SEARCH · Search NASA

Results for “time-dependent numerical methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Studies of pressure-velocity coupling schemes for analysis of incompressible and compressible flows

Two pressure-velocity coupling schemes, both of which solve the fully implicit discretized equations governing the flow of fluids were examined, and the capability of performing large Reynolds number, low Mach number compressible flow calculations were assessed. The semi-implicit iterative SIMPLE algorithm is extended to handle transient compressible flow calculations. This extension takes into account a strong coupling between the pressure and temperature through a correction procedure, based on the equations of state. Results obtained from the extended SIMPLE algorithm are then compared to similar results obtained from the non-iterative PISO algorithm. Both time-dependent and steady state calculations were performed using an axisymmetric 2:1 pipe expansion geometry and laminar flow conditions corresponding to Reynolds number of 1000 and Mach number of 2.0. For calculations simulating a time-dependent compression/expansion process, both schemes exhibit transient features in excellent agreement with each other, and moreover, the PISO method shows a significant computational time reduction of 60 percent over the SIMPLE scheme, regardless of the time step size or grid size employed. The effects of numerical diffusion are shown to be significant in these calculations. For steady state compressible flows, however, the SIMPLE algorithm displays increasing computational efficiency over the PISO method as the time step sizes employed to reach steady state conditions are decreased.

Burgreen, Gregory Wayne↗

NASA NTRS1988

Estimation of time- and state-dependent delays and other parameters in functional differential equations

A parameter estimation algorithm is developed which can be used to estimate unknown time- or state-dependent delays and other parameters (e.g., initial condition) appearing within a nonlinear nonautonomous functional differential equation. The original infinite dimensional differential equation is approximated using linear splines, which are allowed to move with the variable delay. The variable delays are approximated using linear splines as well. The approximation scheme produces a system of ordinary differential equations with nice computational properties. The unknown parameters are estimated within the approximating systems by minimizing a least-squares fit-to-data criterion. Convergence theorems are proved for time-dependent delays and state-dependent delays within two classes, which say essentially that fitting the data by using approximations will, in the limit, provide a fit to the data using the original system. Numerical test examples are presented which illustrate the method for all types of delay.

Murphy, K. A.↗

NASA NTRS1987

A global time-dependent model of thunderstorm electricity. I - Mathematical properties of the physical and numerical models

A time-dependent model is introduced that can be used to simulate the interaction of a thunderstorm with its global electrical environment. The model solves the continuity equation of the Maxwell current, which is assumed to be composed of the conduction, displacement, and source currents. Boundary conditions which can be used in conjunction with the continuity equation to form a well-posed initial-boundary value problem are determined. Properties of various components of solutions of the initial-boundary value problem are analytically determined. The results indicate that the problem has two time scales, one determined by the background electrical conductivity and the other by the time variation of the source function. A numerical method for obtaining quantitative results is introduced, and its properties are studied. Some simulation results on the evolution of the displacement and conduction currents during the electrification of a storm are presented.

Browning, G. L.↗

NASA NTRS1988

A solution method for the unsteady incompressible Navier-Stokes equations in generalized coordinate systems

A solution method based on a fractional step approach is developed for obtaining time-dependent solutions of the three-dimensional, incompressible Navier-Stokes equations in generalized coordinate systems. The governing equations are discretized conservatively by finite volumes using a staggered mesh system. The primitive variable formulation uses the volume fluxes across the faces of each computational cell as dependent variables. This procedure, combined with accurate and consistent approximations of geometric parameters, is done to satisfy the discretized mass conservation equation to machine accuracy as well as to gain favorable convergence properties of the Poisson solver. The discretized equations are second-order-accurate in time and space and no smoothing terms are added. An approximate-factorization scheme is implemented in solving the momentum equations. A novel ZEBRA scheme with four-color ordering is devised for the efficient solution of the Poisson equation. Several two and three-dimensional solutions are compared with other numerical and experimental results to validate the present method.

