Search NASA⌕ Search

SEARCH · Search NASA

Results for “stability selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Design of Advanced Thin-Film Catalysts for Electrooxidation of Formic Acid

Successful development of catalysts for electrochemical formic acid oxidation (FAO) requires finding an optimal balance between catalytic performance (activity, stability, and selectivity) and catalyst cost. While platinum is one of the most active catalyst materials for FAO, it suffers from performance loss at low overpotentials due to poisoning with CO, which is one of the intermediates formed in the so-called indirect path of FAO. In this work, we explored the synergistic effects of the supporting material and annealing temperature on the performance of Pt thin films for FAO in acidic media. Compared to the as-prepared Pt films, the annealed films show up to 5-fold and 15-fold improvement for FAO on Pt@Ni and Pt@Cr, respectively. In conclusion, while the most active Pt@Ni thin film shows the lowest stability, the most active Pt@Cr thin film is also the most stable, challenging conventional trade-offs in electrocatalysis and providing a promising candidate for FAO nanocatalyst synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Propane Dehydrogenation on Single-Site [PtZn4] Intermetallic Catalysts

Propane dehydrogenation (PDH) is a commercial propylene production technology that has received much attention, but high reaction temperature results in decrease of propylene selectivity and catalyst stability. This paper describes a single-site [PtZn 4 ] catalyst by assembling atomically ordered intermetallic alloy (IMA) as a selective and ultrastable PDH catalyst. The catalyst enables more than 95% propylene selectivity from 520 to 620 oC. No obvious deactivation is observed within 160-hours test, superior to PtSn/Al 2 O 3 and state-of-the-art Pt-based catalysts. Additionally, based on in situ X-ray absorption fine-structure, X-ray photoelectron spectroscopy measurements and density functional theory calculations, we reveal that the surface [PtZn 4 ] ensembles in PtZn IMAs serve as the key active site structures, wherein the geometry-isolated and electron-rich Pt1 site in [PtZn 4 ] ensembles readily promotes the first and second C–H cleavage of propane, but inhibits further dehydrogenation of surface-bounded propylene. This significantly improves the selectivity and stability by prohibiting coke side reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Catalyst synthesis under CO 2 electroreduction favours faceting and promotes renewable fuels electrosynthesis

The electrosynthesis of C 2+ hydrocarbons from CO 2 has garnered recent attention in light of the relatively high market price per unit energy input. Today’s low selectivities and stabilities towards C 2+ products at high current densities curtail system energy efficiency, which limits their prospects for economic competitiveness. Here we present a materials processing strategy based on in situ electrodeposition of copper under CO 2 reduction conditions that preferentially expose and maintain Cu(100) facets, which favour the formation of C 2+ products. We observe capping of facets during catalyst synthesis and achieve control over faceting to obtain a 70% increase in the ratio of Cu(100) facets to total facet area. We report a 90% Faradaic efficiency for C 2+ products at a partial current density of 520 mA cm –2 and a full-cell C 2+ power conversion efficiency of 37%. We achieve nearly constant C2H4 selectivity over 65 h operation at 350 mA cm –2 in a membrane electrode assembly electrolyser.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Role of Co 2 C in ZnO-promoted Co Catalysts for Alcohol Synthesis from Syngas

Controlling selectivity is a key goal in the design of a heterogeneous catalyst. Herein, we present detailed characterization and activity of silica–supported cobalt catalysts modified by atomic layer deposition of ZnO. After reduction, the resulting catalysts exhibit substantial selectivity towards alcohol production during CO hydrogenation compared to catalysts containing only cobalt. The prepared catalysts have up to 46 % selectivity toward alcohols with 39 % of the alcohols corresponding to ethanol and other higher alcohols, albeit with reduced activity. In situ characterization of the catalyst by X–ray diffraction and X–ray absorption spectroscopy reveals details on the structural evolution in syngas, CO+H 2 , and shows that ZnO promotion of Co results in the formation of Co 2 C under catalytic conditions. A mechanism is proposed, supported by density functional theory calculations, which explains Co 2 C formation by the blocking of Co step sites by Zn species. The ZnO acts a dual promoter both by facilitating Co 2 C formation and by modifying the resulting Co 2 C. In conclusion, the Co 2 C formed from the ZnOpromoted Co catalysts displays improved thermal stability and selectivity compared with similar Co 2 C catalysts without Zn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2004

