Search NASA⌕ Search

SEARCH · Search NASA

Results for “tandem devices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Measured gain suppression in FBK LGADs with different active thicknesses

In recent years, the gain suppression mechanism has been studied for large localized charge deposits in Low-Gain Avalanche Detectors (LGADs). LGADs are a thin silicon detector with a highly doped gain layer that provides moderate internal signal amplification. Using the CENPA Tandem accelerator at the University of Washington, the response of LGADs with different thicknesses to MeV-range energy deposits from a proton beam were studied. Three LGAD prototypes of 50 μm, 100 μm, and 150 μm were characterized. The devices' gain was determined as a function of bias voltage, incidence beam angle, and proton energy. This study was conducted in the scope of the PIONEER experiment, an experiment proposed at the Paul Scherrer Institute to perform high-precision measurements of rare pion decays. LGADs are considered for the active target (ATAR), and energy linearity is an important property for particle ID capabilities.

Particle tracking detectors↗
NASA NTRS2023

Benchmark Performance Metrics of a Vane Propellant Management Device for a 0.15 m3 Liquid Hydrogen Tank

The use of cryogenic propellants has and will continue to play an integral role in manned-space exploration due the high specific impulses offered and its ubiquity through in-situ resource utilization. But guaranteeing vapor-free transfer of such low-surface tension liquids is difficult for traditional capillary-action propellant management devices (PMDs). Screen-channel liquid acquisition devices and compliant origami bladders are potential solutions, but to quantify the benefits these technologies offer, this paper present a cast study analyzing the performance metrics of an orthodox vane PMD as a benchmark for comparison. A 0.15 m3 liquid hydrogen tank at 20.3 K and 103 kPa was selected for study. Then assuming no body forces and no heat transfer (for simplicity), a steady-state 1-D differential equation was numerically solved in tandem with four possible wetted area configurations to yield an expulsion efficiency for a theoretically maximum inputted expulsion flow rate. Maximization of the flow rate was constrained by the onset of choked flow. Additional inputs, including vane height and vane number, were parametrically varied between 0.1 – 10 cm and 4 – 28 vanes, respectively.

Liquid Acquisition Device↗
DOE OSTI2022

Effect of Annealing Conditions on Recovery of Lattice Damage in a High-Energy-Implanted 4H-SiC Superjunction PIN Diode

A high energy ion implantation system has been recently developed at the Tandem Van de Graaff facility at Brookhaven National Laboratory with tunable energy to 150 MeV capable of multi-step, deep implantation in 4H-SiC wafers with dopant atoms, such as B, P, Al, and N. Medium and high voltage devices with deep junctions can be fabricated using this system. Lattice strain introduced by the implantation process needs to be recovered and dopant atoms activated by appropriate annealing process as the device performance is strongly associated with the extent of recovery of the lattice. Using Synchrotron X-ray Rocking Curve Topography (SXRCT) and Reciprocal Space Mapping (RSM), the strain induced by high energy implantation of Al and N in 4H-SiC in different patterns are measured and mapped. It is observed that the strain levels correlate with the total fluence levels. PiN diodes fabricated on these implanted wafers were then annealed at temperatures ranging from 1700 °C to 2000 °C for 60 min. The SXRCT and RSM analysis of the annealed samples suggests that for the same annealing duration, higher temperature leads to better lattice recovery.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Solution Processed Ternary Tin (II) Alloy as Hole–Transport Layer of Sn–Pb Perovskite Solar Cells for Enhanced Efficiency and Stability

Tin-lead (Sn-Pb) narrow bandgap (NBG) perovskites show great potential in both single-junction and all-perovskite tandem solar cells. Sn-Pb perovskite solar cells (PSCs) are still limited by low charge collection efficiency and poor stability. Here, we report a ternary Sn (II) alloy of SnOCl as the hole-transport material (HTM) with a work function of 4.95 eV for Sn-Pb PSCs. The solution processed SnOCl layer has a texture structure which not only reduces the optical loss of the devices but also changes grain growth of Sn-Pb perovskites and boosts the carrier diffusion length to 3.63 μm. The formation of small perovskite grains at the HTM/perovskite interface is suppressed. These result in an almost constant internal quantum efficiency of 96 ± 2% across the absorption spectrum of Sn-Pb perovskites. The SnOCl HTM significantly enhances the stability of Sn-Pb PSCs with 87% of its initial efficiency retained after 1-sun illumination for 1,200 h, and keep 85% efficiency under 85°C thermal stress for 1,500 h. Furthermore, the hybrid HTM further improve the stabilized efficiencies of single-function Sn-Pb PSCs and all-perovskite tandem solar cells to 23.2% and 25.9%, respectively. This discovery opens an avenue to the multi-component metal alloys as HTM in PSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ion-Exchange Membrane-Centric Durability Testing and Degradation Characterization for Industry-Relevant CO 2 Reduction

