Fluorine-Free Superhydrophobic Surface by Single-Step-Synthesized Homogeneous Polymeric Raspberry Nanoparticle Coating
Not provided.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not provided.
Sapphire is widely used in production of optical windows for various devices due to its mechanical and optical properties. However, during operation the surface can be affected by fats, oils, and other organic contaminations. Therefore, it is important to improve the oleophobic properties of sapphire windows. In this study, we investigate the interaction of a supersmooth sapphire surface with oleic acid droplets, which imitate human finger printing. It is established that chemical–mechanical polishing with additional annealing in air, which leads to the formation of an atomically smooth sapphire surface, makes it possible to significantly improve the oleophobic properties of the surface. The results are analyzed using the Ventsel–Deryagin homogeneous wetting model.
Abstract not provided.
Highlights: ► Surface modification of boron nitride nanotubes using polymeric materials. ► Surface-modified BNNT was purified with a simple dilution-centrifugation step. ► Surface-modified BNNT can be directly used for polymer composite fabrication ► Degree of purification was analyzed by Raman spectroscopy. - Abstract: Boron nitride nanotubes (BNNT) synthesized by a ball milling-annealing were surface-modified using three different types of polymeric materials. Those materials were chosen depending on future applications especially in polymer nanocomposite fabrications. We found that the surface-modified BNNT can be purified with a simple dilution-centrifugation step, which would be suitable for large-scale purification. Degree of purification was monitored by means of the center peak position and FWHM of E{sub 2g} mode of BNNT in Raman spectra. As the purification of BNNT develops, the peak position was up-shifted while FWHM of the peak was narrowed.
Recently, nickel phosphides (Ni x P y ) have been reported to enable selective electrochemical formation of multicarbon products (C 3 and C 4 ) via the CO 2 reduction reaction (CO 2 RR); nevertheless, their activities remain low. In order to understand the roots of their high selectivity and low activity and to direct the design of more active Ni x P y -based CO 2 RR catalysts, we investigate the CO 2 RR mechanism on Ni 2 P using density functional theory (DFT) calculations. Iin this work, we reveal that the reaction proceeds through the formate pathway, followed by formaldehyde (H 2 CO*) formation and self-condensation. Moreover, we demonstrate that surface hydride transfer steps, along with surface-mediated C–C coupling, are essential in order to avoid C 1 product formation and boost selectivity toward multicarbon products. In addition, we find that the thermal surface hydride transfer from the surface to the physisorbed CO 2 is one of the key rate-limiting steps, and since it is not electroactive, it cannot be accelerated by applying an overpotential. Finally, our results also show that the hydrogen affinity of the surface and the dynamic surface reconstruction via H adsorption facilitate selective CO 2 reduction and C–C coupling on Ni 2 P. These findings provide an impetus for exploring materials design space to identify the physical principles that govern the thermodynamics of rate-limiting thermal steps in electrocatalytic processes.
Two-step laser desorption mass spectrometry is a well suited technique to the analysis of high priority classes of organics, such as polycyclic aromatic hydrocarbons, present in complex samples. The use of decoupled desorption and ionization laser pulses allows for sensitive and selective detection of structurally intact organic species. We have recently demonstrated the implementation of this advancement in laser mass spectrometry in a compact, flight-compatible instrument that could feasibly be the centerpiece of an analytical science payload as part of a future spaceflight mission to a small body or icy moon.
A multi-step Q-passivation method for stainless steel is described. The method includes a first high voltage electropolishing step followed by as separate low voltage chromium enhancement step. The method can also include a vacuum heat treatment step that utilizes a cyclic ramp-up period so as to maintain a relatively low pressure and low temperature throughout the step. The method can also include a controlled oxidation step during which the surface is contacted with an oxygen/inert gas mixture at low oxygen partial pressure.
Dry buffer layer deposition techniques for chalcopyrite (CIGSSe)-based thin-film solar cells lack the surface-cleaning characteristics of the commonly used CdS or Zn(O,S) wet-chemical bath deposition. Here, a UV-induced ozone and/or a low-energy Ar + -ion treatment could provide dry CIGSSe surface cleaning steps. To study the impact of these treatments, the chemical surface structure of a CIGSSe absorber is investigated. For this purpose, a set of surface-sensitive spectroscopic methods, i.e., laboratory-based x-ray photoelectron spectroscopy and x-ray-excited Auger electron spectroscopy, is combined with synchrotron-based soft x-ray emission spectroscopy. After treatment times as short as 15 s, the UV-induced ozone treatment decreases the amount of carbon adsorbates at the CIGSSe surface significantly, while the oxygen content increases. This is accompanied by the oxidation of all absorber surface elements, i.e., indium, selenium, sulfur, and copper. Short (60 s) low-energy Ar + -ion treatments, in contrast, primarily remove oxygen from the surface. Longer treatment times also lead to a removal of carbon, while extremely long treatment times can also lead to additional (likely metallic) Cu phases at the absorber surface as well.