High Sensitivity, Low Power Nano Sensors and Devices for Chemical Sensing

The chemical sensor market has been projected to grow to better than $40 billion dollars worldwide within the next 10 years. Some of the primary motivations to develop nanostructured chemical sensors are monitoring and control of environmental pollution; improved diagnostics for consumption; improvement in measurement precision and accuracy; and improved detection limits for Homeland security, battlefield environments, and process and quality control of industrial applications. In each of these applications, there is demand for sensitivity, selectivity and stability of environmental and biohazard detection and capture beyond what is currently commercially available. Nanotechnology offers the ability to work at the molecular level, atom by atom, to create large structures with fundamentally new molecular organization. It is essentially concerned with materials, devices, and systems whose structures and components exhibit novel and significantly improved physical, chemical and biological properties, phenomena, and process control due to their nanoscale size. One such nanotechnology-enabled chemical sensor has been developed at NASA Ames leveraging nanostructures, such as single walled carbon nanotubes (SWNTs) and metal oxide nanobelts or nanowires, as a sensing medium bridging a pair of interdigitated electrodes (IDE) realized through a silicon-based microfabrication and micromachining technique. The DE fingers are fabricated on a silicon substrate using standard photolithography and thin film metallization techniques. It is noteworthy that the fabrication techniques employed are not confined to the silicon substrate. Through spin casting and careful substrate selection (i.e. clothing, glass, polymer, etc.), additional degrees of freedom can be exploited to enhance sensitivity or to conform to unique applications. Both in-situ growth of nanostructured materials and casting of nanostructured dispersions were used to produce analogous chemical sensing devices.

Li, Jing↗
DOE OSTI2017

New Architectures for Designed Catalysts: Selective Oxidation using AgAu Nanoparticles on Colloid-Templated Silica

A highly modular synthesis of designed catalysts with controlled bimetallic nanoparticle size and composition and a well-defined structural hierarchy is shown. Exemplary catalysts—bimetallic dilute Ag-in-Au nanoparticles partially embedded in a porous SiO 2 matrix (SiO 2 –Ag x Au y )—were synthesized by the decoration of polymeric colloids with the bimetallic nanoparticles followed by assembly into a colloidal crystal backfilled with the matrix precursor and subsequent removal of the polymeric template. This work reports that these new catalyst architectures are significantly better than nanoporous dilute AgAu alloy catalysts (nanoporous Ag 3 Au 97 ) while retaining a clear predictive relationship between their surface reactivity with that of single-crystal Au surfaces. This paves the way for broadening the range of new catalyst architectures required for translating the designed principles developed under controlled conditions to designed catalysts under operating conditions for highly selective coupling of alcohols to form esters. Excellent catalytic performance of the porous SiO 2 –Ag x Au y structure for selective oxidation of both methanol and ethanol to produce esters with high conversion efficiency, selectivity, and stability was demonstrated, illustrating the ability to translate design principles developed for support-free materials to the colloid-templated structures. The synthetic methodology reported is customizable for the design of a wide range of robust catalytic systems inspired by design principles derived from model studies. Fine control over the composition, morphology, size, distribution, and availability of the supported nanoparticles was discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Inducement of nanoscale Cu–BTC on nanocomposite of PPy–rGO and its performance in ammonia sensing

Highlights: • Formation of nanoscale Cu–BTC was induced on the PPy–rGO composite. • Cu–BTC/PPy–rGO nanocomposite exhibited high surface area and good stability. • Synergistic effect between PPy–rGO and Cu–BTC enhanced gas capture and detection. • Cu–BTC/PPy–rGO-based sensor exhibited excellent sensing performance for NH{sub 3}. - Abstract: In this study, polypyrrole-nanofiber-coated reduced graphene oxide (PPy–rGO) was decorated with nanoparticles of Cu–BTC [Cu{sub 3}(BTC){sub 2}(H{sub 2}O){sub 3}, where BTC is short for benzene-1,3,5-tricarboxylate], a typical metal–organic framework, via a hydrothermal process combined with in situ chemical polymerization. The Cu–BTC nanoparticles enabled gas capture because of their large surface area and high affinity for gases. PPy–rGO induced the formation of nanometer-sized Cu–BTC particles and provided a good platform for gas sensing because of the resulting decorated composite’s good electrical properties. The Cu–BTC/PPy–rGO nanocomposite exhibited good electrical-resistance response to NH{sub 3} at room temperature. Compared to the PPy–rGO thin film, the Cu–BTC/PPy–rGO thin film showed enhanced NH{sub 3}-sensing properties in the form of higher sensitivity and much faster response under the same conditions. The selectivity and stability of the NH{sub 3} sensor based on the Cu–BTC/PPy–rGO nanocomposite were also investigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Cobalt-Doped Tungsten Oxide Nanoparticles for Electrochemical Sensing and Detection of a Penicillin Antibiotic: Amoxicillin

