Search NASA⌕ Search

SEARCH · Search NASA

Results for “trajectory data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

A Trajectory Algorithm to Support En Route and Terminal Area Self-Spacing Concepts: Fourth Revision

This document describes an algorithm for the generation of a four dimensional trajectory. Input data for this algorithm are similar to an augmented Standard Terminal Arrival (STAR) with the augmentation in the form of altitude or speed crossing restrictions at waypoints on the route. This version of the algorithm now accommodates routes that are totally in the cruise regime. The algorithm calculates the altitude, speed, along path distance, and along path time for each waypoint. Wind data at each of these waypoints are also used for the calculation of ground speed and turn radius.

Abbott, Terence S.↗

Cause of a Lower-Tropospheric High-Ozone Layer in Spring Over Hanoi

The ozonesonde observations in Hanoi, Vietnam, over fourteen years since 2004 have confirmed the enhancement in lower tropospheric ozone concentration at about 3 km altitude in the spring season. We investigated the evolution of the ozone enhancement from analysis of meteorological data, backward trajectories, and model sensitivity experiments. In spring, air masses over Hanoi exhibit strong height dependence. At 3km, the high-ozone air masses originate from the land area to the west of Hanoi, while low-ozone air masses below about 1.5 km are from the oceanic area to the east. Above 4 km, the air masses are mostly traced back to the farther west area. The chemical transport model simulations revealed that precursor emissions from biomass burning in the inland Indochina Peninsula have the largest contribution to the lower tropospheric ozone enhancement, which is transported upward and eastward and overhangs the clean air intrusion from the ocean to the east of Hanoi. At this height level, the polluted air has the horizontal extent of about 20 degrees in longitude and latitude. The polluted air observed in Hanoi is transported further east and widely spread over the northern Pacific Ocean.

tropospheric ozone↗

Cause of a Lower-Tropospheric High-Ozone Layer in Spring Over Hanoi

The ozonesonde observations in Hanoi, Vietnam, over fourteen years since 2004 have confirmed the enhancement in lower tropospheric ozone concentration at about 3 km altitude in the spring season. We investigated the evolution of the ozone enhancement from analysis of meteorological data, backward trajectories, and model sensitivity experiments. In spring, air masses over Hanoi exhibit strong height dependence. At 3km, the high-ozone air masses originate from the land area to the west of Hanoi, while low-ozone air masses below about 1.5 km are from the oceanic area to the east. Above 4 km, the air masses are mostly traced back to the farther west area. The chemical transport model simulations revealed that precursor emissions from biomass burning in the inland Indochina Peninsula have the largest contribution to the lower tropospheric ozone enhancement, which is transported upward and eastward and overhangs the clean air intrusion from the ocean to the east of Hanoi. At this height level, the polluted air has the horizontal extent of about 20 degrees in longitude and latitude. The polluted air observed in Hanoi is transported further east and widely spread over the northern Pacific Ocean.

Hanoi↗

A Trajectory Algorithm to Support En Route and Terminal Area Self-Spacing Concepts: Fifth Revision

This document describes an algorithm for the generation of a four dimensional trajectory. Input data for this algorithm are similar to an augmented Standard Terminal Arrival (STAR) with the augmentation in the form of altitude or speed crossing restrictions at waypoints on the route. The algorithm calculates the altitude, speed, along path distance, and along path time for each of these waypoints. Wind data at each of these waypoints are also used for the calculation of ground speed and turn radius. This revision of the algorithm now accommodates linear decelerations between two speed-constrained waypoints. While this modification may appear trivial, the calculation of the deceleration rate cannot be accomplished using a closed-form solution. An iterative solution was developed that allowed for the variability of path distance due to speed influence on turn radii, Mach-CAS transition altitude, and the impact of wind on ground speed in calculating an accurate deceleration value.

Aircraft Operations↗

Sensitivity of trajectory calculations to the temporal frequency of wind data

A mesoscale primitive equation model is used to create a 36-h simulation of the three-dimensional wind field of an intense maritime extratropical cyclone. The control experiment uses the simulated wind field every 15 min in a trajectory model to calculate back trajectories from various horizontal and vertical positions of interest relative to synoptic features of the storm. The latter trajectories are compared to trajectories that were calculated with the simulated wind data degraded in time to 30 min, 1 h, 3 h, 6h, and 12 h. Various error statistics reveal significant deterioration in trajectory accuracy between trajectories calculated with 1- and 3-h data frequencies. Trajectories calculated with 15-min, 30-min, and 1-h data frequencies yielded similar results, while trajectories calculated with data time frequencies 3 h and greater yielded results with unacceptably large errors.

