Search NASA⌕ Search

SEARCH · Search NASA

Results for “stacked substrates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Stacking fault analysis for the early-stages of PVT growth of 4H-SiC crystals

Here, four types of stacking fault formation mechanisms are identified and discussed for early stage PVT growth of 4H-SiC crystals: Type 1: Shockley / double Shockley stacking fault formation inside the facet; Type 2: Stacking fault formation via 2D nucleation; Type 3: Frank + Shockley (S) stacking fault formation due to deflection of threading mixed dislocation (TMD) by macrosteps; Type 4: “Carrot” defect formation related to overgrowth of the terrace formed by separation of 3c/4 and c/4 step risers after deflection of a TMD by vicinal steps. The results help further reduction of defect generation in 4H-SiC substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Large-area epitaxial growth of curvature-stabilized ABC trilayer graphene

The properties of van der Waals (vdW) materials often vary dramatically with the atomic stacking order between layers, but this order can be difficult to control. Trilayer graphene (TLG) stacks in either a semimetallic ABA or a semiconducting ABC configuration with a gate-tunable band gap, but the latter has only been produced by exfoliation. Here we present a chemical vapor deposition approach to TLG growth that yields greatly enhanced fraction and size of ABC domains. The key insight is that substrate curvature can stabilize ABC domains. Controllable ABC yields ~59% were achieved by tailoring substrate curvature levels. ABC fractions remained high after transfer to device substrates, as confirmed by transport measurements revealing the expected tunable ABC band gap. Substrate topography engineering provides a path to large-scale synthesis of epitaxial ABC-TLG and other vdW materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Highly Asymmetric Graphene Layer Doping and Band Structure Manipulation in Rare Earth–Graphene Heterostructure by Targeted Bonding of the Intercalated Gadolinium

Heterostructures consisting of vertically stacked two-dimensional (2D) materials have recently gained large attention due to their highly controllable electronic properties and resulting quantum phases. In contrast to the mechanically stacked multilayered systems, which offer exceptional control over a stacking sequence or interlayer twist angles, the epitaxially grown 2D materials express unprecedented quality and stability over wafer-scale lengths. However, controlling the growth conditions remains a major obstacle toward the formation of complex, epitaxial heterostructures with well-defined electronic properties. Here, we synthesized a trilayer graphene heterostructure on the SiC(0001) substrate with two specific interlayer locations occupied by gadolinium. We applied multitechnique methodology based on low-temperature scanning tunneling microscopy/spectroscopy (STM/S) and angle-resolved photoelectron spectroscopy (ARPES) to determine the intercalant’s locations in the complex, epitaxial graphene heterostructure. Our approach relies on very high quality and large, micrometer-scale homogeneity of the synthesized system. The experimentally determined electronic structure is dominated by the two topmost graphene layers. Overall, our spectroscopic results show quantitative agreement between global ARPES, local STM/S, and density functional theory predictions. The characterized electronic properties primarily reflect highly anisotropic doping levels between the two corresponding graphene layers, which significantly affect the band structure topology. Two pairs of hybridized massive Dirac bands from our initial synthesis–the bilayer graphene on the SiC(0001) substrate–are transformed upon Gd intercalation into two pairs of massless Dirac bands with a new hybridization region in between. Our results open perspectives in the realization of exotic 2D quantum materials via atomically precise synthesis of epitaxial, multilayered graphene–rare earth heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Analysis of native oxides grown on single-crystal CdTe and MgCdTe

Over the course of CdTe photovoltaics development, many refinements to the device stack have been made. One area of current interest is the back contact interface, where surface passivation is critical to prevent recombination at the interface. One candidate material for achieving strong passivation is TeO 2 . Using scanning transmission electron microscopy, we investigate native oxide formations on CdTe and Mg x Cd 1−x Te substrates to better understand the oxides' chemical composition and the interface they form with the material they are grown on. We find that substoichiometric TeO x forms as a native oxide on CdTe, and on Mg x Cd 1−x Te, we found a MgO native oxide. Some TeO x appeared atop the MgO layer, though it was not consistently present. As a result, the native oxides had preferential interface terminations, with Cd terminations at the CdTe/TeO x interface and Te terminations at the Mg x Cd 1−x Te/MgO interface.