A sensitive electrochemical sensor for the determination of antibacterial amoxicillin (AMXL) in pharmaceutical dosage and environmental samples was developed, since its residues were found in water, food, and biological samples to pose adverse health risks such as immune–allergic reactions and antimicrobial resistance. WO 3 -based sensors are reported to provide higher sensitivity, selectivity, and stability during the electrochemical reaction. Considering this, Co-doped WO 3 nanostructures were synthesized by the hydrothermal method yielding a mixture of nanoparticle and nanorod structures and applied to the assay of AMXL. Extensive characterizations were carried out by SEM, XRD, TEM, and XPS analysis that confirm the monoclinic crystal structure with a uniform Co distribution in the WO 3 lattice. The optimum doping amount of Co in the lattice is found to be 1.80 at %. The electrochemical performance of the Co-WO 3 /carbon paste electrode (CPE) was evaluated for the determination of AMXL under optimum conditions using cyclic voltammetry, electrochemical impedance spectroscopy, and square wave voltammetry. The Co-WO 3 /CPE showed two linear detection ranges at 0.01–0.1 μM with the linear regression I pa = 3.73 [AMXL] + 0.77 with R 2 = 0.96 and at 0.1 to 30.0 μM with the linear regression I pa = 3.76 [AMXL] + 0.69 with R 2 = 0.95. The limit of detection was 9.1 nM (SNR = 3), and the limit of quantification was 30.6 nM (SNR = 10). The sensitivities for lower and higher concentration ranges were 63.22 and 63.73 μA μM –1 cm –2 , respectively. Furthermore, Co-WO 3 /CPE showed high selectivity and anti-interference capabilities. In conclusion, the sensing and disposable Co-WO 3 /CPE sensor showed a great potential for AMXL analysis in spiked soil, water, and Amoxil tablet samples with desirable percentage recovery.

Shanbhag, Mahesh M. [KLE Technological University,↗
DOE OSTI2015

SU-E-J-50: An Evaluation of the Stability of Image Quality Parameters of the Elekta XVI and IView Imaging Systems

Introduction Quality assurance of the image quality for image guided localization systems is crucial to ensure accurate visualization and localization of target volumes. In this study, the long term stability of selected image parameters was assessed and evaluated for CBCT mode, planar radiographic kV mode and MV mode. Methods and Materials: The CATPHAN, QckV-1 and QC-3 phantoms were used to evaluate the image quality parameters. The planar radiographic images were analyzed in PIPSpro™ with spatial resolution (f30, f40, f50) being recorded. For XVI CBCT, Head and Neck Small20 (S20) and Pelvis Medium20 (M20) standard acquisition modes were evaluated for Uniformity, Noise, Spatial Resolution and HU constancy. Dose and kVp for the XVI were recorded using the Unfors RaySafe Xi system with the R/F Low Detector for the kV planar radiographic mode. Results A total of 20 and 10 measurements were acquired for the planar radiographic and CBCT systems respectively over a two month period. Values were normalized to the mean and the standard deviations (STD) were recorded. For the planar radiographic spatial resolution, the STD for f30, f40, f50 were 0.004, 0.002, 0.002 and 0.005, 0.007, 0.008 for the kV and MV, respectively. The average recorded dose for kV was 38.7±2.7 μGy. The STD of the evaluated metrics for the S20 acquisition were: 0.444(f30), 0.067(f40), 0.062(f50), 0.018(Water/poly-HU constancy), 0.028(uniformity) and 0.106(noise). The standard deviations for the M20 acquisition were: 0.108(f30), 0.073(f40), 0.091(f50), 0.008(Water/poly-HU constancy), 0.005(uniformity) and 0.005(noise). Using these, tolerances can be reported as a warning and action threshold of 1σ and 2σ. Conclusion A study was performed to assess the stability of the basic image quality parameters recommended by TG-142 for the Elekta XVI and iView imaging systems. Consistent imaging and dosimetric properties over the evaluated time frame were noted. This work was funded in part by the Cancer Prevention Research Institute of Texas Pre doctoral fellowship training grant (RP140105) to Dennis N. Stanley M.Sc.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2014

