Search NASA⌕ Search

SEARCH · Search NASA

Results for “superstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Hydropower Geotechnical Foundations: Current Practice and Innovation Opportunities for Low-Head Applications

Hydropower is a renewable energy resource that produces electricity from flowing water under pressure. Engineered hydropower structures, such as dams, are used to create a hydraulic head, enabling a turbinegenerator unit to convert pressurized flow into electricity. While hydropower has been a source of renewable energy since antiquity, new development in the United States has slowed in recent decades. Based on recent resource assessments, the largest opportunity to expand hydropower in the United States is from new stream-reach development (i.e., new hydropower development along stream-reaches that do not currently have hydroelectric facilities or other forms of infrastructure, such as dams). Roughly 75% of identified new stream-reach development potential is from low-head sites (less than 30 ft of head), which typically suffer from smaller power densities and higher normalized costs, given economies of scale. Hydropower developers and other stakeholders are thus interested in strategies to reduce initial capital costs while practicing sustainable development to maximize environmental compatibility with minimal disruption to natural aquatic life, sediment, and water flows. Historically, civil works have represented a significant cost driver for new hydropower development, with the foundation system representing a major cost component and source of uncertainty. The foundation system is the collection of engineered structural features (e.g. cutoff trenches, walls, grouting, anchors) constructed at or below the preconstruction ground surface that interfaces between the overlying structures (superstructures) and the bed material below (subsurface). Development of a hydropower foundation system must consider the various characteristics of the surrounding stream environment and subsurface while adhering to the engineering requirements of the superstructure that it supports. The care of water, excavation, and other construction activities are important features of foundation design and construction. The design and construction cost of the foundation system is largely dependent on the site geology and riverbed composition and is influenced by the level of geotechnical assessment required and conducted. Thus, a hydropower facility’s geotechnical foundation is often highly site-specific, with proper site selection and assessment being important to project success. The foundation system is designed to provide structural stability (of the foundation and dam), limit seepage, ensure public safety, and maintain functionality for the project life, during both construction and facility operations. Inadequate foundation or dam design can result in dam failure and the uncontrolled release of significant volumes of water, which could cause a high number of casualties and extensive property damage downstream of the failure. According to the Association of State Dam Safety Officials, approximately 30% of all historical dam failures in the United States are attributed to foundation or abutment defects, and another 20% are attributed to piping or seepage through the embankment, foundation, or abutment. To ameliorate these safety considerations, foundations often require massive amounts of construction material (e.g., grout, concrete, engineered dam fill) and long construction times. Foundation design also requires significant analysis prior to construction because the initial in-stream and abutment subsurface conditions are site-specific, and sufficient data for them often are lacking. Current practice requires on-site assessment, using expensive drilling and invasive and non-invasive investigation methods, to determine the expected cost of foundation material and treatment. Additionally, foundation construction often requires site dewatering (and other care of water activities), which involves constructing temporary diversion structures upstream and often downstream, called cofferdams, and water diversion systems that route water around the construction site. Cofferdams and water diversion systems can drastically increase construction costs and contribute to environmental disruption, including modification of flow patterns and benthic habitats. Given the technical, economic, and environmental challenges associated with hydropower foundations, opportunities exist to improve the current state of practice and to develop new and innovative solutions to Hydropower is a renewable energy resource that produces electricity from flowing water under pressure. Engineered hydropower structures, such as dams, are used to create a hydraulic head, enabling a turbinegenerator unit to convert pressurized flow into electricity. While hydropower has been a source of renewable energy since antiquity, new development in the United States has slowed in recent decades. Based on recent resource assessments, the largest opportunity to expand hydropower in the United States is from new stream-reach development (i.e., new hydropower development along stream-reaches that do not currently have hydroelectric facilities or other forms of infrastructure, such as dams). Roughly 75% of identified new stream-reach development potential is from low-head sites (less than 30 ft of head), which typically suffer from smaller power densities and higher normalized costs, given economies of scale. Hydropower developers and other stakeholders are thus interested in strategies to reduce initial capital costs while practicing sustainable development to maximize environmental compatibility with minimal disruption to natural aquatic life, sediment, and water flows. Historically, civil works have represented a significant cost driver for new hydropower development, with