SEARCH · Search NASA

Results for “ADAPTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Near-Body Mesh Adaption for Transitional Flows Using OVERFLOW

Accurate modeling of boundary-layer transition is an important aspect of developing greener air transport technologies. In that regard, transition models based on auxiliary transport equations offer a robust approach that is easily integrated into the Reynolds-averaged Navier-Stokes (RANS) solvers. Recent workshops under NATO and AIAA have identified the verification of transport-equations-based transition modeling as a critical aspect of reducing the scatter between the predictions of different CFD codes. Follow-on work has highlighted the need for highly dense grids to achieve an asymptotic convergence of transition related flow metrics. The present work examines the role of automatic near-body mesh adaptation capability in the NASA OVERFLOW CFD solver to enable verification studies in an efficient manner, and for establishing best practices for designing grids for the RANS-based transition models. A sensor function relevant to the Langtry-Menter \gamma-Re_{\theta t}\ transition model has been identified and used for error-based mesh adaptation for canonical configurations comprising a flat plate, and the S809 and NLR-7301 airfoils. The efficacy of the mesh adaptation approach is assessed for flow conditions involving multiple transition scenarios such as natural transition, separation-induced transition, and shock-induced transition. The results from this exploratory study indicate that the meshes adapted using the proposed sensor provide solutions that approach the references solutions obtained with uniformly refined hand-crafted meshes, in terms of the chosen metrics, and yield modest yet significant savings in grid count. We also highlight areas for improvement in the grid adaptation methodology within OVERFLOW.

CFD↗

NASA NTRSDate not supplied

How Eye Drift Adapts to the History of Eye Positions

Oculomotor behavior is a powerful tool to probe brain function and disease. Previous studies have shown how fixational drift velocities depend on eccentricity (Bertolini et al., 2013; Romano et al., 2017) and how fixational drift can adapt after prolonged eccentric fixation (Otero-Millan et al., 2019). Here, eighteen subjects completed two experiments where we measured drift velocity while fixating a briefly flashed target, to remove retinal slip cues. In the first experiment, we measured their baseline relationship between fixational drift velocity and eye position. In the second experiment, we investigated the adaptation of that relationship after prolonged fixation at a very eccentric position. This adaptation usually manifests by the presence of rebound nystagmus (RN) upon returning to central gaze. Our results replicate the finding that drift increases at central fixation in the direction consistent with rebound nystagmus, that is, towards the previously held eccentric position, highlighting that drift velocity depends on the history of eye positions. When examining the entire relationship between drift velocity and eye position we find a mostly linear relationship but with increased slope relative to the baseline condition. However, the adaptation of the integrator cannot be modeled by a simple change in leakiness, as that would not result in increased drift at central gaze. Other mechanisms of adaptation such as shifts in the position or velocity set-points for gaze holding could be present but are indistinguishable with the current data.

eye movement↗

NASA NTRS1974

Star adaptation for two-algorithms used on serial computers

Two representative algorithms used on a serial computer and presently executed on the Control Data Corporation 6000 computer were adapted to execute efficiently on the Control Data STAR-100 computer. Gaussian elimination for the solution of simultaneous linear equations and the Gauss-Legendre quadrature formula for the approximation of an integral are the two algorithms discussed. A description is given of how the programs were adapted for STAR and why these adaptations were necessary to obtain an efficient STAR program. Some points to consider when adapting an algorithm for STAR are discussed. Program listings of the 6000 version coded in 6000 FORTRAN, the adapted STAR version coded in 6000 FORTRAN, and the STAR version coded in STAR FORTRAN are presented in the appendices.

Howser, L. M.↗

NASA NTRS1980

Some problems of human adaptation and ecology under the aspect of general pathology

The main problems of human adaptation at the level of the body and the population in connection with the features of current morbidity of the population and certain demographic processes are analyzed. The concepts of health and adaptation of the individual and human populations are determined. The importance of the anthropo-ecological approach to the investigation of the adaptation process of human populations is demonstrated. Certain features of the etiopathogenesis of diseases are considered in connection with the population-ecological regularities of human adaptation. The importance of research on general pathology aspects of adaptation and the ecology of man for planning, and organization of public health protection is discussed.

Kaznacheyev, V. P.↗

NASA NTRS1983

Adaptive flutter suppression, analysis and test

Methods of adaptive control have been applied to suppress a potentially violent flutter condition of a half-span model of a lightweight figher aircraft. This marked the confluence of several technologies with active flutter suppression, digital control and adaptive control theory the primary contributors. The control algorithm was required to adapt both to slowly varying changes, corresponding to changes in the flight condition or fuel loading and to rapid changes, corresponding to a store release or the transition from a stable to an unstable flight condition. The development of the adaptive control methods was followed by a simulation and checkout of the complete system and a wind tunnel demonstration. As part of the test, a store was released from the model wing tip, transforming the model abruptly from a stable configuration to a violent flutter condition. The adaptive algorithm recognized the unstable nature of the resulting configuration and implemented a stabilizing control law in a fraction of a second. The algorithm was also shown to provide system stability over a range of wind tunnel Mach numbers and dynamic pressures.

