Search NASA⌕ Search

SEARCH · Search NASA

Results for “trajectory tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

A comparison of frequency estimation techniques for high-dynamic trajectories

A comparison is presented for four different estimation techniques applied to the problem of continuously estimating the parameters of a sinusoidal Global Positioning System (GPS) signal, observed in the presence of additive noise, under extremely high-dynamic conditions. Frequency estimates are emphasized, although phase and/or frequency rate are also estimated by some of the algorithms. These parameters are related to the velocity, position, and acceleration of the maneuvering transmitter. Estimated performance at low carrier-to-noise ratios and high dynamics is investigated for the purpose of determining the useful operating range of an approximate Maximum Likelihood (ML) estimator, an Extended Kalman Filter (EKF), a Cross-Product Automatic Frequency Control (CPAFC) loop, and a digital phase-locked loop (PPL). Numerical simulations are used to evaluate performance while tracking a common trajectory exhibiting high dynamics.

Vilnrotter, V. A.↗
NASA NTRS1989

A real-time guidance algorithm for aerospace plane optimal ascent to low earth orbit

Problems of onboard trajectory optimization and synthesis of suitable guidance laws for ascent to low Earth orbit of an air-breathing, single-stage-to-orbit vehicle are addressed. A multimode propulsion system is assumed which incorporates turbojet, ramjet, Scramjet, and rocket engines. An algorithm for generating fuel-optimal climb profiles is presented. This algorithm results from the application of the minimum principle to a low-order dynamic model that includes angle-of-attack effects and the normal component of thrust. Maximum dynamic pressure and maximum aerodynamic heating rate constraints are considered. Switching conditions are derived which, under appropriate assumptions, govern optimal transition from one propulsion mode to another. A nonlinear transformation technique is employed to derived a feedback controller for tracking the computed trajectory. Numerical results illustrate the nature of the resulting fuel-optimal climb paths.

Calise, A. J.↗
NASA NTRS1987

A combined stochastic feedforward and feedback control design methodology with application to autoland design

A combined stochastic feedforward and feedback control design methodology was developed. The objective of the feedforward control law is to track the commanded trajectory, whereas the feedback control law tries to maintain the plant state near the desired trajectory in the presence of disturbances and uncertainties about the plant. The feedforward control law design is formulated as a stochastic optimization problem and is embedded into the stochastic output feedback problem where the plant contains unstable and uncontrollable modes. An algorithm to compute the optimal feedforward is developed. In this approach, the use of error integral feedback, dynamic compensation, control rate command structures are an integral part of the methodology. An incremental implementation is recommended. Results on the eigenvalues of the implemented versus designed control laws are presented. The stochastic feedforward/feedback control methodology is used to design a digital automatic landing system for the ATOPS Research Vehicle, a Boeing 737-100 aircraft. The system control modes include localizer and glideslope capture and track, and flare to touchdown. Results of a detailed nonlinear simulation of the digital control laws, actuator systems, and aircraft aerodynamics are presented.

Halyo, Nesim↗
DOE OSTI2021

Reservoir Computing as a Tool for Climate Predictability Studies

Reduced-order dynamical models play a central role in developing our understanding of predictability of climate irrespective of whether we are dealing with the actual climate system or surrogate climate models. In this context, the linear inverse modeling (LIM) approach, by capturing a few essential interactions between dynamical components of the full system, has proven valuable in providing insights into predictability of the full system. We demonstrate that reservoir computing (RC), a form of learning suitable for systems with chaotic dynamics, provides an alternative nonlinear approach that improves on the predictive skill of the LIM approach. We do this in the example setting of predicting sea surface temperature in the North Atlantic in the preindustrial control simulation of a popular earth system model, the Community Earth System Model so that we can compare the performance of the new RC-based approach with the traditional LIM approach both when learning data are plentiful and when such data are more limited. The improved predictive skill of the RC approach over a wide range of conditions—larger number of retained EOF coefficients, extending well into the limited data regime, etc.—suggests that this machine-learning technique may have a use in climate predictability studies. While the possibility of developing a climate emulator—the ability to continue the evolution of the system on the attractor long after failing to be able to track the reference trajectory—is demonstrated in the Lorenz-63 system, it is suggested that further development of the RC approach may permit such uses of the new approach in more realistic predictability studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

