Search NASA⌕ Search

SEARCH · Search NASA

Results for “ABSTRACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Embedded Fluidic Sensing and Control with Soft Open‐Cell Foams

Abstract The synthesis of soft matter intelligence with circuit‐driven logic has enabled a new class of robots that perform complex tasks or conform to specialized form factors in unique ways that cannot be realized through conventional designs. Translating this hybrid approach to fluidic systems, the present work addresses the need for sheet‐based circuit materials by leveraging the innate porosity of foam—a soft material—to develop pneumatic components that support digital logic, mixed‐signal control, and analog force sensing in wearables and soft robots. Analytical tools and experimental techniques developed in this work serve to elucidate compressible gas flow through porous sheets, and to inform the design of centimeter‐sized foam resistors with fluidic resistances on the order of 10 9 Pa s m −3 . When embedded inside soft robots and wearables, these resistors facilitate diverse functionalities spanning both sensing and control domains, including digital logic using textile logic gates, digital‐to‐analog signal conversion using ladder networks, and analog sensing of forces up to 40 N via compression‐induced changes in resistance. By combining features of both circuit‐based and materials‐based approaches, foam‐enabled fluidic circuits serve as a useful paradigm for future hybrid robotic architectures that fully embody the sensing and computing capabilities of soft fluidic materials.

Rajappan, Anoop↗
DOE OSTI2024

Photoluminescence Probes Ion Insertion into Amorphous and Crystalline Regions of Organic Mixed Conductors

Abstract Organic mixed ionic‐electronic conductors (OMIECs) have emerged as promising materials for a wide range of next‐generation technologies, including bioelectronics and neuromorphic computing. The performance of these materials depends on the transport of ions through the polycrystalline polymer matrix as well as how the distribution of ions and polarons in crystalline and amorphous regions impacts electronic transport. However, it is often challenging to distinguish whether ions enter crystalline or amorphous regions. In this work, steady‐state and time‐resolved photoluminescence (PL) spectroelectrochemistry is used to probe initial ion insertion in crystalline and amorphous regions of the OMIEC material poly(3‐[2‐[2‐(2‐methoxyethoxy)ethoxy]ethyl]thiophene ‐2,5‐diyl) (P3MEEET) as a function of applied voltage. It is found that PL spectroelectrochemistry reports on the initial stages of electrochemical doping through the quenching of PL emission. By distinguishing between amorphous and crystalline contributions to the PL spectrum, ion insertion in crystalline and amorphous regions as a function of voltage is tracked. It is found that PL spectroelectrochemistry is much more sensitive to the initial injection of ions than complementary methods, highlighting its potential as a sensitive tool for interrogating ion injection in OMIECs.

Collins, Garrett W.↗
DOE OSTI2024

Searching Materials Space for Hydride Superconductors at Ambient Pressure

Abstract A machine‐learning‐assisted approach is employed to search for superconducting hydrides under ambient pressure within an extensive dataset comprising over 150 000 compounds. The investigation yields ≈50 systems with transition temperatures surpassing 20 K, and some even reaching above 70 K. These compounds have very different crystal structures, with different dimensionality, chemical composition, stoichiometry, and arrangement of the hydrogens. Interestingly, most of these systems display slight thermodynamic instability, implying that their synthesis will re quire conditions beyond ambient equilibrium. Moreover, a consistent chemical composition is found in the majority of these systems, which combines alkali or alkali‐earth elements with noble metals. This observation suggests a promising avenue for future experimental investigations into high‐temperature superconductivity within hydrides at ambient pressure.

Cerqueira, Tiago F. T.↗
DOE OSTI2024

Low‐Volume Cores for Fabrication of Compact, Versatile, and Intelligent Soft Systems

Abstract This study introduces the low‐volume core (LVC) fabrication method, which enables the monolithic molding of compact, complex, versatile, and intelligent soft robotic systems. This method uses thin and flexible thermoplastic sheets to mold internal chambers in soft fluidic actuators, valves, and circuits. The LVC fabrication method creates low‐volume networks in soft actuators (LV‐net actuators) that can be made with compact and complex geometries, enabling both low actuation volume input and multi‐degree‐of‐freedom actuators. LVC fabrication can also be used for compact, completely soft, and monolithic logic components (valves with low‐volume core, also called as LV valves) to provide directional resistance as well as a switching mechanism that enables fluidic logic in soft systems. The compatibility of the fabrication methods for both soft actuators and valves facilitates the creation of compact, integrated, and versatile soft robotic systems with embodied intelligence. This study introduces two examples of such intelligent soft robotic systems that integrate both LV‐net actuators and LV valves to demonstrate capability for complex system fabrication.

