Search NASA⌕ Search

SEARCH · Search NASA

Results for “weakened”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

A full potential inverse method based on a density linearization scheme for wing design

A mixed analysis inverse procedure based on the full potential equation in conservation form was developed to recontour a given base wing to produce density linearization scheme in applying the pressure boundary condition in terms of the velocity potential. The FL030 finite volume analysis code was modified to include the inverse option. The new surface shape information, associated with the modified pressure boundary condition, is calculated at a constant span station based on a mass flux integration. The inverse method is shown to recover the original shape when the analysis pressure is not altered. Inverse calculations for weakening of a strong shock system and for a laminar flow control (LFC) pressure distribution are presented. Two methods for a trailing edge closure model are proposed for further study.

Shankar, V.↗
NASA NTRS1982

An investigation of impurity centers in semiconductors of variable composition. Part 1: General theory and some applications

A theory of deep point defects imbedded in otherwise perfect semiconductor crystals is developed with the aid of pseudopotentials. The dominant short-range forces engendered by the impurity are sufficiently weakened in all cases where the cancellation theorem of the pseudopotential formalism is operative. Thus, effective-mass-like equations exhibiting local effective potentials derived from nonlocal pseudopotentials are shown to be valid for a large class of defects. A two-band secular determinant for the energy eigenvalues of deep defects is also derived from the set of integral equations which corresponds to the set of differential equations of the effective-mass type. Subsequently, the theory in its simplest form, is applied to the system Al(x)Ga(1-x)As:Se. It is shown that the one-electron donor level of Se within the forbidden gap of Al(x)Ga(1-x)As as a function of the AlAs mole fraction x reaches its maximum of about 300 meV (as measured from the conduction band edge) at the cross-over from the direct to the indirect band-gap at x = 0.44 in agreement with experiments.

Vonroos, O. H.↗
NASA NTRS1983

Evaluation of GOES encoder lamps

Aging characteristics and life expectancies of flight quality, tungsten filament, encoder lamps are similar to those of 'commercial' grade gas filled lamps of similar construction, filament material and filament temperature. The aging and final failure by filament burnout are caused by single crystal growth over large portions of the filament with the concomitant development of facets and notches resulting in reduction of cross section and mechanical weakening of the filament. The life expectancy of presently produced lamps is about one year at their nominal operating voltage of five volts dc. At 4.5 volts, it is about two years. These life times are considerably shorter, and the degradation rates of lamp current and light flux are considerably higher, than were observed in the laboratory and in orbit on lamps of the same type manufactured more than a decade ago. It is speculated that the filaments of these earlier lamps contained a crystallization retarding dopant, possibly thorium oxide. To obtain the desired life expectancy of or = to four years in present lamps, operating voltages of or = to four volts dc would be required.

Viehmann, W.↗
NASA NTRS1983

Evaluation of fuel additives for reduction of material imcompatibilities in methanol-gasoline blends

Screening tests determined the efficacy of six commercially available additives as modifiers of methanol's corrosivity toward metals and its weakening of tensile properties of nonmetals in automotive fuel systems. From the screening phase, three additives which seemed to protect some of the metals were tested in higher concentrations and binary combinations in search of optimal application conditions. Results indicate that two of the additives have protective properties and combining them increases the protection of the metals corroded by methanol-gasoline blends. Half of the metals in the tests were not corroded. Testing at recommended concentrations and then at higher concentrations and in combinations shows that the additives would have no protective or harmful effects on the nonmetals. Two additives emerged as candidates for application to the protection of metals in automotive methanol-gasoline fuel systems. The additives tested were assigned letter codes to protect their proprietary nature.