the foundation system representing a major cost component and source of uncertainty. The foundation system is the collection of engineered structural features (e.g. cutoff trenches, walls, grouting, anchors) constructed at or below the preconstruction ground surface that interfaces between the overlying structures (superstructures) and the bed material below (subsurface). Development of a hydropower foundation system must consider the various characteristics of the surrounding stream environment and subsurface while adhering to the engineering requirements of the superstructure that it supports. The care of water, excavation, and other construction activities are important features of foundation design and construction. The design and construction cost of the foundation system is largely dependent on the site geology and riverbed composition and is influenced by the level of geotechnical assessment required and conducted. Thus, a hydropower facility’s geotechnical foundation is often highly site-specific, with proper site selection and assessment being important to project success. The foundation system is designed to provide structural stability (of the foundation and dam), limit seepage, ensure public safety, and maintain functionality for the project life, during both construction and facility operations. Inadequate foundation or dam design can result in dam failure and the uncontrolled release of significant volumes of water, which could cause a high number of casualties and extensive property damage downstream of the failure. According to the Association of State Dam Safety Officials, approximately 30% of all historical dam failures in the United States are attributed to foundation or abutment defects, and another 20% are attributed to piping or seepage through the embankment, foundation, or abutment. To ameliorate these safety considerations, foundations often require massive amounts of construction material (e.g., grout, concrete, engineered dam fill) and long construction times. Foundation design also requires significant analysis prior to construction because the initial in-stream and abutment subsurface conditions are site-specific, and sufficient data for them often are lacking. Current practice requires on-site assessment, using expensive drilling and invasive and non-invasive investigation methods, to determine the expected cost of foundation material and treatment. Additionally, foundation construction often requires site dewatering (and other care of water activities), which involves constructing temporary diversion structures upstream and often downstream, called cofferdams, and water diversion systems that route water around the construction site. Cofferdams and water diversion systems can drastically increase construction costs and contribute to environmental disruption, including modification of flow patterns and benthic habitats. Given the technical, economic, and environmental challenges associated with hydropower foundations, opportunities exist to improve the current state of practice and to develop new and innovative solutions to challenges frequently encountered with traditional approaches. With this understanding, it is critically important to understand and document the current state of practice for hydropower geotechnical foundations, identify key challenges, and define opportunities for innovative solutions. To this end, this report documents the current state of practice across the three main phases of geotechnical foundation development: (1) geotechnical site assessment, (2) design, and (3) construction for hydropower systems. It also describes the major challenges with conventional approaches and identifies opportunities for innovation to reduce hydropower foundations costs, timelines, and risks. Key takeaways from this report include the following: Approximately 80% of available low-head sites are expected to have foundations on soil beds rather than rock beds, suggesting that rockfill and earthfill dams may be the most cost-effective conventional dam type for new projects.; Geotechnical and geologic investigation activities are time-consuming and expensive but are essential to define the parameters and criteria needed for foundation design.; Certain riverbed soil and bedrock types present significant technical challenges or require expensive foundation construction, which can prove financially prohibitive for low-head project development.; Modular hydropower design and prefabricated modular foundations represent a promising but unproven paradigm for new hydropower development. Design and construction approaches using optimized and highly repeatable, reliable components would benefit project cost, time, and risk but require additional research and development.; Temporary construction features for foundations, including cofferdams, water diversion, and water control systems, can prove costly and have inherent construction risk.; For economically viable development, hydropower geotechnical foundations should be limited to 4 to 15% of the project’s total initial capital costs. Many proposed projects have experienced cost overruns attributable to foundation difficulties or surprises during construction. These overruns may have been due to inadequate investigations, lack of adequate engineering effort to tailor the structures to site geology and topography, and/or contractual terms, among other considerations.; Challenges for hydropower foundations and opportunities for innovative technology solutions are identified in the following areas (consistent with the three main phases of foundation development): Geotechnical site assessment, Foundation design and materials, Construction methods and technology. Ultimately, this report aims to provide information about geotechnical foundations for low-head hydropower and to motivate transformative technologies to support hydropower growth.

