Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature programmed desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Thermal stability of Li films on polycrystalline molybdenum substrates

Lithium (Li) coatings on plasma facing components (PFCs) have been proposed as potential solutions to first wall and divertor challenges in tokamak fusion reactors. We report on the thermal behavior of ultrathin pure Li films deposited on polycrystalline substrates of molybdenum (Mo) and a molybdenum alloy (titanium zirconium molybdenum, TZM). These Li films were studied under controlled ultrahigh vacuum (UHV) conditions and thermal stabilities were primarily compared via temperature programmed desorption (TPD) measurements. In addition, on TZM, which is of particular interest, we obtained additional spectroscopic data using Auger electron spectroscopy (AES) and low energy ion scattering (LEIS) to further characterize the film structure and composition. Here, the monolayer of Li in these films in contact with the substrate is bound much stronger than in bulk Li films, and thermally desorbs at much higher temperatures. Interfacial Li on Mo(poly) has a higher thermal stability than that on TZM(poly), where the limiting values for the desorption activation energies, E d , are 3.56 and 2.84 eV, respectively, in the low coverage, high temperature desorption tail. LEIS indicates some clustering or interdiffusion of the Li films on the TZM substrate at 500 K. No appreciable irreversible absorption of Li occurs on Mo or TZM under the conditions of these experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of Polyatomic Molecule Formation on an Icy Grain Analog Using Fast Atoms

Carbon dioxide has been produced from the impact of a monoenergetic O(P-3) beam upon a surface cooled to 4.8 K and covered with a CO ice. Using temperature-programmed desorption and mass spectrometer detection, we have detected increasing amounts of CO2 formation with O(P-3) energies of 2, 5, 10, and 14 eV. This is the first measurement of polyatomic molecule formation on a surface with superthermal atoms. The goal of this work is to detect other polyatomic species, such as CH3OH, which can be formed under conditions that simulate the grain temperature, surface coverage, and superthermal atoms present in shock-heated circumstellar and interstellar regions.

Chutjian, A.↗

Oxygen Coverage Dependence of NO Oxidation on Pt(111)

The interaction of NO with adsorbed atomic oxygen on Pt(111) was studied with temperature programmed desorption (TPD), infrared reflection absorption spectroscopy (IRAS) and low energy electron diffraction (LEED). Atomic oxygen adlayers with 0.25 and 0.75 ML coverages were prepared on a Pt(111) single crystal by dissociative chemisorption of O2 at 300 K and NO2 at 400 K, respectively. These two oxygen pre-covered surfaces were used to study the oxygen coverage dependence of NO oxidation at different sample temperatures. The well ordered p(2x2)-O layer, corresponding to ΘO = 0.25 ML, does not react with NO to form NO2 in the temperature range of 350 - 500 K, in contrast to CO oxidation which takes place readily at a sample temperature as low as 300 K. At ΘO = 0.75 ML, however, the NO oxidation reaction is facile, and the formation of NO2 is observed even at 150 K. However, the NO oxidation reaction completely stops as the atomic oxygen coverage drops below 0.28 ML, because all the weakly bound oxygen atoms available only at higher O coverages have been consumed. The remaining oxygen atoms are bound too strongly to the Pt(111) surface and, therefore, unable to participate in NO oxidation in the 150 – 500 K temperature range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical Reactivity of Reduced TiO2(110): The dominant role of surface defects in oxygen chemisorption

O2 chemisorption on reduced, rutile TiO2(110) with various concentrations of oxygen vacancies (Ov) and bridging hydroxyls (OHb) is investigated with scanning tunneling microscopy, temperature programmed desorption and electron-stimulated desorption. On the annealed surface, 2 oxygen molecules can be chemisorbed per Ov. The same amount of O2 chemisorbs on surfaces where each Ov is converted to two OHb’s by exposure to water (i.e. 1 O2 per OHb). Surfaces with few or no Ov’s or OHb’s can be created by exposing the hydroxylated surface to O2 at room temperature, and the amount of O2 that chemisorbs on these surfaces at low temperatures is only ~20% of the amount on the annealed (reduced) surface. In contrast, the amount of chemisorbed O2 increases by more than a factor of two when the OHb concentration is enhanced – without changing the concentration of sub-surface Ti interstitials. The results indicate that the reactivity of TiO2(110) is primarily controlled by the amount of electron-donating surface species such as Ov’s and/or OHb’s, and not Ti3+ interstitials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-step synthesis of hydrothermally stable mesoporous aluminosilicates with strong acidity

