Search NASA⌕ Search

SEARCH · Search NASA

Results for “water security”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Water-Weakening and Time-Dependent Deformation of Organic-Rich Chalks

Abstract The Ghareb Formation is a shallowly buried porous chalk in southern Israel that is being considered as a host rock for a geologic nuclear waste repository. Setup and operation of a repository will induce significant mechanical, hydrological and chemical perturbations in the Ghareb. Developing a secure repository requires careful characterization of the rock behavior to different loads. To characterize hydromechanical behavior of the Ghareb, several short- and long-term deformation experiments were conducted. Hydrostatic loading tests were conducted both dry and water-saturated, using different setups to measure elastic properties, time-dependent behavior, and permeability. A set of triaxial tests were conducted to measure the elastic properties and rock strength under differential loading at dry and water-saturated conditions. The hydrostatic tests showed the Ghareb began to deform inelastically around 12–15 MPa, a relatively low effective pressure. Long-term permeability measurements demonstrated that permeability declined with increasing effective pressure and was permanently reduced by ~ 1 order of magnitude after unloading pressure. Triaxial tests showed that water saturation significantly degrades the rock properties of the Ghareb, indicating water-weakening is a significant risk during repository operation. Time-dependent deformation is observed during hold periods of both the hydrostatic and triaxial tests, with deformation being primarily visco-plastic. The rate of deformation and permeability loss is strongly controlled by the effective pressure as well. Additionally, during holds of both hydrostatic and triaxial tests, it is observed that when water-saturated, radial strain surpassed axial strain when above effective pressures of 13–20 MPa. Thus, deformation anisotropy may occur in situ during operations even if the stress conditions are hydrostatic when above this pressure range.

58 GEOSCIENCES↗
DOE OSTI2020

Energy Master Planning for Resilient Public Communities—Best Practices from U.S. Military Installations

Until recently, most planners at military installations addressed energy systems for new facilities on an individual facility basis without consideration of community-wide goals relevant to energy sources, renewables, storage, or future energy generation needs. Building retrofits of public buildings typically do not address energy needs beyond the minimum code requirements making it difficult, if not impossible, to achieve community-level targets on a building-by-building basis. Planning on the basis of cost and general reliability may also fail to deliver community-level resilience. For example, many building code requirements focus on hardening to specific threats, but in a multi-building community, only a few of these buildings may be mission-critical. Over the past two decades, the frequency and duration of regional power outages and water utility disruptions from weather, man-made events, and aging infrastructure have increased. Major disruptions of electric and thermal energy have degraded critical mission capabilities and caused significant economic impacts. In 2016, the U.S. Department of Defense issued guidance that each Service (Army, Navy, Air Force, Marines) complete comprehensive energy plans for the installations that consumed 75% of total building energy. Guidance was updated in 2017 to include metrics for energy resilience, and in some cases, water. This paper describes how community level quantitative and qualitative resilience analysis and metrics have been incorporated into community energy and water planning best practices for military installations in three geographically diverse locations. It is based on research performed under the International Energy Agency’s “Energy in Buildings and Communities Program Annex 73,” focusing on development of guidelines and tools that support the planning of Net Zero Energy Resilient Public Communities as well as research performed under the Department of Defense Environmental Security Technology Certification Program project EW18-D1- 5281, “Technologies Integration to Achieve Resilient, Low- Energy Military Installations.” The first case study reviews progress made on an energy and water planning study conducted at Fort Bliss, Texas. The second and third describes planning conducted at Fort Bragg, North Carolina and the Joint Region Marianas, Guam, respectively, under the updated guidance from 2017 regarding energy and water resilience. Analysis methods, key metrics, and key infrastructure and operational constraints are described, as well as technical, economic and business concepts used during the planning process.

Urban, Angela B.↗
DOE OSTI2025

Advanced Reactor Designs Security Analysis, Risk, and Recommendations: Risks, Consequences, and Possible by-Design Mitigation Approaches Associated with Select Advanced Reactors