Johnson, E. H.↗

NASA NTRS1981

Analytical verification of undesirable properties of direct model reference adaptive control algorithms

The present investigation is concerned with a new method, called 'final approach analysis', which has been developed to analyze the dynamic properties of a class of direct adaptive control algorithms. Particular attention is given to the robustness of these algorithms to a number of aspects. These aspects are related to the generation of high frequencies in the plant control signal, to excessive bandwidth of the adaptive control loop resulting in excitation of unmodeled dynamics, and, consequently, leading to dynamic instability of the closed-loop adaptive system, and, thirdly, to noise corrupted measurements. The final approach analysis is useful because it can be used in a constructive way to adjust the adaptive gains so as to limit the closed-loop system bandwidth and to ameliorate some of the undesirable characteristics of existing adaptive algorithms.

Rohrs, C. E.↗

NASA NTRS1986

Adaptive filtering of biodynamic stick feedthrough in manipulation tasks on board moving platforms

A novel approach to suppress the effects of biodynamic interference is presented. An adaptive noise canceling technique is employed for substracting the platform motion correlated components from the control stick output. The effects of biodynamic interference and its suppression by adaptive noise cancellation has been evaluated in a series of tracking tasks performed in a moving base simulator. Simulator motions were in pitch, roll and combined pitch and roll. Human operator performance was assessed from the mean square values of the tracking error and the control activity. The tracking error and the total stick output signal were found to increase significantly with motion and to diminish substantially with adaptive noise cancellation, thus providing a considerable improvement in tracking performance under conditions in which platform motion were present. The adaptive filter was found to cause a significant increase in the cross-over frequency and decrease in the phase margin. Moreover, the adaptive filter was found to significantly improve the human operator visual motor response. This improvement is manifested as an increased human operator gain, a smaller time delay and lower pilot workload.

Velger, M.↗

NASA NTRS1987

Procedures for Computing Transonic Flows for Control of Adaptive Wind Tunnels

Numerical methods are developed for control of three dimensional adaptive test sections. The physical properties of the design problem occurring in the external field computation are analyzed, and a design procedure suited for solution of the problem is worked out. To do this, the desired wall shape is determined by stepwise modification of an initial contour. The necessary changes in geometry are determined with the aid of a panel procedure, or, with incident flow near the sonic range, with a transonic small perturbation (TSP) procedure. The designed wall shape, together with the wall deflections set during the tunnel run, are the input to a newly derived one-step formula which immediately yields the adapted wall contour. This is particularly important since the classical iterative adaptation scheme is shown to converge poorly for 3D flows. Experimental results obtained in the adaptive test section with eight flexible walls are presented to demonstrate the potential of the procedure. Finally, a method is described to minimize wall interference in 3D flows by adapting only the top and bottom wind tunnel walls.

Rebstock, Rainer↗

NASA NTRS1987

SMI adaptive antenna arrays for weak interfering signals

The performance of adaptive antenna arrays is studied when a sample matrix inversion (SMI) algorithm is used to control array weights. It is shown that conventional SMI adaptive antennas, like other adaptive antennas, are unable to suppress weak interfering signals (below thermal noise) encountered in broadcasting satellite communication systems. To overcome this problem, the SMI algorithm is modified. In the modified algorithm, the covariance matrix is modified such that the effect of thermal noise on the weights of the adaptive array is reduced. Thus, the weights are dictated by relatively weak coherent signals. It is shown that the modified algorithm provides the desired interference protection. The use of defocused feeds as auxiliary elements of an SMI adaptive array is also discussed.

Gupta, I. J.↗

NASA NTRS1987

Adaptive control for flexible space structures with measurement noise

Simulation results are presented to address the problem of measurement noise in the design of adaptive controllers for large flexible space structures. In order to reduce the unrealistically high overall control demand resulting from the presence of leakage terms, a method has been developed for the introduction of noise filters into the adaptive controller while at the same time ensuring the global stability of the adaptive algorithm. A branch filter allows filtering of the output error without introducing phase lag into the adaptive loop. The technique is demonstrated in the simulation of an adaptive payload articulation control for a Space Station model.

Bayard, David S.↗

NASA NTRS1987

Adaptive control of robotic manipulators

The author presents a novel approach to adaptive control of manipulators to achieve trajectory tracking by the joint angles. The central concept in this approach is the utilization of the manipulator inverse as a feedforward controller. The desired trajectory is applied as an input to the feedforward controller which behaves as the inverse of the manipulator at any operating point; the controller output is used as the driving torque for the manipulator. The controller gains are then updated by an adaptation algorithm derived from MRAC (model reference adaptive control) theory to cope with variations in the manipulator inverse due to changes of the operating point. An adaptive feedback controller and an auxiliary signal are also used to enhance closed-loop stability and to achieve faster adaptation. The proposed control scheme is computationally fast and does not require a priori knowledge of the complex dynamic model or the parameter values of the manipulator or the payload.