14 SOLAR ENERGY↗
DOE OSTI2022

Synergistic Enhancement of Lead and Selenate Uptake at the Barite (001)–Water Interface

The interactions of heavy metals with minerals influence the mobility and bioavailability of toxic elements in natural aqueous environments. The sorption of heavy metals on covalently bonded minerals is generally well described by surface complexation models (SCMs). However, understanding sorption on sparingly soluble minerals is challenging because of the dynamically evolving chemistry of sorbent surfaces. The interpretation can be even more complicated when multiple metal ions compete for sorption. In the present study, we observed synergistically enhanced uptake of lead and selenate on the barite (001) surface through two sorption mechanisms: lattice incorporation that dominates at lower coverages and two-dimensional monolayer growth that dominates at higher coverages. Further, we also observed a systematic increase in the sorption affinity with increasing co-sorbed ion coverages, different from the assumption of invariant binding constants for individual adsorption processes in classical SCMs. Computational simulations showed thermodynamically favorable co-incorporation of lead and selenate by simultaneously substituting for barium and sulfate in neighboring sites, resulting in the formation of molecular clusters that locally match the net dimension of the substrate lattice. These results emphasize the importance of ion–ion interactions at mineral–water interfaces that control the fate and transport of contaminants in the environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Discovery of Self-Assembling π-Conjugated Peptides by Active Learning-Directed Coarse-Grained Molecular Simulation

Electronically active organic molecules have demonstrated great promise as novel soft materials for energy harvesting and transport. Self-assembled nanoaggregates formed from π-conjugated oligopeptides composed of an aromatic core flanked by oligopeptide wings offer emergent optoelectronic properties within a water-soluble and biocompatible substrate. Nanoaggregate properties can be controlled by tuning core chemistry and peptide composition, but the sequence–structure–function relations remain poorly characterized. Here, we employ coarse-grained molecular dynamics simulations within an active learning protocol employing deep representational learning and Bayesian optimization to efficiently identify molecules capable of assembling pseudo-1D nanoaggregates with good stacking of the electronically active π-cores. We consider the DXXX-OPV3-XXXD oligopeptide family, where D is an Asp residue and OPV3 is an oligophenylenevinylene oligomer (1,4-distyrylbenzene), to identify the top performing XXX tripeptides within all 20 3 = 8000 possible sequences. By direct simulation of only 2.3% of this space, we identify molecules predicted to exhibit superior assembly relative to those reported in prior work. Spectral clustering of the top candidates reveals new design rules governing assembly. This work establishes new understanding of DXXX-OPV3-XXXD assembly, identifies promising new candidates for experimental testing, and presents a computational design platform that can be generically extended to other peptide-based and peptide-like systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mixed polytype/polymorph formation in InSe films grown by molecular beam epitaxy on GaAs(111)B

Abstract We report the growth of InSe films on semi-insulating GaAs(111)B substrates by molecular beam epitaxy (MBE). Excellent nucleation behavior resulted in the growth of smooth, single-phase InSe films. The dominant polytype was the targeted γ-InSe. Transmission electron microscopy revealed the presence of three bulk polytypes β, γ, and ε-InSe arranged in nanosized domains, which can be interpreted as sequences of stacking faults and rotational twin boundaries of γ-InSe. Additionally, a centrosymmetric Se-In-In-Se layer polymorph with $P\bar{3}m$ symmetry was identified as typically not present in bulk. Sizeable differences in their electronic properties were found, which resulted in sizeable electronic disorder arising from the nanoscale polytype arrangement that dominated the electronic transport properties. While MBE is a viable synthesis route towards stabilization of InSe polytypes not present in the bulk, an improved understanding to form the targeted polymorph is required to ultimately inscribe a layer sequence on demand utilizing bottom-up synthesis approaches.

