Search NASA⌕ Search

SEARCH · Search NASA

Results for “wave height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Estimation of the electromagnetic bias from retracked TOPEX data

We examine the electromagnetic (EM) bias by using retracked TOPEX altimeter data. In contrast to previous studies, we use a parameterization of the EM bias which does not make stringent assumptions about the form of the correction or its global behavior. We find that the most effective single parameter correction uses the altimeter-estimated wind speed but that other parameterizations, using a wave age related parameter of significant wave height, may also significantly reduce the repeat pass variance. The different corrections are compared, and their improvement of the TOPEX height variance is quantified.

Rodriguez, Ernesto↗

A new approach for determining fully empirical altimeter wind speed model functions

A statistical technique is developed for determining fully empirical model functions relating altimeter backscatter (sigma(sub 0)) measurements to near-surface neutral stability wind speed. By assuming that sigma(sub 0) varies monotonically and uniquely with wind speed, the method requires knowledge only of the separate, rather than joint distribution functions of sigma(sub 0) and wind speed. Analytic simplifications result from using a Weibull distribution to approximate the global ocean wind speed distribution; several different wind data sets are used to demonstrate the validity of the Weibull approximation. The technique has been applied to 1 year of Geosat data. Validation of the new and historical model functions using an independent buoy data set demonstrates that the present model function not only has small overall bias and root mean square (RMS) errors, but yields smaller systematic error trends with wind speed and pseudowave age than previously published models. The present analysis suggests that generally accuracte altimeter model functions can be derived without the use of colocated measurements, nor is additional significant wave height information measured by the altimeter necessary.

Freilich, M. H.↗

Effect of Surface Waviness on Transition in Three-Dimensional Boundary-Layer Flow

The effect of a surface wave on transition in three-dimensional boundary-layer flow over an infinite swept wing was studied. The mean flow computed using interacting boundary-layer theory, and transition was predicted using linear stability theory coupled with the empirical eN method. It was found that decreasing the wave height, sweep angle, or freestream unit Reynolds number, and increasing the freestream Mach number or suction level all stabilized the flow and moved transition onset to downstream locations.

Masad, Jamal A.↗

Geosat Follow-On (GFO) Altimeter Document Series: GFO On-Orbit Altimeter Noise Assessment - Volume 2

The purpose of this report is to present the results of an analysis of the white noise in Geosat Follow-On (GFO) altimeter data. The Repeat-Track Method was used to determine noise level. This approach was developed at TASC and has been used to quantify noise levels of all previous satellite altimeter missions. The GFO altimeter was designed to have an RMS white noise level of less than 3.5 centimeters for significant wave height less than 2 meters. The results of the analysis presented here show that the GFO altimeter meets this specification.

Driscoll, Mavis L.↗

Sea State and Weather Capability for NASA's Constellation Program

Marine weather and related parameters such as wind, ocean wave height and period, air temperature, sea surface temperature, visibility, and potential for icing are critical to the design, operation, and safety of crewed space vehicles. The National Aeronautics and Space Administration's (NASA's) Constellation Program requires detailed assessment of marine weather related parameters that may be encountered during launch, abort, landing, and crew rescue operations for the crewed Axes/Orion space vehicles. This information is required for both space vehicle design and operational purposes. The space vehicles must be designed such that they cam withstand the environment they are likely to encounter. The crewed Axes/Orion space vehicles will launch from NASA's Kennedy Space Center (KSC), Florida for both International Space Station (ISS) missions with 51.6deg inclination orbits and lunar missions with approximately 280 inclination orbits. Since both missions will fly ever the Atlantic Ocean on ascent to orbit and will fly over the Pacific Ocean on descent from orbit, an unlikely but possible emergency abort could require parachuting the Orion capsule and crew into the ocean. This situation could potentially put the crew in an isolated and hazardous environment for severn hours while they await rescue. Therefore, abort, landing, and crew rescue elements of the Constellation Program must address weather related parameters on a global scale. This paper describes buoy measurement data, sea surface temperature satellite data, and sea state computer model data that are being utilized by the Constellation Program to address these design and operational issues.