Electrochemical CO 2 reduction is a promising conversion process for producing value-added fuels and chemicals from electricity and CO 2 as a sustainable carbon feedstock to domestically produce fuels and chemicals from industrial waste. Having reached industrially viable performance metrics with small-scale CO 2 electrolysis cells, the field must now increasingly focus on extending the device durability of large stacks to achieve equivalent metrics for 35,000+ hours to decrease maintenance and capital costs. Reported device lifetimes have increased in recent years, with the longest stability studies for CO, ethylene, and formic acid production being published in 2024–2025 with operation times of 4500, 1000, and 5200 h, respectively. Unfortunately, significant extension of the device durability is still required. Here, we provide an overview of ion-exchange membranes (IEMs) and provide insight into the variety of degradation mechanisms that must be overcome to enable the community to meet durability targets. In an effort to accelerate the extension of device lifetimes, we propose a general approach for characterizing CO 2 electrolysis cell degradation before and after durability testing to better elucidate the mechanisms and failure modes of IEMs in zero-gap cells. Furthermore, we encourage the adoption of operando characterizations in tandem with accelerated stress and durability tests, postulating that their combined applications will be increasingly valuable. We hope that this perspective motivates future durability studies to evaluate degradation across the entire electrolysis cell.

09 BIOMASS FUELS↗
NASA NTRS1992

Development of an advanced spacecraft tandem mass spectrometer

The purpose of this research was to apply current advanced technology in electronics and materials to the development of a miniaturized Tandem Mass Spectrometer that would have the potential for future development into a package suitable for spacecraft use. The mass spectrometer to be used as a basis for the tandem instrument would be a magnetic sector instrument, of Nier-Johnson configuration, as used on the Viking Mars Lander mission. This instrument configuration would then be matched with a suitable second stage MS to provide the benefits of tandem MS operation for rapid identification of unknown organic compounds. This tandem instrument is configured with a newly designed GC system to aid in separation of complex mixtures prior to MS analysis. A number of important results were achieved in the course of this project. Among them were the development of a miniaturized GC subsystem, with a unique desorber-injector, fully temperature feedback controlled oven with powered cooling for rapid reset to ambient conditions, a unique combination inlet system to the MS that provides for both membrane sampling and direct capillary column sample transfer, a compact and ruggedized alignment configuration for the MS, an improved ion source design for increased sensitivity, and a simple, rugged tandem MS configuration that is particularly adaptable to spacecraft use because of its low power and low vacuum pumping requirements. The potential applications of this research include use in manned spacecraft like the space station as a real-time detection and warning device for the presence of potentially harmful trace contaminants of the spacecraft atmosphere, use as an analytical device for evaluating samples collected on the Moon or a planetary surface, or even use in connection with monitoring potentially hazardous conditions that may exist in terrestrial locations such as launch pads, environmental test chambers or other sensitive areas. Commercial development of the technology could lead to a new family of environmental test instruments that would be small and portable, yet would give quick analyses of complex samples.

Drew, Russell C.↗
DOE OSTI2023

Photophysics in emerging photovoltaics

Emerging photovoltaic technologies continue to march forward with power conversion efficiencies of lead halide perovskite solar cells (PSCs) nearing 26%, perovskite-Si tandems now exceeding the single junction detailed balance limit of 33%, and organic solar cells (OSCs) showing efficiencies nearing 20%. Yet, some of the photophysics underpinning PSCs and OSCs remain unresolved. A better understanding will enable more efficient and photostable solar cells and optoelectronic devices in the future. Here, this special issue collects the latest cutting-edge research in the photophysics of PSCs and OSCs, contributed by experts on spectroscopy, theory, device physics, and materials science.

