Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Formation of ion damage tracks

A new model is proposed to explain both localized damage regions and preferential etching of damage tracks caused by the passage of energetic ions in insulators. The formation of each region of extended defects is initiated by the Auger decay of a vacancy produced in an inner electronic shell of an atom of the insulator by an incident ion. This decay produces an intense source of ionization within a small volume around the decaying atom, which causes decomposition of the material in a manner similar to that observed in pulsed laser irradiation. The resulting chemical or crystalline modification of the material is the latent track, which can be preferentially etched due to its changed structure.

Tombrello, T. A.↗

Microstructural design in low alloy steels

The evolution of microalloyed steels from plain carbon steels is examined with emphasis on grain size control by use of Nb, Ti and V additions and by the application of controlled rolling. The structural changes during controlled rolling are described as well as the influence of alloying elements on these changes, and on the final microstructure. The achievement of high strength and toughness is discussed including the role of inclusions.

Honeycombe, R. W. K.↗

Shock-induced CO2 loss from CaCO3: Implications for early planetary atmospheres

Recovered samples from shock recovery experiments on single crystal calcite were subjected to thermogravimetric analysis to determine the amount of post-shock CO2, the decarbonization interval and the activation energy, for the removal of remaining CO2 in shock-loaded calcite. Comparison of post-shock CO2 with that initially present determines shock-induced CO2 loss as a function of shock pressure. Incipient to complete CO2 loss occurs over a pressure range of approximately 10 to approximately 70 GPa. Optical and scanning electron microscopy reveal structural changes, which are related to the shock-loading. The occurrence of dark, diffuse areas, which can be resolved as highly vesicular areas as observed with a scanning electron microscope are interpreted as representing quenched partial melts, into which shock-released CO2 was injected. The experimental results are used to constrain models of shock-produced, primary CO2 atmospheres on the accreting terrestrial planets.

Lange, M. A.↗

On reversion phenomena in Cu-Zr-Cr alloys

Reversion phenomena in aged Cu-0.12% Zr-0.28% Cr alloy were investigated by means of resistivity measurement and transmission electron microscopy and compared with those of Cu-0.30% Zr and Cu-0.26% Cr alloys. Specimens in the form of a 0.5 mm sheet were solution-treated at 950 F for 1 hr water-quenched, aged, and finally reversed. The reversion phenomena were confirmed to exist in Cu-Zr and Cu-Zr-Cr alloys as well as Cu-Cr alloys, at aging temperatures of 300 to 500 F. The critical aging temperature for the reversion was not observed in all the alloys. Split aging increased the amount of reversion, particularly in Cu-Zr and Cu-Zr-Cr alloys, compared with that by conventional aging. The amount of reversion in Cu-Zr-Cr alloy was greatly affected by the resolution of Cr precipitate formed by preaging. Structural changes in Cu-Zr-Cr alloy due to the reversion were hardly observed by transmission electron microscopy.

Suzuki, H.↗

Image Quality on the KAO

Three flights of the Kuiper Airborne Observatory (KAO) were taken to study the cause of the point spread function (PSF) degradation. The preliminary conclusions are: (1) the KAO point spread function decreases in size with elapsed time at altitude; (2) image motion is occasionally comparable to the size of the image, but is usually a sub-arcsecond effect; and (3) star images show small scale internal structural changes on a 200 microsecond timescale.

Dunham, E. W.↗

Seasonal Characteristics of Mesospheric Plasma and Their Transitions

The main seasonal features of the middle atmosphere are arising from the different dynamical basic states in winter and summer. The development of the two controversial circulation systems and the also different peculiarities of transition between them in spring and autumn create the completely dominant seasonal variations in strato- and mesosphere. Even in the plasma structures of the mesospheric D-region the seasonal variation is towering above the amplitudes of extraterrestrial influences. From standard ionospheric sounding, significant seasonal D- and E-region effects, adhering to equally significant structure changes in the neutral gas in the height region from 20 to 100 km were discovered. Results about such typical seasonal features are summarized.

