Results for “AE” — Page 13

DOE OSTI2022

The Fracture Toughness of Nuclear Graphite Grades, Revision 1

New measurements of graphite mode I critical stress intensity factor, K Ic (commonly referred to as the fracture toughness) and the mode II critical shear stress intensity, K IIc , are reported and compared with prior data for K Ic and K IIc . The new data are for graphite grades PCEA, IG-110 and 2114. Variations of K Ic and acoustic emission (AE) data with graphite texture are reported and discussed. The Codes and Standards applications of fracture toughness, K Ic , data are also discussed. A specified minimum value for nuclear graphite K Ic is recommended.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2023

Geomagnetic Storm Effects on Ionospheric Irregularities: Insights from SuperDARN, Madrigal GPS TEC, and ISR Data [Slides]

Geomagnetic disturbances trigger an influx of electrons from the magnetosphere, leading to an increase electron density (even in lower altitudes), amplified ionospheric currents, and subsequently, increased conductance. A surge in the AE index, indicating heightened auroral currents, correlates with a rise in precipitated charged particles, including electrons, into the polar ionosphere. This correlation is detectable through increased parameter values measured by SuperDARN. The downward flow of electron density towards lower altitudes, as observed in PFISR data, potentially obstructs the transmission frequency from radar stations passing through the PFISR location (just like we saw in the KOD station). During the geomagnetic storm, there is increased backscatter power (increased amount of ionospheric irregularities), and the plasma flow draws closer to the radar, suggesting a possible southward shift in the auroral oval as a result of the heightened auroral activity. Increased geomagnetic activity correlates with an elevation in average TEC and induces the occurrence of SED (Storm Enhanced Density).

58 GEOSCIENCES↗

DOE OSTI2023

Preserving Superconvergence of Spectral Elements for Curved Domains via $h$ and $p$-Geometric Refinement

Spectral element methods (SEM), extensions of finite element methods (FEM), have emerged as significant techniques for solving partial differential equations in physics and engineering. SEM can potentially deliver superior accuracy due to the potential superconvergence in nodal solutions for well-shaped tensor-product elements. However, the accuracy of SEM often degrades in complex geometries due to geometric inaccuracies near curved boundaries and the loss of superconvergence with simplicial or non-tensor-product elements. To overcome the first issue, we propose using h- and p-geometric refinement, which refines the mesh near high-curvature regions and increases the degree of geometric basis functions, respectively. We show that when using mixed-element meshes with tensor-product elements in the interior of the domain, curvature-based geometric refinement near boundaries can improve the accuracy of the interior elements by reducing pollution errors and preserving the superconvergence in nodal solutions. To address the second issue, we introduce a post-processing technique using the adaptive extended stencil finite element method (AES-FEM) to recover the accuracy near the curved boundaries. The combination of curvature-based geometric refinement and accurate post-processing offers an effective and easier-to-implement alternative to methods reliant on exact geometries. We demonstrate our techniques by solving the convection-diffusion equation in 2D and show up to two orders of magnitude of improvement in the solution accuracy, even when the elements are poorly shaped near boundaries.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Preserving Superconvergence of Spectral Elements for Curved Domains

Spectral element methods (SEM), extensions of finite element methods (FEM), have emerged as significant techniques for solving partial differential equations in physics and engineering. SEM can potentially deliver superior accuracy due to the potential superconvergence in nodal solutions for well-shaped tensor-product elements. However, the accuracy of SEM often degrades in complex geometries due to geometric inaccuracies near curved boundaries and the loss of superconvergence with simplicial or non-tensor-product elements. To overcome the first issue, we propose using geometric refinement, which both refines the mesh near high-curvature regions and increases the degree of geometric basis functions. We show that when using mixed-element meshes with tensor-product elements in the interior of the domain, curvature-based geometric refinement near boundaries can improve the accuracy of the interior elements by reducing pollution errors and preserving the superconvergence in nodal solutions. To address the second issue, we introduce ApSEM, a post-processing technique using the adaptive extended stencil finite element method (AES-FEM) to recover the accuracy near the curved boundaries. The combination of curvature-based geometric refinement and accurate post-processing offers an effective and easier-to-implement alternative to methods reliant on exact geometries. We demonstrate our techniques by solving the convection-diffusion equation in 2D and 3D and show up to two orders of magnitude of improvement in the solution accuracy, even when the elements are poorly shaped near boundaries. We also show the efficiency of ApSEM as it can recover superconvergence in nodal solutions without drastically increasing the computational cost.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Plasma Focused Ion Beam Nanothermometry