Barbre, R. E.↗

Sea State and Weather Assessment Capability for NASA's Constellation Program

Marine weather and related parameters such as wind, ocean wave height and period, air temperature, sea surface temperature, visibility, and potential for icing are critical to the design, operation, and safety of crewed space vehicles. The National Aeronautics and Space Administration's (NASA's) Constellation Program requires detailed assessment of marine weather related parameters that may be encountered during launch, abort, landing, and crew rescue operations for the crewed Ares/Orion space vehicles. This information is required for both space vehicle design and operational purposes. The space vehicles must be designed such that they can withstand the environment they are likely to encounter. The crewed Ares/Orion space vehicles will launch from NASA's Kennedy Space Center (KSC), Florida for both International Space Station (ISS) missions with 51.6 o inclination orbits and lunar missions with approximately 28 inclination orbits. Since both missions will fly over the Atlantic Ocean on ascent to orbit and will fly over the Pacific Ocean on descent from orbit, an unlikely but possible emergency abort could require parachuting the Orion capsule and crew into the ocean. This situation could potentially put the crew in an isolated and hazardous environment for several hours while they await rescue. Therefore, abort, landing, and crew rescue elements of the Constellation Program must address weather related parameters on a global scale. This paper describes buoy measurement data, sea surface temperature satellite data, and sea state computer model data that are being utilized by the Constellation Program to address these design and operational issues.

Barbre, B. J.↗

Station Keeping of Small Outboard-Powered Boats

Three station keeping controllers have been developed which work to minimize displacement of a small outboard-powered vessel from a desired location. Each of these three controllers has a common initial layer that uses fixed-gain feedback control to calculate the desired heading of the vessel. A second control layer uses a common fixed-gain feedback controller to calculate the net forward thrust, one of two algorithms for controlling engine angle (Fixed-Gain Proportional-integral-derivative (PID) or PID with Adaptively Augmented Gains), and one of two algorithms for differential throttle control (Fixed-Gain PID and PID with Adaptive Differential Throttle gains), which work together to eliminate heading error. The three selected controllers are evaluated using a numerical simulation of a 33-foot center console vessel with twin outboards that is subject to wave, wind, and current disturbances. Each controller is tested for its ability to maintain position in the presence of three sets of environmental disturbances. These algorithms were tested with current velocity of 1.5 m/s, significant wave height of 0.5 m, and wind speeds of 2, 5, and 10 m/s. These values were chosen to model conditions a small vessel may experience in the Gulf Stream off of Fort Lauderdale. The Fixed-gain PID controller progressively got worse as wind speeds increased, while the controllers using adaptive methodologies showed consistent performance over all weather conditions and decreased heading error by as much as 20%. Thus, enhanced robustness to environmental changes has been gained by using an adaptive algorithm.

Fisher, A. D.↗

POSTMAN: Point of Sail Tacking for Maritime Autonomous Navigation

Waves apply significant forces to small boats, in particular when such vessels are moving at a high speed in severe sea conditions. In addition, small high-speed boats run the risk of diving with the bow into the next wave crest during operations in the wavelengths and wave speeds that are typical for shallow water. In order to mitigate the issues of autonomous navigation in rough water, a hybrid controller called POSTMAN combines the concept of POS (point of sail) tack planning from the sailing domain with a standard PID (proportional-integral-derivative) controller that implements reliable target reaching for the motorized small boat control task. This is an embedded, adaptive software controller that uses look-ahead sensing in a closed loop method to perform path planning for safer navigation in rough waters. State-of-the-art controllers for small boats are based on complex models of the vessel's kinematics and dynamics. They enable the vessel to follow preplanned paths accurately and can theoretically control all of the small boat s six degrees of freedom. However, the problems of bow diving and other undesirable incidents are not addressed, and it is questionable if a six-DOF controller with basically a single actuator is possible at all. POSTMAN builds an adaptive capability into the controller based on sensed wave characteristics. This software will bring a muchneeded capability to unmanned small boats moving at high speeds. Previously, this class of boat was limited to wave heights of less than one meter in the sea states in which it could operate. POSTMAN is a major advance in autonomous safety for small maritime craft.

Huntsberger, Terrance L.↗

Acceleration Measurements During Landings of a 1/5.5-Size Dynamic Model of the Columbia XJL-1 Amphibian in Smooth Water and in Waves: Langley Tank Model 208M, TED No. NACA 2336

A 1/5.5-size powered dynamic model of the Columbia XJL-1 amphibian was landed in Langley tank no. 1 in smooth water and in oncoming waves of heights from 2.1 feet to 6.4 feet (full-size) and lengths from 50 feet to 264 feet (full-size). The motions and the vertical accelerations of the model were continuously recorded. The greatest vertical acceleration measured during the smooth-water landings was 3.1g. During landings in rough water the greatest vertical acceleration measured was 15.4g, for a landing in 6.4-foot by 165-foot waves. The impact accelerations increased with increase in wave height and, in general, decreased with increase in wave length. During the landings in waves the model bounced into the air at stalled attitudes at speeds below flying speed. The model trimmed up to the mechanical trim stop (20 deg) during landings in waves of heights greater than 2.0 feet. Solid water came over the bow and damaged the propeller during one landing in 6.4-foot waves. The vertical acceleration coefficients at first impact from the tank tests of a 1/5.5-size model were in fair agreement with data obtained at the Langley impact basin during tests of a 1/2-size model of the hull.