14 SOLAR ENERGY↗
DOE OSTI2022

Best Practices in PEC Water Splitting: How to Reliably Measure Solar-to-Hydrogen Efficiency of Photoelectrodes

Photoelectrochemical (PEC) water splitting, which utilizes sunlight and water to produce hydrogen fuel, is potentially one of the most sustainable routes to clean energy. One challenge to success is that, to date, similar materials and devices measured in different labs or by different operators lead to quantitatively different results, due to the lack of accepted standard operating procedures and established protocols for PEC efficiency testing. With the aim of disseminating good practices within the PEC community, we provide a vetted protocol that describes how to prepare integrated components and accurately measure their solar-to-hydrogen (STH) efficiency (η STH ). This protocol provides details on electrode fabrication, η STH test device assembly, light source calibration, hydrogen evolution measurement, and initial material qualification by photocurrent measurements under monochromatic and broadband illumination. Common pitfalls in translating experimental results from any lab to an accurate STH efficiency under an AM1.5G reference spectrum are discussed. A III–V tandem photocathode is used to exemplify the process, though with small modifications, the protocol can be applied to photoanodes as well. Dissemination of PEC best practices will help those approaching the field and provide guidance for comparing the results obtained at different lab sites by different groups.

08 HYDROGEN↗
DOE OSTI2026

Ultrafast Spectroscopy in Chemistry

Ultrafast spectroscopy has become an indispensable investigation tool in numerous areas of chemical research encompassing purely synthetic to semiconductor material domains. Harnessing light on its femtosecond time scales offers a glimpse into submolecular processes that direct reaction pathways, energy transfer, charge separation, and many other fundamental chemical phenomena. In this Perspective, we highlight select examples that introduce how ultrafast spectroscopy became a pillar for modern chemical science. We emphasize the achievements of conventional pump–probe spectroscopy by showing its contribution to disentangling peculiar mechanisms of carrier relaxation in semiconductor nanocrystals, charge separation in organic photovoltaic devices, and photoredox catalyst activation. Our examples show that even traditional pump–probe experiments can provide extensive insights that go beyond the resolution of ultrafast time scales if combined with a thorough preliminary assessment of the target system. We conclude with suggestions for how ultrafast spectroscopy in tandem with chemical science can embark on advancing practical quantum information research.

Excitons↗
DOE OSTI2021

Wide-Gap Perovskite via Synergetic Surface Passivation and Its Application toward Efficient Stacked Tandem Photovoltaics

Superior bandgap tunability enables solution-processed halide perovskite a promising candidate for multi-junction photovoltaics (PVs). Particularly, optically coupling wide-gap perovskite by stacking with commercially available PVs such as silicon and CIGS (also known as 4-terminal tandem) simplifies the technology transfer process, and further advances the commercialization potential of perovskite technology. However, compared with matured PV materials and the phase-pure FAPbI 3 , wide-gap perovskite still suffers from huge voltage deficits. Here, the authors take advantage of the synergetic effect behind a sequential fluoride and organic ammonium salt surface passivation strategy to control non-radiative energy losses, and obtained a 17.7% efficiency in infrared-transparent wide-gap perovskite solar cells (21.1% for opaque device), and achieved efficiencies of over 25% when stacked with commercial Si and CIGS products with original PCEs of 18–20% under a 4-terminal working condition.

36 MATERIALS SCIENCE↗
NASA NTRS1991

GaInP2/GaAs tandem cells for space applications

The monolithic, tunnel-junction-interconnected tandem combination of a GaInP2 top cell and a GaAs bottom cell has achieved a one-sun, AM1.5 efficiency of 27.3 percent. With proper design of the top cell, air mass zero (AM0) efficiencies greater than 25 percent are possible. A description and the advantages of this device for space applications are presented and discussed. The advantages include high-voltage, low-current, two-terminal operation for simple panel fabrication, and high conversion efficiency with low-temperature coefficient. Also, because the active regions of the device are Al-free, the growth of high efficiency devices is not affected by trace levels of O2 or H2O in the MOCVD growth system.

Olson, J. M.↗
DOE OSTI2021

Fabrication, Measurement, and Modeling of GaInP/GaAs Three-Terminal Cells and Strings

Three-terminal (3T) GaInP/GaAs solar cells are fabricated from inverted-grown monolithic tandems and processed with external metal contacts suitable for easy interconnection. Prototype 3T tandems both with and without tunnel junctions are demonstrated. They are characterized as a function of two independent variables in a variety of configurations, with each configuration holding one of the contacts common to two source-meter units (SMUs). Each of these different measurement configurations completely characterizes the device by transforming the results into 6 unique device parameters and plotting the total power parametrically in two dimensions. The performance is fit using a 3T optoelectronic model that includes luminescent coupling as well as important resistances. Eight of these devices are interconnected in various voltage-constrained configurations to form voltage-matched (VM) strings. Measurement and analysis of these III-V devices and strings are generally applicable to all 3T photovoltaics.

