Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

The Brewster angle effect in SAR polarimetry

For the double bounce case, where the radar signal is reflected twice before returning to the radar antenna, some polarization effects may be observed related to the dielectric constant of the two surfaces causing the reflections. The most noticeable effect would be that the returned signal would be preferentially H polarized. In fact, it may be possible to discern the Brewster angle for both surfaces. The locations of the Brewster angle will depend on the dielectric constant and permittivity of each surface. If it is assumed that both reflections are in the same plane of incidence, and that both surfaces are smooth and flat, there is a straightforward relationship between the degree of linear polarization m and both the dielectric constants of the two reflecting surfaces and the angle of incidence of the illuminating wave: m carat = cos 2(arccot (square root of (R(sub v) / R(sub h)))) where R(sub v,h) are the V and H polarized Fresnel reflection coefficients for two surfaces perpendicular to each other. The degree of linear polarization may be calculated from AIRSAR compressed Stokes data and compared with the given equation. The degree of linear polarization may also be calculated using tree models and compared with AIRSAR data. With further work, it may be possible to use the degree of linear polarization to determine surface parameters of certain imaged areas.

Chapman, B.↗
NASA NTRS1992

Exploration of the solar system by infrared remote sensing

The remote sensing of objects in the solar system using infrared radiation is discussed. Theories of radiative transfer, molecular spectroscopy, and atmospheric physics are used to show how infrared spectra of model planetary atmospheres are calculated. Instrumental techniques are described and the effect of instruments on the measurement of the emerging radiation field is addressed. Techniques that allow the retrieval of atmospheric and surface parameters from observations are examined. All the planets except Pluto are studied, and many of the planetary satellites.

Hanel, R. A.↗
NASA NTRS1994

Radiation budgets in the western tropical Pacific

The usefulness of the radiances measured by operational satellites in deriving radiation budgets is demonstrated by comparing the model calculations with the Earth Radiation Budget Experiment (ERBE) fluxes. The radiation budgets in the atmosphere and at the surface in the western tropical Pacific are computed by coupling radiative transfer models to satellite retrievals of cloud and the earth surface parameters for April 1985 and April 1987. The model-computed fluxes at the top of the atmosphere agree well with the ERBE fluxes in both the solar and IR spectral regions. The difference is greater than 10 W/sq m in the outgoing longwave flux and greater than 15 W/sq m in the net downward shortwave flux. The agreement indicates that long-term earth radiation budgets in the tropical Pacific can be computed using the radiances measured by operational satellites.

Chou, Ming-Dah↗
NASA NTRS1996

Remotely Sensed Index of Deforestation/Urbanization for use in Climate Models

The purpose of this investigation is to use a new method for deriving land surface parameters from a combination of thermal infrared and vegetation index measurements from satellites (Landsat-TM, and NOAA-AVHRR) and to integrate these parameters with more conventional data bases. We have completed an investigation of urbanization in the State College, PA area and have begun work in Chester County, PA, and Costa Rica. Our basic hypothesis is that changes in land use, including deforestation, exert a profound influence on local microclimates whose effects may greatly exceed in importance those occurring on larger scales.

Carlson, Toby N.↗
NASA NTRS1998

An Approximate Axisymmetric Viscous Shock Layer Aeroheating Method for Three-Dimensional Bodies

A technique is implemented for computing hypersonic aeroheating, shear stress, and other flow properties on the windward side of a three-dimensional (3D) blunt body. The technique uses a 2D/axisymmetric flow solver modified by scale factors for a, corresponding equivalent axisymmetric body. Examples are given in which a 2D solver is used to calculate the flow at selected meridional planes on elliptic paraboloids in reentry flight. The report describes the equations and the codes used to convert the body surface parameters into input used to scale the 2D viscous shock layer equations in the axisymmetric viscous shock layer code. Very good agreement is obtained with solutions to finite rate chemistry 3D thin viscous shock layer equations for a finite rate catalytic body.

