generalization of a single-source shortest path algorithm can be used to compute a globally preferred solution in polynomial time.

Khatib, Lina↗

Amalthea - Implications of the temperature observed by Voyager

The temperature profile of Amalthea's surface layer is modeled as a function of location and time of day, assuming a triaxial ellipsoid shape and thermal properties similar to those of the lunar soil. Although the major heat source is direct insolation, temperatures are slightly increased by thermal radiation from Jupiter, sunlight reflected from the planet, and charged particle bombardment. Possible sources of error in the model are discussed in detail, including satellite shape effects, unusually low emissivity, uncommonly rough surface, abnormal thermal inertia, charged particle flux variability, and Joule heating. Voyager 1 IRIS observations suggest that the Amalthean surface has an emissivity near unity, but cannot put any useful limits on the thermal inertia of the Amalthean surface layer.

Simonelli, D. P.↗

An EPROM-based function generator

A circuit is described to produce arbitrary time-dependent voltage functions derived from digital information stored in EPROMs. While this circuit is designed to be used as a modulator of the microwave pump source or a solid state low noise maser, it can be readily adapted for other applications.

Fowler, L.↗

A signal detection strategy for the SETI All Sky Survey

A source detection strategy for the SETI All Sky Survey is described. The method is designed to detect continuous wave (or very narrowband) sources transitting an antenna beam. The short-time spectra of the received signal are accumulated, and candidate extraterrestrial sources are recognized by the recognized by the presence of narrowband power exceeding a threshold function. The threshold function is derived using a Neyman-pearson hypothesis test.

Lawton, W.↗

Evidence for X-ray flux and spectral modulation by absorption in NGC 6814. 1: The nature of the most rapid variability

The Seyfert 1 galaxy NGC 6814 was observed using the Japanese X-ray astronomy satellite Ginga in 1990 April and October. The rapid variability characteristically associated with this source was reconfirmed. Specifically, three dips were found in the April observation in which the flux dropped to nearly zero in approximately 300 s. The doubling timescale was approximately 50 s. A similar but separated drop and rise in flux was observed in the October data, different in that the flux did not decrease completely to zero. A detailed analysis of the data around the structures of most rapid variability found spectral variability and lags in flux between different energy bands. Lags were on the order of a few to tens of seconds for the April data, and on the order of tens to a couple of hundred seconds for the October data. The sense of the lags was such that during flux decreases the hard flux lagged, while during flux increases the soft flux lagged. Associated significant apparent hardening of the spectrum at low flux was observed in the April data. Apparent hardening of the spectrum also occurred in the October flux decrease, to a photon index of GAMMA = 0.85; however, the spectrum softened at lowest flux to the index of the predecrease level, GAMMA = 1.54. In the April dips, the line flux was found to decrease significantly. A marginal decrease in line flux was also observed in the October data. The variability of the line flux reconfirmed the result of Kunieda et al. (1990), who found that the line production region must be within approximately 300 light-seconds from the source. To explain the observational results, a variable-absorption model was proposed, in which the column density was assumed to vary as a function of time. Other physical processes, including intrinsic spectral changes and warm absorber models, which could account for the fastest variability, could be ruled out by the results of the data analysis. A primary constraint found for geometrical models is that the material which is doing the absorption must have relatively low ionization (xi less than 100). This result leads to severe constraints on a general orbiting cloud model, requiring high densities (n approximately 10(exp 16)/cu cm) and sheetlike geometry.

Leighly, Karen↗

Eclipse timings of the low-mass X-ray binary EXO 0748-676: Statistical arguments against orbital period changes

EXO 0748-676, an eclipsing low-mass X-ray binary, is one of only about four or five low-mass X-ray binaries for which orbital period evolution has been reported. We observed a single eclipse egress with ROSAT . The time of this egress is consistent with the apparent increase in P(sub orb) previously reported on the basis of EXOSAT and Ginga observations. Standard analysis, in which O-C (observed minus calculated) timing residuals are examined for deviations from a constant period, implicitly assume that the only uncertainty in each residual is measurement error and that these errors are independent. We argue that the variable eclipse durations and profiles observed in EXO 0748-676 imply that there is an additional source of uncertainty in timing measurements, that this uncertainty is intrinsic to the binary system, and that it is correlated from observation to observation with a variance which increases as a function of the number of binary cycles between observations. This intrinsic variability gives rise to spurious trends in O-C residuals which are misinterpreted as changes in the orbital period. We describe several statistics tests which can be used to test for the presence of intrinsic variability. We apply those statistical tests which are suitable to the EXO 0748-676 observations. The apparent changes in the orbital period of EXO 0748-676 can be completely accounted for by intrinsic variability with an rms variability of approximately 0.35 s per orbital cycle. The variability appears to be correlated from cycle-to-cycle on timescales of less than 1 yr. We suggest that the intrinsic variability is related to slow changes in either the source's X-ray luminosity or the structure of the companion star's atmosphere. We note that several other X-ray binaries and cataclysmic variables have previously reported orbital period changes which may also be due to intrinsic variability rather than orbital period evolution.