photovoltaics↗
NASA NTRS1995

Monitoring Trace Contaminants in Air Via Ion Trap Mass Spectrometry

Recent passage of the Clean Air Act with its stricter regulation of toxic gas emissions, and the ever-growing number of applications which require faster turnaround times between sampling and analysis are two major factors which are helping to drive the development of new instrument technologies for in-situ, on-line, real-time monitoring. The ion trap, with its small size, excellent sensitivity, and tandem mass spectrometry capability is a rapidly evolving technology which is well-suited for these applications. In this paper, we describe the use of a commercial ion trap instrument for monitoring trace levels of chlorofluorocarbons (CFCs) and volatile organic compounds (VOCs) in air. A number of sample introduction devices including a direct transfer line interface, short column GC, and a cryotrapping interface are employed to achieve increasing levels of sensitivity. MS, MS/MS, and MS/MS/MS methods are compared to illustrate trade-offs between sensitivity and selectivity. Filtered Noise Field (FNF) technology is found to be an excellent means for achieving lower detection limits through selective storage of the ion(s) of interest during ionization. Figures of merit including typical sample sizes, detection limits, and response times are provided. The results indicate the potential of these techniques for atmospheric assessments, the High Speed Research Program, and advanced life support monitoring applications for NASA.

Palmer, Peter T.↗
DOE OSTI2021

Optical and Electronic Losses Arising from Physically Mixed Interfacial Layers in Perovskite Solar Cells

Perovskite solar cell device performance is affected by optical and electronic losses. To minimize these losses in solar cells, it is important to identify their sources. Here, we report the optical and electronic losses arising from physically mixed interfacial layers between the adjacent component materials in highly efficient two terminal (2T) all-perovskite tandem, single junction wide-bandgap, and single junction narrow-bandgap perovskite-based solar cells. Physically mixed interfacial layers as the sources of optical and electronic losses are identified from spectroscopic ellipsometry measurements and data analysis followed by comparisons of simulated and measured external quantum efficiency spectra. Parasitic absorbance in the physically mixed regions between silver metal electrical contacts and electron transport layers (ETLs) near the back contact and a physical mixture of commercial indium tin oxide and hole transport layers (HTL) near the front electrical contact lead to substantial optical loss. Here, a lower-density void + perovskite nucleation layer formed during perovskite deposition at the interface between the perovskite absorber layer and the HTL causes electronic losses due to incomplete collection of photogenerated carriers likely originating from poor coverage and passivation of the initially nucleating grains.

14 SOLAR ENERGY↗
DOE OSTI2023

Ion-beam assisted sputtering of titanium nitride thin films

Abstract Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. This work aims to explore effects in ion beam-assisted sputtering (IBAS), were an observed increase in nominal critical temperature and upper critical fields are in tandem with previous work on Niobium nitride (NbN). We grow thin films of titanium nitride by both, the conventional method of DC reactive magnetron sputtering and the IBAS method, to compare their superconducting critical temperatures $$T_{c}$$ T c as functions of thickness, sheet resistance, and nitrogen flow rate. We perform electrical and structural characterizations by electric transport and x-ray diffraction measurements. Compared to the conventional method of reactive sputtering, the IBAS technique has demonstrated a 10% increase in nominal critical temperature without noticeable variation in the lattice structure. Additionally, we explore the behavior of superconducting $$T_c$$ T c in ultra-thin films. Trends in films grown at high nitrogen concentrations follow predictions of mean-field theory in disordered films and show suppression of superconducting $$T_c$$ T c due to geometric effects, while nitride films grown at low nitrogen concentrations strongly deviate from the theoretical models.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Novel Chalcopyrites for Advanced Photoelectrochemical Water Splitting