ferroelectrics and multiferroics↗
DOE OSTI2022

Chiral superconductivity with enhanced quantized Hall responses in moiré transition metal dichalcogenides

Experimental demonstrations of tunable correlation effects in magic-angle twisted bilayer graphene have put two-dimensional moiré quantum materials at the forefront of condensed-matter research. Other twisted few-layer graphitic structures, boron-nitride, and homo- or hetero-stacks of transition metal dichalcogenides (TMDs) have further enriched the opportunities for analysis and utilization of correlations in these systems. Recent experiments within the latter material class confirmed the relevance of many-body interactions and demonstrated the importance of their extended range. Since the interaction, its range, and the filling can be tuned experimentally by twist angle, substrate engineering and gating, we here explore Fermi surface instabilities and resulting phases of matter of hetero-bilayer TMDs. Using an unbiased renormalization group approach, we establish in particular that hetero-bilayer TMDs are platforms to realize topological superconductivity with winding number |$\mathcal{N}$| = 4. We show that this state reflects in pronounced experimental signatures, such as distinct quantum Hall features.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1995

Weaves as an Interconnection Fabric for ASIM's and Nanosatellites

Many of the micromachines under consideration require computer support, indeed, one of the appeals of this technology is the ability to intermix mechanical, optical, analog, and digital devices on the same substrate. The amount of computer power is rarely an issue, the sticking point is the complexity of the software required to make effective use of these devices. Micromachines are the nano-technologist's equivalent of 'golden screws'. In other words, they will be piece parts in larger assemblages. For example, a nano-satellite may be composed of stacked silicon wafers where each wafer contains hundreds to thousands of micromachines, digital controllers, general purpose computers, memories, and high-speed bus interconnects. Comparatively few of these devices will be custom designed, most will be stock parts selected from libraries and catalogs. The novelty will lie in the interconnections. For example, a digital accelerometer may be a component part in an adaptive suspension, a monitoring element embedded in the wrapper of a package, or a portion of the smart skin of a launch vehicle. In each case, this device must inter-operate with other devices and probes for the purposes of command, control, and communication. We propose a software technology called 'weaves' that will permit large collections of micromachines and their attendant computers to freely intercommunicate while preserving modularity, transparency, and flexibility. Weaves are composed of networks of communicating software components. The network, and the components comprising it, may be changed even while the software, and the devices it controls, are executing. This unusual degree of software plasticity permits micromachines to dynamically adapt the software to changing conditions and allows system engineers to rapidly and inexpensively develop special purpose software by assembling stock software components in custom configurations.

Gorlick, Michael M.↗
DOE OSTI2025

Sputtered ferroelectric aluminum scandium boron nitride (Al 1−x−y B x Sc y N)/ n -GaN heterostructures

This work demonstrates ferroelectric switching in magnetron sputtered Al 1−x−y B x Sc y N/ n -GaN heterostructures. Using high power impulse magnetron sputtering, a silicon doped n -GaN bottom electrode with an electron concentration of 6.0 × 10 19 cm −3 is grown on c-plane sapphire. Al 1−x−y B x Sc y N films are prepared on the GaN surface with Al:B:Sc ratios that produce tensile, lattice matched, or compressive epitaxial strains. X-ray diffraction shows that lattice matched and compressively strained Al 1−x−y B x Sc y N compositions are pseudomorphic, while partial relaxation is observed for tensilely strained Al 1−x−y B x Sc y N/ n -GaN heterostructures. Electrically, the Al 1−x−y B x Sc y N/ n -GaN stacks show robust hysteresis; the P–E loops are fully saturated with both lattice matched and compressively strained Al 1−x−y B x Sc y N compositions exhibiting remanent polarization values of 135 μC/cm 2 . For comparison, Al 1−x−y B x Sc y N films are also prepared on metal organic chemical vapor deposition and single crystal GaN substrates to extend strain and morphology trends to more common substrate types. This report validates that sputter deposition is a feasible technique for fabricating strain-tunable ferroelectric III–N heterostructures with high crystalline fidelity and smooth surface morphologies.

