Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACOUSTIC SIMULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Computer Simulation of Electron Thermalization in CsI and CsI(Tl)

A Monte Carlo (MC) model was developed and implemented to simulate the thermalization of electrons in inorganic scintillator materials. The model incorporates electron scattering with both longitudinal optical and acoustic phonons. In this paper, the MC model was applied to simulate electron thermalization in CsI, both pure and doped with a range of thallium concentrations. The inclusion of internal electric fields was shown to increase the fraction of recombined electron-hole pairs and to broaden the thermalization distance and thermalization time distributions. The MC simulations indicate that electron thermalization, following {gamma}-ray excitation, takes place within approximately 10 ps in CsI and that electrons can travel distances up to several hundreds of nanometers. Electron thermalization was studied for a range of incident {gamma}-ray energies using electron-hole pair spatial distributions generated by the MC code NWEGRIM (NorthWest Electron and Gamma Ray Interaction in Matter). These simulations revealed that the partition of thermalized electrons between different species (e.g., recombined with self-trapped holes or trapped at thallium sites) vary with the incident energy. Implications for the phenomenon of nonlinearity in scintillator light yield are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An integrated analytical and experimental study of contact acoustic nonlinearity at rough interfaces of fatigue cracks

This paper presents an analytical model that describes the relationship between interface stiffness and separation of rough interfaces such as fatigue cracks. The contact acoustic nonlinearity at the interface is simulated by a quasi-static model based on Hertzian contact theory. The model is validated using the results of dynamic acoustoelastic testing (DAET) with a Rayleigh wave probe on fatigue cracks in two aluminum alloy samples. One novel aspect of this work is that all the required geometrical parameters for the model are acquired directly from the aperture profile of real cracks extracted from their scanning electron microscopy (SEM) images. Also, the separation of the crack faces during dynamic perturbation is independently measured using a 3D laser Doppler vibrometer (LDV). In addition, using DAET allows for an unprecedented direct comparison between experimental and analytical results. Overall, this is because unlike conventional nonlinear ultrasonic tests that are based on measuring the amplitude of higher harmonics, DAET outputs directly the strain-dependency of transmission and time delay of ultrasonic waves propagating across the interface. The model is found in good qualitative agreement with the experimental results, although the predictions tend to underestimate the variation of transmission coefficient and time delay. We conduct a sensitivity analysis to investigate the influence of different assumptions and simplifications on model predictions.

36 MATERIALS SCIENCE↗

Predicting fault slip via transfer learning

Abstract Data-driven machine-learning for predicting instantaneous and future fault-slip in laboratory experiments has recently progressed markedly, primarily due to large training data sets. In Earth however, earthquake interevent times range from 10’s-100’s of years and geophysical data typically exist for only a portion of an earthquake cycle. Sparse data presents a serious challenge to training machine learning models for predicting fault slip in Earth. Here we describe a transfer learning approach using numerical simulations to train a convolutional encoder-decoder that predicts fault-slip behavior in laboratory experiments. The model learns a mapping between acoustic emission and fault friction histories from numerical simulations, and generalizes to produce accurate predictions of laboratory fault friction. Notably, the predictions improve by further training the model latent space using only a portion of data from a single laboratory earthquake-cycle. The transfer learning results elucidate the potential of using models trained on numerical simulations and fine-tuned with small geophysical data sets for potential applications to faults in Earth.

58 GEOSCIENCES↗

NUMERICAL SIMULATIONS OF CONVERSION TO ALFVEN WAVES IN SUNSPOTS

We study the conversion of fast magnetoacoustic waves to Alfven waves by means of 2.5D numerical simulations in a sunspot-like magnetic configuration. A fast, essentially acoustic, wave of a given frequency and wave number is generated below the surface and propagates upward through the Alfven/acoustic equipartition layer where it splits into upgoing slow (acoustic) and fast (magnetic) waves. The fast wave quickly reflects off the steep Alfven speed gradient, but around and above this reflection height it partially converts to Alfven waves, depending on the local relative inclinations of the background magnetic field and the wavevector. To measure the efficiency of this conversion to Alfven waves we calculate acoustic and magnetic energy fluxes. The particular amplitude and phase relations between the magnetic field and velocity oscillations help us to demonstrate that the waves produced are indeed Alfven waves. We find that the conversion to Alfven waves is particularly important for strongly inclined fields like those existing in sunspot penumbrae. Equally important is the magnetic field orientation with respect to the vertical plane of wave propagation, which we refer to as 'field azimuth'. For a field azimuth less than 90 Degree-Sign the generated Alfven waves continue upward, but above 90 Degree-Sign downgoing Alfven waves are preferentially produced. This yields negative Alfven energy flux for azimuths between 90 Degree-Sign and 180 Degree-Sign . Alfven energy fluxes may be comparable to or exceed acoustic fluxes, depending upon geometry, though computational exigencies limit their magnitude in our simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonlinear co-existence of beta-induced Alfvén eigenmodes and beta-induced Alfvén-acoustic eigenmodes

