Search NASA⌕ Search

SEARCH · Search NASA

Results for “ADIABATIC PROCESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Buffering of stratospheric circulation by changing amounts of tropical ozone - A Pinatubo case study

Stratospheric aerosol from Mount Pinatubo heated the tropical lower stratosphere by about 0.3 K/day mainly due to absorption of terrestrial infrared radiation. This heating was dissipated by: (1) an observed increase in stratospheric temperatures, which enhanced the radiation cooling; (2) additional mean upward motion, observed for the aerosol cloud, which led to adiabatic cooling; and (3) reductions in ozone concentrations resulting from enhanced upward motions. Each of these processes operated on a different time scale: maximum temperatures were observed after about 90 days; maximum ozone losses of about -1.5 ppm occurred after 140 days when the enhanced vertical velocities effectively lifted the ozone profile by about 2 km. We believe this shows that ozone plays an important role in buffering vertical motion in the tropical lower stratosphere, and hence the residual Brewer Dobson circulation of the whole stratosphere.

Kinne, S.↗
DOE OSTI2018

Highly efficient combustion with low excess air in a modern energy-from-waste (EfW) plant

Highlights: • Operation of a commercial EfW plant with low excess air. • Uncontrolled NOx emissions are considerably reduced by lowering O{sub 2} in the combustion process. • Stable combustion control avoids CO formation even at O{sub 2} concentrations below 3 vol%. • High adiabatic combustion temperatures do not increase the amount of uncontrolled NOx. - Abstract: The effect of low excess air and high adiabatic combustion temperatures on CO and NOx formation has been investigated on a commercially operated energy-from-waste plant. With optimal combination of low O{sub 2} levels and stable combustion control, uncontrolled NOx levels could be lowered to 100–150 mg/Nm{sup 3} (dry, at 11% O{sub 2}) while keeping CO emissions at low levels. Even at adiabatic temperatures above 1400 °C thermal NOx hardly contributed to the total NOx emissions in a grate-fired EfW plant. An advanced combustion control system allowed continuous operation with very little excess air (λ < 1.2) while keeping CO and NOx at levels well below the legal emission limits.

09 BIOMASS FUELS↗
DOE OSTI2022

A case study of using x-ray Thomson scattering to diagnose the in-flight plasma conditions of DT cryogenic implosions

The design of inertial confinement fusion ignition targets requires radiation-hydrodynamics simulations with accurate models of the fundamental material properties (i.e., equation of state, opacity, and conductivity). Validation of these models is required via experimentation. A feasibility study of using spatially integrated, spectrally resolved, x-ray Thomson scattering measurements to diagnose the temperature, density, and ionization of the compressed DT shell of a cryogenic DT implosion at two-thirds convergence was conducted. Synthetic scattering spectra were generated using 1D implosion simulations from the LILAC code that were post processed with the x-ray scattering model, which is incorporated within SPECT3D. Analysis of two extreme adiabat capsule conditions showed that the plasma conditions for both compressed DT shells could be resolved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

A Polytropic Approximation of Compressible Flow in Pipes With Friction

This paper demonstrates the usefulness of treating subsonic Fanno flow (adiabatic flow, with friction, of a perfect gas in a constant-area pipe) as a polytropic process. It is shown that the polytropic model allows an explicit equation for mass flow rate to be developed. The concept of the energy transfer ratio is used to develop a close approximation to the polytropic index. Explicit equations for mass flow rate and net expansion factor in terms of upstream properties and pressure ratio are developed for Fanno and isothermal flows. An approximation for choked flow is also presented. Here, the deviation of the results of this polytropic approximation from the values obtained from a traditional gas dynamics analysis of subsonic Fanno flow is quantified and discussed, and a typical design engineering problem is analyzed using the new method.