42 ENGINEERING↗
DOE OSTI2020

Combinatorial Study of MZO Emitters for CdTe-Based Solar Cells

Precise band alignment at the front interface of CdTe-based solar cells is necessary to reduce photoexcited charge carrier recombination and to enable higher energy conversion efficiencies. Magnesium zinc oxide is not only transparent but also offers the ability to tune the conduction band offset with CdTe at the front of the device stack. In this work, we describe reactive sputtering of Mg 1-x Zn x O using metal targets and its application in CdTe photovoltaics. Combinatorial libraries of Mg 1-x Zn x O were created to tune the conduction band alignment for the optimal performance of CdTe solar cells. Band gap variation of more than 0.4 eV is achieved across a 3-inch substrate. Kelvin probe measurements demonstrate variance of work function across the substrate. Device performance is optimized at band gaps of 3.5 eV for the CdTe device processing conditions employed in this study.

14 SOLAR ENERGY↗
DOE OSTI2025

Monocrystalline CdSeTe/MgCdTe Double‐Heterostructure Solar Cells

This article reports monocrystalline CdSeTe/MgCdTe double‐heterostructure (DH) solar cells with varying Se compositions in the absorber layers that are grown on InSb substrates by using molecular beam epitaxy. The Se composition in the samples studied is determined to be 4%–11% through high‐resolution X‐ray diffraction (XRD) and photoluminescence measurements. Increased Se incorporation induces higher defect density attributed to increased lattice mismatch, and mixed‐phase formation due to the small difference in formation energies between the wurtzite and zinc blende phases of CdSe, which causes stacking faults and grain boundaries. Devices are fabricated by directly depositing an n‐type indium tin oxide (ITO) layer on the CdSeTe/MgCdTe DHs followed by Ag metal contacts. Reduced bandgap is observed in solar cells with increased Se composition. The devices with an absorber containing 4% Se exhibit an average open‐circuit voltage ( V OC ) of 0.925 V, a short‐circuit current density ( J SC ) of 23.4 mA/cm 2 , a fill factor ( FF ) of 0.650 and an efficiency of 14.1% without anti‐reflection coating. Absorbers with higher Se compositions result in poor device performance, mainly attributed to high defect density in the materials.

Ju, Zheng [Center for Photonics Innovation Arizona↗
DOE OSTI2022

A novel hardmask-to-substrate pattern transfer method for creating 3D, multi-level, hierarchical, high aspect-ratio structures for applications in microfluidics and cooling technologies

Abstract This letter solves a major hurdle that mars photolithography-based fabrication of micro-mesoscale structures in silicon. Conventional photolithography is usually performed on smooth, flat wafer surfaces to lay a 2D design and subsequently etch it to create single-level features. It is, however, unable to process non-flat surfaces or already etched wafers and create more than one level in the structure. In this study, we have described a novel cleanroom-based process flow that allows for easy creation of such multi-level, hierarchical 3D structures in a substrate. This is achieved by introducing an ultra-thin sacrificial silicon dioxide hardmask layer on the substrate which is first 3D patterned via multiple rounds of lithography. This 3D pattern is then scaled vertically by a factor of 200–300 and transferred to the substrate underneath via a single shot deep etching step. The proposed method is also easily characterizable—using features of different topographies and dimensions, the etch rates and selectivities were quantified; this characterization information was later used while fabricating specific target structures. Furthermore, this study comprehensively compares the novel pattern transfer technique to already existing methods of creating multi-level structures, like grayscale lithography and chip stacking. The proposed process was found to be cheaper, faster, and easier to standardize compared to other methods—this made the overall process more reliable and repeatable. We hope it will encourage more research into hybrid structures that hold the key to dramatic performance improvements in several micro-mesoscale devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Arbitrary Low-Dimensional Film Transfer Enabled by GeO 2 Release Layer