Lauter, E. A.↗

An Idealized Short Period Comet Model: Surface Insolation, H2O Flux, Dust Flux and Mantle Evolution

The present cometary activity model integrates feedback processes that involve the transport of heat, gas, and dust, as well as dust mantle development, and includes the effects of latitude, rotation, and spin orientation. Attention is given to the development, structural change, and distribution of dust mantles and their mutual interaction with ice surface temperature and gas and dust production. The results obtained suggest that an initially homogeneous, short period comet with a cosmic dust to water ice ratio, as well as typical orbit, rotation rate, and grain size distribution, would develop only a thin, less than 1 mm cyclic mantle at all points on the nucleus. Most H2O dust histories deduced from brightness data are noted to be in reasonable agreement with the model, allowing for uncertainty in radius and albedo. The exceptional case of Comet Encke is discussed.

Fanale, F. P.↗

EVA-glass interface bond stability

The ethylene vinyl acetate/glass interface bond stability was investigated. Special methods to determine the structure of polymer/glass interface were developed. Structural changes related to hydrothermal degradation of polymer/glass interface are examined. Methods to inhibit the degradation reaction which occur at polymer/glass interface are developed.

Koenig, J. L.↗

Two dimensional blade-vortex interaction flow visualization study

Blade-vortex interaction occurs when a rotor blade encounters the tip vortex from a previous rotor blade. To obtain details of the close encounter process, the results from a flow visualization study of an airfoil representing a rotor blade in the wake of an oscillating airfoil serving as a vortex generator are described. A distinguishing feature of this study is that the vortex filament is oriented parallel to the blade span, orthogonal to the test section free stream velocity. This orientation simulates the case of two-dimensional blade-vortex interaction, which is known to produce the most impulsive and most intensive BVI noise. Photographic data are examined to deduce qualitative and quantitative details of the close encounter interaction process with emphasis on structural changes in the vortex filament and its trajectory.

Booth, E. R., Jr.↗

An idealized short-period comet model - Surface insolation, H2O flux, dust flux, and mantle evolution

The present cometary activity model integrates feedback processes that involve the transport of heat, gas, and dust, as well as dust mantle development, and includes the effects of latitude, rotation, and spin axis orientation. Attention is given to the development, structural change, and distribution of dust mantles and their mutual interaction with ice surface temperature and gas and dust production. The results obtained suggest that an initially homogeneous, short period comet with a cosmic dust-to-water ice ratio, as well as typical orbit, rotation rate, and grain size distribution, would develop only a thin, less than 1 mm cyclic mantle at all points on the nucleus. Most H2O dust histories deduced from brightness data are noted to be in reasonable agreement with the model, allowing for uncertainty in radius and albedo. The exceptional case of Comet Encke is discussed.

Fanale, F. P.↗

Ion-beam nitriding of steels

The application of the ion beam technique to the nitriding of steels is described. It is indicated that the technique can be successfully applied to nitriding. Some of the structural changes obtained by this technique are similar to those obtained by ion nitriding. The main difference is the absence of the iron nitride diffraction lines. It is found that the dependence of the resultant microhardness on beam voltage for super nitralloy is different from that of 304 stainless steel.

Salik, J.↗

A case study in R and D productivity: Helping the program manager cope with job stress and improve communication effectiveness

Certain structural changes in the Naval Material Command which resulted from a comparison of its operations to those of selected large-scale private sector companies are described. Central to the change was a reduction in the number of formal reports from systems commands to headquarters, and the provision of Program Management Assistance Teams (at the request of the program manager) to help resolve project problems. It is believed that these changes improved communication and information-processing, reduced program manager stress, and resulted in improved productivity.

Bodensteiner, W. D.↗

Information flow and work productivity through integrated information technology

The work environment surrounding integrated office systems is reviewed. The known effects of automated office technologies is synthesized and their known impact on work efficiency is reviewed. These effects are explored with regard to their impact on networks, work flow/processes, as well as organizational structure and power. Particular emphasis is given to structural changes due to the introduction of newer information technologies in organizations. The new information technologies have restructed the average organization's middle banks and, as a consequence, they have shrunk drastically. Organizational pyramids have flattened with fewer levels since executives have realized that they can get ahold of the needed information via the new technologies quicker and directly and do not have to rely on middle-level managers. Power shifts are typically accompanied with the introduction of these technologies resulting in the generation of a new form of organizational power.

Wigand, R. T.↗

The preparation and archiving of machine-readable astronomical data

The preparation of machine-readable astronomical catalogs for archiving and distribution from the ADC is described. Examples of specific format and data structure changes to improve compatibility with other computers, to homogenize the presentation of astronomical data among catalogs, and to increase storage efficiency are given. Various checks which are often made to insure internal consistency and for comparison with published versions are identified and the importance of permanently archiving astronomical data in the best possible condition is emphasized.