SU-E-J-24: An Evaluation of the Stability of Image Quality Parameters of Varian On-Board Imaging (OBI) and EPID Imaging Systems

Purpose: Quality assurance of the image quality for image guided localization systems is crucial to ensure accurate visualization and localization of target volumes. In this study, the long term stability of selected image parameters was assessed and evaluated for CBCT mode, planar radiographic kV mode and the radiographic MV EPID mode. Methods: The CATPHAN, QckV-1 and QC-3 phantoms were used to evaluate the image quality parameters. The planar radiographic images were analyzed in PIPSpro™ with spatial resolution (f30, f40, f50) being recorded. For OBI CBCT, High quality head Full-Fan acquisition and Pelvis Half-Fan acquisition modes were evaluated for Uniformity, Noise, Spatial Resolution, HU constancy and geometric distortion. Dose and kVp for the OBI were recorded using the Unfors RaySafe Xi system with the R/F High Detector for planar kV and the CT detector for CBCT. Dose for the MV EPID was recorded using a PTW975 Semiflex Ion Chamber, PTW Unidos electrometer and SolidWater™. Results: For each metric, values were normalized to the mean and the standard deviations were recorded. For the planar radiographic spatial resolution the f30, f40, f50 were 0.015, 0.008, 0.004 and 0.006, 0.009, 0.018 for the kV and MV, respectively. The standard deviation of the dose for kV was 0.010 and 0.005 for the MV. The standard deviations for Full and half fan were averaged together and the following standard deviations for each metric were recorded: 0.075(uniformity), 0.071(noise), 0.006(AP-Geometric Distortion), 0.005(LAT-Geometric Distortion), 0.058(mean slice thickness), 0.098(f30),0.101(f40),0.124(f50), 0.031(Lung/PMP-HU constancy), 0.063(Water/poly-HU constancy), 0.015(Bone/Derlin-HU constancy),0.006(Dose-Center), 0.004(Dose-Periphery). Using these, tolerances can be reported as a warning and action threshold of 1σ and 2σ. Conclusion: A study was performed to assess the stability of the basic image quality parameters recommended by TG-142 for the Varian OBI and EPID Imaging systems. The two systems show consistent imaging and dosimetric properties over the evaluated time frame.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

Synthesis and characterization of a new family of alkylammonium–chromium phosphates with worm-like morphology

A series of layered alkylammonium–chromium phosphates, formulated as [C{sub n}H{sub 2n+1}NH{sub 3}]Cr(OH)PO{sub 4} (n=2–6), has been synthesized under hydrothermal conditions. The interlayer spacing, increasing linearly with the increase of alkyl-chain length from 13.61 Å (n=2) to 21.20 Å (n=6), is occupied by a double sheet of packed amine molecules with a tilt angle of ca. 51° respect to the inorganic sheet. The powders are constituted by circular plates (diameter=0.5–3 µm, thickness=∼50 nm) with central holes when n=4–6, stacked in axial direction showing worm-like morphologies. The presence of holes, and some corrugated and zig-zag fashions observed on the edge of thin circular plates are the most probable ways for the reduction of the steric tensions between organic and inorganic portions in these hybrid materials. The thermal and thermo-oxidative stability of selected compounds have been studied, including the determination of activation energy data for the decomposition processes. - Graphical abstract: A novel series of layered alkylammonium–chromium phosphates, [C{sub n}H{sub 2n+1}NH{sub 3}]Cr(OH)PO{sub 4} (n=2–6), was obtained and characterized. The interlayer spacing, increasing linearly with the increase of alkyl-chain length, is occupied by a double sheet of packed amine molecules. The powders are constituted by circular plates (diameter=0.5–3 µm, thickness=∼50 nm) with central holes when n=4–6, stacked in axial direction showing worm-like morphologies. - Highlights: • A series of alkylammonium–chromium phosphates has been obtained by the hydrothermal method. • The interlayer spacing increases linearly with the increase of alkyl-chain length. • The interlayer spacing is occupied by a double sheet of packed amine molecules. • The powders are constituted by stacked circular plates showing wormlike morphology. • Thermal behaviour depends on the atmosphere used and the intercalated amine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of Phosphorus Modulation in Iron Single‐Atom Catalysts for Peroxidase Mimicking

