SEARCH · Search NASA

Results for “ALTIMETER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Seasat altimeter timing bias estimation

A technique developed for the solution of time lag bias based on the analysis of sea surface height discrepancies at ground track intersections, prompted by the presence of a time calibration bias in Seasat altimeter data that produced measurement errors in excess of 1 m, is shown to yield a separation of the dominant, once-per-revolution ephemeris error amounting to about 1.5 m rms from the timing error signature. The technique does not depend on precise geoid data, and in application to a global Seasat altimeter data set covering July 28-August 9, 1978, has yielded a time lag value of -81.0 + or - 2 msec. This corroborates the -79.4 msec revised value derived from a reexamination of internal instrument time delays.

Marsh, J. G.↗

NASA NTRS1982

Seasat altimeter determination of ocean current variability

An experiment conducted in the Kuroshio Current, east of Japan, has confirmed the ability of radar altimeters of precision on the order of 10 cm, such as that of the Seasat satellite, to measure the small oceanic height variations associated with geostrophic ocean currents. Changes in surface dynamic height were inferred from data gathered by air-expendable barithermographs, which had been dropped to coincide with the Seasat subtrack, for the periods between the flights of September 25 and October 5 and 13, 1978. The changes registered generally agreed to within + or - 10 cm of the height changes observed in the altimeter data.

Bernstein, R. L.↗

NASA NTRS1983

Sidelooking laser altimeter for a flight simulator

An improved laser altimeter for a flight simulator which allows measurement of the height of the simulator probe above the terrain directly below the probe tip is described. A laser beam is directed from the probe at an angle theta to the horizontal to produce a beam spot on the terrain. The angle theta that the laser beam makes with the horizontal is varied so as to bring the beam spot into coincidence with a plumb line coaxial with the longitudinal axis of the probe. A television altimeter camera observes the beam spot and has a raster line aligned with the plumb line. Spot detector circuit coupled to the output of the TV camera monitors the position of the beam spot relative to the plumb line.

Webster, L. D.↗

NASA NTRS1981

Satellite laser altimeter for measurement of ice sheet topography

Results of a preliminary conceptual design study are presented for a laser altimeter that is capable of high-resolution mapping of the polar ice sheets and is proposed for inclusion in the National Oceanic Satellite System spacecraft or other polar-orbiting satellites. The instrument consists of a pulsed-laser transmitter operating at a wavelength of 532 nm and a duration of 5 nsec, a receiver telescope, a photomultiplier-tube detector, data processing and control electronics, and an attitude sensing and measurement system; a laser footprint diameter of 70 m is planned. The altimeter components are described, and the accuracy of both the altimetry measurement and the attitude measurement is evaluated. A range precision of about 10 cm is estimated, along with an attitude measurement accuracy of approximately 10 arcsec.

Bufton, J. L.↗

NASA NTRS1983

Southern ocean mean monthly waves and surface winds for winter 1978 by Seasat radar altimeter

Data acquired by the SEASAT radar altimeter during the 3 month satellite lifetime are analyzed in a study of the sea state of the southern hemisphere oceans. The lifetime of the SEASAT satellite, July 7 to October 10, 1978, corresponds to the Antarctic winter. Mean monthly maps of wind speed, significant wave height, and swell have been generated from the altimeter measurements along the satellite tracks. These maps delineate spatial and temporal differences of these parameters in the Atlantic, Indian, and Pacific oceans. Several features of the Southern Ocean wind and wave fields agree with conventional descriptions. For example, the principle zonal wind regimes established by the Southeast Trades and Westerlies are clearly evident in the monthly averages. Significant wave height and swell also exhibit minima near the Doldrums at low latitudes with steady increases southward to the latitudes of the Westerlies. However, superimposed on these general patterns is significant variability with horizontal scales as small as 1000 km. The maps also document a gradual migration of the region of absolute maximum wind and wave from the Atlantic eastward to the Indian Ocean and finally into the Pacific.

Mognard, N. M.↗

NASA NTRS1982

An analysis of the multibeam altimeter

The design concept and computer simulations of a multibeam altimeter (MA) to provide satellite-based oceanographic-feature data for map construction within relatively short times are presented. The limitations of the pulse-limited radar altimeter used on GEOS-3 and SEASAT-A, in particular the narrow swath of each measurement pass, are characterized. The MA uses interferometry with two 1.2-m dish antennas separated by an 11-m boom to cover a total swath width of 100 km at satellite altitude 800 km, nominal repetition rate 6 kp/sec, and nominal integration time 2.5 sec. Simulation analysis of antenna element pattern, echo shape, tracking algorithms, tracking noise, and measurement accuracy was performed, and the general feasibility of ocean-current mapping with a one-week time delay, using two MA-equipped satellites, was demonstrated.