Yu, Qifan↗
DOE OSTI2024

Efficient and Photostable Organic Solar Cells Achieved by Alloyed Dimer Acceptors with Tailored Linker Structures

Abstract High power conversion efficiency (PCE) and long‐term stability are prerequisites for commercialization of organic solar cells (OSCs). Herein, two dimer acceptors (DYTVT and DYTCVT) are developed with different properties through linker engineering, and study their effects as alloy‐like acceptors on the photovoltaic performance and photostability of OSCs. These ternary OSCs effectively combine the advantages of both dimer acceptors. DYTVT, characterized by its high backbone planarity, ensures elevated electron mobility and high glass‐transition temperature (T g ), leading to efficient charge transport and enhanced photostability of OSCs. Conversely, DYTCVT, with its significant dipole moment and electrostatic potential, enhances compatibility of the alloy acceptors with donors and refines the blend morphology, facilitating efficient charge generation in OSCs. Consequently, D18:DYTVT:DYTCVT OSCs exhibit higher PCE (18.4%) compared to D18:MYT (monomer acceptor, PCE = 16.5%), D18:DYTVT (PCE = 17.4%), and D18:DYTCVT (PCE = 17.0%) OSCs. Furthermore, owing to higherT g of alloy acceptors (133 °C) than MYT (T g = 80 °C) and DYTCVT (T g = 120 °C), D18:DYTVT:DYTCVT OSCs have significantly higher photostability (t 80% lifetime = 4250 h under 1‐sun illumination) compared to D18:MYT (t 80% lifetime = 40 h) and D18:DYTCVT OSCs (t 80% lifetime = 2910 h).

Chemistry↗
DOE OSTI2024

Breaking Barriers in Chalcogenide Perovskite Synthesis: A Generalized Framework for Fabrication of BaMS 3 (M═Ti, Zr, Hf) Materials

Abstract Chalcogenide perovskites have garnered increasing attention as stable, non‐toxic alternatives to lead halide perovskites. However, their conventional synthesis at high temperatures (>1000 °C) has hindered widespread adoption. Recent studies have developed low‐to‐moderate temperature synthesis methods (<600 °C) using reactive precursors, yet a comprehensive understanding of the pivotal factors affecting reproducibility and repeatability remains elusive. This study delineates the critical factors in the low‐temperature synthesis of BaMS 3 (M═Zr, Hf, Ti) compounds and presents a generalized framework. Innovative approaches are developed for synthesizing BaMS 3 compounds using this framework involving organometallics for solution deposition. The molecular precursor routes, employing metal acetylacetonates to generate soluble metal–sulfur bonded complexes and metal–organic compounds to produce soluble metal‐thiolate, metal‐isothiocyanate, and metal‐trithiocarbonate species, are demonstrated to yield carbon‐free BaMS 3 . These methods have achieved the most contiguous films of BaZrS 3 and BaHfS 3 using solution deposition to date. Furthermore, a hybrid solution processing method involving stacking sputter‐deposited Zr and solution‐deposited BaS layers is employed to synthesize a contiguous, oxygen‐free BaZrS 3 film. The diffuse reflectance measurements indicate a direct bandgap of ≈ 1.85 eV for the BaZrS 3 films and ≈ 2.1 eV for the BaHfS 3 film under investigation.