Brykina, Irina G.↗
NASA NTRS1984

The Specular Reflectance of IR-Opaque Coatings

A reflecting-layer model of the specular reflectance of a rough, thick, absorbing, dielectric film has been developed and fitted to the spectra of seven optical-black coatings between 12 and 300 micrometers. The coatings were quite different. At 100 micrometers their reflectance varied by a factor of nearly 10(exp 3). The model determines optical constants and surface parameters, and indicates which parameters control reflectance in the far IR.

Smith, Sheldon M.↗
NASA NTRS2000

Quasi-Steady Acceleration Direction Indicator in Three Dimensions

Many materials processing and fluids physics experiments conducted in a microgravity environment require knowledge of the orientation of the low-frequency acceleration vector. This need becomes especially acute for space experiments such as directional solidification of a molten semiconductor, which is extremely sensitive to orientation and may involve tens of hours of operations of a materials furnace. These low-frequency acceleration data have been measured for many Shuttle missions with the Orbital Acceleration Research Experiment. Previous attempts at using fluid chambers for acceleration measurements have met with limited success due to pointing and vehicle attitude complications. An acceleration direction indicator is described, which is comprised of two orthogonal short cylinders of fluid, each with a small bubble. The motion and the position of the bubble within the chamber will indicate the direction of the acceleration experienced at the sensor location. The direction of the acceleration vector may then be calculated from these data. The frequency response of such an instrument may be tailored for particular experiments with the proper selection of fluid and gas parameters, surface type, and geometry. A three-dimensional system for sensing and displaying the low-frequency acceleration direction via an innovative technique described in this paper has advantages in terms of size, mass, and power compared with electronic instrumentation systems.

DeLombard, Richard↗
NASA NTRS2001

Retrievals of Column Water Vapor Using Millimeter-Wave Radiometric Measurements

Water vapor is one of the most important atmospheric constituents that has a critical impact on cloud formation (ice or liquid). It is also a source that needs to be accounted for in remote measurements of surface parameters. In the high-latitude regions, e.g., Antarctica, monitoring of the state of water vapor and its transport into and out of these regions is important towards our understanding the state of balance of ice sheets and its effect on the global sea level. The technique of retrieving low amount of column water vapor using the millimeter-wave radiometric measurements, as presented in this paper, will be very useful for these regions, especially during winter times when the atmosphere is relatively dry.

Wang, J. R.↗
NASA NTRS2003

Laser Remote Sensing and Lidar Measurements for Planetary Bodies

Laser Remote Sensing and lidar have been used for earth remote sensing for a number of years however the inefficiency of laser devices has limited their application to planetary sensing where power is at a premium. The potential availability of a large amount of power for the Jupiter Icy Moons Orbiter (JIMO) opens up the potential to implement laser remote sensing for planetary bodies. Lidars have been and can be used to map terrain, measure atmospheric and surface parameters including velocity and composition. In this paper we will provide an overview of the lidar capabilities at the Jet Propulsion Laboratory and address the types of lidar measurements that could be relevant to JIMO science investigations.

Spiers, G. D.↗
NASA NTRS2004

An Orbital "Virtual Radar" from TRMM Passive Microwave and Lightning Observations

The retrieval of vertical structure from joint passive microwave and lightning observations is demonstrated. Three years of data from the TRMM (Tropical Rainfall Measuring Mission) are used as a training dataset for regression and classification neural networks; the TMI (TRMM Microwave Imager) and LIS (Lightning Imaging Sensor) provide the inputs, the PR (Precipitation Radar) provides the training targets. Both vertical reflectivity profile categorization (into 9 convective, 7 stratiform, 2 mixed and 6 anvil types) and geophysical parameters (surface rainfall, vertically integrated liquid (VIL), ice water content (IWC) and echo tops) are retrieved. Retrievals are successful over both land and ocean surfaces. The benefit of using lightning observations as inputs to these retrievals is quantitatively demonstrated; lightning essentially provides an additional convective/stratiform discriminator, and is most important for isolation of midlevel (tops in the mixed phase region) convective profile types (this is because high frequency passive microwave observations already provide good convective/stratiform discrimination for deep convective profiles). This is highly relevant as midlevel convective profiles account for an extremely large fraction of tropical rainfall, and yet are most difficult to discriminate from comparable-depth stratiform profile types using passive microwave observations alone.