Using tetraethylorthosilicate (TEOS), polymethylhydrosiloxane (PMHS) and aluminium isopropoxide (AIP) as the reactants, through a one-step nonsurfactant route based on PMHS-TEOS-AIP co-polycondensation, hydrothermally stable mesoporous aluminosilicates with different Si/Al molar ratios were successfully prepared. All samples exclusively showed narrow pore size distribution centered at 3.6 nm. To assess the hydrothermal stability, samples were subjected to 100 deg. C distilled water for 300 h. The boiled mesoporous aluminosilicates have nearly the same N{sub 2} adsorption-desorption isotherms and the same pore size distributions as those newly synthesized ones, indicating excellent hydrothermal stability. The {sup 29}Si MAS NMR spectra confirmed that PMHS and TEOS have jointly condensed and CH{sub 3} groups have been introduced into the materials. The {sup 27}Al MAS NMR spectra indicated that Al atoms have been incorporated in the mesopore frameworks. The NH{sub 3} temperature-programmed desorption showed strong acidity. Due to the existence of large amount of CH{sub 3} groups, the mesoporous aluminosilicates obtained good hydrophobicity. Owing to the relatively large pore and the strong acidity provided by the uniform four-coordinated Al atoms, the excellent catalytic performance for 1,3,5-triisopropylbenzene cracking was acquired easily. The materials may be a profitable complement for the synthesis of solid acid catalysts. - Graphical abstract: Based on the nonsurfactant method, a facile one-step synthesis route has been developed to prepare methyl-modified mesoporous aluminosilicates that possessed hydrothermal stability and strong acidity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Polymer Architecture in CO 2 Capture from Air Using Supported Poly(alkylenimine)s: Linear vs Branched Polymers

Direct air capture (DAC) of CO 2 coupled with geologic storage is a promising climate change mitigation strategy, with some applications employing amines supported on porous solids as CO 2 sorbents. While branched poly(ethylenimine) (PEI) is the standard benchmark amine material, it suffers from limited oxidative stability. Poly(propylenimine) (PPI), as an alternative, has previously demonstrated improved resistance to degradation under harsh oxidative conditions. Linear and branched PEI are commercially available, though at different molecular weights, while PPI is not commercially available. For this reason, a comparative study of all four polymers (linear PEI, branched PEI, linear PPI, branched PPI) has not been reported for DAC. In this study, we synthesize and compare low-molecular-weight (∼800 g/mol) linear (L) and branched (B) PEI and PPI supported on a model support, SBA-15 silica. These materials are evaluated for CO 2 adsorption under dry, DAC-relevant conditions (400 ppm of CO 2 , 30 °C). LPPI exhibited the highest amine efficiency at all loadings, reaching a maximum of 0.14 mmol CO 2 /mmol N, outperforming BPEI, while LPEI consistently showed the lowest uptake capacity. Temperature-programmed desorption reveals that the structure of the amine polymer impacts the CO 2 binding strength, with branched polymers displaying higher desorption energies of 102−111 kJ/mol. In situ infrared spectroscopy experiments show that all sorbents preferentially capture CO 2 as ammonium carbamate. Isobaric CO 2 uptake studies further underscore the influence of polymer mobility and support pore crowding on performance, while demonstrating the sorbents’ performance at elevated temperatures and CO 2 concentrations. All materials demonstrated good stability over 25 adsorption−desorption cycles using thermal regeneration in an inert gas purge, with only BPPI displaying a 10−11% decrease in capacity/amine efficiency during cycling, possibly due to the loss of low molecular weight, oligomeric amines. This is the first side-by-side comparison of the CO 2 sorption properties of linear and branched PEI and PPI with similar molecular weights. These findings highlight the significant role of polymer architecture in CO 2 capture efficiency and inform future designs of durable, high-performance DAC sorbents.

adsorbents↗

Photooxidation and Photodesorption in the Photochemistry of Isobutene on TiO2(110)