25 ENERGY STORAGE↗
DOE OSTI2024

Phloroglucinol–2,6‐Diaminoanthraquinone as a Durable Redox Mediator for Enhancing Conversion Reaction Kinetics in Lithium‐Sulfur Batteries

Abstract Lithium‐sulfur batteries, despite being a promising solution for next‐generation secondary batteries, require substantial efforts to overcome the challenges of sluggish sulfur redox kinetics, polysulfides shuttling, and Li metal instability before achieving practical viability. Conventional strategies that utilize metal catalysts or soluble redox mediators (RMs) are limited by either impractical producing processes or unsatisfactory service life. Herein, an electrochemically active organic material, phloroglucinol – 2,6‐diaminoanthraquinone (PG‐DAAQ) is synthesized through a green and facile polymerization process to better resolve these issues. Serving as an RM at the cathode, PG‐DAAQ exhibits enduring redox activity within the sulfur operating potential window, leading to enhanced redox kinetics and sulfur utilization. Remarkably, even without any metal elements, PG‐DAAQ exhibits an excellent affinity to polysulfides, thereby suppressing the shuttling and facilitating the formation of a more favorable solid‐electrolyte interface to stabilize Li deposition at the anode. As a result, Li‐S cells employing PG‐DAAQ show significantly enhanced cycling and rate performances than the control cells. Even with a low electrolyte‐to‐sulfur ratio of 6, pouch cells with PG‐DAAQ deliver a reversible discharge capacity of 821 mA h g −1 after 100 cycles at a C/10 rate.

Lai, Tianxing↗
DOE OSTI2024

Impact of Linker Engineering in Core‐Linked Dimeric Acceptors for High‐Performance Organic Solar Cells

Abstract The dimerization of small molecule acceptors (SMAs) is a promising strategy for enhancing the long‐term stability and power conversion efficiency (PCE) of organic solar cells (OSCs). However, the reported DSMAs are primarily limited to end‐linked molecular configurations, highlighting the need for further exploration of various dimer architectures. Herein, the development of two distinct core‐linked dimerized SMAs (DYF‐V and DYF‐E) are reported with tailored linker structures (vinylene and ethynyl, respectively), achieving high‐performance OSCs (PCE = 18.53%). Interestingly, a subtle change in the linker structures results in markedly different molecular properties and photovoltaic performances of the dimer acceptors. DYF‐E with an ethynyl linker exhibits more twisted backbone conformation and mitigated aggregation property compared to DYF‐V, inducing desirable blend morphologies with a polymer donor including high crystallinity, face‐on oriented packing structures, and well‐intermixed domains. Thus, the DYF‐E‐based OSCs exhibit a high PCE (17.02%), which significantly outperforms the DYF‐V‐based OSCs (PCE = 9.98%). Furthermore, the ternary OSCs based on DYF‐E achieve a higher PCE of 18.53%. Thus, this study highlights the significance of selecting an appropriate linker in core‐linked dimerized SMAs for producing high‐performance OSCs.

Oh, Shinbee↗
DOE OSTI2024

Enhancing Cycling Stability of Lithium Metal Batteries by a Bifunctional Fluorinated Ether

Abstract The lifespan of lithium (Li) metal batteries (LMBs) can be greatly improved by the formation of inorganic‐rich electrode‐electrolyte interphases (EEIs) (including solid‐electrolyte interphase on anode and cathode‐electrolyte interphase on cathode). In this work, a localized high‐concentration electrolyte containing lithium bis(fluorosulfonyl)imide (LiFSI) salt, 1,2‐dimethoxyethane (DME) solvent and 1,2‐bis(1,1,2,2‐tetrafluoroethoxy)ethane (BTFEE) diluent is optimized. BTFEE is a fluorinated ether with weakly‐solvating ability for LiFSI so it also acts as a co‐solvent in this electrolyte. It can facilitate anion decomposition at electrode surfaces and promote the formation of more inorganic‐rich EEI layers. With an optimized molar ratio of LiFSI:DME:BTFEE = 1:1.15:3, LMBs with a high loading (4 mAh cm −2 ) lithium nickel manganese cobalt oxide (LiNi 0.8 Mn 0.1 Co 0.1 ) cathode can retain 80% capacity in 470 cycles when cycled in a voltage range of 2.8–4.4 V. The fundamental understanding on the functionality of BTFEE revealed in this work provides new perspectives on the design of practical high‐energy density battery systems.