HIPED: Machine learning framework for spherical tokamak pedestal prediction and optimization

We introduce a Machine Learning framework, HIPED (HeIght and width Predictor for Edge Dynamics), for predicting and optimizing pedestal and core performance in spherical tokamak plasmas. Trained on pedestal and core datasets from the third MAST-U campaign, HIPED provides accurate estimates of pedestal height and width. The results reveal notable differences compared with conventional aspect-ratio studies; for instance, a simple power-law relation between pedestal width and height has very low accuracy. Instead, additional parameters such as normalized plasma pressure, elongation, and Greenwald fraction significantly improve accuracy. HIPED can also be trained only on `control room parameters' to inform experimentalists of which controllable parameters to adjust for improving core-integrated performance. The framework further includes a multi-objective optimization scheme that helps guide experimental planning and optimization. We find Pareto-optimal discharges with respect to various features, including distance from edge-localized modes and normalized plasma pressure, track their parameter trajectories over time, and identify the control room parameters required for these Pareto-optimal discharges. This provides a framework for systematically optimizing core and edge performance according to different experimental priorities.

Parisi, Jason F. [Princeton Plasma Physics Laborat↗
NASA NTRS1978

RF coverage analysis and performance for Shuttle communication links

This paper describes the current work at NASA/Johnson Space Center in the area of RF coverage analysis and performance-assessment for the Space Shuttle Program communication and tracking radio links. Trajectories, antenna data, ground station and Shuttle hardware performance characteristics and RF link math models were assimilated to generate RF link performance predictions for the three basic mission phases - ascent, on-orbit, and descent. Results identify some earlier deficiencies that required re-configuration of the ground station. Overall performance is currently satisfactory.

Loh, Y.-C.↗
NASA NTRS1979

Encounter with Venus - An update

This report deals with early results from the Pioneer Venus Orbiter and multiprobe missions, which encountered Venus on December 4 and December 9, 1978, respectively. Initial results for the multiprobe mission and for the first 30 days of the Orbiter mission have already been reported. Additional mission features and updated mission parameters based on refined tracking data and trajectory computations are presented here. Scientific results for both missions are discussed which cover the first 130 days (or orbits) of the nominal 243-day Orbiter mission.

Colin, L.↗
NASA NTRS1983

Design and flight testing of a digital landing approach autopilot

An important feature in General Aviation (GA) autopilots is the ability to intercept and hold the glideslope and localizer during a landing approach. Most General Aviation landing approach autopilots available today use analog systems. This paper presents the designs of digital landing approach autopilots for a General Aviation (NAVION) aircraft using modern linear quadratic control theory. Each constant gain, direct digitally designed autopilot operates synchronously at a slow rate (10 samples per second) and has modest memory requirements, i.e., a full state Kalman filter is not used. The autopilot is designed to track desired position trajectories constructed in an ILS or MLS terminal area using command generators. Alternative command errors for intercepting and holding the localizer beam centerline are investigated. Linear simulations and flight test results are presented demonstrating the successful application of the linear quadratic regulator approach.

Broussard, J. R.↗
NASA NTRS1988

Decentralized adaptive control of robot manipulators with robust stabilization design

Due to geometric nonlinearities and complex dynamics, a decentralized technique for adaptive control for multilink robot arms is attractive. Lyapunov-function theory for stability analysis provides an approach to robust stabilization. Each joint of the arm is treated as a component subsystem. The adaptive controller is made locally stable with servo signals including proportional and integral gains. This results in the bound on the dynamical interactions with other subsystems. A nonlinear controller which stabilizes the system with uniform boundedness is used to improve the robustness properties of the overall system. As a result, the robot tracks the reference trajectories with convergence. This strategy makes computation simple and therefore facilitates real-time implementation.

Yuan, Bau-San↗
NASA NTRS1989

Design of an adaptive controller for a telerobot manipulator

The design of a joint-space adaptive control scheme is presented for controlling the slave arm motion of a dual-arm telerobot system developed at Goddard Space Flight Center (GSFC) to study telerobotic operations in space. Each slave arm of the dual-arm system is a kinematically redundant manipulator with 7 degrees of freedom (DOF). Using the concept of model reference adaptive control (MRAC) and Lyapunov direct method, an adatation algorithm is derived which adjusts the PD controller gains of the control scheme. The development of the adaptive control scheme assumes that the slave arm motion is non-compliant and slowly-varying. The implementation of the derived control scheme does not need the computation of the manipulator dynamics, which makes the control scheme sufficiently fast for real-time applications. Computer simulation study performed for the 7-DOF slave arm shows that the developed control scheme can efficiently adapt to sudden change in payloads while tracking various test trajectories such as ramp or sinusoids with negligible position errors.