13 HYDRO ENERGY↗

Modeling Interactions within and between Peptide Amphiphile Supramolecular Filaments

Many peptides are able to self-assemble into one-dimensional (1D) nanostructures, such as cylindrical fibers or ribbons of variable widths, but the relationship between the morphology of 1D objects and their molecular structure is not well understood. Here, we use coarse-grained molecular dynamics (CG-MD) simulations to study the nanostructures formed by self-assembly of different peptide amphiphiles (PAs). The results show that ribbons are hierarchical superstructures formed by laterally assembled cylindrical fibers. Simulations starting from bilayer structures demonstrate the formation of filaments, whereas other simulations starting from filaments indicate varying degrees of interaction among them depending on chemical structure. These interactions are verified by observations using atomic force microscopy of the various systems. The interfilament interactions are predicted to be strongest in supramolecular assemblies that display hydrophilic groups on their surfaces, while those with hydrophobic ones are predicted to interact more weakly as confirmed by viscosity measurements. The simulations also suggest that peptide amphiphiles with hydrophobic termini bend to reduce their interfacial energy with water, which may explain why these systems do not collapse into superstructures of bundled filaments. The simulations suggest that future experiments will need to address mechanistic questions about the self-assembly of these systems into hierarchical structures, namely, the preformation of interactive filaments vs equilibration of large assemblies into superstructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Transformation Pathways of Multiferroic BiFeO 3 under High Pressures

High-pressure phase transitions in multiferroic BiFeO 3 have been investigated by synchrotron radiation X-ray diffraction up to ~54 GPa at room temperature. BiFeO 3 exhibits a complex structural behavior under high pressures. Four phase transitions with the phase sequence R3c → OI and OIII → OI → Pnma → Pnm2 1 were observed at ~3, ~6, ~12, and ~45 GPa, respectively. Because of octahedral tilts and cation displacements under high pressures, BiFeO 3 presents large unit cells and complex superstructures or domain structures between the stable R3c and Pnma phases. The OI and OIII phases have superstructure lattices √2a pc x 3√2b pc x c pc and √2a pc x 2√2b pc x 2c pc , respectively, and the OIII phase is isostructural with antiferroelectric PbZrO 3 (space group: Pbam). Here, the Pnma → Pnm2 1 transition at ~45 GPa indicates the occurrence of a large unit cell and an increase of the structural distortion. The Pnm2 1 phase with a superstructure lattice 2√2a pc x 2b pc x √2c pc has a group–subgroup relation with the Pnma phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-assembly of Janus Dumbbell Nanocrystals and Their Enhanced Surface Plasmon Resonance

Self-assembly is a critical process that can greatly expand the existing structures and lead to new functionality of nanoparticle systems. Multicomponent superstructures self-assembled from nanocrystals have shown promise as multifunctional materials for various applications. Despite recent progress in assembly of homogeneous nanocrystals, synthesis and self-assembly of Janus nanocrystals with contrasting surface chemistry remains a significant challenge. Herein, we designed a novel Janus nanocrystal platform to control the self-assembly of nanoparticles in aqueous solutions by balancing the hydrophobic and hydrophilic moieties. A series of superstructures have been assembled by systematically varying the Janus balance and assembly conditions. Janus Au–Fe 3 O 4 dumbbell nanocrystals (<20 nm) were synthesized with the hydrophobic ligands coated on the Au lobe and negatively charged hydrophilic ligands coated on the Fe 3 O 4 lobe. We systematically fine-tune the lobe size ratio, surface coating, external conditions, and even additional growth of Au nanocrystal domains on the Au lobe of dumbbell nanoparticles (Au–Au–Fe 3 O 4 ) to harvest self-assembly structures including clusters, chains, vesicles, and capsules. It was discovered that in all these assemblies the hydrophobic Au lobes preferred to stay together. In addition, these superstructures clearly demonstrated different levels of enhanced surface plasmon resonance that is directly correlated with the Au coupling in the assembly structure. The strong interparticle plasmonic coupling displayed a red-shift in surface plasmon resonance, with larger structures formed by Au–Au–Fe 3 O 4 assembly extending into the near-infrared region. Self-assembly of Janus dumbbell nanocrystals can also be reversible under different pH values. In conclusion, the biphasic Janus dumbbell nanocrystals offer a platform for studying the novel interparticle coupling and open up opportunities in applications including sensing, disease diagnoses, and therapy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Oriented gold nanorod arrays: self-assembly and optoelectronic applications