In this report we detail demonstration of temperature dependent effects on grayscale intensity imaged in Focused Ion Beam (FIB) microscope, as well as secondary electron (SE) dependence on temperature in the Auger Electron Spectroscopy (AES) and a Scanning Electron Microscope (SEM). In each instrument an intrinsic silicon sample is imaged at multiple temperatures over the course of each experiment. The grayscale intensity is shown to scale with sample temperature. Sample preparation procedures are discussed, along with hypothesized explanations for unsuccessful trials. Anticipated outcomes and future directions for these measurements are also detailed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2025

Characterization of Tank 9H Annulus Sample in Support of Residual Material Inventory Determinations

The Savannah River National Laboratory (SRNL) was requested by Savannah River Mission Completion (SRMC) to provide sample preparation and characterization of the Tank 9H annulus sample in support of Residual Material Inventory Determinations. One Tank 9H sample in three vials [HTF-9-25-13, HTF-9-25-14 and HTF-9-25-15], with each vial containing approximately 200 mL of the Tank 9H annulus salt solution, were delivered to the SRNL Shielded Cells for sample preparation and characterizations in February 2025. The density of the “as-received” solution contained in each of the three Tank 9H annulus sample vials were determined followed by a solid-liquid separation on each one using 0.45-micron Nalgene® nylon filter membranes. The resulting filtrates were combined to form the Tank 9H annulus sample with a total volume of about 600 mL. The combined wet solid fractions, about a total of 4.8 grams of salt material, remaining on the filter membranes were air-dried in the Shielded Cells for 72 hours. The total weight of the air-dried solids was 2.1 grams. These air-dried solids were washed with deionized water (DI water) at a phase ratio of 60 mL DI water/gram of solids to recover insoluble solids, if any. No visible or measurable quantity of insoluble solids were recovered after DI water washing of the air-dried solids because the air-dried solids completely dissolved in the DI water. The solid fraction-wash water was not combined with the 600 mL of the filtrate solution, and the resulting solution was not screened or analyzed for radionuclides. Aliquot sample volumes of the undiluted Tank 9H annulus sample were sent to the SRNL analytical services groups for radionuclides, elementals, anions and total mercury analysis by various methods including radiochemical separations/counting methods, inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) and special preparations. All sample analyses were performed in triplicate. This report presents the analytical characterization results for the Tank 9H annulus sample. The results are also reported where analytical methods yielded additional analytes, other than those requested by SRMC. In the characterization of the Tank 9H annulus sample, the detection limits for all the analytes, as specified in the Technical Task Request (TTR) and Task Technical and Quality Assurance Plan (TTQAP), were met.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