Rodriguez, C. F.↗
NASA NTRS1983

Vehicle test report: South Coast Technology electric Volkswagen Rabbit with developmental low-power armature chopper

Dynamometer performance of a South Coast Technology electric conversion of a Volkswagen (VW) Rabbit designated SCT-8 was tested. The SCT-8 vehicle was fitted with a transistorized chopper in the motor armature circuit to supplement the standard motor speed control via field weakening. The armature chopper allowed speed control below the motor base speed. This low speed control was intended to reduce energy loss at idle during stop-and-go traffic; to eliminate the need for using the clutch below base motor speed; and to improve the drivability. Test results indicate an improvement of about 3.5% in battery energy economy for the SAE J227a-D driving cycle and 6% for the C-cycle with only a minor reduction in acceleration performance. A further reduction of about 6% would be possible if provision were made for shutting down field power during the idle phases of the driving cycles. Drivability of the vehicle equipped with the armature chopper was significantly improved compared with the standard SCT Electric Rabbit.

Marte, J. E.↗
NASA NTRS1982

NDE of simulated Space Shuttle tile disbonds

A technique which involves the use of ultrasonic Lamb waves for assaying the structural integrity of adhesive bonds between layered materials on thin metal plates, particularly with regard to the Shuttle TPS, is presented. The Lamb waves are generated by a pulse impact, resulting in surface waves propagating radially at 2.4 mm/microsec. Trials were performed with the sound waves applied to samples, of aluminum similar to the Orbiter external skin, which were coated with Teflon and a RTV silicone screed. The goal was to detect localized debonded areas or potentially debonded areas, which, during reentry, could result in blistering of the aluminum skin. The ultrasonic probes are described, noting the usage of broadband ultrasonic harmonics and a minicomputer processor. The testing system was found to accurately identify weakened bonds by the ratio of high and low frequency component areas of the received signal of the Lamb waves sent across the surface.

Ahlberg, L.↗
NASA NTRS1983

On the seasonal sea ice cover of the Sea of Okhotsk

Satellite microwave imagery has allowed determination of sea ice conditions in the Sea of Okhotsk over years 1973-1976. Comparisons of the general features of the cycle of sea ice distribution with basic oceanographic factors shows that ice forms first in cold, shallow, low-salinity waters and then seems to drift in a direction approximating the Okhotsk-Kuril current system. The heaviest ice cover occurred in 1973, followed by a much weaker ice cover in 1974. Only the 1972-73 growth season experienced close to monotonic advance. A much greater weakening of the ice cover through polynya formation occurred during the 1976 decay season than in any of the other three years. Two fairly common ice macrostructures in the Sea of Okhotsk were identified as a rectangular structure and a wedge structure; these are strongly correlated with the bathymetry of the region and with the known current system.

Parkinson, C. L.↗
NASA NTRS1983

Observation of ice mantles toward HD 29647

The water ice absorption band at 3.1 microns has been observed in HD 29647, which is a late B type star with an anomalous ultraviolet extinction curve. The interpretation is that ice mantles are present on the dust grains in the intervening cloud and that these mantles are responsible for suppressing the 2200 A interstellar absorption feature. This is the first observation of both the 2200 A region and the 3.1 micron interstellar absorption feature toward the same star. A comparison of recent UV laboratory data of water ice with the UV spectrum of HD 29647 further supports the presence of water ice mantles in the same column density as that observed in the infrared. The diffuse interstellar features have been reported to be weakened in this star, consistent with their origin being on grain core surfaces, rather than in mantles or gaseous molecules.

Goebel, J. H.↗
NASA NTRS1983

Thunderstorm top structure observed by aircraft overflights with an infrared radiometer

Thunderstorm top structure is examined with high spatial resolution radiometric data (visible and infrared) from aircraft overflights together with other storm views, including geosynchronous satellite observations. Results show that overshooting cumuliform towers appear as distinct cold areas in the high resolution, 11-micron IR aircraft images, but that the geosynchronous satellite observations significantly overestimate the thunderstorm-top IR brightness temperature, T(B), due to field of view effects. Profiles of cloud top height and T(B) across overshooting features indicate an adiabatic cloud surface lapse rate. However, one-dimensional cloud model results indicate that when comparing thunderstorm top temperature and height at different times or different storms, a temperature-to-height conversion of about 7 K/km is appropriate. Examination of mature storm evolution indicates that, during periods when the updraft is relatively intense, the satellite IR 'cold point' is aligned with the low-level radar reflectivity maximum, but during periods of updraft weakening and lowering cloud top heights, the satellite T(B) minimum occurs downwind with cirrus anvil debris. The growth period of a relatively weak cumulonimbus cluster is also examined with aircraft and satellite data.