Rosenfeld, Moshe↗

NASA NTRS1989

A numerical study of a class of TVD schemes for compressible mixing layers

At high Mach numbers the two-dimensional time-developing mixing layer develops shock waves, positioned around large-scale vortical structures. A suitable numerical method has to be able to capture the inherent instability of the flow, leading to the roll-up of vortices, and also must be able to capture shock waves when they develop. Standard schemes for low speed turbulent flows, for example spectral methods, rely on resolution of all flow-features and cannot handle shock waves, which become too thin at any realistic Reynolds number. The performance of a class of second-order explicit total variation diminishing (TVD) schemes on a compressible mixing layer problem was studied. The basic idea is to capture the physics of the flow correctly, by resolving down to the smallest turbulent length scales, without resorting to turbulence or sub-grid scale modeling, and at the same time capture shock waves without spurious oscillations. The present study indicates that TVD schemes can capture the shocks accurately when they form, but (without resorting to a finer grid) have poor accuracy in computing the vortex growth. The solution accuracy depends on the choice of limiter. However a larger number of grid points are in general required to resolve the correct vortex growth. The low accuracy in computing time-dependent problems containing shock waves as well as vortical structures is partly due to the inherent shock-capturing property of all TVD schemes. In order to capture shock waves without spurious oscillations these schemes reduce to first-order near extrema and indirectly produce clipping phenomena, leading to inaccuracy in the computation of vortex growth. Accurate simulation of unsteady turbulent fluid flows with shock waves will require further development of efficient, uniformly higher than second-order accurate, shock-capturing methods.

Sandham, N. D.↗

NASA NTRS1989

Solution techniques for incompressible flow problems

A three-step Petrov-Galerkin (PG)/operator spliting scheme for the time-dependent incompressible Navier-Stokes equations is proposed. Each time step is split into two Stokes problems and one nonlinear convection-diffusion problem. Using a PG technique on the two outer Stokes problems ensures a stable scheme despite equal-order interpolation, while using a streamline upwind PG scheme on the inner convection-diffusion problem ensures a numerically stable solution at high Reynolds numbers. Numerical tests of this method have been carried out.

Tezduyar, T. E.↗

NASA NTRS1990

Computation of convective flow with gravity modulation in rectangular cavities

In this work, a computational study is presented for the investigation of gravity modulation (g-jitter) effects in thermally driven cavity flows at terrestrial and microgravity environments. The two-dimensional, time-dependent Navier-Stokes equations are numerically integrated by a time-split method using direct matrix solvers. Computations at terrestrial gravity are utilized to assess the effects of adiabatic side-wall boundary conditions as well as the full nonlinearity of the governing equations on the sinusoidally forced Benard problem studied by Gresho and Sani. The low-g calculations focus on the establishment of critical frequency ranges and consider the effects of modulation direction and randomness. The applicability of linear analysis in the excitable frequency range at low g is also discussed.

Biringen, S.↗

NASA NTRS1990

Estimation of time- and state-dependent delays and other parameters in functional differential equations

Murphy, K. A.↗

NASA NTRS1990

Development of a time-dependent incompressible Navier-Stokes solver based on a fractional-step method

The development, validation and application of a fractional step solution method of the time-dependent incompressible Navier-Stokes equations in generalized coordinate systems are discussed. A solution method that combines a finite-volume discretization with a novel choice of the dependent variables and a fractional step splitting to obtain accurate solutions in arbitrary geometries was previously developed for fixed-grids. In the present research effort, this solution method is extended to include more general situations, including cases with moving grids. The numerical techniques are enhanced to gain efficiency and generality.

Rosenfeld, Moshe↗

NASA NTRS1990

Development of a time-dependent incompressible Navier-Stokes solver based on a fractional-step method

The main goals are the development, validation, and application of a fractional step solution method of the time-dependent incompressible Navier-Stokes equations in generalized coordinate systems. A solution method that combines a finite volume discretization with a novel choice of the dependent variables and a fractional step splitting to obtain accurate solutions in arbitrary geometries is extended to include more general situations, including cases with moving grids. The numerical techniques are enhanced to gain efficiency and generality.

Rosenfeld, Moshe↗

NASA NTRS1990

Finite element thermo-viscoplastic analysis of aerospace structures

The time-dependent thermo-viscoplastic response of aerospace structures subjected to intense aerothermal loads is predicted using the finite-element method. The finite-element analysis uses the Bodner-Partom unified viscoplastic constitutive relations to determine rate-dependent nonlinear material behavior. The methodology is verified by comparison with experimental data and other numerical results for a uniaxially-loaded bar. The method is then used (1) to predict the structural response of a rectangular plate subjected to line heating along a centerline, and (2) to predict the thermal-structural response of a convectively-cooled engine cowl leading edge subjected to aerodynamic shock-shock interference heating. Compared to linear elastic analysis, the viscoplastic analysis results in lower peak stresses and regions of plastic deformations.