KBase Narrative - Porphyromonadaceae sp. W3.11 genome

Narratives for The phenotype and genotype of fermentative prokaryotes This is the Narrative for Porphyromonadaceae sp. W3.11. A complementary Narrative for Lachnospiraceae sp. C1.1 is available here. This is the Narrative for Lachnospiraceae sp. C1.1. A complementary Narrative for Porphyromonadaceae sp. W3.11 is available here. Background and Isolation This Narrative and its complementary Narrative contain assembly and annotation of two bacterial isolates that were isolated by our laboratory from the rumen of a Holstein heifer. All procedures with animals have been approved by University of California Davis’s Institutional Animal Care and Use Committee. Rumen contents were collected through a rumen fistula and strained through two layers of cheesecloth into a bottle. The bottle was sealed to exclude air and maintained at 39°C. Contents were brought to the laboratory and bubbled under O2-free CO2 within 15 min. At the laboratory, serial dilutions were made with anaerobic dilution solution for Lachnospiraceae sp. C1.1 and propionibacterium diluent for Porphyromonadaceae sp. W3.11 (table S2). Aliquots (0.1 ml) of each dilution were injected into anaerobic bottle plates (1) containing 9 ml of LH medium (table S2). After incubation at 37°C for 7 days, isolated colonies were picked. Lachnospiraceae sp. C1.1 was picked from a bottle inoculated with a 104 dilution of rumen contents, and Porphyromonadaceae sp. W3.11 was picked from a bottle inoculated with a 103 dilution. After initial isolation, these organisms were purified by growing on anaerobic roll tubes (2) and picking isolated colonies. We performed de novo sequencing of Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11. Aliquots of liquid culture (9 and 1.5 ml, respectively) were collected by syringe and centrifuged (21,000g for 10 min at 4°C). Cell pellets were submitted to Molecular Research LP for DNA extraction, library preparation, and sequencing. After resuspending pellets in 180 µl of ATL buffer (Qiagen), DNA was extracted using the MagAttract HMW DNA Kit (Qiagen). DNA was eluted in 100 µl of AE buffer (Qiagen) and then cleaned using the DNEasy PowerClean Pro Cleanup Kit (Qiagen). DNA was then sheared using the Covaris g-TUBE (Covaris). Sequencing libraries were prepared using the SMRTbell Express Template Prep Kit 2.0 (Pacific Biosciences) and 1500 ng of the sheared and purified DNA. The SMRTbell libraries were size-selected (>6 Kb) using a BluePippin instrument (Sage Science) and 0.75% agarose gel. Libraries were then sequenced using the PacBio Sequel II (Pacific Biosciences) platform and a 30-hour movie time. Narrative Summary In these Narratives, we filtered low-quality reads using Trimmomatic (v0.36), assembled filtered reads with SPAdes (v3.15.3), and then checked completeness and contamination of the assembled genomes with CheckM (v1.0.18). Statistics for sequencing and assembly are in table S3. Using the assembled contigs (genomes), we called genes and annotated them. Protein-coding genes were called using Prodigal (v2.6.3) (3) locally or using KBase via RASTtk (v1.073), with identical results. Genes were annotated with KO IDs using KAAS (4). They were further annotated with pfam and TIGRFAM IDs using KBase and the Annotate Domains in a Genome app. We classified putative genes for hydrogenases using HydDB. Genes for 16S ribosomal RNA (rRNA) were called using RASTtk (v1.073) in KBase. The contigs (genomes) were analyzed to determine whether they belonged to new species. Taxonomy was assigned using GTDB-Tk (v1.7.0) in KBase. The identity of 16S rRNA genes to other organisms was found using EzBioCloud (5). Values of digital DNA-DNA hybridization (dDDH) were found with Type (Strain) Genome Server (6). These analyses suggest that Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11 represent novel species or genera. GTDB-Tk assigned Lachnospiracae sp. C1.1 to family Lachnospiraceae and genus NK4A144, which contains no type strains. It assigned Porphyromonadaceae sp. W3.11 to Porphyromonadaceae and genus Porphyromonas_A. Values of 16S rRNA identity and dDDH with respect to type strains were low (table S4). Although more phenotypic data are needed, available evidence supports assignment of genomes to new species or genera. Related publication Hackmann TJ, Zhang B. The phenotype and genotype of fermentative prokaryotes. Sci Adv. 2023 Sep 29;9(39):eadg8687. doi: 10.1126/sciadv.adg8687. Epub 2023 Sep 27. PMID: 37756392; PMCID: PMC10530074.