Nguyen, Charles C.↗
NASA NTRS1988

Model based trajectory planning using preview

The control of manipulators is seen here as a two-level process. A method is described to convert information available at the programming level into trajectories suitable to be tracked by a servo control system. The goal of the servo is to absorb the unmodeled dynamics. Tracking accuracy will depend mainly on the acceleration demand of the nominal trajectory setpoint, in particular, the actuator output demand must remain bounded. Our scheme adaptively takes into consideration at the trajectory computation level the dynamics of the underlying system, dynamically available information acquired through sensors, various types of constraints, such as path accuracy, and manipulator optimization. This scheme is meant to be implemented on-line, to drive mechanical systems such as manipulators. It is developed in the context of a multi-manipulator programming and control environment for space applications developed as part of a collaborative effort between McGill University and the Jet Propulsion Laboratory.

Hayward, Vincent↗
NASA NTRS1989

Obstacle avoidance for redundant robots using configuration control

The article presents a new and simple solution to the obstacle avoidance problem for redundant robots. In the proposed approach, called configuraiton control, the redundancy is utilized to configure the robot so as to satisfy a set of kinematic inequality constraints representing obstacle avoidance, while the end-effector is tracking a desired trajectory. The robot control scheme is very simple, and uses on-line adaptation to eliminate the need for the complex dynamic model and parameter values of the robot. Several simulation results for a four-link planar robot are presented to illustrate the versatility of the approach. These include reaching around a stationary obstacle, simultaneous avoidance of two obstacles, robot reconfiguration to avoid a moving obstacle, and avoidance of rectangular obstacles.

Colbaugh, R.↗
NASA NTRS1989

Nonlinear control via approximate input-output linearization - The ball and beam example

This paper presents an approach for the approximate input-output linearization of nonlinear systems, particularly those for which relative degree is not well defined. It is shown that there is a great deal of freedom in the selection of an approximation and that, by designing a tracking controller based on the approximating system, tracking of reasonable trajectories can be achieved with small error. The approximating system is itself a nonlinear system, with the difference that it is input-output linearizable by state feedback. Some properties of the accuracy of the approximation are demonstrated and, in the context of the ball and beam example, it is shown to be far superior to the Jacobian approximation. The results are focused on finding regular SISO systems which are close to systems which are not regular and controlling these approximate regular systems.

Hauser, John↗
NASA NTRS1991

Control of a flexible bracing manipulator: Integration of current research work to realize the bracing manipulator

All research results about flexible manipulator control were integrated to show a control scenario of a bracing manipulator. First, dynamic analysis of a flexible manipulator was done for modeling. Second, from the dynamic model, the inverse dynamic equation was derived, and the time domain inverse dynamic method was proposed for the calculation of the feedforward torque and the desired flexible coordinate trajectories. Third, a tracking controller was designed by combining the inverse dynamic feedforward control with the joint feedback control. The control scheme was applied to the tip position control of a single link flexible manipulator for zero and non-zero initial condition cases. Finally, the contact control scheme was added to the position tracking control. A control scenario of a bracing manipulator is provided and evaluated through simulation and experiment on a single link flexible manipulator.

Kwon, Dong-Soo↗
NASA NTRS1992

Galileo orbit determination for the Venus and Earth-1 flybys

This paper presents the orbit determination strategy and results in navigating the Galileo spacecraft from launch through its Venus and first earth flybys. Many nongravitational effects were estimated, including solar radiation pressure, small velocity impulses from attitude changes and eight trajectory correction maneuvers. Tracking data consisted of S-Band Doppler and range. The fitting of Doppler was difficult since one of the cpacecraft's two antennas was offset from the spin axis, thus producing the sinusoidal velocity fluctuation seen in the data. Finally, Delta Differential One-way Range data was used during the last three months of the earth approach to help deliver the spacecraft to within desired accuracy.

Kallemeyn, P. H.↗