We present that self-assembly of anisotropic plasmonic nanomaterials into ordered superstructures has become popular in nanoscience because of their unique anisotropic optical and electronic properties. Gold nanorods (GNRs) are a well-defined functional building block for fabrication of these superstructures. They possess important anisotropic plasmonic characteristics that are resulted from strong local electric field and responsive to visible and near infrared light, which attracts extensive attention in various fields, such as biomedical technologies, plasmon-enhanced spectroscopies, and optoelectronic devices. There are recent examples of assembling the GNRs into ordered arrays or superstructures through processes such as solvent evaporation, interfacial assembly. In this review, we describe recent progresses in the development of the self-assembled GNR arrays with focus on the formation of oriented GNR arrays on substrates. We discuss key driving forces such as van der Waals (vdW), electrostatic interactions, steric force, and depletion force. We survey different strategies and self-assembly processes of forming oriented GNR arrays. Lastly, we also overview the applications of the oriented GNR arrays in optoelectronic devices especially surface enhanced Raman scattering (SERS). At the end of this review, we briefly summarize the review and discuss future challenges and perspectives.

36 MATERIALS SCIENCE↗

Modified Dirac Fermions in the Crystalline Xenon and Graphene Moiré Heterostructure

Abstract The interface between two‐dimensional (2D) crystals often forms a Moiré superstructure that imposes a new periodicity, which is a key element in realizing complex electronic phases as evidenced in twisted bilayer graphene. Acombined angle‐resolved photoemission spectroscopy measurements and first‐principles calculations reveal the formation of a Moiré superstructure between a 2D Dirac semi‐metallic crystal, graphene, and a 2D insulating crystal of noble gas, xenon. Incommensurate diffraction pattern and folded Dirac cones around the Brillouin zone center imply the formation of hexagonal crystalline array of xenon atoms. The velocity of Dirac fermions increases upon the formation of the 2D xenon crystal on top of graphene due to the enhanced dielectric screening by the xenon over‐layer. These findings not only provide a novel method to produce a Moiré superstructure from the adsorption of noble gas on 2D materials, but also to control the physical properties of graphene by the formation of a graphene‐noble gas interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural relationships between new carbide La{sub 14}Sn(MnC{sub 6}){sub 3} and fully ordered La{sub 11}(MnC{sub 6}){sub 3}

Crystals of the ternary La{sub 11}(MnC{sub 6}){sub 3} and new quaternary carbide La{sub 14}Sn(MnC{sub 6}){sub 3} phases were grown from La/Ni eutectic flux and their structures were determined by means of X-ray single crystal diffraction. La{sub 11}(MnC{sub 6}){sub 3} is a new superstructure variant of La{sub 3.67}MnC{sub 6} (previously reported disordered subcell: P6{sub 3}/m; a{sub 0}=8.806 A; c{sub 0}=5.329 A, Z=2). The superstructure (R3-bar ; a={radical}3a{sub 0}=15.2649(9) A; c=3c{sub 0}=16.013(1) A, Z=6; R{sub 1}=0.022) is realized by complete ordering of the La chains within the columns of face-sharing carbon octahedra, with alternating La-La distances leading to R-centering and enlargement of the unit cell. The structure of the quaternary carbide La{sub 14}Sn(MnC{sub 6}){sub 3} (P6-bar ; a=8.756(1) A; c=10.483(2) A, Z=1; R{sub 1}=0.026) is closely related to that of La{sub 11}(MnC{sub 6}){sub 3} with part of the MnC{sub 6} units replaced by Sn atoms. The structure and precise composition of La{sub 14}Sn(MnC{sub 6}){sub 3} can be derived from that of La{sub 11}(MnC{sub 6}){sub 3} by taking into account the extent of this substitution and variation in lanthanum siting in the chain of carbon octahedra. Band structure calculations indicate both phases are metallic; the La{sub 11}(MnC{sub 6}){sub 3} phase is stabilized by the ordering of La atoms which induces a pseudogap at E{sub F}. -- La{sub 11}(MnC{sub 6}){sub 3} with fully ordered superstructure and a new carbide La{sub 14}Sn(MnC{sub 6}){sub 3} were obtained from La/Ni eutectic flux. Display Omitted