Hertz, Paul↗

Evaluation of Performance of Five Parallel Biological Water Proce

The objective of the work entitled Molecular Characterization of Eubacteria in a Biological Water Processor was to gain an understanding of the microbial diversity and species stability of the consortia that inhabit an anoxic bioreactor and to correlate those factors with functional performance, mechanical reliability, and stability. The evaluation was divided into four studies. During Study 1, replicate biological water processor (BWP) systems were operated to evaluate variability in the microbial diversity over time as a function of the initial consortia used for inoculation of the BWP reactors. Study 2 was designed to investigate the impact of an inoculum source on BWP performance. Study 3 was a modification of Study 2 where the impact of inoculum on BWP performance from inoculation until steady state operations was monitored. In Study 4, the reactors were divided into three different operational periods, based on the operational periods of the integrated water recovery test at the Johnson Space Center (JSC) in 2001.

Vega, Leticia M.↗

Optimization Algorithms as Quantum Performance Benchmarks

Combinatorial optimization is anticipated to be one of the primary use cases for quantum computation in the coming years. The Quantum Approximate Optimization Algorithm (QAOA) and Quantum Annealing (QA) have the potential to demonstrate significant run-time performance benefits over current state-of-the-art solutions. Using existing methods for characterizing classical optimization algorithms, we analyze solution quality obtained by solving Max-Cut problems using a quantum annealing device and gate-model quantum simulators and devices. This is used to guide the development of an advanced benchmarking framework for quantum computers designed to evaluate the trade-off between run-time execution performance and the solution quality for iterative hybrid quantum-classical applications. The framework generates performance profiles through effective visualizations that show performance progression as a function of time for various problem sizes and illustrates algorithm limitations uncovered by the benchmarking approach. The framework is an enhancement to the existing open-source QED-C Application-Oriented Benchmark suite and can connect to the open-source analysis libraries. The suite can be executed on various quantum simulators and quantum hardware systems.

benchmarking↗

Use of a minimum rate of change formalism to quantify variability of extragalactic X-ray sources

A method to obtain rigorous, quantitative constraints on the rate of variability is suggested. The method is motivated by the case when the existence of time variability is unequivocal, but the statistical uncertainties are too large to apply more direct methods such as power spectrum analysis. Conceptually the data are fitted to a function of time and a set of free parameters. The method of Lagrange multipliers is used to solve for that parameter set which minimizes the value of the derivative at time t(m). The result can be related physically to the minimum efficiency with which rest mass must be converted to radiation energy. Slightly different formulations of the general principal are used to estimate maximum source size scales associated with the variability.

Schwartz, Daniel A.↗

A Concept for Run-Time Support of the Chapel Language

A document presents a concept for run-time implementation of other concepts embodied in the Chapel programming language. (Now undergoing development, Chapel is intended to become a standard language for parallel computing that would surpass older such languages in both computational performance in the efficiency with which pre-existing code can be reused and new code written.) The aforementioned other concepts are those of distributions, domains, allocations, and access, as defined in a separate document called "A Semantic Framework for Domains and Distributions in Chapel" and linked to a language specification defined in another separate document called "Chapel Specification 0.3." The concept presented in the instant report is recognition that a data domain that was invented for Chapel offers a novel approach to distributing and processing data in a massively parallel environment. The concept is offered as a starting point for development of working descriptions of functions and data structures that would be necessary to implement interfaces to a compiler for transforming the aforementioned other concepts from their representations in Chapel source code to their run-time implementations.

James, Mark↗

Partial performance degradation of a remote sensor in a space environment, and some probable causes

The Multispectral Scanner (MSS) was launched on the Earth Resources Technology Satellite (ERTS-1) on July 23, 1972. The MSS has two calibration systems, one internal and one external. Both calibration systems have shown strong, spectrally dependent performance degradation since launch. This paper presents details on the optical system of the MSS and data on the performance degradation as a function of both spectral interval and time in orbit. The history of the MSS during tests is traced, and it is shown that hydrocarbons from an external source may have been deposited on optical surfaces in the instrument. It is postulated that these contaminant coatings may have polymerized as a result of the exposure to UV light from the sun, increasing their blue absorbtion and accounting for the observed performance degradation.