The photochemistry of isobutene was examined on the rutile TiO2(110) surface as a function of the surface pretreatment condition and irradiation temperature using temperature programmed desorption (TPD) and photon stimulated desorption (PSD). Isobutene adsorbs molecularly on the clean TiO2(110) surface without detectable thermal decomposition. Preadsorption of oxygen, either as atoms or chemisorbed molecules, did not promote thermal reactions with isobutene, but instead blocked isobutene adsorption sites. Ultraviolet (UV) light irradiation of isobutene adsorbed on the clean surface led to depletion through photodesorption without significant photodecomposition. Isobutene PSD yields increased with increasing surface temperature suggesting that activated molecules sample their physisorbed potential energy surface during photodesorption. Preadsorption of oxygen promoted partial photooxidation of adsorbed isobutene to acetone, methacrolein and isobutanal. Acetone was only detected when molecular oxygen was present, indicating that O2 addition occurred across the C=C bond. In contrast, results from use of D6-isobutene indicated that coadsorption with either O adatoms or O2 molecules led to photochemical production of methacrolein (and likely isobutanal) through C-H bond cleavage on a methyl group. Irradiation an adlayer comprised of isobutene isolated from the surface by 1 ML of preadsorbed O2 showed the most photoconversion of isobutene, which suggests that photoactivation of adsorbed O2 is a key step in partial photooxidation of isobutene. Comparison of the isobutene PSD and oxidation product yields as a function of surface temperature between 20 and 120 K indicates a competition between photooxidation and photodesorption that varies with temperature. ‘Direct’ charge transfer events between isobutene and the surface, favored at higher temperature, compete with partial oxidation pathways initiated by ‘indirect’ activation of isobutene by O2, which is favored at low temperature. Access of O2 to the surface is critical to achieving desired isobutene photooxidation rates and products, and isobutene photodesorption may provide a means of regulating the isobutene surface coverage. Work reported here was supported by the U.S. Department of Energy, Office of Basic Energy Science, Division of Chemical Sciences, Geosciences, and Biosciences, and performed in the Williams R. Wiley Environmental Molecular Science Laboratory (EMSL), a Department of Energy user facility funded by the Office of Biological and Environmental Research. Pacific Northwest National Laboratory is a multiprogram national laboratory operated for the U.S. Department of Energy by the Battelle Memorial Institute under contract DEAC05-76RL01830.

Environmental Molecular Sciences Laboratory↗

Low Temperature Oxidation of Fe2+ Surface Sites on the (2x1) Reconstructed Surface of α-Fe2O3(01(1) over-bar2)

Temperature programmed desorption (TPD), electron energy loss spectroscopy (ELS) and low energy electron diffraction (LEED) were used to study the interaction of molecular oxygen with the (2x1) reconstructed surface of hematite α-Fe2O3(011bar2) under UHV conditions. The (2x1) surface is formed from vacuum annealing of the ‘ideal’ (1x1) surface and likely possesses Fe2+ surface sites. While O2 does not stick to the (1x1) surface at 120 K and high temperature, the amount of O2 adsorbed at 120 K on the (1x2) surface that can be recovered in TPD was estimated to be ~0.5 ML, with additional O2 irreversibly adsorbed based on subsequent H2O TPD. Molecularly and dissociatively adsorbed O2 is seen to modify the surface chemistry of H2O both in the form of stabilized OH groups and blocking of H2O adsorption sites. While O2 adsorption at low temperature does not transform the (2x1) surface into the (1x1) surface, the influence of O2 on the (2x1) surface involves both charge transfer from surface Fe2+ sites and formation of an ordered c(2x2) structure resulting from O2 dissociation.

36 MATERIALS SCIENCE↗

The use Na, Li, K cations for modification of ZSM-5 zewolite to control hydrocarbon cold-start emission

This paper addresses the problem of controlling hydrocarbon emissions from cold-start of engines by investigating the adsorbents which could adsorb the hydrocarbons at cold temperatures and hold them to 250-300 ?. The materials, that has been studied, are based on the modification of ZSM-5 (SiO{sub 2}/Al{sub 2}O{sub 3} = 35) zeolite with Li, K, Na cations. It has been shown that the introduction of Li, Na and K in an amount that is equivalent to the content of Al in zeolite results in occurrence of toluene temperature desorption peaks at high-temperatures. The toluene temperature desorption curves for 5%Li-ZSM-5 and 2.3%Na-ZSM-5 zeolites are identical and have peak toluene desorption rate between 200 to 400 ?. Upon analysis of toluene adsorption isotherms for 2.3%Na-ZSM-5 and 5%Li-ZSM-5, it was concluded that the toluene diffusion inside of the modified zeolites channels is extremely slow and the sorption capacity of 2.3%Na-ZSM-5 is higher than with 5%Li-ZSM-5. The 2.3%Na-ZSM-5 didn't change toluene temperature programmed desorption (TPD) rate of curve after the treatment in environment with 10% ?{sub 2}? at 750-800 ? for about 28 h. The 2.3%Na-ZSM-5 zeolite is very promising as adsorbent to control the cold-start hydrocarbon emissions.