36 MATERIALS SCIENCE↗

Structure and properties of a novel cobaltate La{sub 0.30}CoO{sub 2}

The layered cobaltate La{sub 0.30}CoO{sub 2} was prepared from Na{sub x}CoO{sub 2} precursor by a solid-state ionic exchange and was characterized by means of X-ray and neutron diffraction, magnetic, thermal and electric transport measurements. The compound consists of hexagonal sheets of edge-sharing CoO{sub 6} octahedra interleaved by lanthanum monolayers. Compared to Na{sup +} in the parent system, the La{sup 3+} ions occupy only one-third of available sites, forming a 2-dimensional superstructure. The deviation from the ideal stoichiometry La{sub 1/3}CoO{sub 2} introduces extra hole carriers into the diamagnetic LS Co{sup 3+} matrix making the sample Pauli paramagnetic. The temperature dependence of the electrical conductivity in La{sub 0.30}CoO{sub 2} follows Mott's T{sup -1/3} law up to about 400 K, which is in contrast with the standard metallic behavior in the Na{sup +} homolog possessing the same formal doping. The experiments are complemented by electronic structure calculations for La{sub 0.30}CoO{sub 2} and related Na{sub x}CoO{sub 2} systems. - Graphical abstract: Optimized superstructure of La{sub 0.3}CoO{sub 2} obtained by LDA calculation. Highlights: > A novel layered cobaltate La{sub 0.30}CoO{sub 2} was prepared by a solid-state ionic exchange. > La{sup 3+} ions are ordered and form a 2-dimensional superstructure. > Electrical conductivity of variable range hopping type up to 400 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Li–Si–(O)–N system revisited: Structural characterization of Li{sub 21}Si{sub 3}N{sub 11} and Li{sub 7}SiN{sub 3}O

A systematic study of the Li–Si–(O)–N system is presented. The synthetic conditions to prepare Li{sub 2}SiN{sub 2}, Li{sub 5}SiN{sub 3}, Li{sub 18}Si{sub 3}N{sub 10}, Li{sub 21}Si{sub 3}N{sub 11} and Li{sub 7}SiN{sub 3}O are described and the structure of the last two compounds has been solved for the first time. While Li{sub 21}Si{sub 3}N{sub 11} crystallizes as a superstructure of the anti-fluorite structure with Li and Si ordering, Li{sub 7}SiN{sub 3}O exhibits the anti-fluorite structure with both anion and cation disorder. - Graphical abstract: A systematic study of the Li–Si–(O)–N system is presented. Li{sub 21}Si{sub 3}N{sub 11} crystallizes as a superstructure of the anti-fluorite structure with Li and Si ordering, Li{sub 7}SiN{sub 3}O exhibits the anti-fluorite structure with both anion and cation disorder. - Highlights: • Li{sub 2}SiN{sub 2}, Li{sub 5}SiN{sub 3}, Li{sub 18}Si{sub 3}N{sub 10}, Li{sub 21}Si{sub 3}N{sub 11} and Li{sub 7}SiN{sub 3}O are prepared. • The structures of Li{sub 21}Si{sub 3}N{sub 11} and Li{sub 7}SiN{sub 3}O are presented. • Li{sub 21}Si{sub 3}N{sub 11} exhibits an anti-fluorite superstructure with Li and Si ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On squaring triangles – Structural motifs in Cu–In–Sb compounds

Two new ternary Cu–In–Sb compounds Cu{sub 7}In{sub 2.5}Sb{sub 0.5} and Cu{sub 2}In{sub 0.75}Sb{sub 0.25} are presented. Both compounds are Ni{sub 2}In type superstructures with vacancies in the pseudohexagonal network. Additionally, the pseudocubic nature of the compounds and Ni{sub 2}In type (super)structures, in general, is discussed. Remarkably, a large number of pseudo-five-fold and pseudo-three-fold axes contribute to generate a pseudocubic symmetry in the crystal structure that is reflected in pseudocubic axial ratios in Ni{sub 2}In type superstructures. We find that they belong to the family of tetrahedrally close packed structures which implies that pseudocubic axial relationships simply are to be expected. - Graphical abstract: Evolution of pseudocubic clusters in Sb-doped Cu{sub 7}In{sub 3} and the Cu–In–Sb 2:1 phase. - Highlights: • Two new ternary compounds Cu{sub 7}In{sub 2.5}Sb{sub 0.5} and Cu{sub 2}In{sub 0.75}Sn{sub 0.25}. • First ternary Ni{sub 2}In superstructures with vacancies in the pseudohexagonal network. • Pseudocubic clusters in the pseudohexagonal structures. • Pseudocubic c/a ratios due to the relation to tetrahedrally close packed structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thickness-Tunable Self-Assembled Colloidal Nanoplatelet Films Enable Ultrathin Optical Gain Media