42 ENGINEERING↗
DOE OSTI2025

New Methods for Predicting Non-Born-Oppenheimer Chemistry

Current methods for modeling non-adiabatic molecular dynamics face fundamental limitations when treating geometric phase effects: quantum mechanical phenomena where nuclear wavepackets acquire phase shifts when encircling conical intersections. Existing approaches either neglect these effects entirely or rely on potential energy surfaces arising from the Born-Oppenheimer approximation, which introduce artificial singularities and can overestimate geometric phase contributions. This project developed a new theoretical framework based on exact factorization (XF) methods to overcome these limitations. We derived mathematical formulations for hybrid quantum-classical XF dynamics that selectively treat critical nuclear degrees of freedom quantum mechanically while propagating others classically. This approach addresses the computational intractability that has previously limited exact methods to toy systems. Key innovations include a new approach to systematically identifying nuclear coordinates requiring quantum treatment, as well as novel implementation strategies that interface with existing quantum chemistry codes. The project also developed a proof-of-concept code for treating Jahn-Teller systems and creation of educational materials on non-adiabatic dynamics geared at the graduate level. The theoretical framework developed will enable future systematically improvable calculations of nuclear quantum effects in realistic molecular systems, filling a critical gap in non-adiabatic dynamics methods. This foundation supports future development of predictive tools for designing energy-relevant photochemical processes where quantum coherence effects may be exploited to control reaction outcomes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
NASA NTRS1983

Fast magnetospheric echoes of energetic electron beams

Electron beam experiments using rocket-borne instrumentation confirmed earlier observations of fast magnetospheric echoes of artificially injected energetic electrons. A total of 234 echoes were observed in a pitch angle range from 9 to 110 deg at energies of 1.87 and 3.90 keV. Of these, 102 echoes could unambiguously be identified with known accelerator operations at 2, 4 or 8 keV energy and highest current levels resulting in the determination of transit times of typically 300 to 400 ms. In most cases, when echoes were present in both energy channels, the higher energy electrons led the lower energy ones by 50 to 70 ms. Adiabatic theory applied to these observations yields a reflection height of 3000 to 4000 km. The injection process is discussed as the strong beam-plasma interaction that occurred near the electron accelerator appears to be instrumental in generating the source of heated electrons required for successful echo detection.

Wilhelm, K.↗
NASA NTRS1979

Release adiabat measurements on minerals: The effect of viscosity

The current inversion of pressure-particle velocity data for release from a high pressure shock state to a pressure-density path is analyzed. It is assumed that the release process is isentropic. It was shown that for geological materials below stresses of 150 GPa, the effective viscosity must be 1000 kg/m/s in order that the viscous (irreversible) work carried out on the material in the shock state remains small compared to the mechanical work recovered upon adiabatic rarefaction. The available data pertaining to the offset of the Rayleigh line from the Hugoniot for minerals, the magnitude of the shear stress in the high pressure shock state for minerals, and the direct measurements of the viscosities of several engineering materials shocked to pressures below 150 GPa yield effective viscosities of 1000 kg/m/s or less. An inferance that this indicates that the conditions for isentropic release of minerals from shock states are achieved, and a conclusion that the application of the Riemann integral to obtain pressure-density states along the release adiabats of minerals in shock experiments is valid are made.

Jeanloz, R.↗
DOE OSTI2020

The “Hole” Story in Ionized Water from the Perspective of Ehrenfest Dynamics

The radiolysis of liquid water and the radiation-matter interactions that happen in aqueous environments are important to the elds of chemistry, materials, and environmental sciences, as well as biological and physiological response to extreme conditions and medical treatments. The initial stage of radiolysis is the ultrafast response, or hole dynamics, that trigger chemical processes within complex energetic landscapes that may include reactivity. A fundamental understanding necessitates the use of theoretical methods that are capable of simulating both ultrafast coherence and non-adiabatic energy transfer pathways. In this work, we carry out an ab initio Ehrenfest dynamic study in order to provide a more complete description of the ultrafast dynamics and reactive events initiated by photoionization of water. Furthermore, after sudden ionization, the range of processes that include hole trapping and transfer, large OH oscillations, proton transfer and subsequent relay, formation of the metastable Zundel complex, and long-lived coherence, are identied and new insight into their driving forces are elucidated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1997

Nonguiding Center Motion and Substorm Effects in the Magnetotail

Thick and thin models of the middle magnetotail were developed using a consistent orbit tracing technique. It was found that currents carried near the equator by groups of ions with anisotropic distribution functions are not well approximated by the guiding center expressions. The guiding center equations fail primarily because the calculated pressure tensor is not magnetic field aligned. The pressure tensor becomes field aligned as one moves away from the equator, but here there is a small region in which the guiding center equations remain inadequate because the two perpendicular components of the pressure tensor are unequal. The significance of nonguiding center motion to substorm processes then was examined. One mechanism that may disrupt a thin cross-tail current sheet involves field changes that cause ions to begin following chaotic orbits. The lowest-altitude chaotic region, characterized by an adiabaticity parameter kappa approx. equal to 0.8, is especially important. The average cross-tail particle drift is slow, and we were unable to generate a thin current sheet using such ions. Therefore, any process that tends to create a thin current sheet in a region with kappa approaching 0.8 may cause the cross-tail current to get so low that it becomes insufficient to support the lobes. A different limit may be important in resonant orbit regions of a thin current sheet because particles reach a maximum cross-tail drift velocity. If the number of ions per unit length decreases as the tail is stretched, this part of the plasma sheet also may become unable to carry the cross-tail current needed to support the lobes. Thin sheets are needed for both resonant and chaotic orbit mechanisms because the distribution function must be highly structured. A description of current continuity is included to show how field aligned currents can evolve during the transition from a two-dimensional (2-D) to a 3-D configuration.