Abstract Fe–N–C single‐atom catalysts (SACs) exhibit excellent peroxidase (POD)‐like catalytic activity, owing to their well‐defined isolated iron active sites on the carbon substrate, which effectively mimic the structure of natural peroxidase's active center. To further meet the requirements of diverse biosensing applications, SAC POD‐like activity still needs to be continuously enhanced. Herein, a phosphorus (P) heteroatom is introduced to boost the POD‐like activity of Fe–N–C SACs. A 1D carbon nanowire (FeNCP/NW) catalyst with enriched Fe–N 4 active sites is designed and synthesized, and P atoms are doped in the carbon matrix to affect the Fe center through long‐range interaction. The experimental results show that the P‐doping process can boost the POD‐like activity more than the non‐P‐doped one, with excellent selectivity and stability. The mechanism analysis results show that the introduction of P into SAC can greatly enhance POD‐like activity initially, but its effect becomes insignificant with increasing amount of P. As a proof of concept, FeNCP/NW is employed in an enzyme cascade platform for highly sensitive colorimetric detection of the neurotransmitter acetylcholine.

Ding, Shichao↗
DOE OSTI2024

A General Approach for Metal Nanoparticle Encapsulation Within Porous Oxides

Abstract Encapsulation of metal nanoparticles within oxide materials has been shown as an effective strategy to improve activity, selectivity, and stability in several catalytic applications. Several approaches have been proposed to encapsulate nanoparticles, such as forming core‐shell structures, growing ordered structures (zeolites or metal‐organic frameworks) on nanoparticles, or directly depositing support materials on nanoparticles. Here, a general nanocasting method is demonstrated that can produce diverse encapsulated metal@oxide structures with different compositions (Pt, Pd, Rh) and multiple types of oxides (Al 2 O 3 , Al 2 O 3 ‐CeO 2 , ZrO 2 , ZnZrO x , In 2 O 3 , Mn 2 O 3 , TiO 2 ) while controlling the size and dispersion of nanoparticles and the porous structure of the oxide. Metal@polymer structures are first prepared, and then the oxide precursor is infiltrated into such structures and the resulting material is calcined to form the metal@oxide structures. Most Pt@oxides catalysts show similar catalytic activity, demonstrating the availability of surface Pt sites in the encapsulated structures. However, the Pt@Mn 2 O 3 sample showed much higher CO oxidation activity, while also being stable under aging conditions. This work demonstrated a robust nanocasting method to synthesize metal@oxide structures, which can be utilized in catalysis to finely tune metal‐oxide interfaces.

Zhou, Chengshuang↗
DOE OSTI2022

Carbon Dioxide Capture at Nucleophilic Hydroxide Sites in Oxidation‐Resistant Cyclodextrin‐Based Metal–Organic Frameworks**

Abstract Carbon capture and sequestration (CCS) from industrial point sources and direct air capture are necessary to combat global climate change. A particular challenge faced by amine‐based sorbents—the current leading technology—is poor stability towards O 2 . Here, we demonstrate that CO 2 chemisorption in γ‐cylodextrin‐based metal–organic frameworks (CD‐MOFs) occurs via HCO 3 − formation at nucleophilic OH − sites within the framework pores, rather than via previously proposed pathways. The new framework KHCO 3 CD‐MOF possesses rapid and high‐capacity CO 2 uptake, good thermal, oxidative, and cycling stabilities, and selective CO 2 capture under mixed gas conditions. Because of its low cost and performance under realistic conditions, KHCO 3 CD‐MOF is a promising new platform for CCS. More broadly, our work demonstrates that the encapsulation of reactive OH − sites within a porous framework represents a potentially general strategy for the design of oxidation‐resistant adsorbents for CO 2 capture.