Hackmann, Timothy↗

DOE OSTI2024

KBase Narrative - Lachnospiraceae sp. C1.1 genome

Narratives for The phenotype and genotype of fermentative prokaryotes This is the Narrative for Porphyromonadaceae sp. W3.11. A complementary Narrative for Lachnospiraceae sp. C1.1 is available here. This is the Narrative for Lachnospiraceae sp. C1.1. A complementary Narrative for Porphyromonadaceae sp. W3.11 is available here. Background and Isolation This Narrative and its complementary Narrative contain assembly and annotation of two bacterial isolates that were isolated by our laboratory from the rumen of a Holstein heifer. All procedures with animals have been approved by University of California Davis’s Institutional Animal Care and Use Committee. Rumen contents were collected through a rumen fistula and strained through two layers of cheesecloth into a bottle. The bottle was sealed to exclude air and maintained at 39°C. Contents were brought to the laboratory and bubbled under O2-free CO2 within 15 min. At the laboratory, serial dilutions were made with anaerobic dilution solution for Lachnospiraceae sp. C1.1 and propionibacterium diluent for Porphyromonadaceae sp. W3.11 (table S2). Aliquots (0.1 ml) of each dilution were injected into anaerobic bottle plates (1) containing 9 ml of LH medium (table S2). After incubation at 37°C for 7 days, isolated colonies were picked. Lachnospiraceae sp. C1.1 was picked from a bottle inoculated with a 104 dilution of rumen contents, and Porphyromonadaceae sp. W3.11 was picked from a bottle inoculated with a 103 dilution. After initial isolation, these organisms were purified by growing on anaerobic roll tubes (2) and picking isolated colonies. We performed de novo sequencing of Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11. Aliquots of liquid culture (9 and 1.5 ml, respectively) were collected by syringe and centrifuged (21,000g for 10 min at 4°C). Cell pellets were submitted to Molecular Research LP for DNA extraction, library preparation, and sequencing. After resuspending pellets in 180 µl of ATL buffer (Qiagen), DNA was extracted using the MagAttract HMW DNA Kit (Qiagen). DNA was eluted in 100 µl of AE buffer (Qiagen) and then cleaned using the DNEasy PowerClean Pro Cleanup Kit (Qiagen). DNA was then sheared using the Covaris g-TUBE (Covaris). Sequencing libraries were prepared using the SMRTbell Express Template Prep Kit 2.0 (Pacific Biosciences) and 1500 ng of the sheared and purified DNA. The SMRTbell libraries were size-selected (>6 Kb) using a BluePippin instrument (Sage Science) and 0.75% agarose gel. Libraries were then sequenced using the PacBio Sequel II (Pacific Biosciences) platform and a 30-hour movie time. Narrative Summary In these Narratives, we filtered low-quality reads using Trimmomatic (v0.36), assembled filtered reads with SPAdes (v3.15.3), and then checked completeness and contamination of the assembled genomes with CheckM (v1.0.18). Statistics for sequencing and assembly are in table S3. Using the assembled contigs (genomes), we called genes and annotated them. Protein-coding genes were called using Prodigal (v2.6.3) (3) locally or using KBase via RASTtk (v1.073), with identical results. Genes were annotated with KO IDs using KAAS (4). They were further annotated with pfam and TIGRFAM IDs using KBase and the Annotate Domains in a Genome app. We classified putative genes for hydrogenases using HydDB. Genes for 16S ribosomal RNA (rRNA) were called using RASTtk (v1.073) in KBase. The contigs (genomes) were analyzed to determine whether they belonged to new species. Taxonomy was assigned using GTDB-Tk (v1.7.0) in KBase. The identity of 16S rRNA genes to other organisms was found using EzBioCloud (5). Values of digital DNA-DNA hybridization (dDDH) were found with Type (Strain) Genome Server (6). These analyses suggest that Lachnospiraceae sp. C1.1 and Porphyromonadaceae sp. W3.11 represent novel species or genera. GTDB-Tk assigned Lachnospiracae sp. C1.1 to family Lachnospiraceae and genus NK4A144, which contains no type strains. It assigned Porphyromonadaceae sp. W3.11 to Porphyromonadaceae and genus Porphyromonas_A. Values of 16S rRNA identity and dDDH with respect to type strains were low (table S4). Although more phenotypic data are needed, available evidence supports assignment of genomes to new species or genera. Related publication Hackmann TJ, Zhang B. The phenotype and genotype of fermentative prokaryotes. Sci Adv. 2023 Sep 29;9(39):eadg8687. doi: 10.1126/sciadv.adg8687. Epub 2023 Sep 27. PMID: 37756392; PMCID: PMC10530074.