We propose and demonstrate construction of highly uniform, multilayered superstructures of CdSe/CdZnS core/shell colloidal nanoplatelets (NPLs) using liquid interface self-assembly. These NPLs are sequentially deposited onto a solid substrate into slabs having monolayer-precise thickness across tens of cm(2) areas. Because of near-unity surface coverage and excellent uniformity, amplified spontaneous emission (ASE) is observed from an uncharacteristically thin film having 6 NPL layers, corresponding to a mere 42 nm thickness. Furthermore, systematic studies on optical gain of these NPL superstructures having thicknesses ranging from 6 to 15 layers revealed the gradual reduction in gain threshold with increasing number of layers, along with a continuous spectral shift of the ASE peak (similar to 18 nm). These observations can be explained by the change in the optical mode confinement factor with the NPL waveguide thickness and propagation wavelength. This bottom-up construction technique for thickness-tunable, three-dimensional NPL superstructures can be used for large-area device fabrication.

Erdem, Onur↗

Dopant Mediated Assembly of Cu 2 ZnSnS 4 Nanorods into Atomically Coupled 2D Sheets in Solution

Assembly of anisotropic nanocrystals into ordered superstructures is an area of intense research interest due to its relevance to bring nanocrystal properties to macroscopic length scales and to impart additional collective properties owing to the superstructure. Numerous routes have been explored to assemble such nanocrystal superstructures ranging from self-directed to external field-directed methods. Most of the approaches require sensitive control of experimental parameters that are largely environmental and require extra processing steps, increasing complexity and limiting reproducibility. Here, we demonstrate a simple approach to assemble colloidal nanorods in situ, wherein dopant incorporation during the particle synthesis results in the formation of preassembled 2D sheets of close-packed ordered arrays of vertically oriented nanorods in solution.

36 MATERIALS SCIENCE↗

Kinetics of the Topochemical Transformation of (PbSe) m (TiSe 2 ) n (SnSe 2 ) m (TiSe 2 ) n to (Pb 0.5 Sn 0.5 Se) m (TiSe 2 ) n

Solid-state reaction kinetics on atomic length scales have not been heavily investigated due to the long times, high reaction temperatures, and small reaction volumes at interfaces in solid-state reactions. All of these conditions present significant analytical challenges in following reaction pathways. Herein we use in situ and ex situ X-ray diffraction, in situ X-ray reflectivity, high-angle annular dark field scanning transmission electron microscopy, and energy-dispersive X-ray spectroscopy to investigate the mechanistic pathways for the formation of a layered (Pb 0.5 Sn 0.5 Se) 1+δ (TiSe 2 ) m heterostructure, where m is the varying number of TiSe 2 layers in the repeating structure. Thin film precursors were vapor deposited as elemental-modulated layers into an artificial superlattice with Pb and Sn in independent layers, creating a repeating unit with twice the size of the final structure. At low temperatures, the precursor undergoes only a crystallization event to form an intermediate (SnSe 2 ) 1+γ (TiSe 2 ) m (PbSe) 1+δ (TiSe 2 ) m superstructure. At higher temperatures, this superstructure transforms into a (Pb 0.5 Sn 0.5 Se) 1+δ (TiSe 2 ) m alloyed structure. The rate of decay of superlattice reflections of the (SnSe 2 ) 1+γ (TiSe 2 ) m (PbSe) 1+δ (TiSe 2 ) m superstructure was used as the indicator of the progress of the reaction. Here, we show that increasing the number of TiSe 2 layers does not decrease the rate at which the SnSe 2 and PbSe layers alloy, suggesting that at these temperatures it is reduction of the SnSe 2 to SnSe and Se that is rate limiting in the formation of the alloy and not the associated diffusion of Sn and Pb through the TiSe 2 layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complex motion of steerable vesicular robots filled with active colloidal rods

Abstract While the collective motion of active particles has been studied extensively, effective strategies to navigate particle swarms without external guidance remain elusive. We introduce a method to control the trajectories of two-dimensional swarms of active rod-like particles by confining the particles to rigid bounding membranes (vesicles) with non-uniform curvature. We show that the propelling agents spontaneously form clusters at the membrane wall and collectively propel the vesicle, turning it into an active superstructure. To further guide the motion of the superstructure, we add discontinuous features to the rigid membrane boundary in the form of a kinked tip, which acts as a steering component to direct the motion of the vesicle. We report that the system’s geometrical and material properties, such as the aspect ratio and Péclet number of the active rods as well as the kink angle and flexibility of the membrane, determine the stacking of active particles close to the kinked confinement and induce a diverse set of dynamical behaviors of the superstructure, including linear and circular motion both in the direction of, and opposite to, the kink. From a systematic study of these various behaviors, we design vesicles with switchable and reversible locomotions by tuning the confinement parameters. The observed phenomena suggest a promising mechanism for particle transportation and could be used as a basic element to navigate active matter through complex and tortuous environments.