Zick, Mary E.↗
DOE OSTI2022

Carbon Dioxide Capture at Nucleophilic Hydroxide Sites in Oxidation–Resistant Cyclodextrin–Based Metal–Organic Frameworks

Carbon capture and sequestration (CCS) from industrial point sources and direct air capture are necessary to combat global climate change. A particular challenge faced by amine-based sorbents—the current leading technology—is poor stability towards O 2 . Here, we demonstrate that CO 2 chemisorption in γ-cylodextrin-based metal-organic frameworks (CD-MOFs) occurs via HCO 3 – formation at nucleophilic OH – sites within the framework pores, rather than via previously proposed pathways. Here, the new framework KHCO 3 CD-MOF possesses rapid and high-capacity CO 2 uptake, good thermal, oxidative, and cycling stabilities, and selective CO 2 capture under mixed gas conditions. Because of its low cost and performance under realistic conditions, KHCO 3 CD-MOF is a promising new platform for CCS. More broadly, our work demonstrates that the encapsulation of reactive OH – sites within a porous framework represents a potentially general strategy for the design of oxidation-resistant adsorbents for CO 2 capture.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Machine Learning for Computational Heterogeneous Catalysis

Abstract Big data and artificial intelligence has revolutionized science in almost every field – from economics to physics. In the area of materials science and computational heterogeneous catalysis, this revolution has led to the development of scientific data repositories, as well as data mining and machine learning tools to investigate the vast materials space. The goal of using these tools is to establish a deeper understanding of the relations between materials properties and activity, selectivity and stability – the important figures of merit in catalysis. Based on these insights, catalyst design principles can be established, which hopefully lead us to discover highly efficient catalysts to solve pressing issues for a sustainable future and the synthesis of highly functional materials, chemicals and pharmaceuticals. The inherent complexity of catalytic reactions quests for machine learning methods to efficiently navigate through the high‐dimensional hyper‐surfaces in structure optimization problems to determine relevant chemical structures and transition states. In this review, we show how cutting edge data infrastructures and machine learning methods are being used to address problems in computational heterogeneous catalysis.

Schlexer Lamoureux, Philomena↗
DOE OSTI2021

Single Atom Catalysts: A Review of Characterization Methods

Abstract Single atom catalysts (SACs) harbor a potential to exceed nanoparticle catalysts in terms of activity, stability and selectivity in a growing number of chemical reactions. Although their investigation is attracting significant attention, important fundamental questions focusing on key physicochemical properties of SACs (e. g., structure – property relationships, structural dynamics, reaction‐driven restructuring) remain unanswered. A main challenge for research in the field is how to reliably characterize the environments of single atoms in the presence of complicating factors such as low weight loadings, strong metal‐support interactions, and atomic and multiscale heterogeneity of bonding in the single atom sites. This review addresses this challenge – identifying catalytically relevant features of physicochemical properties of single atoms (charge state, electronic structure, atomic configuration, bonding interactions with a support) and surveying advanced tools/methods for characterizing them. The review places a strong emphasis on multimodal methods exploiting X‐ray absorption, emission and photoelectron spectroscopies, and provides several examples from the authors’ research that demonstrate their use as powerful tools for SAC characterization.

Kottwitz, Matthew↗
DOE OSTI2019

Synthesis of Biomass-Derived Ethers for Use as Fuels and Lubricants

Ethers synthesized from biomass-derived compounds have exceptional properties as fuels, lubricants, and specialty chemicals and can serve as replacements for petroleum-derived products. Recent efforts have identified heterogeneous catalysts for the selective synthesis of ethers from alcohols, aldehydes, ketones, furans, esters, olefins, carboxylic acids, and other molecules derived from biomass. This Review highlights the scope of etherification reactions and provides insights into the choice of catalysts and reaction conditions best suited for producing targeted ethers from the available starting materials. First, the properties of ethers for specific applications and the methods by which synthons for ether synthesis can be obtained from biomass are discussed. Then the progress that has been made on the synthesis of ethers via the following methods is summarized: direct etherification of alcohols; reductive etherification of alcohols with aldehydes or ketones; etherification of furanic compounds, esters, and carboxylic acids; and the addition of alcohols to olefins. Next, the mechanisms of these reactions and catalyst properties required to promote them are discussed, with the goal of understanding how reaction conditions can be tuned to optimize catalyst activity and selectivity towards desired ethers. Finally, the Review closes by examining the tradeoffs between catalyst selectivity, activity, stability, and reaction conditions required to achieve the most economically and environmentally favorable routes to biomass-derived ethers.

09 BIOMASS FUELS↗