Adler, R. F.↗
NASA NTRS1983

Fracture behavior of unidirectional boron/aluminum composite laminates

An experiment was conducted to verify the results of mathematical models which predict the stresses and displacements of fibers and the amount of damage growth in a center-notched lamina as a function of the applied remote stress and the matrix and fiber material properties. A brittle lacquer coating was used to detect the yielding in the matrix while X-ray techniques were used to determine the number of broken fibers in the laminate. The notched strengths and the amounts of damage found in the specimens agree well with those predicted by the mathematical model. It is shown that the amount of damage and the crack opening displacement does not depend strongly on the number of plies in the laminate for a given notch width. By heat-treating certain laminates to increase the yield stress of the alumina matrix, the effect of different matrix properties on the fracture behavior was investigated. The stronger matrix is shown to weaken the notched laminate by decreasing the amount of matrix damage, thereby making the laminate more notch sensitive.

Goree, J. G.↗
NASA NTRS1984

The orbit of Lageos and solar eclipses

An eclipse of the Sun by the Moon as seen by the Lageos satellite can affect the orbital semimajor axis at the centimeter level. The weakened radiation pressure acting on Lageos perturbs the orbit differently from that due to full sunlight. This difference amounted to less than 2 mm in the semimajor axis for 23 of the 30 eclipses Lageos experienced between launch in 1976 and the end of 1983. However, it was 17.6 mm for the eclipses on 28 March 1979 and 11.2 mm for the one on 15 December 1982. Differences such as these generate large enough along-track errors to make it worthwhile to include eclipses in complex orbit determination programs such as GEODYN which integrate the orbit. Eclipses cannot explain the presently unmolded variations in along-track acceleration which have a magnitude of about 3 x 10(-12) ms(-2).

Rubincam, D. P.↗
NASA NTRS1983

Interply layer degradation effects on composite structural response

Recent research activities at NASA Lewis Research Center to computationally evaluate the effects of interply layer progressive weakening (degradation) on the structural response of a composite beam are summarized. The structural responses of interest include: (1) bending, (2) buckling, (3) free vibrations, (4) periodic excitation, and (5) impact. Finite element analysis was used for the computational evaluations. The interply layer degradation effects on the various structural responses were determined and assessed as a function of the interply layer modulus varying from 1 million psi down to 1000 psi and even lower for some limiting cases. The results obtained show that the interply layer degradation has generally negligible effects on composite structural response and, therefore, structural integrity, unless the interply layer modulus degrades to about 10,000 psi or less.

Chamis, C. C.↗
NASA NTRS1983

The structure of the heliospheric current sheet - 1978-1982

Continuing the study near solar minimum in 1976-1977 (Hoeksema et al., 1982), the configuration of the heliospheric magnetic field for the period 1976-1982 is calculated using a potential field model. Particular attention is given to the structure during the rising phase, maximum, and early decline of sunspot cycle 21, from 1978 to 1982. Four warps in the current sheet (the boundary between interplanetary magnetic field toward and away from the sun) are seen early in this interval; these give rise to a four-sector structure in the interplanetary magnetic field observed at earth. It is noted that the location of the current sheet changes slowly and extends to a heliographic latitude of approximately 50 deg. The strength of the polar field correction throughout this period is determined and included in the model calculations. The lower latitude magnetic fields become much stronger as the polar fields weaken and reverse polarity near maximum, decreasing the effect of the polar field correction.

Hoeksema, J. T.↗
NASA NTRS1984

Colloidally separated samples from Allende residues - Noble gases, carbon and an ESCA-study

Results are presented which strengthen the hypothesis of heterogeneity among the carbon- and nitrogen-bearing phases of the Allende meteorite. These data also highlight the possibility of performing physical separations yielding samples in which some of the noble gas- and carbon-bearing phases are extraordinarily predominant over others. The conclusion, based on mass and isotope balance arguments, that a significant portion of the carbonaceous matter in Allende is likely to be gas-poor or gas-free need not weaken the case for carbonaceous carriers for the major noble gas components. The concept that acid-soluble carbonaceous phases contain a multiplicity of components, each of which may have formed under a multiplicity of different physical-chemical conditions, is reemphasized by the results of the present study.