Next-generation advanced reactors (ARs) incorporate enhanced safety systems, have smaller source terms, and feature compact modular designs, which should lessen their collective risk profiles. However, to fully evaluate risk, security needs to be a part of the equation. Without taking security into consideration, safety systems and components in the new ARs may be vulnerable to sabotage. These base attributes, coupled with enhanced security features specific to AR design through sound engineering and security-by-design (SeBD), should provide developers and operators with lower inherent security risk profiles. Building security early into the AR design may remove or passively secure potential critical targets from an adversary’s reach , thereby increasing overall safety and security. An integrated approach and diverse design team that includes engineering, operations, and security experts are fundamental to building security into the design without sacrificing fundamental operational efficiencies and principles. The objective of this project was to evaluate the security and safety interfaces for five classes of reactors, identify potential security vulnerabilities of structures, systems, and components (SSC), and underscore the need to consider security alongside safety in the design o f these concepts. The five reactor classes evaluated in this project and presented in this report are molten-salt reactors (MSR), high temperature gas reactors (HTGR), sodium-fast reactors (SFR), advanced light-water reactors (ALWR), and microreactors. These designs were selected because they reflect the concepts that are closest to market deployment and have received significant resource investments from the public and private sector. This project assesses the inherent security risks posed by common classes of ARs, provides a methodology and framework to assess security along with safety, and offers an analysis of potential mitigation strategies that could be incorporated. For each AR technology, the SSCs that relate to radionuclide source safety functions are discussed to understand the SSC contribution to safety and relative importance in the protective strategy for the design. The assumptions that went into evaluating each reactor concept originated from generic publicly available nonproprietary information and should not directly be used to qualify an absolute risk profile nor to rank specific AR designs. Instead, the purpose of the analysis is to understand and compare the generic inherent security risks of different AR technologies.

98 - NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL↗
DOE OSTI2020

Mosquito Distribution and West Nile Virus Surveillance Results on the Nevada National Security Site in South Central Nevada

A 10-year study (2004-2013) was conducted to determine mosquito distribution and the prevalence of West Nile Virus (WNV) on the Nevada National Security Site (NNSS) in south central Nevada. Mosquito traps baited with dry ice were set overnight at sites where standing water provided potential breeding sites for mosquitoes. Captured mosquitoes were identified to species and tested for WNV. A total of 556 mosquitoes representing 6 species were captured and identified at 20 sites around the NNSS during 124 surveys. A vast majority (89%) of mosquitoes were Culex tarsalis. None of the mosquitoes tested were positive for WNV although 2 samples, both Culiseta inornata, were suspect for WNV in 2005 and 2006, both from Well 3 Pond. Additionally, 24 birds representing 5 species were opportunistically collected and tested for WNV with no positive results. Results from this study reveal patterns of mosquito distribution across the NNSS and suggest that NNSS workers have a very low risk of being exposed to WNV.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Biomining Critical Elements and Metals

The US government has identified 17 critical elements, including most rare earth elements (REEs), and metals, which are used extensively in consumer electronics as well as military and national security hardware. We are developing techniques for biomining these elements, the process of using microorganisms to extract critical elements from water, ores, and mine waste to fill these needs. Bioextraction is focusing on: 1) building on our first-year successes of identifying microbes that generate exudates that enhance the extraction of multivalent cations, 2) evaluating available phosphate solubilizing microbes to dissolve apatite and monazite, and 3) and biosurfactant producing microbes. Bioaccumulation efforts involves testing microbes that: 1) naturally release complex exudates that contain organic chelating agents, and 2) naturally accumulate or hyperaccumulate (wt-% levels) metals. Results from year one includes proof of concept that biosurfactant producing microorganisms can release REEs from select ores and that release of REEs is increased by the addition of glucose. Molecular results for microorganism profiling proved a population shift after addition of microorganisms. The study will culminate in a proof-of-concept demonstration, manuscripts, and the data needed for scaledup biomining of REEs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Digital-Threat Bias and Psychological Distance: Barriers to Foundational Digital-Security Improvement

Modern life is held together by a web of digital dependencies that enable and provide delivery of critical services and functions—think the provision of utilities such as electricity and water, as well as our dependency on digital services for social and economic services (internet, communication, etc.). As this dependency grows, the complexity related to the delivery of these critical services increases as well. As complexity increases, the understanding of the risk and impact associated with potential disruption, degradation, or destruction—due to either malicious or non-malicious events of those digitally enabled functions—decreases. One potential explanation for the difficulty to 1) understand the risks faced and 2) address them appropriately and effectively is the abstractness and psychological distance assigned to “digital threat.” The complexity of these digitally enabled services creates a perceived complicatedness; as a result, digital threats are treated differently than similarly devasting (but more easily understood) kinetic or physical threats. How we categorize these threats also matters. Acts of cyber-enabled sabotage to critical infrastructure need to be defined as irregular warfare. By inadequately defining the threat, we compound the problem. Acknowledging this digital-threat bias is foundational to improving the ability to protect critical infrastructure. Using construal-level theory and psychological-distance concepts provides an intriguing starting point to address these issues, to reframe the challenges faced, and pursue more effective critical infrastructure security and defense policy.