25 ENERGY STORAGE↗
DOE OSTI2024

Deconstructing the High Voltage Degradation Mechanisms in Na 2/3 Ni 1/3 Mn 2/3 O 2 with Single Crystals and Advanced Electrolyte

Abstract Sodium layered oxide cathodes can uniquely benefit from the existing lithium‐ion battery industry as sodium‐ion batteries gain traction as a potential low‐cost, drop‐in replacement. However, achieving relevant energy density with a suitable cycle life remains a challenge for sodium layered oxides. At high operating potentials, several competing degradation mechanisms prevent P2‐type Na 2/3 Ni 1/3 Mn 2/3 O 2 (≈550 Wh kg −1 ) from achieving meaningful cycle life—with bulk structural instability and surface reactivity being the primary retractors. Herein, the issue of particle cracking is addressed through detailed synthesis methods of “single‐crystal” materials. By comparison to a polycrystalline baseline, the single‐crystal materials quantify the capacity loss due to isolation of active material caused by intergranular particle cracking. The single crystal materials are then employed in cells with an advanced, “localized saturated electrolyte” (LSE) to demonstrate the magnitude of capacity loss due to electrolyte decomposition at the cathode surface. Mitigation of the surface reactivity through the LSE electrolyte effectively demonstrates the elevated importance of surface reactivity at high voltages despite the onset of egregious particle cracking. This work aims to guide future research into understanding molten‐salt assisted syntheses and advance the debate on surface versus bulk degradation.

Darga, Joe↗
DOE OSTI2024

Color‐Stable, All‐Phosphorescent White Organic Light Emitting Diodes Using the Polariton‐Enhanced Purcell Effect

Abstract The short operational lifetimes of high efficiency phosphorescent organic blue light emitting devices (PHOLEDs) has limited their use in displays and lighting. Previously, this problem has been avoided by using less efficient fluorescent blue devices in separately biased red, green, and blue emissive elements to achieve stable full color emission. However, the operational lifetime of blue phosphorescent OLEDs has been significantly improved through the utilization of the plasmon‐exciton‐polariton‐enhanced (PEP) Purcell effect. Here, a white emitting PHOLED comprising stacked red, green, and blue elements is demonstrated that exploits PEPs to extend the operational lifetime of the blue element such that all emissive layers degrade at the same rate. The device features white light emission with an external quantum efficiency of 19.1 ± 0.4%, luminous power efficiency of 13.3 ± 0.3 lm W −1 at a luminance of 1000 cd m −2 when measured over 4π solid angle, with a color rendering index of 76 unchanged throughout the device aging to 70% of its initial luminance, T 70 . A 2.9 times enhancement in the operational lifetime of the Purcell‐enhanced device is achieved to yield T 70 = 2900 ± 100 h for an initial luminance of 1000 cd m −2 , compared to devices lacking this enhancement with T 70 = 1000 ± 100 h.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unusually Strong Near‐Infrared Photoluminescence of Highly Transparent Bulk InSe Flakes

Abstract Bulk γ‐InSe has a direct bandgap of 1.24 eV, which corresponds to near infrared wavelengths ( λ = 1.0 µm) useful in optoelectronic applications from biometric detectors to silicon photonics. However, its potential for optoelectronic applications is largely untapped due in part to the lack of quantitative studies of its optical properties. Here, the unusually low absorptance and high photoluminescence quantum efficiency of single‐crystalline InSe flakes with thickness in the hundreds of nanometers are studied. InSe emits brightly at room temperature from its direct bandgap with a peak photoluminescence quantum yield (PLQY) of 20%, despite displaying indirect bandgap like low absorption coefficient due to the symmetry of its crystal structure. By performing pump‐dependent PLQY measurements, the radiative and nonradiative recombination coefficients are extracted, including the Shockley‐Read‐Hall and Auger coefficients. Finally, a proof‐of‐concept alternating current electroluminescent device at low temperature is demonstrated to show the promise of InSe in optoelectronic technology such as highly transparent, bright NIR light sources.