Hydrogen chloride (HCl) is a major combustion product from the pyrolysis of polyvinyl chloride (PVC) insulated electrical wires, a common spacecraft fire safety concern. Models at two different scales were developed to predict HCl uptake on anodized, chromate conversion coated (Iridite), and bare aluminum surfaces, as well as on Nomex fabric: a macroscopic one-step global surface reaction model where all the active sites are on the exterior surface, and a pore model where the interior active sites deeper into the oxide layer can also be accessed by HCl. Experiments were performed to calibrate kinetic and diffusion constants in the models. A cast acrylic test cell was used to measure the differences between the inlet and outlet concentration of HCl after inserting a sample rod of the test material. For the materials with a thin (< 200 µm) or no oxide layer, the macroscopic surface reaction model adequately predicts the experimental measurements. For the anodized aluminum with a thicker oxide layer, the pore model provided a better match to experimental results. The results will be discussed with respect to the spacecraft fire safety project (Saffire).
We present a detailed theoretical study of the energetics of stoichiometric steps on the (110) surface of rutile TiO{sub 2}. Step structures running along the 〈001〉, 〈11{sup ¯}1〉, and 〈11{sup ¯}0〉 directions including bulk-terminations and possible reconstructions have been considered. A robust method for extracting surface and step energies of vicinal surfaces, where the surface energies converge slowly with respect to slab thickness, is outlined and used. Based on the calculated step energies a 2D Wulff-construction is presented from which it can be concluded that in equilibrium only oxygen terminated steps running along the 〈001〉 directions and reconstructed steps along the 〈11{sup ¯}1〉 directions should be present. Finally it is found that under conditions of stoichiometry the reconstructed 〈11{sup ¯}1〉 steps should be more than twice as abundant as oxygen terminated 〈001〉 steps.
The mechanism for the reoxidation step in the Marsvan Krevelen mechanism for ethanol partial oxidation over vanadia anchored on titanium oxide is examined. Kinetic parameters such as ethanol heat of adsorption, the activation energy for the rate-limiting step (alpha-hydrogen abstraction on the adsorbed ethoxide) were obtained while the energetics of the catalyst reoxidation step were explored. A comparison of the parameters obtained from kinetic analysis and the apparent activation energies reported in the literature indicated that a kinetic model that incorporates a catalyst reoxidation step, where molecular oxygen adsorbs into a titania vacancy, accurately predicted the kinetic parameters. In contrast, a model where molecular oxygen directly adsorbs on the reduced vanadia resulted in an underestimation of the ethanol heat of adsorption and activation energy for the a-hydrogen abstraction step. A computational analysis was implemented to elucidate a mechanistic pathway for reduced vanadia that incorporates oxygen adsorption on a titania vacancy. The results indicated that the vanadia reoxidation step involves surface oxygen migration from the titania surface to the reduced vanadia center. The quantification of oxygen uptake by the reduced catalyst validates the premise of this assumption: titania vacancies are created during ethanol partial oxidation and are active sites for oxygen adsorption.
The structures of the (001) surface of potassium tantalate doped with nominally 2, 4 and 7% lithium have been investigated using high resolution helium atom scattering. The surfaces were prepared by cleaving single crystal samples in situ under UHV conditions. Diraction measurements in the region around the He specular re ection angle soon after cleaving yielded specular peaks initially with broad shoulders. However, over a period of about an hour, the widths of these specular peaks decreased markedly as the shoulders diminished into the background. Drift spectra measurements of the stabilized surfaces revealed that the step heights separating surface terraces were predominantly multiples of the cubic unit cell dimension, about 4A, rather than multiples of a half unit cell, 2A, expected from the cleaving of these crystals. Together these results suggest that after cleaving these surfaces are rapidly modied by migration of ions to the surface from the near-surface. Further, half-order diraction peaks were observed in the <100> azimuth a short time after cleaving samples at room temperature, indicating that domains with (21) structure had formed.