29 - ENERGY PLANNING, POLICY AND ECONOMY↗
DOE OSTI2023

AI-ENABLED MONITORING OPTIONS TOWARDS SECURE MICROREACTOR DEPLOYMENT AND OPERATIONS

Global nuclear energy deployment scenarios suggest favorable economics for smaller, more versatile, and self-contained reactor technologies. Recognizing their key features as integrated, autonomous and either semi-remotely operated or fully remotely operated systems, microreactors are expected to be deployed in large numbers servicing off/micro-grids, many in geographically remote locations. Integrated nature of these systems as well as ease of their transportation as complete units, simplified installation and relocation/decommissioning challenge traditional continuity-of-knowledge practices used for conventional light water reactors where refueling is done onsite at designated times only replacing portions of their cores and only after their full commissioning for operations including completion of their containment building with security and safeguards measures in place. This effort is exploring AI (artificial intelligence)-enabled monitoring options that would be design agnostic and would assure secure unit deployment and operations. The principle is to maintain situational awareness via real-time evaluations of simultaneous and remotely transmitted monitoring data capturing key safeguards attributes including such characteristics as temperature, radiation, vibrational signals (inter alia), and others. The key principle is to provide reliable and resilient security options while maintaining simplified and economical deployment. The paper will review feasible options for AI-enabled solutions for such evaluations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Fully Homomorphic Encryption

This code implements a Fully Homomorphic Encryption (FHE) system, enabling secure computation on encrypted data without requiring decryption. It supports encryption, decryption, and homomorphic operations like matrix multiplication and addition. This code is adaptable for integrating FHE into linear-time invariant (LTI) systems, including digital control and filtering. With proper configuration from subject matter expertise, encrypted system parameters and signals can be manipulated to perform tasks like state updates, output calculations, and convolution in the encrypted domain. By preserving the structure of LTI systems while ensuring privacy, the framework facilitates secure applications in areas such as autonomous systems, signal processing, and industrial automation. The code initializes the encryption system using parameters provided in the env dictionary. These parameters include the ciphertext modulus, key dimension, plaintext fixed-point scaling factor, and noise bound. During initialization, a secret key is generated, which is essential for encrypting and decrypting data securely. The modular design allows users to tailor these parameters to specific use cases or security requirements. The code implements multiple cryptographic schemes. The learning with errors (LWE) encryption method encodes cleartext message to their plaintext fixed-point representation then encrypted into ciphertext space with additive noise. This noise ensures the security of the scheme, relying on the computational hardness of the LWE problem. The code also includes the Gentry-Sahai-Waters (GSW) scheme based off the LWE problem. Homomorphic matrix multiplication is performed between the LWE and GSW to encrypted data. This is achieved using a decomposition function on the LWE ciphertext during the multiplication operation. For higher-dimensional data, the code includes a method to encrypt entire matrices (GSWMat) using GSW encryption. These encrypted matrices can then be used for homomorphic matrix multiplications (MatMult). The decryption function uses the secret key to recover the original plaintext, removing the added noise and scaling that was originally applied during encryption.

Lois, Roberts [Idaho National Laboratory (INL), Id↗
DOE OSTI2021

FY21 NREL Wind Energy Accomplishments and Mid Year Performance Report

This report takes stock of the research NREL conducted on behalf of DOE’s Wind Energy Technologies Office (WETO), other funding and research partners, and the people of the United States during the first half of FY21 (between Oct. 1, 2020 and March 30, 2021). While diverse, all of these efforts shared a common goal to accelerate the deployment of wind energy technologies by helping to improve wind power performance, lower costs, and reduce market barriers to create a more sustainable, secure, and resilient power grid and a cleaner energy future.