Hackmann, Timothy↗

DOE OSTI2023

Geochemistry and metagenomics analyses of bacterial community structure in selected waste dumpsites in Lagos Metropolis, Nigeria

Dumpsites are reservoirs of persistent organic pollutants (POPs) and heavy metals (HMs), constituting environmental hazards to humanity. Autochthonous microorganisms in dumpsites exhibit various degrees of responses to contaminants. Unfortunately, there is a dearth of information on the types and concentration of pollutants and the array of microorganisms in these dumpsites which may play important roles in the metabolism of such pollutants or other community processes. Therefore, determining the microbial community structure in such contaminated sites across a municipality is essential for profiling the taxa that would serve as consensus degraders of the pollutants. In this study, soil samples from three dumpsites (Cele, CS; Solous, SS; and Computer Village, CVS) were characterized for geochemical properties using GC-MS, MP-AES, and other analytical protocols, while the dynamics of bacterial communities were evaluated based on their 16S rRNA gene barcodes. A significant difference in the bacterial communities was observed among the dumpsites in relation to the extent of pollution caused by POPs and HMs. CVS, with the highest HM contamination, was rich in Actinobacteria (41.7%) and Acidobacteria (10.2%), in contrast to CS and SS. Proteobacteria (34.1%) and Firmicutes (20%) were the dominant phyla in CS (highest POP contamination), while Bacteroidetes (45.5%) and Proteobacteria (39.9%) were dominant in SS soil.Bacilluswas the dominant genus in the most polluted dumpsite. Canonical correspondence analysis revealed that polycyclic aromatic hydrocarbons (PAHs) and HMs shaped the structure of the bacterial operational taxonomic units (OTUs) in the most polluted dumpsite. Out of a total of 706 OTUs, 628 OTUs exhibited a significant correlation (>50%) with benzo(b)fluoranthene, azobenzene, dibenzofurans, pyrene, dibenzo(a,l)pyrene, Cu, and Zn. In particular, Proteobacteria (Achromobactersp. andSerratiasp.), Bacteroidetes (Zhouiasp.), and Firmicutes (Bacillussp.) were suggested to be pivotal to the ecophysiology of dumpsite soils contaminated with POPs and HMs. The results generally underscored the importance of metagenomic and physicochemical analyses of polluted systems in enabling correlations for useful prediction of drivers of such ecosystems. This will further improve our understanding of the metabolic potential and adaptation of organisms in such systems.

Environmental Sciences & Ecology↗

DOE OSTI2024

Stability optimization of energetic particle driven modes in nuclear fusion devices: the FAR3d gyro-fluid code

The development of reduced models provide efficient methods that can be used to perform short term experimental data analysis or narrow down the parametric range of more sophisticated numerical approaches. Reduced models are derived by simplifying the physics description with the goal of retaining only the essential ingredients required to reproduce the phenomena under study. This is the role of the gyro-fluid code FAR3d, dedicated to analyze the linear and nonlinear stability of Alfvén Eigenmodes (AE), Energetic Particle Modes (EPM) and magnetic-hydrodynamic modes as pressure gradient driven mode (PGDM) and current driven modes (CDM) in nuclear fusion devices. Such analysis is valuable for improving the plasma heating efficiency and confinement; this can enhance the overall device performance. The present review is dedicated to a description of the most important contributions of the FAR3d code in the field of energetic particles (EP) and AE/EPM stability. FAR3d is used to model and characterize the AE/EPM activity measured in fusion devices as LHD, JET, DIII-D, EAST, TJ-II and Heliotron J. In addition, the computational efficiency of FAR3d facilitates performing massive parametric studies leading to the identification of optimization trends with respect to the AE/EPM stability. This can aid in identifying operational regimes where AE/EPM activity is avoided or minimized. This technique is applied to the analysis of optimized configurations with respect to the thermal plasma parameters, magnetic field configuration, external actuators and the effect of multiple EP populations. In addition, the AE/EPM saturation phase is analyzed, taking into account both steady-state phases and bursting activity observed in LHD and DIII-D devices. The nonlinear calculations provide: the induced EP transport, the generation of zonal structures as well as the energy transfer towards the thermal plasma and between different toroidal/helical families. Finally, FAR3d is used to forecast the AE/EPM stability in operational scenarios of future devices as ITER, CFETR, JT60SA and CFQS as well as possible approaches to optimization with respect to variations in the most important plasma parameters.