With the support of DoE’s EERE office, our team has established a unique tool-chest of capabilities, including theoretical modeling (Lawrence Livermore National Laboratory: LLNL), state-of-the-art synthesis (Hawaii Natural Energy Institute: HNEI, Stanford, and the National Renewable Energy Laboratory: NREL) and advanced materials and interfaces characterization (University of Nevada, Las Vegas: UNLV, and Lawrence Berkeley National Laboratory: LBNL), to accelerate the development of high efficiency and durable chalcopyrite materials for advanced photoelectrochemical (PEC) water splitting. Using this synergistic approach, we have successfully created new wide bandgap chalcopyrite photocathodes generating over 10 mA/cm 2 , developed innovative strategies to protect them from corrosion, and engineered novel integration methods to circumvent thin film materials mechanical, chemical and thermal incompatibility. In Task 1 “Modeling and synthesis of chalcopyrite photocathodes”, we expanded our library of wide bandgap chalcopyrites for PEC water splitting. With support from LLNL’s “Computational Materials Diagnostics and Optimization of PEC Devices”, LBNL’s “photophysical” and NREL’s “I-III-VI Compound Semiconductors for Water-Splitting” nodes, we investigated two new chalcopyrite candidates for PEC water splitting: Cu(In,Al)Se 2 and Cu(In,B)Se 2 . We also further developed ordered vacancy compounds, such as CuGa 3 Se 5 , with unprecedented durability during PEC waters splitting in acidic solutions. In Task 2 “Interfaces engineering for enhanced efficiency and durability”, we addressed both the non-ideal band-edge positions of chalcopyrites with respect to water redox potentials, as well as their chemical instability under PEC water splitting, with a buried-junctions approach. With help from NREL’s “High-Throughput Experimental Thin Film Combinatorial Capabilities” and “Corrosion Analysis of Materials” nodes, we engineered environmentally friendly n-type buffers, including Mn x Zn 1-x O, to adjust the chalcopyrite band-edge positions and achieved photovoltages as high as 925 mV. Also, we integrated non-precious catalytic-protecting layers, such as WO 3 , to enhance the water splitting long-term stability of chalcopyrite absorbers. Finally, in Task 3 “Hybrid photoelectrode device integration”, we proposed an innovative method to bond wide bandgap photocathodes onto narrow bandgap PV drivers at room temperature using conductive polymers. Our semi-monolithic approach addressed fundamental processing incompatibility issues, as both the photocathode and the PV driver are processed separately. Proof-of-concept whole-chalcopyrite tandems were obtained by consecutive exfoliation and transfer of fully integrated 1.85 eV CuGa 3 Se 5 and 1.13 eV CuInGaSe 2 stacks from their Mo/SLG substrates onto a new single FTO host substrate.

08 HYDROGEN↗
NASA NTRS1980

Space solar cells - High efficiency and radiation damage

The proceedings of the Third Solar Cell High Efficiency and Radiation Damage Meeting are outlined. The topics covered included high efficiency silicon solar cells, silicon solar cell radiation damage, GaAs solar cell performance, and 30 percent conversion devices. The study of radiation damage from a fundamental defect-centered basis is discussed and evaluated as a focus of future work. 18% AM0 efficiency and 0.7 V open-circuit voltages are designated as achievable goals for silicon solar cells, and the potential for 30% AM0 efficiencies from monolithic tandem cell designs without sunlight concentration is noted. In addition to its potential for 20% AM0 efficiencies, the GaAs cell offers the possibility of a radiation-insensitive power supply when operated at temperatures near 200 C.

Brandhorst, H. W., Jr.↗
DOE OSTI2022

Vapor–Fed Electrolyzers for Carbon Dioxide Reduction Using Tandem Electrocatalysts: Cuprous Oxide Coupled with Nickel–Coordinated Nitrogen–Doped Carbon

We report ethylene is particularly attractive due to its major importance as a feedstock for various applications including the polymer industry. As such, catalyst and electrolyzer developments are crucial to achieve industrially relevant ethylene production and efficiency levels. In this work, a tandem electrocatalyst composed of copper nanocubes and nickel-coordinated nitrogen-doped carbon (NiNC) is presented, which is integrated into gas diffusion electrodes (GDEs) for direct conversion of vapor-fed CO 2 into ethylene. Evaluation of tandem GDEs in the vapor-fed flow electrolyzer shows significantly increased ethylene selectivity in terms of faradaic efficiency and C 2 H 4 /CO ratio compared to a non-tandem copper GDE. The enhancements are attributed to the increased local CO availability near the copper surface via effective CO 2 to CO conversion on neighboring NiNC. The experimental results are validated by 3D resolved continuum simulations, which show increased flux of higher-order prod-ucts with the added CO flux from NiNC. The practical viability of Cu/NiNC catalyst is further evaluated in a membrane electrode assembly electrolyzer, achieving 40% FE toward ethylene at 150 mA cm -2 and 3.2 V. These find-ings highlight the high selectivity and formation rate of ethylene achieved by successful device integration of the Cu/NiNC catalyst, demonstrating the potential for implementation in large-scale sustainable CO 2 electrolyzers.

36 MATERIALS SCIENCE↗