Boccippio, Dennis J.↗
NASA NTRS1999

A Spectralon BRF Data Base for MISR Calibration Application

The Multi-angle Imaging SpectroRadiometer (MISR) is an Earth observing sensor which will provide global retrievals of aerosols, clouds, and land surface parameters. Instrument specifications require high accuracy absolute calibration, as well as accurate camera-to-camera, band-to-band and pixel-to-pixel relative response determinations.

spectralon MISR spectroradiometer remote sensing↗
NASA NTRS1993

Estimation of Soil Moisture and Biomass Changes Using SAR Data During EFEDA-Spain Experiment

During the 1991 MAC-EUROPE campaign, the Castilla La-Mancha region of Spain was surveyed by the Multi-frequency (P-,L-, C-band) polarimetric AIRSAR of Jet Propulsion Laboratory. The experiment was devised to demonstrate the role of SAR imagery in detecting and estimating surface parameters such as soil moisture and canopy water content.

Soil MoistureBiomass Changes Spain↗
NASA NTRS2006

Analytical Derivation of the Vegetation Optical Depth from the Microwave Polarization Difference Index

A numerical solution for the canopy optical depth in an existing microwave-based land surface parameter retrieval model is presented. The optical depth is derived from the microwave polarization difference index and the dielectric constant of the soil. The original procedure used an approximation in the form of a logarithmic decay function to define this relationship, and was derived through a series of lengthy polynomials. These polynomials had to be recalculated when the scattering albedo or antenna incidence angle changes. The new procedure is computationally more efficient and accurate.

Meesters, Antoon G. C. A.↗
NASA NTRS2007

Seasonal Correlations of SST, Water Vapor, and Convective Activity in Tropical Oceans: A New Hyperspectral Data Set for Climate Model Testing

The analysis of the response of the Earth Climate System to the seasonal changes of solar forcing in the tropical oceans using four years of the Atmospheric Infrared Sounder (AIRS) and Advanced Microwave Sounding Unit (AMSU) data between 2002 and 2006 gives new insight into amplitude and phase relationships between surface and tropospheric temperatures, humidity, and convective activity. The intensity of the convective activity is measured by counting deep convective clouds. The peaks of convective activity, temperature in the mid-troposphere, and water vapor in the 0 - 30 N and 0 - 30 S tropical ocean zonal means occur about two months after solstice, all leading the peak of the sea surface temperature by several weeks. Phase is key to the evaluation of feedback. The evaluation of climate models in terms of zonal and annual means and annual mean deviations from zonal means can now be supplemented by evaluating the phase of key atmospheric and surface parameters relative to solstice. The ability of climate models to reproduce the statistical flavor of the observed amplitudes and relative phases for broad zonal means should lead to increased confidence in the realism of their water vapor and cloud feedback algorithms. AIRS and AMSU were launched into a 705 km altitude polar sun-synchronous orbit on the EOS Aqua spacecraft on May 4, 2002, and have been in routine data gathering mode since September 2002.

Atmospheric Infrared Sounder↗
NASA NTRS2008

1D-VAR Retrieval Using Superchannels

Since modern ultra-spectral remote sensors have thousands of channels, it is difficult to include all of them in a 1D-var retrieval system. We will describe a physical inversion algorithm, which includes all available channels for the atmospheric temperature, moisture, cloud, and surface parameter retrievals. Both the forward model and the inversion algorithm compress the channel radiances into super channels. These super channels are obtained by projecting the radiance spectra onto a set of pre-calculated eigenvectors. The forward model provides both super channel properties and jacobian in EOF space directly. For ultra-spectral sensors such as Infrared Atmospheric Sounding Interferometer (IASI) and the NPOESS Airborne Sounder Testbed Interferometer (NAST), a compression ratio of more than 80 can be achieved, leading to a significant reduction in computations involved in an inversion process. Results will be shown applying the algorithm to real IASI and NAST data.