Kaufmann, Richard L.↗
DOE OSTI2025

Adiabatic and radiative cooling are both important causes of aerosol activation in simulated fog events in Europe

Aerosol–fog interactions affect the visibility in, and life cycle of, fog and are difficult to represent in weather and climate models. Here we explore processes that impact the simulation of fog droplet number concentrations (N d ) at sub-kilometer scale horizontal grid resolutions in the UK Met Office Unified Model. We modify the parameterization of aerosol activation to include droplet activation by radiative cooling in addition to adiabatic cooling and determine the relative importance of the two cooling mechanisms. We further test the sensitivity of simulated N d to: (a) interception of droplets by trees and buildings, (b) overestimation of updrafts in temperature inversions (which leads to artificially high N d values), and (c) potential mechanisms for droplet deactivation due to downward fluctuations in supersaturation. We evaluate our model against observations from the ParisFog and LANFEX field campaigns, building on evaluation described in the companion paper. Including radiative cooling in the activation mechanism improves how accurately we represent the liquid water path and the vertical structure of the fog in our LANFEX case study. However, with radiative cooling, the N d are overestimated for most of the ParisFog cases and for the LANFEX case. The time-averaged overestimate exceeds a factor of three (the normalized mean bias factor exceeds 2.0) in 4 out of 11 ParisFog cases. Our sensitivity studies demonstrate how these overestimates can be mitigated. Assuming the overestimate affects both radiative and adiabatic cooling, we find that although radiative cooling is more often the dominant source, both cooling sources can sometimes dominate activation.

Ghosh, Pratapaditya [Carnegie Mellon University, P↗
DOE OSTI2018

Deformation Mechanisms and Formability Window for As-Cast Mg-6Al-2Ca-1Sn-0.3Sr Alloy (MRI 230D)

The hot deformation characteristics of MRI 230D alloy have been evaluated in the temperature range 260-500 °C and strain rate range 0.0003-10 s{sup −1}, on the basis of processing map. The processing map exhibited two domains in the ranges: (1) 300-370 °C and 0.0003-0.001 s{sup −1} and (2) 370-480 °C and 0.0003-0.1 s{sup −1}. Dynamic recrystallization occurs in the both domains with basal slip dominating in the first domain along with climb as recovery process and second-order pyramidal slip dominating in the second with the recovery by cross-slip. In Domains (1) and (2), the apparent activation energy values estimated using the kinetic rate equation are 143 and 206 kJ/mole, respectively, the first one being close to that for lattice self-diffusion confirming climb. It is recommended that the alloy is best processed at 450 °C and strain rates less than 0.1 s{sup −1}, where non-basal slip and cross-slip occur extensively to impart excellent workability. The alloy exhibits flow instability in the form of adiabatic shear band formation and flow localization at lower temperatures and higher strain rates. Forging of a cup-shaped component was performed under various conditions, and the results validated the predictions of the processing map on the workability domains as well as the instability regimes.

36 MATERIALS SCIENCE↗
NASA NTRS1966

Source of outer zone protons.

Acceleration processes of outer zone protons investigated, using Kellogg hypothesis of radiation belt formation through magnetic disturbances where third adiabatic invariant is violated

OUTER RADIATION BELT↗
NASA NTRS1972

Model development of supersonic trough wind with shocks

The time dependent one dimensional hydrodynamic equations describe the evolution of the thermal plasma flow along closed magnetic field lines outside of the plasmasphere. The convection of the supersonic polar wind onto a closed fieldline results in the assumed formation of collisionless plasma shocks. These shocks move earthward as the field line with its frozen-in plasma remains fixed or contracts with time to smaller L coordinates. The high equatorial plasma temperature (of the order of electron volts) produced by the shock process decreases with time if the flow is isothermal but it will increase if the contraction is under adiabatic conditions. Assuming adiabaticity a peak in the temperature forms at the equator in conjunction with a depression in the ion density. After an initial contraction, if the flux tube drifts to higher L coordinates the direction of the shock motion can be reversed so that the supersonic region will expand along the field line towards the state characterizing the supersonic polar wind. A rapid expansion will lower the equatorial density while the temperature decreases with time under adiabatic but not isothermal conditions.