Geng, Jamie↗
DOE OSTI2024

Ink Casting and 3D‐Extrusion Printing of Yb 14 MnSb 11 for High‐Temperature Thermoelectric Material

Abstract Complex shapes are created from Yb 14 MnSb 11 , a high‐temperature thermoelectric Zintl phase, via a two‐step process: i) layer‐by‐layer 3D‐extrusion of ink containing partially‐reacted powders which are ball‐milled from a blend of Yb, MnSb, and Sb powders; ii) heat treatment to synthesize the ternary compound Yb 14 MnSb 11 and densify the extruded powders. A high phase purity for Yb 14 MnSb 11 (83–94%) is achieved in both cast and 3D‐extruded ink specimens via a solid‐state reaction between Yb, MnSb, and Yb 4 Sb 3 during reactive sintering. Pressure‐free sintering at temperatures of 1200–1400 °C densifies the powders to 82% relative density but can also induce the decomposition of the Yb 14 MnSb 11 phase due to Yb sublimation. A process window with optimized sintering temperature and time is identified, achieving both low porosity and high phase purity and reaching a maximum zT = 0.61 at 1000 °C, about half of the maximum zT value for bulk Yb 14 MnSb 11 made via conventional processes (pressure sintering of precursor powders). The present approach – direct ink writing of ball‐milled powders, combined with reactive sintering – is a scalable and affordable method to fabricate thermoelectric legs with intricate 3D shapes, for enhanced performances in high‐temperature thermoelectric applications.

Chen, Ming [Department of Materials Science &amp, ↗
DOE OSTI2024

Direct and Inverse Photoelectron Spectroscopy Evidence for a Revised Picture of Electronic States of Negative Polarons in n‐Doped C 60

Abstract Determining the electronic levels associated with polarons, the fundamental charge carriers in organic semiconductors, is key to understanding the charge transport properties of these materials. Recent findings challenge the traditional view of these electronic levels by highlighting the importance of intra‐molecular Coulomb interactions in polarons. Experimental evidence was previously presented for a revised model of the negative polaron in the case of the polymer semiconductor poly(NDI2OD‐T 2 ); there, the addition of an excess electron was seen to lead to the emergence of a singly occupied state within the energy gap of the undoped material and an unoccupied state above the edge of the conduction states . Here, focus is on a small‐molecule semiconductor, C 60 , and spectral evidence is provided of a similar picture for the new states appearing upon polaron formation. Specifically, direct and inverse photoemission spectroscopy is used to investigate the density of states in C 60 films n‐doped with two dimeric dopants. The Coulomb interaction energy (Hubbard U ) of the C 60 anion is experimentally determined to be ≈1.1 eV, a value that aligns closely with theoretical predictions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Localized Flexoelectric Effect Around Ba(CuNb) Nano‐Clusters in Epitaxial BiFeO 3 Films for Enhancement of Electric and Multiferroic Properties

Abstract Room‐temperature (RT) multiferroic materials have received significant research attention for various potential applications; however, their properties are not suitable for real‐world implementation. In this study, a nano‐scale localized flexoelectric effect is introduced to enhance the RT multiferroic performance of epitaxial bismuth iron oxide (BiFeO 3 ; BFO) thin films by embedding 10 mol% Ba(Cu 1/3 Nb 2/3 )O 3 (BCN) nano‐clusters into the host BFO film, which originally has a rhombohedral crystal structure. By utilizing nano‐clustering, a large out‐of‐plane coherent strain is localized around the nano‐clusters, resulting in a highly strained tetragonality of the BFO structure; subsequently, the films exhibit peculiar types of domains and domain walls, such as nano‐scale rotational vortices and antiparallel dipole configurations. These peculiar domain structures, which originate from the localized flexoelectric effect at the nano‐scale, enable excellent ferroelectric, ferromagnetic, and RT multiferroic magnetoelectric coupling. This study reveals that the local variation in the localized flexoelectric field around nano‐clusters considerably impacts the formation of unusual domain‐wall structures. This suggests that the controlled introduction of nano‐clusters with different crystal structures is promising for achieving the desired multiferroic properties.