49 EE - Wind and Water Power Program - Wind (EE-4W↗
DOE OSTI2022

Strengthening the Security of Operational Technology: Understanding Contemporary Bill of Materials

The evolution of cyber-physical infrastructure has made its security more challenging. The last few years have witnessed a convergence of hardware and software segments in various domains, including operational technology (OT) which is responsible for carrying out critical tasks such as monitoring and controlling power grids, nuclear plants, transportation, and emergency services. Both hardware and software encapsulate numerous open source and proprietary subcomponents, making it crucial for end-users to understand the composition of the products they are using. For example, wind turbines incorporate thousands of lines of code (software) used for the turbine's design, planning, operation, and analytics in addition to the numerous hardware subcomponents that construct it. Due to the highly complex nature of software and hardware, knowledge of the components and subcomponents is required to mitigate cyber vulnerabilities and defend against cyberattacks. There has also been a transformation from a traditional linear supply chain into a global, dynamic, diverse, and interconnected system. The digitization of the supply chain makes it easier to find and exploit vulnerabilities. Critical infrastructures (e.g., power grids, oil, natural gas, water, and wastewater) rely on OT to function, and if the OT is compromised, equipment damage and potential interruption of services could result. A significant security measure to protect OT systems from disruption is to develop a supply chain bill of materials (BoM) corresponding to the software and hardware used in OT, along with attestations amongst vendors and asset owners. A supply chain BoM is a proactive way to understand the inherent vulnerabilities in the system and mitigate them in advance of being exploited. BoMs bolster the trust placed in the digital infrastructure and enhance software supply chain security by sustaining the management of component obsolescence and compliance, along with the seclusion of unsafe segments of a specific product. Adopting BoM tools is becoming increasingly important across various government sectors, as evidenced by the recent U.S. executive order on cybersecurity (NIST 2021). This paper aims to classify BoMs based on structure, functionality, component type, and architecture. The work also discusses case studies to further highlight the benefits of BoMs. In addition, it identifies missing pieces in existing BoM implementations so that future research may identify bounds on where it could expect to make improvements and directly enable researchers to identify promising areas for exploration. Further, the authors provide valuable recommendations to tool developers, researchers, and standardizing organizations (policymakers), additionally benefitting critical infrastructure owners and government executives. This aids in paving a path for future work, thereby, providing suggestions to determine a tool for consumers that best suit their needs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

FY24 LWRS Program overview

This slide deck provides a brief overview of the Light Water Reactor Sustainability (LWRS) Program. It will be used during public presentations. The LWRS Program aims to enhance the safe, efficient, and economical performance of our nation's nuclear fleet and extend the operating lifetimes of this reliable source of electricity.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

LWRS 2019 Accomplishments Report

Nuclear energy is an important part of supplying our nation’s energy—safely, dependably, and economically—with reduced carbon dioxide emissions. The United States (U.S.) Department of Energy-Office of Nuclear Energy (DOE-NE) supports a strong and viable domestic nuclear industry. In collaboration with industry programs, the Light Water Reactor Sustainability (LWRS) Program supports the continued operation of the commercial fleet of nuclear power plants. DOE’s role in this program focuses on enhancing the safe, efficient, and economical performance of the nation’s nuclear fleet. This report describes the accomplishments of the LWRS Program during Fiscal Year 2019. DOE-NE’s0F primary mission is to advance nuclear power as a resource capable of making major contributions in meeting the nation’s energy supply, environmental, and energy security needs. Under the guidance of three research objectives, NE resolves barriers to technical, cost, safety, security, and proliferation resistance through early stage research, development, and demonstration (RD&D) to: • Enhance the long-term viability and competitiveness of the existing U.S. reactor fleet • Develop an advanced reactor pipeline • Implement and maintain national strategic fuel-cycle and supply-chain infrastructures.

42 ENGINEERING↗
DOE OSTI2024

Leveraging State Clean Water Revolving Funds to Expand Clean Energy Financing

To meet clean energy goals, states will need significant capital. Federal funding from the Inflation Reduction Act and the Infrastructure Investment and Jobs Act will help, including by capitalizing clean energy state revolving loan funds (RLFs). States can leverage state clean water revolving funds to finance even more clean energy improvements. New York and Pennsylvania have used this innovative mechanism to extend the impact of their clean energy loan programs. For states looking to extend the reach of their clean energy financing programs, the brief: -Explains how each state leveraged their state revolving funds, -Identifies critical success factors for doing so, and -Offers key elements for replicating this model In New York, New York State Energy Research and Development Authority structured a sale of bonds secured by the repayments from a portfolio of residential energy efficiency loans from its Green Jobs – Green New York Program, with the additional support of a guarantee from the state’s clean water revolving fund. The Pennsylvania Treasury Department received a direct investment of funds from Pennsylvania’s clean water revolving fund to support the relaunch of the Keystone Home Energy Loan Program (HELP), which had previously been shuttered due to lack of support funding. From our review of these two case studies, when facilitating state clean water revolving fund transactions to support clean energy lending, the following critical success factors emerged: -Reference to preventing atmospheric deposition resulting from the combustion of fossil fuels in the state’s Clean Water Act Section 319 Nonpoint Source Pollution Management Plan, which sets out that state’s strategy for reducing pollution into state waterways. -Strong relationships and trust between the clean water revolving fund administrator and the state agency administering the clean energy loan program. -Limited funding exposure for the clean water revolving funds—which are generally large and well capitalized—to ensure that any losses experienced by clean water revolving funds would have a negligible impact on the fund’s ability to support core water and wastewater projects. -Willingness, on the part of the clean water revolving fund administrator, to innovate and engage in careful analysis to support transaction structuring, and support from state energy partner organizations. The brief provides case studies of these states’ experiences, critical success factors, and key elements for replicating the model.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Storm Water Pollution Prevention Plan Middle DP Road Recovery Effort, June 26, 2020