Ott, U.↗
NASA NTRS1984

Fault friction, regional stress, and crust-mantle coupling in southern California from finite element models

To determine the correct fault rheology of the Transverse Ranges area of California, a new finite element to represent faults and a mangle drag element are introduced into a set of 63 simulation models of anelastic crustal strain. It is shown that a slip rate weakening rheology for faults is not valid in California. Assuming that mantle drag effects on the crust's base are minimal, the optimal coefficient of friction in the seismogenic portion of the fault zones is 0.4-0.6 (less than Byerly's law assumed to apply elsewhere). Depending on how the southern California upper mantle seismic velocity anomaly is interpreted, model results are improved or degraded. It is found that the location of the mantle plate boundary is the most important secondary parameter, and that the best model is either a low-stress model (fault friction = 0.3) or a high-stress model (fault friction = 0.85), each of which has strong mantel drag. It is concluded that at least the fastest moving faults in southern California have a low friction coefficient (approximtely 0.3) because they contain low strength hydrated clay gouges throughout the low-temperature seismogenic zone.

Bird, P.↗
NASA NTRS1983

Factors influencing the thermally-induced strength degradation of B/Al composites

Literature data related to the thermally-induced strength degradation of B/Al composites were examined in the light of fracture theories based on reaction-controlled fiber weakening. Under the assumption of a parabolic time-dependent growth for the interfacial reaction product, a Griffith-type fracture model was found to yield simple equations whose predictions were in good agreement with data for boron fiber average strength and for B/Al axial fracture strain. The only variables in these equations were the time and temperature of the thermal exposure and an empirical factor related to fiber surface smoothness prior to composite consolidation. Such variables as fiber diameter and aluminum alloy composition were found to have little influence. The basic and practical implications of the fracture model equations are discussed. Previously announced in STAR as N82-24297

Dicarlo, J. A.↗
NASA NTRS1984

On the dispersion in brightness of far-ultraviolet emission lines of cool giant stars

Low-resolution spectra have been obtained with the short-wavelength camera of IUE for late-type giant stars of spectral type F5 III-G8 III. These stars are believed to be in their first crossing of the H-R diagram, as inferred from their location along the blue edge of the Hertzsprung gap or their high abundance of lithium. From the earliest spectral type observed along the blue edge of the gap, the normalized C IV flux, which is indicative of 100,000 K plasma, increases to a maximum at G0 and then falls with advancing spectral type. The total range in emission measure of 100,000 K gas is an order of magnitude or more among stars making their first appearance as yellow giants and averages about 25 times higher in these stars than in other G8-K0 yellow giants, the majority of which are probably He-burning post-red giants. The observations tentatively show that transition region emission, and by inference coronal emission, increases in intensity with the growth of convection zones in late-type giants and then declines at lower surface temperatures, perhaps because of rotational spin-down and a weakening of dynamo action.

Simon, T.↗
NASA NTRS1984

Climate studies with a multilayer energy balance model. III - Climatic impact of stratospheric volcanic aerosols

A multilayer energy balance model is applied in an examination of the sensitivity of climate to stratospheric aerosols induced by volcanic eruptions. Zonally and annually averaged quantities are considered, with ocean and land temperatures computed separately and the atmosphere below the 200 mb level divided into eight layers of 24 sublayers each. The aerosol is assumed to form in the 150-200 mb range. Aerosol parameters for radiative transfer calculations are reflection in the solar spectral region and absorption in the solar and IR regions. A 75 percent aqueous solution of sulfuric acid is assumed for the aerosols. The sensitivity of the hemispherically averaged surface temperature is enhanced 37 percent, with a 20 percent uncertainty, when the thermal IR radiation is excluded. The solar radiation enhances the surface temperatures to a higher degree than the thermal radiation. The maximum response to the evenly distributed aerosols is in the 60-70 deg N latitudes and propagates, weakening, to lower latitudes.

Chou, M.-D.↗