Doty, Kevin G.↗

Exchange of Standardized Flight Dynamics Data

Spacecraft operations require the knowledge of the vehicle trajectory and attitude and also that of other spacecraft or natural bodies. This knowledge is normally provided by the Flight Dynamics teams of the different space organizations and, as very often spacecraft operations involve more than one organization, this information needs to be exchanged between Agencies. This is why the Navigation Working Group within the CCSDS (Consultative Committee for Space Data Systems), has been instituted with the task of establishing standards for the exchange of Flight Dynamics data. This exchange encompasses trajectory data, attitude data, and tracking data. The Navigation Working Group includes regular members and observers representing the participating Space Agencies. Currently the group includes representatives from CNES, DLR, ESA, NASA and JAXA. This Working Group meets twice per year in order to devise standardized language, methods, and formats for the description and exchange of Navigation data. Early versions of some of these standards have been used to support mutual tracking of ESA and NASA interplanetary spacecraft, especially during the arrival of the 2003 missions to Mars. This paper provides a summary of the activities carried out by the group, briefly outlines the current and envisioned standards, describes the tests and operational activities that have been performed using the standards, and lists and discusses the lessons learned from these activities.

standards↗

Optimal trajectories for an aerospace plane. Part 2: Data, tables, and graphs

Data, tables, and graphs relative to the optimal trajectories for an aerospace plane are presented. A single-stage-to-orbit (SSTO) configuration is considered, and the transition from low supersonic speeds to orbital speeds is studied for a single aerodynamic model (GHAME) and three engine models. Four optimization problems are solved using the sequential gradient-restoration algorithm for optimal control problems: (1) minimization of the weight of fuel consumed; (2) minimization of the peak dynamic pressure; (3) minimization of the peak heating rate; and (4) minimization of the peak tangential acceleration. The above optimization studies are carried out for different combinations of constraints, specifically: initial path inclination that is either free or given; dynamic pressure that is either free or bounded; and tangential acceleration that is either free or bounded.

Miele, Angelo↗

Shuttle /STS-1/ entry trajectory reconstruction

The methods and data used to reconstruct the Shuttle entry trajectory aerodynamics from 180 km to landing are reviewed. Onboard accelerometer and gyro measurements are used with a weighted least squares filter along with ground tracking data to provide the evolving spacecraft state. The software development is described, noting that computations include linear acceleration and angular rate data, aerodynamic coefficient, and inertial measurement units, sampled at 170 Hz. Ground tracking data was gathered on S- and C-bands; Guam data is considered critical as it was taken during the blackout at the beginning of entry. The generation of a best estimate trajectory, combining flight and ground data, yields inplane parameters of altitude, flight path angle, and velocity for comparison with navigational instrumentation. Predicted lift/drag ratios were found to be accurate from Mach 1-25, and up to 23% low below Mach 1.

Compton, H. R.↗

Optimal estimation of undersea acoustic transponder locations

Using principles from multilateration and optimal estimation theories an approach is derived for estimating the relative positions of three or more submerged and anchored acoustic transponders. The procedure is not constrained to processing range data collected at special points or on special trajectories. While the data normally collected over transponders and between transponder pairs can be processed, simultaneous ranges from anywhere on the surface to three or more transponders can also be processed. Simulated examples involving four stations in different geometries with different range collection schemes demonstrate the effectiveness of the procedure.

Carta, D. G.↗

Ascent air data system results from the space shuttle flight test program

The ascent air data system of the Space Shuttle consists of a simple biconic spike probe on the nose of the external tank. Pressure measurements were calibrated in a wind tunnel to obtain vehicle attitude and speed (relative to the air) and dynamic pressure. The wind tunnel test data analysis and the calibration are discussed in terms of test problems and calibration parameter formulation. The flight pressures are traced from telemetry data to final air data products. Analysis of the flight results showed that static pressure could not be accurately determined at the higher Mach numbers (above approx. 2.0). By replacing static pressure with data from a postflight estimated trajectory the ascent air data system performance met the user requirements. Lessons learned are enumerated, the most important being the need for a thorough systems integration effort.