Clement, Eugene P.↗

Hurricane Directional Wave Spectrum Spatial Variation at Landfall

On 26 August 1998, the SRA at 2.2 km height documented the directional wave spectrum in the region between Charleston, SC, and Cape Hatteras, NC, as Hurricane Bonnie was making landfall near Wilmington, NC. The storm was similar in size during the two flights, but the maximum speed in the NOAA Hurricane Research Division surface wind analysis was 15% lower prior to landfall (39 m/s) than it had been in the open ocean (46 m/s). This was compensated for by its faster movement prior to landfall (9.5 m/s) than when it was encountered in the open ocean (5 m/s), significantly increasing the effective fetch and duration of waves near the peak of the spectrum which propagated in the direction of the storm track. The open ocean wave height variation indicated that Hurricane Bonnie would have produced waves of 11 m significant wave height on the shore northeast of Wilmington had it not been for the continental shelf. The bathymetry distributed the steepening and breaking process across the shelf so that the wavelength and wave height were reduced gradually as the shore was approached. The wave height 5 km from shore was about 4 in.

Walsh, E. J.↗

Theoretical aspects of tidal and planetary wave propagation at thermospheric heights

A simple semiquantitative model is presented which allows analytic solutions of tidal and planetary wave propagation at thermospheric heights. This model is based on perturbation approximation and mode separation. The effects of viscosity and heat conduction are parameterized by Rayleigh friction and Newtonian cooling. Because of this simplicity, one gains a clear physical insight into basic features of atmospheric wave propagation. In particular, we discuss the meridional structures of pressure and horizontal wind (the solutions of Laplace's equation) and their modification due to dissipative effects at thermospheric heights. Furthermore, we solve the equations governing the height structure of the wave modes and arrive at a very simple asymptotic solution valid in the upper part of the thermosphere. That 'system transfer function' of the thermosphere allows one to estimate immediately the reaction of the thermospheric wave mode parameters such as pressure, temperature, and winds to an external heat source of arbitrary temporal and spatial distribution. Finally, the diffusion effects of the minor constituents due to the global wind circulation are discussed, and some results of numerical calculations are presented.

Volland, H.↗

Numerical Assessment of Four-Port Through-Flow Wave Rotor Cycles with Passage Height Variation

The potential for improved performance of wave rotor cycles through the use of passage height variation is examined. A Quasi-one-dimensional CFD code with experimentally validated loss models is used to determine the flowfield in the wave rotor passages. Results indicate that a carefully chosen passage height profile can produce substantial performance gains. Numerical performance data are presented for a specific profile, in a four-port, through-flow cycle design which yielded a computed 4.6% increase in design point pressure ratio over a comparably sized rotor with constant passage height. In a small gas turbine topping cycle application, this increased pressure ratio would reduce specific fuel consumption to 22% below the un-topped engine; a significant improvement over the already impressive 18% reductions predicted for the constant passage height rotor. The simulation code is briefly described. The method used to obtain rotor passage height profiles with enhanced performance is presented. Design and off-design results are shown using two different computational techniques. The paper concludes with some recommendations for further work.

Paxson, D. E.↗

The tropospheric-stratospheric polar vortex breakdown of January 1977

An extraordinary warming of the stratosphere in December-January 1976-77 was followed by tropospheric warming in the polar region and cooling in middle latitudes. During January 10-20, the associated polar anticyclone extended from the surface to 10 mb. Antecedents of the polar vortex breakdown are reviewed with the aid of results of zonal-harmonic analyses of planetary waves, for heights of the pressure surfaces (700-10 mb), temperature, and mean stratospheric temperature (the latter determined from satellite radiation measurements). Wave 1 in height and temperature played a dominant role in the stratosphere, attaining amplitudes of 1600 gpm and 25 C, respectively, at 10 mb. On the other hand, superposition of retrogressing wave 1 and quasi-stationary wave 2 in the height of the 300-mb surface, with individual amplitudes exceeding 300 gpm, is judged to have been an important factor in the overall development.

Quiroz, R. S.↗