Liu, Xu↗
NASA NTRS2007

Seasonal Correlations of SST, Water Vapor, and Convective Activity in Tropical Oceans: A New Hyperspectral Data Set for Climate Model Testing

The analysis of the response of the Earth Climate System to the seasonal changes of solar forcing in the tropical oceans using four years of the Atmospheric Infrared Sounder (AIRS) and Advanced Microwave Sounding Unit (AMSU) data between 2002 and 2006 gives new insight into amplitude and phase relationships between surface and tropospheric temperatures, humidity, and convective activity. The intensity of the convective activity is measured by counting deep convective clouds. The peaks of convective activity, temperature in the mid-troposphere, and water vapor in the 0-30 N and 0-30 S tropical ocean zonal means occur about two months after solstice, all leading the peak of the sea surface temperature by several weeks. Phase is key to the evaluation of feedback. The evaluation of climate models in terms of zonal and annual means and annual mean deviations from zonal means can now be supplemented by evaluating the phase of key atmospheric and surface parameters relative to solstice. The ability of climate models to reproduce the statistical flavor of the observed amplitudes and relative phases for broad zonal means should lead to increased confidence in the realism of their water vapor and cloud feedback algorithms. AIRS and AMSU were launched into a 705 km altitude polar sun-synchronous orbit on the EOS Aqua spacecraft on May 4, 2002, and have been in routine data gathering mode since September 2002.

Atmospheric Infrared Sounder (AIRS)↗
NASA NTRS2003

AIRS Level 2 Status

The Atmospheric Infrared Sounder (AIRS) is a facility instrument onboard EOS Aqua. Major level 2 products are highlighted including temperature profile; water vapor profile; surface skin temperature and other surface parameters; and, cloud friction and top cloud pressure. Level 2 files and data availability are discussed.

AIRS↗
NASA NTRS2007

Handling Input and Output for COAMPS

Two suites of software have been developed to handle the input and output of the Coupled Ocean Atmosphere Prediction System (COAMPS), which is a regional atmospheric model developed by the Navy for simulating and predicting weather. Typically, the initial and boundary conditions for COAMPS are provided by a flat-file representation of the Navy s global model. Additional algorithms are needed for running the COAMPS software using global models. One of the present suites satisfies this need for running COAMPS using the Global Forecast System (GFS) model of the National Oceanic and Atmospheric Administration. The first step in running COAMPS downloading of GFS data from an Internet file-transfer-protocol (FTP) server computer of the National Centers for Environmental Prediction (NCEP) is performed by one of the programs (SSC-00273) in this suite. The GFS data, which are in gridded binary (GRIB) format, are then changed to a COAMPS-compatible format by another program in the suite (SSC-00278). Once a forecast is complete, still another program in the suite (SSC-00274) sends the output data to a different server computer. The second suite of software (SSC- 00275) addresses the need to ingest up-to-date land-use-and-land-cover (LULC) data into COAMPS for use in specifying typical climatological values of such surface parameters as albedo, aerodynamic roughness, and ground wetness. This suite includes (1) a program to process LULC data derived from observations by the Moderate Resolution Imaging Spectroradiometer (MODIS) instruments aboard NASA s Terra and Aqua satellites, (2) programs to derive new climatological parameters for the 17-land-use-category MODIS data; and (3) a modified version of a FORTRAN subroutine to be used by COAMPS. The MODIS data files are processed to reformat them into a compressed American Standard Code for Information Interchange (ASCII) format used by COAMPS for efficient processing.

Fitzpatrick, Patrick↗