Horan, J. J.↗

Development of rotorcraft interior noise control concepts. Phase 2: Full scale testing, revision 1

The phase 2 effort consisted of a series of ground and flight test measurements to obtain data for validation of the Statistical Energy Analysis (SEA) model. Included in the gound tests were various transfer function measurements between vibratory and acoustic subsystems, vibration and acoustic decay rate measurements, and coherent source measurements. The bulk of these, the vibration transfer functions, were used for SEA model validation, while the others provided information for characterization of damping and reverberation time of the subsystems. The flight test program included measurements of cabin and cockpit sound pressure level, frame and panel vibration level, and vibration levels at the main transmission attachment locations. Comparisons between measured and predicted subsystem excitation levels from both ground and flight testing were evaluated. The ground test data show good correlation with predictions of vibration levels throughout the cabin overhead for all excitations. The flight test results also indicate excellent correlation of inflight sound pressure measurements to sound pressure levels predicted by the SEA model, where the average aircraft speech interference level is predicted within 0.2 dB.

Yoerkie, C. A.↗

Method of remotely characterizing thermal properties of a sample

A sample in a wind tunnel is radiated from a thermal energy source outside of the wind tunnel. A thermal imager system, also located outside of the wind tunnel, reads surface radiations from the sample as a function of time. The produced thermal images are characteristic of the heat transferred from the sample to the flow across the sample. In turn, the measured rates of heat loss of the sample are characteristic of the flow and the sample.

Heyman, Joseph S.↗

Analysis of large system black box verification test data

Issues regarding black box, large systems verification are explored. It begins by collecting data from several testing teams. An integrated database containing test, fault, repair, and source file information is generated. Intuitive effectiveness measures are generated using conventional black box testing results analysis methods. Conventional analysts methods indicate that the testing was effective in the sense that as more tests were run, more faults were found. Average behavior and individual data points are analyzed. The data is categorized and average behavior shows a very wide variation in number of tests run and in pass rates (pass rates ranged from 71 percent to 98 percent). The 'white box' data contained in the integrated database is studied in detail. Conservative measures of effectiveness are discussed. Testing efficiency (ratio of repairs to number of tests) is measured at 3 percent, fault record effectiveness (ratio of repairs to fault records) is measured at 55 percent, and test script redundancy (ratio of number of failed tests to minimum number of tests needed to find the faults) ranges from 4.2 to 15.8. Error prone source files and subsystems are identified. A correlational mapping of test functional area to product subsystem is completed. A new adaptive testing process based on real-time generation of the integrated database is proposed.

Clapp, Kenneth C.↗

Allan deviation computations of a linear frequency synthesizer system using frequency domain techniques

Allan Deviation computations of linear frequency synthesizer systems have been reported previously using real-time simulations. Even though it takes less time compared with the actual measurement, it is still very time consuming to compute the Allan Deviation for long sample times with the desired confidence level. Also noises, such as flicker phase noise and flicker frequency noise, can not be simulated precisely. The use of frequency domain techniques can overcome these drawbacks. In this paper the system error model of a fictitious linear frequency synthesizer is developed and its performance using a Cesium (Cs) atomic frequency standard (AFS) as a reference is evaluated using frequency domain techniques. For a linear timing system, the power spectral density at the system output can be computed with known system transfer functions and known power spectral densities from the input noise sources. The resulting power spectral density can then be used to compute the Allan Variance at the system output. Sensitivities of the Allan Variance at the system output to each of its independent input noises are obtained, and they are valuable for design trade-off and trouble-shooting.

Wu, Andy↗

Modeling, Monitoring and Fault Diagnosis of Spacecraft Air Contaminants

Control of air contaminants is a crucial factor in the safety considerations of crewed space flight. Indoor air quality needs to be closely monitored during long range missions such as a Mars mission, and also on large complex space structures such as the International Space Station. This work mainly pertains to the detection and simulation of air contaminants in the space station, though much of the work is easily extended to buildings, and issues of ventilation systems. Here we propose a method with which to track the presence of contaminants using an accurate physical model, and also develop a robust procedure that would raise alarms when certain tolerance levels are exceeded. A part of this research concerns the modeling of air flow inside a spacecraft, and the consequent dispersal pattern of contaminants. Our objective is to also monitor the contaminants on-line, so we develop a state estimation procedure that makes use of the measurements from a sensor system and determines an optimal estimate of the contamination in the system as a function of time and space. The real-time optimal estimates in turn are used to detect faults in the system and also offer diagnoses as to their sources. This work is concerned with the monitoring of air contaminants aboard future generation spacecraft and seeks to satisfy NASA's requirements as outlined in their Strategic Plan document (Technology Development Requirements, 1996).

Ramirez, W. Fred↗