The description of the chemical bond between a solid surface and an atom or a molecule is the fundamental basis for understanding surface reactivity and catalysis. Despite considerable research efforts, the physics that rules the strength of such chemical bonds remains elusive, especially on semiconductor surfaces. Widespread understandings are mostly based on the degree of filling of antibonding surface-adsorbate states that weaken the surface adsorption. The unoccupied antibonding surface-adsorbate states are often considered to have no effects on surface bonding. Here in this paper, we show that the energy levels of unoccupied antibonding surface-adsorbate states relative to the Fermi-level play a critical role in determining the trends in variations of surface adsorption energies. The electrons that would occupy those high-energy antibonding states are transferred to the Fermi-level, leading to an energy gain that largely controls surface bonding. To illustrate this picture, as a validating case, we study the hydrogen evolution reaction (HER) catalyzed by MoS 2 from density functional theory calculations. We find that the majority of antibonding surface-hydrogen states are positioned well above the Fermi-energy. A clear linear relationship between the energy gain from antibonding electron transfer and the adsorption energy is identified for hydrogen binds to either molybdenum or sulfur atoms at different sites. The antibonding-electron transfer energy can thus serve as a primary catalytic activity descriptor. The emerging picture identifies the origin of HER on MoS 2 , which is related to the empty in-gap states induced by sulfur vacancies or edges. Under this picture, the effects of surface inhomogeneity (e.g., defects, step edges) on surface bonding strength can be understood. This antibonding electron transfer picture also offers a physically different explanation for the well-known d-band theory for hydrogen adsorption on transition metal surfaces. The results provide guidelines for understanding and optimizing catalyst performance and designing new solid catalysts.
A low speed airfoil, the GA(W)-2, - a 13% thickness to chord ratio airfoil was evaluated. The wing of a Beech Sundowner was modified at by adding balsa ribs and covered with aluminum skin, to alter the existing airfoil shape to that of the GA(W)-2 airfoil. The aircraft was flown in a flight test program that gathered wing surface pressures and wake data from which the lift drag, and pitching moment of the airfoil could be determined. After the base line performance of the airfoil was measured, the drag due to surface irregularities such as steps, rivets and surface waviness was determined. The potential reduction of drag through the use of surface coatings such as KAPTON was also investigated.
Understanding the electrical properties of lunar regolith is vital to modeling radiofrequency(RF) propagation on the lunar surface a fundamental step in planning lunar surface missions. Near the lunar south pole, the regolith has yet to be directly sampled and thus there remains uncertainty in the electrical properties of the regolith. The regolith simulant NU-LHT-2M is a highlands simulant that is representative of the expected chemical composition of the regolith near the lunar south pole. Previous studies have investigated properties of NU-LHT at UHF and S-band[1]. Future missions to the lunar south pole are expected to utilize X and Ka-band for direct-to-Earth links and UHF, S-band, C-band, and Ka-band for lunar surface communication[2]. As a result, it is necessary to electrically characterize the lunar regolith at these frequencies. In this paper, coaxial impedance dielectric reflectometry is performed on the NU-LHT-2M simulant using a commercially available soil permittivity measurement device. This study serves as a preliminary measurement of the simulant and may lead to enhanced efficacy of the measurement hardware for future applications.
*Presentation for the publication* Understanding the electrical properties of lunar regolith is vital to modeling radiofrequency (RF) propagation on the lunar surface, a fundamental step in planning lunar surface missions. Near the lunar south pole, the regolith has yet to be directly sampled and thus there remains uncertainty in the electrical properties of the regolith. The regolith simulant NU-LHT-2M is a highlands simulant that is representative of the expected chemical composition of the regolith near the lunar south pole. Previous studies have investigated properties of NU-LHT at UHF and S-band[1]. Future missions to the lunar south pole are expected to utilize X and Ka-band for direct-to-Earth links and UHF, S-band, C-band, and Ka-band for lunar surface communication [2]. As a result, it is necessary to electrically characterize the lunar regolith at these frequencies. In this paper, coaxial impedance dielectric reflectometry is performed on the NU-LHT-2M simulant using a commercially available soil permittivity measurement device. This study serves as a preliminary measurement of the simulant and may lead to enhanced efficacy of the measurement hardware for future applications.
We report the first demonstration of 200 mm InGaAs-on-insulator (InGaAs-o-I) fabricated by the direct wafer bonding technique with a donor wafer made of III-V heteroepitaxial structure grown on 200 mm silicon wafer. The measured threading dislocation density of the In{sub 0.53}Ga{sub 0.47}As (InGaAs) active layer is equal to 3.5 × 10{sup 9} cm{sup −2}, and it does not degrade after the bonding and the layer transfer steps. The surface roughness of the InGaAs layer can be improved by chemical-mechanical-polishing step, reaching values as low as 0.4 nm root-mean-square. The electron Hall mobility in 450 nm thick InGaAs-o-I layer reaches values of up to 6000 cm{sup 2}/Vs, and working pseudo-MOS transistors are demonstrated with an extracted electron mobility in the range of 2000–3000 cm{sup 2}/Vs. Finally, the fabrication of an InGaAs-o-I substrate with the active layer as thin as 90 nm is achieved with a Buried Oxide of 50 nm. These results open the way to very large scale production of III-V-o-I advanced substrates for future CMOS technology nodes.