42 ENGINEERING↗

An Unbalanced Battle in Excellence: Revealing Effect of Ni/Co Occupancy on Water Splitting and Oxygen Reduction Reactions in Triple–Conducting Oxides for Protonic Ceramic Electrochemical Cells

Porous electrodes that conduct electrons, protons, and oxygen ions with dramatically expanded catalytic active sites can replace conventional electrodes with sluggish kinetics in protonic ceramic electrochemical cells. In this work, a strategy is utilized to promote triple conduction by facilitating proton conduction in praseodymium cobaltite perovskite through engineering non-equivalent B-site Ni/Co occupancy. Surface infrared spectroscopy is used to study the dehydration behavior, which proves the existence of protons in the perovskite lattice. The proton mobility and proton stability are investigated by hydrogen/deuterium (H/D) isotope exchange and temperature-programmed desorption. It is observed that the increased nickel replacement on the B-site has a positive impact on proton defect stability, catalytic activity, and electrochemical performance. This doping strategy is demonstrated to be a promising pathway to increase catalytic activity toward the oxygen reduction and water splitting reactions. The chosen PrNi 0.7 Co 0.3 O 3–δ oxygen electrode demonstrates excellent full-cell performance with high electrolysis current density of –1.48 A cm –2 at 1.3 V and a peak fuel-cell power density of 0.95 W cm –2 at 600 °C and also enables lower-temperature operations down to 350 °C, and superior long-term durability.

08 HYDROGEN↗

Coadsorption of Formic Acid and Hydrazine on Cu(110) Single-Crystal Surfaces

The chemistry of coadsorbed formic acid and hydrazine on Cu(110) surfaces was characterized both experimentally, by temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS), and theoretically, via density functional theory (DFT) calculations. It was found that the two reactants interact with each other via hydrogen bonds, and that this modifies their individual thermal chemistry on the surface in two main ways: by stabilizing a HCOOH:N 2 H 4 adduct, which desorbs molecularly at around 240 K, and by slightly delaying the decomposition of the hydrazine to higher temperatures and shifting the selectivity of that step from dehydrogenation and formation of N 2 H x (ads) species to scission of the N–N bond and ammonia production. The coadsorbed formic acid was determined to react at higher temperatures than hydrazine, in chemistry not affected by the latter, which is no longer present on the surface at that stage. One interesting aspect of this chemistry revealed by the DFT calculations is that formic acid may preferentially H-bond on top of adsorbed hydrazine rather than directly attach to the copper surface. The implications of these results to atomic layer deposition (ALD) processes are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Chemistry of Trimethyl Phosphate on α-Fe2O3

The chemistry of trimethyl phosphate (TMP) was examined on the (012) crystallographic face of hematite (α-Fe2O3) using temperature programmed desorption (TPD), high resolution electron energy loss spectroscopy (HREELS), static secondary ion mass spectrometry (SSIMS) and Auger electron spectroscopy (AES). TMP binds to Fe3+ sites on the clean α-Fe2O3(012) surface through lone pairs on the P=O oxygen atom. A small portion of adsorbed TMP desorbs without decomposition, however, the majority of adsorbed TMP decomposes in a two step process on the clean surface. The first step, occurring at or below room temperature (RT), likely involves displacement or substitution of one –OCH3 group to form surface methoxy groups and adsorbed dimethyl phosphate (DMP). In the second step, DMP decomposes above 500 K to a 1:1 ratio of gaseous methanol and formaldehyde with phosphate left on the surface. Identification of these steps was confirmed using the chemistry of methanol on the clean surface. Coadsorption of TMP and water led to a small degree of hydrolysis between these two molecules in the multilayer, but no significant change in the chemistry on the surface. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

10 SYNTHETIC FUELS↗

Interplay between Intrinsic Thermal Stability and Expansion Properties of Functionalized UiO-67 Metal–Organic Frameworks