Alfv én Eigenmodes↗

DOE OSTI2021

Studying Interfacial Dark Reactions of Glyoxal and Hydrogen Peroxide Using Vacuum Ultraviolet Single Photon Ionization Mass Spectrometry

Aqueous secondary organic aerosol (aqSOA) formation from volatile and semivolatile organic compounds at the air–liquid interface is considered as an important source of fine particles in the atmosphere. However, due to the lack of in situ detecting techniques, the detailed interfacial reaction mechanism and dynamics still remain uncertain. In this study, synchrotron-based vacuum ultraviolet single-photon ionization mass spectrometry (VUV SPI-MS) was coupled with the System for Analysis at the Liquid Vacuum Interface (SALVI) to investigate glyoxal dark oxidation products at the aqueous surface. Mass spectral analysis and determination of appearance energies (AEs) suggest that the main products of glyoxal dark interfacial aging are carboxylic acid related oligomers. Furthermore, the VUV SPI-MS results were compared and validated against those of in situ liquid time-of-flight secondary ion mass spectrometry (ToF-SIMS). The reaction mechanisms of the dark glyoxal interfacial oxidation, obtained using two different approaches, indicate that differences in ionization and instrument operation principles could contribute to their abilities to detect different oligomers. Therefore, the mechanistic differences revealed between the VUV SPI-MS and ToF-SIMS indicate that more in situ and real-time techniques are needed to investigate the contribution of the air–liquid interfacial reactions leading to aqSOA formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Investigation of the Effect of Injected CO 2 on the Morrow B Sandstone through Laboratory Batch Reaction Experiments: Implications for CO 2 Sequestration in the Farnsworth Unit, Northern Texas, USA

About one million tons of CO 2 have been injected into the Farnsworth unit to date. The target reservoir for CO 2 injection is the Morrow B Sandstone, which is primarily made of quartz with lesser amounts of albite, calcite, chlorite, and clay minerals. The impact of CO 2 injection on the mineralogy, porosity, and pore water composition of the Morrow B Sandstone is a major concern. Although numerical modeling studies suggest that porosity changes will be minimal, significant alterations to mineralogy and pore water composition are expected. Given the implications for CO 2 storage effectiveness and risk assessment, it is crucial to verify the accuracy of theoretical model predictions through laboratory experiments. To this end, batch reaction experiments were conducted to model conditions near an injection well in the Morrow B Sandstone and at locations further away, where the CO 2 has been diluted by formation water. The laboratory experiments involved submerging thin sections of both coarse- and fine-grained facies of the Morrow B Sandstone in formation water samples with varying levels of CO 2 . The experiments were conducted at the reservoir temperature of 75 °C. Two experimental runs were conducted, one lasting for 61 days and the other for 72 days. The initial fluid composition used in the second run was the same as in the first. The mineralogy changes in the thin sections were analyzed using SEM and the Tescan Integrated Mineral Analyzer (TIMA), while changes in the composition of the formation water were determined using ICP-AES. During each experiment, a thin layer of white fine-grained particles consisting mainly of dolomite and silica formed on the surface of the thin sections, leading to significant reductions in Ca, Mg, and Sr in the formation water. This outcome is consistent with numerical model predictions that dolomite would be the primary mineral that would react with injected CO 2 and that silica would be oversaturated in the formation water. Changes in mineral abundance in the thin sections themselves were much less systematic than in the theoretical modeling experiments, perhaps reflecting heterogeneities in the mineral grain size surface area to volume ratios and mineral distributions in the thin sections not considered in the numerical models.