42 ENGINEERING↗

Direct observation of electronic-liquid-crystal phase transitions and their microscopic origin in La 1/3 Ca 2/3 MnO 3

The ground-state electronic order in doped manganites is frequently associated with a lattice modulation, contributing to their many interesting properties. However, measuring the thermal evolution of the lattice superstructure with reciprocal-space probes alone can lead to ambiguous results with competing interpretations. Here, we provide direct observations of the evolution of the superstructure in La 1/3 Ca 2/3 MnO 3 in real space, as well as reciprocal space, using transmission electron microscopic (TEM) techniques. We show that the transitions are the consequence of a proliferation of dislocations plus electronic phase separation. The resulting states are well described by the symmetries associated with electronic-liquid-crystal (ELC) phases. Furthermore, our results resolve the long-standing controversy over the origin of the incommensurate superstructure and suggest a new structural model that is consistent with recent theoretical calculations.

36 MATERIALS SCIENCE↗

Deep learning potential of mean force between polymer grafted nanoparticles

Grafting polymer chains on the surfaces of nanoparticles is a well-known route to control their self-assembly and distribution in a polymer matrix. A wide variety of self-assembled structures are achieved by changing the grafting patterns on the surface of an individual nanoparticle. However, an accurate estimation of the effective potential of mean force between a pair of grafted nanoparticles that determines their assembly and distribution in a polymer matrix is an outstanding challenge in nanoscience. We address this problem via deep learning. As a proof of concept, here we report a deep learning framework that learns the interaction between a pair of single-chain grafted spherical nanoparticles from their molecular dynamics trajectory. Subsequently, we carry out the deep learning potential of mean force-based molecular simulation that predicts the self-assembly of a large number of single-chain grafted nanoparticles into various anisotropic superstructures, including percolating networks and bilayers depending on the nanoparticle concentration in three-dimensions. The deep learning potential of mean force-predicted self-assembled superstructures are consistent with the actual superstructures of single-chain polymer grafted spherical nanoparticles. This deep learning framework is very generic and extensible to more complex systems including multiple-chain grafted nanoparticles. Finally, we expect that this deep learning approach will accelerate the characterization and prediction of the self-assembly and phase behaviour of polymer-grafted and unfunctionalized nanoparticles in free space or a polymer matrix.

36 MATERIALS SCIENCE↗

Development of a surface conductivity measurement system for ultrahigh vacuum transmission electron microscope

The surface conductivity measurement system using a micro-four-point probe (M4PP) had been developed for the ultrahigh vacuum transmission electron microscope (UHV-TEM). Since the current distribution in the sample crystals during the current voltage measurement by the M4PP is localized within the depth of several micrometers from the surface, the system is sensitive to the surface conductivity, which is related with the surface superstructure. It was installed in the main chamber of the TEM and the surface conductivity can be measured in situ. The surface structures were observed by reflection electron microscopy and diffraction (REM-RHEED). REM-RHEED enables us to observe the surface superstructures and their structure defects such as surface atomic steps and domain boundaries of the surface superstructure. Thus the effects of the defects on the surface conductivity can be investigated. In the present paper we present the surface conductivity measurement system and its application to the Si(111)-{radical}(3)x{radical}(3)-Ag surface prepared on the Si(111) vicinal surfaces. The result clearly showed that the surface conductivity was affected by step configuration.

36 MATERIALS SCIENCE↗

Magneto-electronic coupling in modulated defect-structures of natural Fe{sub 1−x}S

We provide compelling experimental evidence that the low-temperature transition in natural non-stoichiometric Fe{sub 7}S{sub 8}, a major magnetic remanence carrier in the Earth's crust and in extraterrestrial materials, is a phenomenon caused by magnetic coupling between epitaxially intergrown superstructures. The two superstructures differ in their defect distribution, and consequently in their magnetic anisotropy. At T < 30 K, the magnetic moments of the superstructures become strongly coupled, resulting in a 12-fold anisotropy symmetry, which is reflected in the anisotropic magneto-resistance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