The nonlinear co-existence of β–induced Alfvén eigenmode (BAE) and β–induced Alfvén-acoustic eigenmode (BAAE) is found in simulations using the gyrokinetic toroidal code, which provides a new mechanism responsible for BAAE excitation in tokamaks. In this work, the normalized pressure β is the ratio between plasma thermal pressure and magnetic pressure. The nonlinear simulation findings show that the BAAE branch emerges after the BAE branch is saturated. The mode structure's evolution shows that existence of BAAE will change the original BAE mode structure. The perturbed distribution functions in the velocity phase space show that a new resonance region manifesting the wave-particle resonance in the BAAE branch appears during the nonlinear co-existence stage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Helmholtz vibrations in bowed strings

We report for almost 160 years, it has been known that Helmholtz oscillations, unique to vibrating strings in bowed instruments (violin, cello, etc.), have two distinct regimes: “slip” and “stick.” During the slip regime, the force at the bow-string interaction is attributed to friction between the sliding bow hair and the vibrating string, with a friction coefficient that decreases with increasing relative velocity. Yet the hair-string interaction during the stick regime is less understood. We propose that the interaction force during the stick regime is proportional to the product of the longitudinal acoustic impedance of the bow hair to the relative bow-string velocity. We validate this hypothesis by solving the string's differential equation of motion, including an enhanced formulation to avoid parasitic high-frequency oscillations. This physical model enables us to analyze, in real time, the characteristics of the Helmholtz oscillations, including the string shape, excitation of harmonics, Schelleng ripples, and string energy, showing that the bowed string gains energy during the stick regime and loses energy during the slip regime.

36 MATERIALS SCIENCE↗

Control for the parameters of a low-pressure glow discharge in argon by means of acoustic flows

The possibility to control the parameters of a low-pressure glow discharge in argon by means acoustic flows is demonstrated by numerical simulations. It is shown that such flows result in an increase in the densities of charged and excited particles in the axial region of the discharge and contraction of the positive column, while stability of the discharge is preserved.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Progress Towards Development of High Temperature Ultrasonic Single Element Transducer

Current work proposes BSPT[(1-x)BiScO{sub 3-x}PbTiO{sub 3}] piezoelectric material for the use till 300 deg. C. Using physics based modeling approach, it has been demonstrated that the amplitude loss due to temperature increase is only 2 dB from room temperature to 300 deg. C. In the present work, the effect of adhesive, nickel face-plate and the backing material acoustic impedance on the dynamic response of the transducer is also discussed. Using the observations from modelling, the development of transducer components is presented with initial experimental data. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Resonant transmission and mode modulation of acoustic waves in H-shaped metallic gratings

In this work, we demonstrate that resonant full transmission of acoustic waves exists in subwavelength H-shaped metallic gratings, and transmission peaks can be efficiently tuned by adjusting the grating geometry. We investigate this phenomenon through both numerical simulations and theoretical calculations based on rigorous-coupled wave analysis. The transmission peaks are originated from Fabry-Perot resonances together with the couplings between the diffractive wave on the surface and the multiple guided modes in the slits. Moreover, the transmission modes can be efficiently tuned by adjusting the cavity geometry, without changing the grating thickness. The mechanism is analyzed based on an equivalent circuit model and verified by both the theoretical calculations and the numerical simulations. This research has potential application in acoustic-device miniaturization over a wide range of wavelengths.

36 MATERIALS SCIENCE↗

Direct Observation of Coherent Longitudinal and Shear Acoustic Phonons in TaAs Using Ultrafast X-Ray Diffraction

Here, using femtosecond time-resolved x-ray diffraction, we investigated optically excited coherent acoustic phonons in the Weyl semimetal TaAs. The low symmetry of the (112) surface probed in our experiment enables the simultaneous excitation of longitudinal and shear acoustic modes, whose dispersion closely matches our simulations. We observed an asymmetry in the spectral line shape of the longitudinal mode that is notably absent from the shear mode, suggesting a time-dependent frequency chirp that is likely driven by photoinduced carrier diffusion. We argue on the basis of symmetry that these acoustic deformations can transiently alter the electronic structure near the Weyl points and support this with model calculations. Our study underscores the benefit of using off-axis crystal orientations when optically exciting acoustic deformations in topological semimetals, allowing one to transiently change their crystal and electronic structures.