Low-dimensional materials show great promise for enhanced computing and sensing performance in mission-relevant environments. However, integrating low-dimensional materials into conventional electronics remains a challenge. Here, we demonstrate a novel transfer method by which low-dimensional materials and their heterostructures can be transferred onto any arbitrary substrate. Our method relies on a water soluble GeO 2 substrate from which lowdimensional materials are transferred without significant perturbation. We apply the method to transfer a working electronic device based on a low-dimensional material. Process developments are achieved to enable the fabrication and transfer of a working electronic device, including the growth of high-k dielectric on GeO 2 by atomic layer deposition and inserting an indium diffusion barrier into the device gate stack. This work supports Sandia’s heterogeneous integration strategy to broaden the implementation of low-dimensional films and their devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Reduced-temperature sintering of spinel-type coatings and layers with metallic alloy powder precursors

A method of forming a spinel coating on a substrate is disclosed including the steps of coating at least a portion of the substrate with a precursor including an alloy powder, and sintering the precursor at a temperature of less than 1000 degrees Celsius to form the spinel coating. The alloy powder used for the precursor can include particles having a particle size of less than 10 micrometers. The method can be utilized to form spinel coatings as contact surfaces between electrodes and interconnects of solid oxide fuel cell (SOFC) stacks.

Zhu, Jiahong↗
DOE OSTI2024

Waveguide including a conductive channel embedded in a substrate and with vias connected to an antenna and a circuit component

Waveguides and methods for manufacturing a waveguide that include forming a first channel in a first layer of dielectric material, the first channel comprising one or more walls; forming a second channel in a second layer of dielectric material, the second channel comprising one or more walls; depositing electrically conductive material on the one or more walls of the first channel; depositing electrically conductive material on the one or more walls of the second channel; arranging the first layer adjacent to the second layer to form a stack with the first channel axially aligned with and facing the second channel; and heating the stack so that the conductive material on the one or more walls of the first channel and the conductive material on the one or more walls of the second channel connect to form the waveguide.

Krueger, Daniel Scott↗
DOE OSTI2020

Defect-Seeded Atomic Layer Deposition of Metal Oxides on the Basal Plane of 2D Layered Materials

Atomic layer deposition (ALD) on mechanically exfoliated 2D layered materials spontaneously produces network patterns of metal oxide nanoparticles in triangular and linear deposits on the basal surface. The network patterns formed under a range of ALD conditions and were independent of the orientation of the substrate in the ALD reactor. The patterns were produced on MoS 2 or HOPG when either tetrakis(dimethylamido)titanium or bis(ethylcyclopentadienyl)manganese were used as precursors, suggesting that the phenomenon is general for 2D materials. Transmission electron microscopy revealed the presence, prior to deposition, of dislocation networks along the basal plane of mechanically exfoliated 2D flakes, indicating that periodical basal plane defects related to disruptions in the van der Waals stacking of layers, such as perfect line dislocations and triangular extended stacking faults networks, introduce a surface reactivity landscape that leads to the emergence of patterned deposition.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Vacuum MOCVD fabrication of high efficience cells

Vacuum metal-organic-chemical-vapor-deposition (MOCVD) is a new fabrication process with improved safety and easier scalability due to its metal rather than glass construction and its uniform multiport gas injection system. It uses source materials more efficiently than other methods because the vacuum molecular flow conditions allow the high sticking coefficient reactants to reach the substrates as undeflected molecular beams and the hot chamber walls cause the low sticking coefficient reactants to bounce off the walls and interact with the substrates many times. This high source utilization reduces the materials costs power device and substantially decreases the amounts of toxic materials that must be handled as process effluents. The molecular beams allow precise growth control. With improved source purifications, vacuum MOCVD has provided p GaAs layers with 10-micron minority carrier diffusion lengths and GaAs and GaAsSb solar cells with 20% AMO efficiencies at 59X and 99X sunlight concentration ratios. Mechanical stacking has been identified as the quickest, most direct and logical path to stacked multiple-junction solar cells that perform better than the best single-junction devices. The mechanical stack is configured for immediate use in solar arrays and allows interconnections that improve the system end-of-life performance in space.

Partain, L. D.↗