The United States Environmental Protection Agency (EPA) has issued a final 2017 Construction General Permit (CGP) that covers discharges of stormwater from construction sites. The 2017 National Pollutant Discharge Elimination System (NPDES) General Permit for Storm Water Discharges from Construction Activity (Appendix D) includes the following requirements:(1) conduct a critical habitat and threatened/endangered species study; (2) develop and implement a Storm Water Pollution Prevention Plan (SWPPP) in accordance with good engineering practices; (3) submit a Notice of Intent (NOI); (4) install and maintain erosion and stormwater controls; (5) perform and document storm water inspections during construction and site stabilization; (6) amend the SWPPP as necessary; and (7) submit a Notice of Termination (NOT) following project completion and final stabilization of disturbed areas. Authorization to discharge storm water is required under this Permit for both large and small construction projects disturbing more than one (1) acre or part of a larger common plan of development that collectively disturbs more than one (1) acre. All parties that meet the definition of Operator must be permitted. Each permittee is not required to develop and implement a separate SWPP Plan. It is required that there be at least one SWPP Plan for a site that incorporates the required elements for all Operators. The 2017 CGP number for New Mexico (Region 6) is NMR100000. This Plan, which has been developed for Triad National Security, LLC (Triad), describes the nature and sequencing of construction activities, potential sources of pollution, and identifies the Best Management Practices (BMPs) to minimize the potential for erosion and storm water pollution. The Plan was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. § §1251 et seq., as amended by the Water Quality Act of 1987, P.L. 100-4), and the regulations established by the U.S. Environmental Protection Agency (EPA) for National Pollutant Discharge Elimination System (NPDES) General Permits for Storm Water Discharges From Construction Activities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Storm Water Pollution Prevention Plan Middle DP Road Recovery Effort, June 26, 2020 (Copy for Informational Puproses Only)

The United States Environmental Protection Agency (EPA) has issued a final 2017 Construction General Permit (CGP) that covers discharges of stormwater from construction sites. The 2017 National Pollutant Discharge Elimination System (NPDES) General Permit for Storm Water Discharges from Construction Activity (Appendix D) includes the following requirements: (1) conduct a critical habitat and threatened/endangered species study; (2) develop and implement a Storm Water Pollution Prevention Plan (SWPPP) in accordance with good engineering practices; (3) submit a Notice of Intent (NOI); (4) install and maintain erosion and stormwater controls; (5) perform and document storm water inspections during construction and site stabilization; (6) amend the SWPPP as necessary; and (7) submit a Notice of Termination (NOT) following project completion and final stabilization of disturbed areas. Authorization to discharge storm water is required under this Permit for both large and small construction projects disturbing more than one (1) acre or part of a larger common plan of development that collectively disturbs more than one (1) acre. All parties that meet the definition of Operator must be permitted. Each permittee is not required to develop and implement a separate SWPP Plan. It is required that there be at least one SWPP Plan for a site that incorporates the required elements for all Operators. The 2017 CGP number for New Mexico (Region 6) is NMR100000. This Plan, which has been developed for Triad National Security, LLC (Triad), describes the nature and sequencing of construction activities, potential sources of pollution, and identifies the Best Management Practices (BMPs) to minimize the potential for erosion and storm water pollution. The Plan was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. § §1251 et seq., as amended by the Water Quality Act of 1987, P.L. 100-4), and the regulations established by the U.S. Environmental Protection Agency (EPA) for National Pollutant Discharge Elimination System (NPDES) General Permits for Storm Water Discharges From Construction Activities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