Song, Hyunseok↗
DOE OSTI2024

Defect Engineering of Bi 2 SeO 2 Thermoelectrics

Abstract Bi 2 SeO 2 is a promising n ‐type semiconductor to pair with p ‐type BiCuSeO in a thermoelectric (TE) device. The TE figure of merit zT and, therefore, the device efficiency must be optimized by tuning the carrier concentration. However, electron concentrations in self‐doped n ‐type Bi 2 SeO 2 span several orders of magnitude, even in samples with the same nominal compositions. Such unsystematic variations in the electron concentration have a thermodynamic origin related to the variations in native defect concentrations. In this study, first‐principles calculations are used to show that the selenium vacancy, which is the source of n ‐type conductivity in Bi 2 SeO 2 , varies by 1–2 orders of magnitude depending on the thermodynamic conditions. It is predicted that the electron concentration can be enhanced by synthesizing under more Se‐poor conditions and/or at higher solid‐state reaction temperatures ( T SSR ), which promote the formation of selenium vacancies without introducing extrinsic dopants. The computational predictions are validated through solid‐state synthesis of Bi 2 SeO 2 . More than two orders of magnitude increase are observed in the electron concentration simply by adjusting the synthesis conditions. Additionally, a significant effect of grain boundary scattering on the electron mobility in Bi 2 SeO 2 is revealed, which can also be controlled by adjusting T SSR . By simultaneously optimizing the electron concentration and mobility, a zT of ≈0.2 is achieved at 773 K for self‐doped n ‐type Bi 2 SeO 2 . The study highlights the need for careful control of thermodynamic growth conditions and demonstrates TE performance improvement by varying synthesis parameters according to thermodynamic guidelines.

Novitskii, Andrei [MANA, National Institute for Ma↗
DOE OSTI2025

Freestanding BaTiO 3 ‐Au Vertically Aligned Nanocomposite toward Flexible Multi‐Sensing Platform

Abstract Flexible and wearable sensors show enormous potential for personalized healthcare devices by real‐time monitoring of an individual's health. Typically, a single functional material is selected for one sensor to sense a particular physical signal while multiple materials will be selected for multi‐mode sensing. Vertically aligned nanocomposites (VANs) have recently demonstrated various material combinations and novel coupled multifunctionalities that are hard to achieve in any single‐phase material alone, including multiphase multiferroics, magneto‐optic coupling, and strong magnetic and optical anisotropy. Integrating these novel VANs into wearable sensors shows enormous potential in multi‐mode sensing owing to their multifunctional nature. In this work, the transfer of VANs onto polydimethylsiloxane as a novel flexible chemical and pressure sensor is demonstrated. For this demonstration, the classical BaTiO 3 ‐Au VAN with combined plasmonic and piezoelectric properties is used to demonstrate a multi‐sensing mechanism. A thin water‐soluble buffer of Sr 3 Al 2 O 6 serves as a buffer layer for the epitaxial growth and transfer process. The electrical output based on the piezoelectric responses and identifying 4‐mercaptobenzoic acid by surface‐enhanced Raman spectroscopy reveal great potential for free‐standing VANs in a wearable multifunctional sensing platform.

Tsai, Benson Kunhung [School of Materials Engineer↗
DOE OSTI2025

Chemo‐Mechanics Interplay Dictates Interface Instability and Asymmetry in Plating and Stripping of Sodium Metal Electrodes

Abstract The development of practical sodium (Na) metal batteries is hindered by key challenges including dendrite growth, dead metal formation, and unstable solid electrolyte interphase (SEI) growth. A fundamental understanding of the chemo‐mechanical interactions at the Na/SEI interface is critical for designing stable Na metal electrodes. In this work, the coupled electrochemical‐mechanical processes governing the morphological evolution and stability of Na metal during plating and stripping are investigated. The heterogeneous nature of transport and morphological interactions at the Na/SEI interface is revealed to result in nonuniform mechanical overpotentials and reaction fronts, eventually leading to Na filaments or pits. The spatio‐temporal evolution of stress heterogeneities during Na plating and stripping is shown to be asymmetric, manifesting in varying morphological nonuniformities and instability modes. The crucial role of external pressure in modulating the electrochemical‐transport interactions, the mechanical response of Na, and the localized reaction currents and stresses at the Na/SEI interface is demonstrated. At different external pressure conditions, the correlation between transport heterogeneities in the SEI and the onset and propagation of interface instability has been delineated. This work highlights the need for synergistic tailoring of external pressure and SEI heterogeneity toward achieving stable electrodeposition and dissolution in Na metal electrodes.

Singla, Aditya [School of Mechanical Engineering P↗