Hillje, E. R.↗

Using Laser Altimetry to Detect Topographic Change in Long Valley Caldera, California

Long Valley caldera California, is a site of extensive volcanism, persistent seismicity, and uplift of a resurgent dome, currently at a rate of about 3 cm/year. Airborne laser altimetry was used to determine the surface topography of the region in 1993. A repeat mission occurred in 1995. Three different laser altimeters were flown, dubbed ATLAS, SLICER and RASCAL. Data processing consists of the combination of the aircraft trajectory and attitude data with the laser range, the determination of an atmospheric delay, laser pulse timing errors, laser system biases, and data geolocation to obtain the position of the laser spot on the ground. Results showed that using the ATLAS and SLICER instruments, the elevation of an overflown lake is determined to precisions of 3.3 cm and 2.9 cm from altitudes of 500 m and 3 km above the ground, and about 10 cm using the RASCAL instrument from 500 m above ground. Comparison with tide gauge data showed the laser measurements are able to resolve centimeter-level changes in the lake elevation over time. Repeat pass analysis of tracks over flat surfaces indicate no systematic biases affect the measurement procedure of the ATLAS and SLICER instruments. Comparison of GPS and laser-derived elevations of easily-identifiable features in the caldera confirm the horizontal accuracy of the measurement is within the diameter of the laser footprint, and vertical accuracy is within the error inherent in the measurement. Crossover analysis shows that the standard error of the means at track intersection points within the caldera, and dome (i.e., where zero and close to the maximum amount of uplift is expected) are about I cm, indicating elevation change at the 3 cm/year level should be detectable. We demonstrate one of the powerful advantages of scanning laser altimetry over other remote sensing techniques; the straightforward creation of precise digital elevation maps of overflown terrain. Initial comparison of the 1993-1995 data indicates uplift occurred, but filtering is required to remove vegetation effects. Although research continues to utilize the full potential of laser altimetry data, the results constitute a successful demonstration that the technique may be used to perform geodetic monitoring of surface topographic change.

Hofton, M. A.↗

Using Laser Altimetry to Detect Topographic Change at Long Valley Caldera, California

Long Valley caldera, California, is a site of extensive volcanism, persistent seismicity, and uplift of a resurgent dome, currently at a rate of approximately 3 cm/year. Airborne laser altimetry was used to determine the surface topography of the region in 1993. A repeat mission occurred in 1995. Three different laser altimeters were flown, dubbed ATLAS, SLICER and RASCAL. Data processing consists of the combination of the aircraft trajectory and attitude data with the laser range, the determination of an atmospheric delay, laser pulse timing errors, laser system biases, and data geolocation to obtain the position of the laser spot on the ground. Results showed that using the ATLAS and SLICER instruments, the elevation of an overflown lake is determined to precisions of 3.3 cm and 2.9 cm from altitudes of 500 m and 3 km above the ground, and approximately 10 cm using the RASCAL instrument from 500 m above ground. Comparison with tide gauge data showed the laser measurements are able to resolve centimeter-level changes in the lake elevation over time. Repeat pass analysis of tracks over flat surfaces indicate no systematic biases affect the measurement procedure of the ATLAS and SLICER instruments. Comparison of GPS and laser-derived elevations of easily-identifiable features in the caldera confirm the horizontal accuracy of the measurement is within the diameter of the laser footprint, and vertical accuracy is within the error inherent in the measurement. Crossover analysis shows that the standard error of the means at track intersection points within the caldera and dome (i.e., where zero and close to the maximum amount of uplift is expected) are about 1 cm, indicating elevation change at the 3 cm/year level should be detectable. We demonstrate one of the powerful advantages of scanning laser altimetry over other remote sensing techniques; the straightforward creation of precise digital elevation maps of overflown terrain. Initial comparison of the 1993-1995 data indicates uplift occurred, but filtering is required to remove vegetation effects. Although research continues to utilize the full potential of laser altimetry data, the results constitute a successful demonstration that the technique may be used to perform geodetic monitoring of surface topographic change.

Hofton, M. A.↗

UAV Trajectory Modeling Using Neural Networks

Massive small unmanned aerial vehicles are envisioned to operate in the near future. While there are lots of research problems need to be addressed before dense operations can happen, trajectory modeling remains as one of the keys to understand and develop policies, regulations, and requirements for safe and efficient unmanned aerial vehicle operations. The fidelity requirement of a small unmanned vehicle trajectory model is high because these vehicles are sensitive to winds due to their small size and low operational altitude. Both vehicle control systems and dynamic models are needed for trajectory modeling, which makes the modeling a great challenge, especially considering the fact that manufactures are not willing to share their control systems. This work proposed to use a neural network approach for modelling small unmanned vehicle's trajectory without knowing its control system and bypassing exhaustive efforts for aerodynamic parameter identification. As a proof of concept, instead of collecting data from flight tests, this work used the trajectory data generated by a mathematical vehicle model for training and testing the neural network. The results showed great promise because the trained neural network can predict 4D trajectories accurately, and prediction errors were less than 2:0 meters in both temporal and spatial dimensions.