The UiO family of metal-organic frameworks (MOFs) has been extensively studied for several applications owing to their high stability rendered by their robust secondary building units. The efficient design and use of these materials require a fundamental understanding of their thermal stability and its impact on chemical and structural functionality. In this work, we provide a detailed characterization of the intrinsic thermal behavior of the UiO-67 and functional analogues, UiO-67-NH 2 and UiO-67-CH 3 . Using in situ temperature-programmed X-ray diffraction, we find that distortion of the carboxylate group on the organic linker leads to negative thermal expansion (NTE) of the UiO-67 MOFs during heating. This NTE behavior is correlated with rich and reversible thermal changes observed in the MOF infrared spectral signature as samples are heated to the sample activation temperature (473 K). We find that in the absence of oxygen, activated UiO-67 samples show higher thermal stability compared to ambient or inert environments, with temperature-programmed desorption revealing an overall stability trend: UiO-67 > UiO-67- CH 3 > UiO-67-NH 2 . Two stages of change are observed during thermal treatment above 473 K, which are directly related to deformation of the inorganic node and the isotropic NTE behavior of these materials. Ultimately, these results provide a real-time interpretation of the fundamental thermoresponsive behavior of UiO-67 MOFs and offer a foundation for accurate interpretation of MOF interactions with guest molecules and their temperature dependence.

36 MATERIALS SCIENCE↗

Bifunctional application of lithium ferrites (Li 5 FeO 4 and LiFeO 2 ) during carbon monoxide (CO) oxidation and chemisorption processes. A catalytic, thermogravimetric and theoretical analysis

The CO oxidation and subsequent CO 2 chemisorption processes were evaluated using two lithium ferrites, Li 5 FeO 4 and LiFeO 2 , as possible catalytic and captor materials. The analysis of the bifunctional process was dynamic and isothermally evaluated using catalytic and thermogravimetric techniques, while solid final products were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption (TPD). These experiments were performed using a CO-O 2 mixture or only CO as gas flows. In addition, different ab initio thermodynamic calculations were performed to elucidate the theoretical viability of these processes. Thermogravimetric and catalytic results clearly showed that both lithium ferrites were able to perform the CO oxidation and CO 2 chemical capture. The efficiency and reaction mechanism varied as a function of the lithium ferrite (Li 5 FeO 4 or LiFeO 2 ), gas mixture and temperature. As it would be expected, Li 5 FeO 4 sample presented better chemisorption properties than LiFeO 2 , regardless the gas mixture employed (CO or CO+O 2 ). Moreover, catalytic tests showed that the reaction process was produced even in the oxygen absence. Here, in such a case, both lithium ferrites released the oxygen necessary for the oxidation process with a consequent iron reduction, as it was observed by XRD. Based on the obtained experimental and theoretical results, reaction mechanisms were proposed for each lithium ferrite into this bifunctional process. Finally, the best catalytic behavior was obtained with the Li 5 FeO 4 -CO-O 2 system, where high CO conversions (50–75%) were observed between 500–650 °C and T > 800 °C. Also according to TGA results, this system at T > 700 °C presented the highest ability for capture the CO 2 previously formed during the CO oxidation process (~45%).

01 COAL, LIGNITE, AND PEAT↗

Adsorption and Reaction of Methanol on Anatase TiO2(101) Single Crystals and Faceted Nanoparticles

Anatase TiO2 is used extensively in a wide range of heterogeneous and photocatalysis processes. As such, understanding its interactions with prototypical organics such as methanol is of high importance. In this study, we employ a cross-disciplinary approach and study adsorption and dissociation of methanol on the (101) surfaces of anatase TiO2 single crystals (SCs) and faceted nanoparticles (F-NPs). While scanning tunneling microscopy was used to follow the spatial distribution of adsorbed methanol molecules and methoxy and hydroxy species on SC TiO2(101), comparative temperature programmed desorption and infrared reflection absorption spectroscopy measurements were performed on both SC and F-NP TiO2(101). We find that adsorption of molecular methanol at 80 K on SC TiO2(101) leads to the formation of chains along the titania rows. These chains are metastable and fall apart upon annealing due to the repulsion of neighboring molecules. Further, we find that on SC TiO2(101) methanol deprotonates to produce neighboring methoxy and hydroxyl groups following the annealing of high coverages to room temperature (RT). The coverage of methoxy and hydroxyl groups can be increased with repeated adsorption and annealing cycles, and the annealing above room temperature leads to the recombinative desorption of methanol. On F-NP TiO2(101) surfaces, we find that methanol adsorbs both molecularly and dissociatively at RT. With increasing temperature, molecularly adsorbed methanol gradually converts to methoxy. Therefore, parallel behavior in adsorption and surface reaction is found on both SC and F-NP TiO2(101). An added layer of complexity for the latter is that Ti-OH groups on the nanoparticle surfaces, likely associated with defects, also play an important role in methanol adsorption and surface reaction.