58 GEOSCIENCES↗

DOE OSTI2021

The Eco-Bio-Social Factors That Modulate Aedes aegypti Abundance in South Texas Border Communities

Aedes aegypti control requires dedicated resources that are usually scarce, limiting the reach and sustainability of vector control programs. This generates a need to focus on areas at risk of disease transmission and also understand the factors that might modulate local mosquito abundance. We evaluated the eco-bio-social factors that modulate indoor and outdoor relative abundance of female Ae. aegypti in communities of South Texas. We conducted housing quality and Knowledge Attitudes and Practices surveys in households that were part of a weekly mosquito surveillance program in November of 2017 and 2018. Our results showed widespread knowledge of mosquitoes and Zika virus by our participants. However, less than 35% considered them as serious problems in this region. The presence of window-mounted air conditioning units increased the risk of female mosquito relative abundance indoors. An increase in outdoor relative abundance was associated with larger properties and a higher number of children between 6 to 17 years of age. Interestingly, we observed that an increasing number of children <5 years of age modulated both indoor and outdoor relative abundance, with a 52% increase indoors and 30% decrease outdoors. The low perception of mosquito and disease risk highlights engagement needs for vector-borne disease prevention in this region. The identified risk factors can help guide public health officials in their efforts to reduce human and vector contact.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Drug Resistance in Filarial Parasites Does Not Affect Mosquito Vectorial Capacity

Parasite drug resistance presents a major obstacle to controlling and eliminating vector-borne diseases affecting humans and animals. While vector-borne disease dynamics are affected by factors related to parasite, vertebrate host and vector, research on drug resistance in filarial parasites has primarily focused on the parasite and vertebrate host, rather than the mosquito. However, we expect that the physiological costs associated with drug resistance would reduce the fitness of drug-resistant vs. drug-susceptible parasites in the mosquito wherein parasites are not exposed to drugs. Here we test this hypothesis using four isolates of the dog heartworm (Dirofilaria immitis)—two drug susceptible and two drug resistant—and two vectors—the yellow fever mosquito (Aedes aegypti) and the Asian tiger mosquito (Ae. albopictus)—as our model system. Our data indicated that while vector species had a significant effect on vectorial capacity, there was no significant difference in the vectorial capacity of mosquitoes infected with drug-resistant vs. drug-susceptible parasites. Consequently, contrary to expectations, our data indicate that drug resistance in D. immitis does not appear to reduce the transmission efficiency of these parasites, and thus the spread of drug-resistant parasites in the vertebrate population is unlikely to be mitigated by reduced fitness in the mosquito vector.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

One-Step Spark Plasma Erosion Processing of Carbon-Coated Sn-Si Nanoparticles for Lithium-Ion Battery Anodes

High density portable energy storage is desirable owing to the energy requirements of portable electronics and electric vehicles. The Li-ion battery’s high energy density could be even further improved through the utilization of alternative materials (instead of carbon) for the anode, such as Sn or Si. Nonetheless, the large volume expansion upon lithiation, up to ~300% for Li 22 Si 5 , causes pulverization and rapid capacity degradation during cycling. Sn also forms a Li 22 Sn 5 compound with the equivalent stoichiometric Li capacity but with enhanced ductility. Nano-sized Si and Sn have demonstrated distinctive nanoscale properties, facilitating the retention of higher capacities, particularly when coated with carbon, which improves mechanical stability. To date, the methods of synthesizing coated Si, Sn, or Si-Sn alloyed nanoparticles are complicated, costly, and not readily scalable to meet the demands of cost-effective manufacturing. Spark plasma erosion in a hydrocarbon dielectric has been explored as a one-step process to produce Sn-Si alloy nanoparticles coated with a thin carbon film, offering a scalable and cost-effective processing route. The resulting Sn-Si particles exhibited a bi-modal size distribution at ~5 nm and ~500 nm and were carbon-coated, as intended, from the hydrocarbon dielectric breakdown. The spark-eroded nanoparticles were thoroughly characterized using TEM/EDS, XPS, AES, SSNMR, and TGA, and their improved electrochemical performance was assessed through half-cell experiments.