Pandey, Ajay K.↗

NASA NTRS1990

Finite-element thermo-viscoplastic analysis of aerospace structures

Pandey, Ajay↗

NASA NTRS1991

Numerical simulation of transition in wall-bounded shear flows

The current status of numerical simulation techniques for the transition to turbulence in incompressible channel and boundary-layer flows is surveyed, and typical results are presented graphically. The focus is on direct numerical simulations based on the full nonlinear time-dependent Navier-Stokes equations without empirical closure assumptions for prescribed initial and boundary conditions. Topics addressed include the vibrating ribbon problem, space and time discretization, initial and boundary conditions, alternative methods based on the triple-deck approximation, two-dimensional channel and boundary-layer flows, three-dimensional boundary layers, wave packets and turbulent spots, compressible flows, transition control, and transition modeling.

Kleiser, Leonhard↗

NASA NTRS1991

A fractional step solution method for the unsteady incompressible Navier-Stokes equations in generalized coordinate systems

The time-dependent, three-dimensional incompressible Navier-Stokes equations are presently solved in generalized coordinate systems by means of a fractional-step method whose primitive variable formulation uses as dependent variables, in place of the Cartesian components of the velocity: (1) pressure (defined at the center of the computational cell), and (2) volume fluxes across the faces of the cells. The momentum equations are solved by means of an approximate factorization method. A novel 'ZEBRA' scheme incorporating four-color ordering efficiently solves the Poisson equation. Illustrative two- and three-dimensional laminar flow test cases are computed and evaluated relative to extant numerical and experimental results, and good agreement is obtained.

Rosenfeld, Moshe↗

NASA NTRS1991

Multigrid for hypersonic viscous two- and three-dimensional flows

The use of a multigrid method with central differencing to solve the Navier-Stokes equations for hypersonic flows is considered. The time-dependent form of the equations is integrated with an explicit Runge-Kutta scheme accelerated by local time stepping and implicit residual smoothing. Variable coefficients are developed for the implicit process that remove the diffusion limit on the time step, producing significant improvement in convergence. A numerical dissipation formulation that provides good shock-capturing capability for hypersonic flows is presented. This formulation is shown to be a crucial aspect of the multigrid method. Solutions are given for two-dimensional viscous flow over a NACA 0012 airfoil and three-dimensional viscous flow over a blunt biconic.

Turkel, E.↗

NASA NTRS1991

A time-dependent incompressible viscous BEM for moderate Reynolds numbers

The boundary element method is applied to transient viscous incompressible flow. The time-domain formulation allows a boundary-only solution for linear Stokes flow. For higher speed flows in which the nonlinear convective effects cannot be ignored, a volume integral must be retained. However, the introduction of reference velocities often limits the nonlinear region to the vicinity of obstacles or boundary surfaces. Additionally, the volume terms are rewritten to eliminate the need for the calculation of velocity gradients. A general purpose numerical implementation of this new formulation then produces a very attractive tool for engineering analysis. This implementation includes a Newton-Raphson algorithm, permitting accurate solutions up to the moderate Reynolds number range. Several numerical examples are provided to validate the present approach.

Dargush, G. F.↗

NASA NTRS1992

Fractional-Step, Finite-Volume Computation Of Flow

Method of solving Navier-Stokes equations of incompressible flow in general nonorthogonal curvilinear coordinates incorporates fractional-step and finite-volume approaches. Developed in continuing effort to achieve accuracy without need for excessive computation time in numerical simulation of time-dependent, three-dimensional flows bounded by surfaces of complicated shape.

Kwak, Dochan↗

NASA NTRS1992

A numerical study of two-dimensional vortex shedding from rectangular cylinders

An efficient time-marching, non-iterative calculation method is used to analyze time-dependent flows around rectangular cylinders. The turbulent flow in the wake region of a square section cylinder is analyzed using an anisotropic k-epsilon model. Initiation and subsequent development of the vortex shedding phenomenon is naturally captured once a perturbation is introduced in the flow. Transient calculations using standard eddy-viscosity and an anisotropic k-epsilon model averaged over an integral number of cycles to get the fluctuating energy (organized and turbulent) are compared with experimental data. It is shown that the anisotropic k-epsilon model resolves the anisotropy of the Reynolds stresses and gives mean energy distribution closer to the experiment than the standard k-epsilon model.

Hadid, A. H.↗