Grebowsky, J. M.↗
NASA NTRS1972

Model development of supersonic trough wind with shocks.

The time-dependent one dimensional hydrodynamic equations describe the evolution of the thermal plasma flow along closed magnetic field lines outside of the plasmasphere. The convection of the supersonic polar wind onto a closed field line results in the assumed formation of collisionless plasma shocks. These shocks move earthward as the field line with its 'frozen-in' plasma remains fixed or contracts with time to smaller L coordinates. The high equatorial plasma temperature (of the order of electron volts) produced by the shock process decreases with time if the flow is isothermal, but it will increase if the contraction is under adiabatic conditions. Assuming adiabaticity a peak in the temperature forms at the equator in conjunction with a depression in the ion density. After an initial contraction, if the flux tube drifts to higher L coordinates, the direction of the shock motion can be reversed so that the supersonic region will expand along the field line toward the state characterizing the supersonic polar wind.

Grebowsky, J. M.↗
NASA NTRS1979

Molecular collision processes in the presence of picosecond laser pulses

Radiative transitions in molecular collision processes taking place in the presence of picosecond pulses are studied within a semiclassical formalism. An expression for adiabatic potential surfaces in the electronic-field representation is obtained, which directly leads to the evaluation of transition probabilities. Calculations with a Landau-Zener-type model indicate that picosecond pulses can be much more effective in inducing transitions than a single long pulse of the same intensity and the same total energy, if the intensity is sufficiently high that the perturbation treatment is not valid.

Lee, H. W.↗
NASA NTRS1990

Air motions accompanying the development of a planetary wave critical layer

The horizontal air motions accompanying the development of a planetary wave critical layer are presently investigated on the sphere, in terms of wave amplitude, the characteristics of the zonal flow, and dissipation. While attention is given to adiabatic motions, which should furnish an upper bound on the redistribution of conserved quantities by eddy stirring, nonconservative processes may be important in determining how large a role eddy stirring actually plays in the redistribution of atmospheric constituents. Nonconservative processes may also influence tracer distributions by directly affecting dynamics.

Salby, Murry L.↗
DOE OSTI2016

Studies of magnetocaloric effect on spin-1/2 J{sub 1}-J{sub 2} Heisenberg hexagons

Magnetocaloric effect of four different spin-1/2 J{sub 1}-J{sub 2} Heisenberg hexagons has been studied in terms of adiabatic demagnetization. Four hexagons with different combinations of antiferromagnetic and ferromagnetic Heisenberg exchange interactions are considered. Level of frustration on those models is different. Studies on the magnetization process, nature of isentrops and properties of magnetocaloric effect have been carried out. Comparison of results on those models has been discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Exploring Plasma Heating in the Current Sheet Region in a Three-dimensional Coronal Mass Ejection Simulation

We simulate a coronal mass ejection using a three-dimensional magnetohydrodynamic code that includes coronal heating, thermal conduction, and radiative cooling in the energy equation. The magnetic flux distribution at 1 Rs is produced by a localized subsurface dipole superimposed on a global dipole field, mimicking the presence of an active region within the global corona. Transverse electric fields are applied near the polarity inversion line to introduce a transverse magnetic field, followed by the imposition of a converging flow to form and destabilize a flux rope, producing an eruption. We examine the quantities responsible for plasma heating and cooling during the eruption, including thermal conduction, radiation, adiabatic effects, coronal heating, and ohmic heating. We find that ohmic heating is an important contributor to hot temperatures in the current sheet region early in the eruption, but in the late phase, adiabatic compression plays an important role in heating the plasma there. Thermal conduction also plays an important role in the transport of thermal energy away from the current sheet region throughout the reconnection process, producing a “thermal halo” and widening the region of high temperatures. We simulate emission from solar telescopes for this eruption and find that there is evidence for emission from heated plasma above the flare loops late in the eruption, when the adiabatic heating is the dominant heating term. These results provide an explanation for hot supra-arcade plasma sheets that are often observed in X-rays and extreme ultraviolet wavelengths during the decay phase of large flares.

79 ASTRONOMY AND ASTROPHYSICS↗