25 ENERGY STORAGE↗

DOE OSTI2025

Computationally Selected Multivalent HIV-1 Subtype C Vaccine Protects Against Heterologous SHIV Challenge

Background: The RV144 trial in Thailand is the only HIV-1 vaccine efficacy trial to date to demonstrate any efficacy. Genetic signatures suggested that antibodies targeting the variable loop 2 (V2) of the HIV-1 envelope played an important protective role. The ALVAC prime and protein boost follow-up trial in southern Africa (HVTN702) failed to show any efficacy. One hypothesis for this is the greater diversity of subtype C viruses in southern Africa relative to CRF01_AE in Thailand. Methods: Here, we determined whether an ALVAC prime with computationally selected gp120 boost immunogens maximizing coverage of diversity of subtype C viruses in the variable V1 and V2 regions (V1V2) improved the protection of non-human primates (NHPs) from a heterologous subtype C SHIV challenge compared to more traditional regimens. Results: An ALVAC prime with Trivalent subtype C gp120 boosts resulted in statistically significant protection from repeated intrarectal SHIV challenges compared to the control. Evaluation of the immunogenicity of each vaccine regimen at the time of challenge demonstrated that different gp120 combination boosts elicited similar high magnitudes of gp120 and breadth of V1V2-binding antibodies, as well as strong Fc-mediated immune responses. Low-to-no neutralization of the challenge virus was detected. A Cox proportional hazard analysis of five pre-selected immune parameters at the time of challenge identified ADCC against the challenge envelope as a correlate of protection. Systems serology analysis revealed that immune responses elicited by the different vaccine regimens were distinct and identified further correlates of resistance to infection. Conclusions: Computationally designed vaccines with maximized subtype C V1V2 coverage mediated protection of NHPs from a heterologous Tier-2 subtype C SHIV challenge.

Immunology↗

DOE OSTI2020

First Images of the Protoplanetary Disk around PDS 201

Scattered light imaging has revealed nearly a dozen circumstellar disks around young Herbig Ae/Be stars—enabling studies of structures in the upper disk layers as potential signs of ongoing planet formation. We present the first images of the disk around the variable Herbig Ae star PDS 201 (V* V351 Ori) and an analysis of the images and spectral energy distribution through 3D Monte Carlo radiative transfer simulations and forward modeling. The disk is detected in three data sets with the Large Binocular Telescope Interferometer/Large Binocular Telescope mid-infrared camera at the Large Binocular Telescope, including direct observations in the Ks and L′ filters, and an L′ observation with the 360° vector apodizing phase plate coronagraph. The scattered light disk extends to a very large radius of ∼250 au, which places it among the largest of such disks. Exterior to the disk, we establish detection limits on substellar companions down to ∼5 M {sub Jup} at ≳1.″5 (≳500 au), assuming the Baraffe et al. models. The images show a radial gap extending to ∼0.″4 (∼140 au at a distance of 340 pc) that is also evident in the spectral energy distribution. The large gap is a possible signpost of multiple high-mass giant planets at orbital distances (∼60–100 au) that are unusually massive and widely separated compared to those of planet populations previously inferred from protoplanetary disk substructures.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Follow-up Studies of Five Cataclysmic Variable Candidates Discovered by LAMOST

We report follow-up observations of five cataclysmic variable candidates from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) published by Hou et al. LAMOST J024048.51+195226.9 is the most unusual of the five; an early-M type secondary star contributes strongly to its spectrum, and its spectral and photometric behavior are strikingly reminiscent of the hitherto-unique propeller system AE Aqr. We confirm that a 7.34 hr period discovered in the Catalina survey data is orbital. Another object, LAMOST J204305.95+341340.6, appears to be a near twin of the novalike variable V795 Her, with an orbital period in the so-called 2–3 hr “gap.” LAMOST J035913.61+405035.0 is evidently an eclipsing, weakly outbursting dwarf nova with a 5.48 hr period. Our spectrum of LAMOST J090150.09+375444.3 is dominated by a late-type secondary and shows weak, narrow Balmer emission moving in phase with the absorption lines, but at lower amplitude; we do not see the He ii λ4686 emission evident in the published discovery spectrum. We again confirm that a period from the Catalina data, in this case 6.80 hr, is orbital. LAMOST J033940.98+414805.7 yields a radial-velocity period of 3.54 hr, and its spectrum appears to be typical of novalike variables in this period range. The spectroscopically selected sample from LAMOST evidently includes some interesting cataclysmic variables that have been unrecognized until now, apparently because of the relatively modest range of their photometric variations.

79 ASTRONOMY AND ASTROPHYSICS↗