An Integrated Risk Assessment Process of Safety-Related Digital I&C Systems in Nuclear Power Plants

Upgrading the existing analog instrumentation and control (I&C) systems to state-of-the-art digital I&C (DI&C) systems will greatly benefit existing light water reactors. However, the issue of software common cause failure (CCF) remains an obstacle in terms of qualification for digital technologies. Existing analyses of CCFs in I&C systems mainly focus on hardware failures. With the application and upgrading of new DI&C systems, design flaws could cause software CCFs to become a potential threat to plant safety, considering that most redundancy designs use similar digital platforms or software in their operating and application systems. With complex multilayer redundancy designs to meet the single failure criterion, these I&C safety systems are of particular concern in U.S. Nuclear Regulatory Commission licensing procedures. In Fiscal Year 2019, the Risk-Informed Systems Analysis (RISA) Pathway of the U.S. Department of Energy’s Light Water Reactor Sustainability Program initiated a project to develop a risk assessment strategy for delivering a strong technical basis to support effective, licensable, and secure DI&C technologies for digital upgrades and designs. An integrated risk assessment for the DI&C process was proposed for this strategy to identify potential key digital-induced failures, implement reliability analyses of related digital safety I&C systems, and evaluate the unanalyzed sequences introduced by these failures (particularly software CCFs) at the plant level. Here this paper summarizes these RISA efforts in the risk analysis of safety-related DI&C systems at Idaho National Laboratory.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

INTEGRATED RISK ASSESSMENT OF DIGITAL I&C SAFETY SYSTEMS FOR NUCLEAR POWER PLANTS

Upgrading the existing analog instrumentation and control (I&C) systems to state-of-the-art digital I&C (DI&C) systems provides the foremost means to improve performance and reduce costs for existing light-water reactors (LWRs). However, qualification of digital technologies remains a challenge?especially the issue of software common cause failure (CCF), which has been difficult to address. Existing analyses of CCFs in I&C systems mainly focus on hardware failures. With the application and upgrading of new DI&C systems, software CCFs due to design flaws might become a potential threat to plant safety, considering that most redundancy designs use similar digital platforms or software in their operating and application systems. With complex multi-layer redundancy designs to meet the single failure criterion, these I&C safety systems are of particular concern in U.S. Nuclear Regulatory Commission (NRC) licensing procedures. In 2019, the Risk-Informed Systems Analysis (RISA) Pathway of the U.S. Department of Energy?s (DOE?s) Light Water Reactor Sustainability (LWRS) Program initiated a project to develop a risk assessment strategy for delivering a strong technical basis to support effective, licensable, secure DI&C technologies for digital upgrades/designs. An integrated risk assessment for the DI&C (RADIC) process was proposed for this strategy to identify potential key digital-induced failures, implement reliability analyses of related digital safety I&C systems, and evaluate the unanalyzed sequences introduced by these failures (particularly software CCFs) at the plant level. This paper summarizes these RISA efforts in the risk analysis of safety-related DI& systems at Idaho National Laboratory.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Enabling Floating Solar Photovoltaic (FPV) Deployment: Exploring the Operational Benefits of Floating Solar-Hydropower Hybrids

The Southeast (SE) Asia region is undergoing rapid energy sector transitions and exploring the potential role of renewables - including solar photovoltaics (PV) - as it becomes increasingly competitive as a result of technological advances and falling capital costs. Low-cost solar PV provides countries in the region with an option to meet increasing energy demand and diversify generation portfolios, complementing hydropower and thermal-dominant systems and strengthening energy security throughout the region. Floating solar PV (FPV) has emerged as an attractive application of solar PV that allows for systems to be floated on water bodies. Pairing FPV in hybrid systems with hydropower may also provide significant value for power systems in the region, beyond oft-cited co-benefits of stand-alone FPV. Despite growing interest in FPV systems, few applications of hybrid FPV-hydropower systems exist in SE Asia, and limited information is available about the co-benefits these systems may provide for potential adopters. This work, funded by the U.S. Agency for International Development (USAID) through the Advanced Energy Partnership for Asia, explores the value that hybrid FPV-hydropower systems may provide to the power systems of SE Asian countries. This work on the value of hybrid FPV-hydropower systems is accompanied by a recent report, Creating an Enabling Policy and Regulatory Environment for Floating Solar Photovoltaics: Review of Barriers to FPV Deployment in Southeast Asia, also focused on SE Asia.

14 SOLAR ENERGY↗