Seraji, H.↗

NASA NTRS1987

An adaptive Cartesian control scheme for manipulators

A adaptive control scheme for direct control of manipulator end-effectors to achieve trajectory tracking in Cartesian space is developed. The control structure is obtained from linear multivariable theory and is composed of simple feedforward and feedback controllers and an auxiliary input. The direct adaptation laws are derived from model reference adaptive control theory and are not based on parameter estimation of the robot model. The utilization of feedforward control and the inclusion of auxiliary input are novel features of the present scheme and result in improved dynamic performance over existing adaptive control schemes. The adaptive controller does not require the complex mathematical model of the robot dynamics or any knowledge of the robot parameters or the payload, and is computationally fast for online implementation with high sampling rates.

Seraji, H.↗

NASA NTRS1990

Adaptive quadrilateral and triangular finite-element scheme for compressible flows

The development of an adaptive mesh refinement procedure for analyzing high-speed compressible flows using the finite-element method is described. This new adaptation procedure, which uses both quadrilateral and triangular elements, was implemented with two explicit finite-element algorithms - the two-step Taylor-Galerkin and the multistep Galerkin-Runge-Kutta schemes. A von Neumann stability analysis and a rotating 'cosine hill'problem demonstrate the instability of the Taylor-Galerkin scheme when coupled with the adaptation procedure. For the same adaptive refinement scheme, the Galerkin-Runge-Kutta procedure yields stable solutions within its explicit stability limit. The utility of this new adaptation procedure for the prediction of compressible flow features is illustrated for inviscid problems involving strong shock interactions at hypersonic speeds.

Ramakrishnan, R.↗

NASA NTRS1990

A three-dimensional dynamic solution-adaptive mesh algorithm

A solution-adaptive grid algorithm has been developed for use in two and three dimensions. The algorithm uses a transformation from the cartesian coordinate system to a general coordinate space, which will be defined as a parallelepiped. A weighting function for adaption of the grid is developed that will allow adaption to the gradients of any combination of dependent variables in the flow. The adaption is carried out in the parametric space and a simple inverse mapping to return the new parametric space to the physical space is derived. The concept used to relocate the grid-points in the parametric space is based on the center of mass of distributed weights. Solution-adaptive results are presented for various laminar flows in two dimensions and for mathematical weighting functions in three dimensions.

Benson, Rusty A.↗

NASA NTRS1990

Adaptive truss structure

This paper discusses the research in adaptive structures conducted at NASA Langley Research Center. The objective in the research program on adaptive truss structures is to develop an integrated approach for the design, test, and evaluation of adaptive trusses. An adaptive structure must include sensors for measuring some of the states of the mechanism, a controller that processes the sensor information and generates command signals, and a device that will cause the struts in the mechanism to change length. Based on the results of the research program, it is concluded that alternative designs for future space applications are offered, and adaptive truss has been demonstrated to be effective for vibration suppression.

Horner, C. G.↗

NASA NTRS1991

Experimental study of adaptive pointing and tracking for large flexible space structures

This paper describes an experimental study of adaptive pointing and tracking control for flexible spacecraft conducted on a complex ground experiment facility. The algorithm used in this study is based on a multivariable direct model reference adaptive control law. Several experimental validation studies were performed earlier using this algorithm for vibration damping and robust regulation, with excellent results. The current work extends previous studies by addressing the pointing and tracking problem. As is consistent with an adaptive control framework, the plant is assumed to be poorly known to the extent that only system level knowledge of its dynamics is available. Explicit bounds on the steady-state pointing error are derived as functions of the adaptive controller design parameters. It is shown that good tracking performance can be achieved in an experimental setting by adjusting adaptive controller design weightings according to the guidelines indicated by the analytical expressions for the error.

Boussalis, D.↗

NASA NTRS1992

Joint Japan/U.S. Conference on Adaptive Structures, 2nd, Nagoya, Japan, Nov. 12-14, 1991, Collection of Papers

The present conference discusses the development status of adaptive structures in Europe and in Japan, the 'Cosmo-Lab' structures/robotics cooperation concept, active-adhesion concepts for in-orbit structural assembly, adaptively controlled truss structures, object-oriented modeling in structural analysis, the control effectiveness and energy efficiency of an active mass damper, a space truss with experimental tendon control, and piezoelectric actuator-based space trusses. Also discussed is the control of resonant frequencies in adaptive structures through prestressing, active control of vortex-excited vibrations of flexible cylindrical structures, shape adjustment of a flexible space antenna reflector, the SDIO Adaptive Structures Program, optimal trajectories of iterative manipulation for space robots, a docking device as an adaptive structure, shape-memory polymers and their hybrid composites, and fuzzy control methods for structural dynamics.

Matsuzaki, Yuji↗

NASA NTRS1991

Adaptive snakes - Control of damping and material parameters

The stability of active contour models or 'snakes' is studied. It is shown that the modification of snake parameters using adaptive systems improves both the stability of the snakes and the boundaries obtained. The adaptive snakes perform better with images of varying contrasts, noisy images and images with different curvatures along the boundaries. The computational costs at each iteration for the adaptive snakes is still of order N, where N is the number of points on the snakes. Comparisons of the results for non-adaptive and adaptive snakes are shown using both computer simulations and satellite images.

Samadani, Ramin↗