36 MATERIALS SCIENCE↗

Analysis of noise radiation mechanisms in hot subsonic jet from a validated large eddy simulation solution

In the framework of jet noise computation, a numerical simulation of a subsonic turbulent hot jet is performed using large-eddy simulation. A geometrical tripping is used in order to trigger the turbulence at the nozzle exit. In a first part, the validity of the simulation is assessed by comparison with experimental measurements. The mean and rms velocity fields show good agreement, so do the azimuthal composition of the near pressure field and the far field spectra. Discrepancies remain close to the nozzle exit which lead to a limited overestimation of the pressure levels in both near and far fields, especially near the 90{sup ∘} angular sector. Two point correlation analyses are then applied to the data obtained from the simulation. These enable to link the downstream acoustic radiation, which is the main direction of radiation, to pressure waves developing in the shear layer and propagating toward the potential core end. The intermittency of the downstream acoustic radiation is evidenced and related to the coherent structures developing in the shear layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A model combustor for studying a reacting jet in an oscillating crossflow

This paper discusses a novel model combustion experiment that was built for studying the structure and dynamics of a reacting jet in an unsteady crossflow. A natural-gas-fired dump combustor is used to generate and sustain an acoustically oscillating vitiated flow that serves as the crossflow for transverse jet injection. Unlike most other techniques that are limited in operating pressure or acoustic amplitude, this method of generating an unsteady flow field is demonstrated at a pressure of 10 atm with peak-to-peak oscillation amplitudes approaching 20% of the mean pressure. An optically accessible test section designed for these conditions provides access for advanced laser and optical diagnostic measurements. Detailed measurements provide insight into the complex acoustic-hydrodynamic-combustion coupling processes and offer high-quality, high-resolution validation data for numerical simulations. Careful instrumentation port design considerations for the higher amplitude acoustics are detailed. As a whole, this paper focuses on select representative segments of the experiment operational space that highlight our strategy of providing an oscillatory flowfield. This includes presenting the acoustic operational space such as acoustic amplitudes, frequencies, and mode shapes. Select imaging results are then reported to support our strategies capability to produce high-fidelity measurements.

47 OTHER INSTRUMENTATION↗

Numerical Simulations of Combustion Instabilities in a Combustor with an Augmentor-Like Geometry

With the goal of assessing the capability of Computational Fluid Dynamics (CFD) to simulate combustion instabilities, the present work considers a premixed, bluff-body-stabilized combustor with well-defined inlet and outlet boundary conditions. The present simulations produce flow behaviors in good qualitative agreement with experimental observations. Notably, the flame flapping and standing acoustic waves seen in the experiments are reproduced by the simulations. Moreover, present predictions for the dominant instability frequency have an error of 7% and those of the rmspressure fluctuations show an error of 16%. In addition, an analysis of simulation results for the limit cycle complements previous experimental analyses by supporting the presence of an active frequency-locking mechanism.

Gonzalez-Juez, Esteban↗

Searching for Baryon Acoustic Oscillations in Intergalactic Absorption: The Expanding Universe

This simulation follows the growth of density perturbations in both gas and dark matter components in a volume 1 billion light years on a side beginning shortly after the Big Bang and evolved to half the present age of the universe. Credits: Science: Michael L. Norman, Robert Harkness, Pascal Paschos, Rick Wagner, San Diego Supercomputer Center/University of California, San Diego Visualization: Mark Hereld, Joseph A. Insley, Michael E. Papka, Argonne National Laboratory; Eric C. Olson, University of Chicago

79 ASTRONOMY AND ASTROPHYSICS↗

Spatio-temporal evolution of magnetosonic wave in the laser plasma interaction

This paper presents a theoretical model for the transient response of nonlinear coupling between magnetosonic wave and ion acoustic wave in the overdense plasma. Filamentation of magnetosonic wave has been considered to be responsible for magnetic turbulence during the laser plasma interaction. The ion acoustic wave gets excited due to the ponderomotive force exerted by magnetosonic wave and this ion acoustic wave in turn generates perturbation in the background density in the form of spatial density harmonics. Numerical simulation has been carried out for dimensionless coupled equations of magnetosonic wave and ion acoustic wave; and the results show quite complex localized structures that grow with time. The power spectrum has also been studied which shows that the spectral index follows an approximate scaling of the order of ∼k{sup −2.4} at smaller scales. The data obtained from numerical simulation are used in semi analytical model to better understand the mechanism of nonlinear evolution of magnetosonic wave. The results indicate considerable randomness in the spatial structure of the magnetic field profile which gives sufficient indication of turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast attenuation of high-frequency acoustic waves in bicontinuous nanoporous gold

We studied the formation and attenuation of GHz elastic waves in free-standing nanoporous gold films by MeV ultrafast electron diffraction and finite element simulations. By tracing the evolution of the high frequency acoustic waves in time domain, we found that the bicontinuous nanoporous structure in nanoporous gold films results in three-dimensionally acoustic response with low coherence, leading to fast attenuation of the elastic waves in comparison with solid gold films. The morphologically dominated dynamics indicates the nanoporosity plays an important role in the high-frequency acoustic energy relaxation, which shines a light on the applications of dealloyed nanoporous materials in nanodevices and sensors as GHz and THz acoustic filters and dampers.

36 MATERIALS SCIENCE↗