Warren, W. H., Jr.↗

Shock-induced CO2 loss from CaCO3 - Implications for early planetary atmospheres

Recovered samples from shock recovery experiments on single crystal calcite were subjected to thermogravimetric analysis to determine the amount of post-shock CO2, the decarbonization interval and the activation energy, for the removal of remaining CO2 in shock-loaded calcite. Comparison of post-shock CO2 with that initially present determines shock-induced CO2 loss as a function of shock pressure. Incipient to complete CO2 loss occurs over a pressure range of approximately 10 to approximately 70 GPa. Optical and scanning electron microscopy reveal structural changes which are related to the shock-loading. The occurrence of dark, diffuse areas, which can be resolved as highly vesticular areas as observed with a scanning electron microscope are interpreted as representing quenched partial melts, into which shock-released CO2 was injected. The experimental results are used to constrain models of shock-produced, primary CO2 atmospheres on the accreting terrestrial planets.

Lange, M. A.↗

Nuclear lamins and peripheral nuclear antigens during fertilization and embryogenesis in mice and sea urchins

Nuclear structural changes during fertilization and embryogenesis in mice and sea urchins are traced using four antibodies. The oocytes from virgin female mice, morulae and blastocytes from mated females, and gametes from the sea urchin Lytechnius variegatis are studied using mouse monoclonal antibodies to nuclear lamin A/C, monoclonal antibody to P1, human autoimmune antibodies to lamin A/C, and to lamin B. The mouse fertilization data reveal no lamins on the oocyte; however, lamins are present on the pronuclei, and chromosomes are found on the oocytes and pronuclei. It is detected that on the sea urchin sperm the lamins are reduced to acrosomal and centriolar fossae and peripheral antigens are around the sperm nucleus. The mouse sperm bind lamin antibodies regionally and do not contain antigens. Lamins and antigens are observed on both pronuclei and chromosomes during sea urchin fertilization. Mouse embryogenesis reveals that lamin A/C is not recognized at morula and blastocyst stages; however, lamin B stains are retained. In sea urchin embryogenesis lamin recognition is lost at the blastrula, gastrula, and plutei stages. It is noted that nuclear lamins lost during spermatogenesis are restored at fertilization and peripheral antigens are associated with the surface of chromosomes during meiosis and mitosis and with the periphery of the pronuclei and nuclei during interphase.

Schatten, G.↗

Thermal conductivity of pristine and brominated P-100 fibers

Thermal conductivity of brominated and pristine Union Carbide P-100 graphite fibers in the 30 to 160 C temperature range was determined by measuring thermal conductivities of graphite fiber epoxy composite samples and then excluding the epoxy contribution. A comparative thermal conductivity instrument was used to measure the thermal conductivity of the samples containing fibers. Results showed that the thermal conductivity values were 225 to 370 w/m-K and 215 to 340 w/m-K for pristine and brominated fibers, respectively. Furthermore, the thermal conductivity ratio of brominated to pristine P-100 fibers was 0.89, 0.91, and 0.92 at 55 to 80 C; 108 and 130 C, respectively. Such decrease in thermal conductivity results almost entirely from the 10 percent increase in fiber cross sectional area due to bromination. This result suggests that bromination effects on P-100 fiber structure is small, and that some structural changes, presumably the sharp-angled domain wall becomes less sharp, occurring in the 80 to 108 C temperature range.

Hung, C. C.↗

Aspects of the 40-50 day oscillation during the northern summer as inferred from outgoing longwave radiation

The intraseasonal variability (ISV) of tropical convection during the northern summer and its connection with the monsoon over India and east Asia is studied from a planetary-scale perspective. A 40-50 day oscillation consisting primarily of an east-west oriented dipole with centers located over the Indian Ocean/Subcontinent and the western Pacific is shown to be an important component of the ISV of tropical convection during summer. Over these regions, the oscillation undergoes complex structural changes which are manifested in simultaneous cloudiness propagation eastward along the equator from the eastern Indian Ocean to the western Pacific, northward from the Indian Ocean into the Subcontinent, and northwestward from the equatorial western Pacific to the South China Sea. The oscillation is also found to be phase-locked to the monsoon onset of India, the Mei-yu regime over South China, and, in general, the seasonal variation of convection over the equatorial Indian-West Pacific Ocean.

Lau, K.-M.↗