Neural Networks↗

Future of Fuel Savings

Using automation to free up controllers for more strategic management of air traffic is one approach being studied by NASA as it seeks to boost airspace system capacity and efficiency, thereby saving fuel. Heinz Erzberger, a NASA Ames Research Center senior scientist, says the Advanced Airspace Concept (AAC) has been studied for several years. It could increase efficiency 15% by providing optimal routes that cut airlines direct operating costs. A 25% increase in landings on existing runways could follow an important benefit. AAC is one of the efforts to be reviewed by the Joint Planning and Development Organization, an FAA-led initiative by six federal agencies to redesign the U.S. air transportation system by 2025. The main goal is to triple air traffic capacity within 20 years to avert the sort of gridlock that would make fuel consumption only one of many travel nightmares. The automated system approach would allow aircraft to fly optimal trajectories. A trajectory would be defined in the standard three dimensions and eventually include the fourth, time. The management of air traffic by the data-linked exchange of trajectories would start at high altitude and eventually move down to lower altitudes. The automated concept is an outgrowth of the type of tools developed by NASA for use by FAA controllers in managing traffic flows over the years, including ones that optimize routings for the best fuel burn. But AAC would push automation further to reduce workload so controllers can focus on "solving strategic control problems, managing traffic flow during changing weather and ... other unusal events." One key component, the automated trajectory server (ATS), is a ground systems that would rely on software to manage flight path requests from aircrews and controllers. But, Erzberger acknowledges, "The FAA's current plan for upgrades to air traffic services does not include [allowing] the future ground system to issue separation-critical clearances of trajectory changes autonomously to aircraft via data link without explicit approval of a controller," as the AAC proposes. The AAC enables pilots or controllers to data link requests for a trajectory change to the ATS for approval after they are deconflicted with the paths of other aircraft. To divert around storms, for example, pilots could data link their trajectory preference to the ATS. Since several aircraft might request similar routes, the computer would then have to suggest alternatives. This could be accomplished without pilot-controller radio calls, a big bottleneck now. The ATS would have a built-in conflict monitor to call for a resolution (turn, climb or descend), when loss of separation is likely in 1-20 min. The AAC system would reduce controller errors by 90%, according to NASA Ames estimates. The AAC would have a back-up program to assure separation-Tactical Separation Assurance (TSAFE). It s designed to detect short-term traffic conflicts within 3-4 min. of loss of separation. The last line of defense would still be provided by traffic alert & collision avoidance systems (TCAS).

Hughes, David↗

Using Recorded Airspace Traffic Data to Create Simulation Scenarios for Trajectory-Based Operations

The National Aeronautics and Space Administration is supporting research to transition from the current air traffic management paradigm to Trajectory-Based Operations targeting the 2035-2045 timeframe. Trajectory-Based Operations in the National Airspace System focuses on modernizing current operations and technology to increase efficiency, predictability, resilience, and flexibility while migrating toward greater operational autonomy across the airspace. To understand the impact of new technologies and procedures that enable Trajectory-Based Operations, simulation studies must be conducted using realistic scenarios. This paper describes techniques that can be employed when using recorded airspace traffic data to create scenarios representative of a 2040 Trajectory-Based Operations airspace. The paper provides a use case example and suggests how this methodology may be applied to other simulations studying concepts, technologies, and procedures in a future airspace system.

Billy K. Buck↗

Comet Halley neutral gas density profile along the Vega 1 trajectory measured by NGE

Data from the Vega 1 permitted the determination of the total neutral gas density profile along the spacecraft trajectory. Discounting small fluctuations, the field ionization source instrument measured a density profile which varied approximately as the inverse radial distance squared. Data from the electron impact ionization instrument yielded a series of calibration points; e.g., the neutral density at 100,000 km is 10,000/cc. The combined data provide a calibrated total density profile, and imply a neutral production rate of 10 to the 30th power molecules/sec.

Curtis, C. C.↗