oxides, alcohols, adsorption, scanning, tunneling,↗

Morphology and reactivity of size-selected titanium oxide nanoclusters on Au(111)

The morphology and reactivity of mass-selected titania clusters, Ti 3 O 6 and Ti 3 O 5 , deposited onto Au(111) were studied by scanning tunneling microscopy (STM) and temperature programmed desorption (TPD). Despite differing by only one oxygen atom, the stoichiometric Ti 3 O 6 and the sub-stoichiometric (“reduced”) Ti 3 O 5 clusters exhibit very different structures and preferred binding sites. The Ti 3 O 6 clusters preferentially bind at step edges and form small assemblies (2-4 clusters) on Au terraces, while the “reduced” Ti 3 O 5 clusters form much larger fractal-like assemblies that can extend across step boundaries. Annealing the Ti 3 O 5,6 /Au(111) systems to higher temperatures causes changes in the size-distributions of cluster assemblies but does not lead to the formation of TiO x nanoislands for temperatures ≤ 700 K. Reactivity studies show that the reduced Ti 3 O 5 cluster has higher activity than Ti 3 O 6 for 2-propanol dehydration, although both clusters exhibit substantial activity for dehydrogenation to acetone. Calculations using DFT+U suggest that the differences in aggregate morphology and reactivity are associated with the number of undercoordinated Ti 3c sites in the supported clusters.

36 MATERIALS SCIENCE↗

Comprehensive investigation of HgCdTe metalorganic chemical vapor deposition

The principal objective of this experimental and theoretical research program was to explore the possibility of depositing high quality epitaxial CdTe and HgCdTe at very low pressures through metalorganic chemical vapor deposition (MOCVD). We explored two important aspects of this potential process: (1) the interaction of molecular flow transport and deposition in an MOCVD reactor with a commercial configuration, and (2) the kinetics of metal alkyl source gas adsorption, decomposition and desorption from the growing film surface using ultra high vacuum surface science reaction techniques. To explore the transport-reaction issue, we have developed a reaction engineering analysis of a multiple wafer-in-tube ultrahigh vacuum chemical vapor deposition (UHV/CVD) reactor which allows an estimate of wafer or substrate throughput for a reactor of fixed geometry and a given deposition chemistry with specified film thickness uniformity constraints. The model employs a description of ballistic transport and reaction based on the pseudo-steady approximation to the Boltzmann equation in the limit of pure molecular flow. The model representation takes the form of an integral equation for the flux of each reactant or intermediate species to the wafer surfaces. Expressions for the reactive sticking coefficients (RSC) for each species must be incorporated in the term which represents reemission from a wafer surface. The interactions of MOCVD precursors with Si and CdTe were investigated using temperature programmed desorption (TPD) in ultra high vacuum combined with Auger electron spectroscopy (AES). These studies revealed that diethyltellurium (DETe) and dimethylcadmium (DMCd) adsorb weakly on clean Si(100) and desorb upon heating without decomposing. These precursors adsorb both weakly and strongly on CdTe(111)A, with DMCd exhibiting the stronger interaction with the surface than DETe.

Raupp, Gregory B.↗

Crystallization Kinetics and Excess Free Energy of H2O and D2O Nanoscale Films of Amorphous Solid Water

Temperature-programmed desorption (TPD) and reflection absorption infrared spectroscopy (RAIRS) are used to investigate the crystallization kinetics and measure the excess free energy of metastable amorphous solid water films (ASW) of H2O and D2O grown using molecular beams. The desorption rates from the amorphous and crystalline phases of ASW are distinct, and as such, crystallization manifests can be observed in the TPD spectrum. The crystallization kinetics were studied by varying the TPD heating rate from 0.001 to 3 K/s. A coupled desorptioncrystallization kinetic model accurately simulates the desorption spectra and accurately predicts the observed temperature shifts in the crystallization. Isothermal crystallization studies using RAIRS are in agreement with the TPD results. Furthermore, highly sensitive measurements of the desorption rates were used to determine the excess free energy of ASW near 150 K. The excess entropy obtained from these data are consistent with there being a thermodynamic continuity between ASW and supercooled liquid water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