Bush, G. B.↗

NASA NTRS1983

Remote sensing of atmospheric pressure and sea state from satellites using short-pulse multicolor laser altimeters

Short pulse multicolor laser ranging systems are currently being developed for satellite ranging applications. These systems use Q-switched pulsed lasers and streak tube cameras to provide timing accuracies approaching a few picoseconds. Satellite laser ranging systems was used to evaluate many important geophysical phenomena such as fault motion, polar motion and solid earth tides, by measuring the orbital perturbations of retroreflector equipped satellites. Some existing operational systems provide range resolution approaching a few millimeters. There is currently considerable interest in adapting these highly accurate systems for use as airborne and satellite based altimeters. Potential applications include the measurement of sea state, ground topography and atmospheric pressure. This paper reviews recent progress in the development of multicolor laser altimeters for use in monitoring sea state and atmospheric pressure.

Gardner, C. S.↗

NASA NTRS1984

Theoretical and experimental analysis of laser altimeters for barometric measurements over the ocean

The statistical characteristics and the waveforms of ocean-reflected laser pulses are studied. The received signal is found to be corrupted by shot noise and time-resolved speckle. The statistics of time-resolved speckle and its effects on the timing accuracy of the receiver are studied in the general context of laser altimetry. For estimating the differential propagation time, various receiver timing algorithms are proposed and their performances evaluated. The results indicate that, with the parameters of a realistic altimeter, a pressure measurement accuracy of a few millibars is feasible. The data obtained from the first airborne two-color laser altimeter experiment are processed and analyzed. The results are used to verify the pressure measurement concept.

Tsai, B. M.↗

NASA NTRS1984

Improved resolution rain measurements from spaceborne radar altimeters

Rain measurement of the type described here are considered vital from the standpoint of representing a flag for altimeter data that may be corrupted by rain. It also provides sorely needed rain data over the oceans where little or no such data is available. It is demonstrated that improved resolution measurements of precipitation may be obtained from satellite borne radars with antenna beams having relatively large surface footprints. The method employs deconvolution and Fourier transform procedures, and assumes a knowledge of the antenna beam pattern. As an example, the technique is specifically directed towards the application of future spaceborne radar altimeters which may contain additional range gates to enable the measurement of rain at altitude. It is demonstrated that because of the natural variability of rain in the lateral extent, the standard beam averaging over the footprint could easily produce erroneous interpretations of the intensity of rain and its extent. On the other hand, many of these ambiguities may be removed employing the deconvolution techniques described.

Goldhirsh, J.↗

NASA NTRS1984

Simulation and assimilation of satellite altimeter data at the oceanic mesoscale

An improved "objective analysis' technique is used along with an altimeter signal statistical model, an altimeter noise statistical model, an orbital model, and synoptic surface current maps in the POLYMODE-SDE area, to evaluate the performance of various observational strategies in catching the mesoscale variability at mid-latitudes. In particular, simulated repetitive nominal orbits of ERS-1, TOPEX, and SPOT/POSEIDON are examined. Results show the critical importance of existence of a subcycle, scanning in either direction. Moreover, long repeat cycles ( 20 days) and short cross-track distances ( 300 km) seem preferable, since they match mesoscale statistics. Another goal of the study is to prepare and discuss sea-surface height (SSH) assimilation in quasigeostrophic models. Restored SSH maps are shown to meet that purpose, if an efficient extrapolation method or deep in-situ data (floats) are used on the vertical to start and update the model.

Demay, P.↗

NASA NTRS1984

Electromagnetic bias of 36-GHz radar altimeter measurements of MSL

The data reduction techniques used to determine the magnitude of electromagnetic (EM) bias in radar altimeter measurements of mean sea level (MSL) area described. Particular attention is given to the bias reduction scheme developed specifically for the Surface Contour Radar (SCR) instrument of the Ocean Topography Experiment (TOPEX). The SCR makes it possible to determine the amount of the backscattered power due to EM reflectance per unit area by measuring both the return power and elevation. Variations of backscattered power for different sea states are determined as a function of displacement of the MSL. On the basis of the recent SCR observations from aircraft, a standard error due to EM bias is predicted for MSL measurements performed with a satellite altimeter radar operating at a frequency of 36 GHz. The obtained standard error was 1 percent for regions with waves 1.9-5.5 meters in height.

Walsh, E. J.↗

NASA NTRS1986

Achieving improved frequency response of the rain structure from spaceborne radar altimeters by employing deconvolution methods

A technique is described for arriving at improved measurements of the rain structure near the earth's surface from satellite-borne radars. The method uses deconvolution and Fourier transform procedures and assumes a knowledge of the antenna beam pattern. As an example, the method is directed toward the application of future spaceborne radar altimeters that may contain additional range gates to permit the measurement of rain in the lower troposphere. Using a radar-measured rain reflectivity profile acquired at Wallops Island, VA, in a simulation example, it is specifically demonstrated that improved measurements of the spatial frequency spectrum of the rain structure may be deduced by means of deconvolution methods, as compared to the measured spectrum derived by beam averaging. Rain measurements are considered vital from the standpoint of providing a flag for altimeter data that may be corrupted by rain. Such measurement capabilities should also provide sorely needed data on rain over the oceans where few or no such data are available for the meteorologist or the communicator interested in space diversity communications.

Goldhirsh, J.↗

NASA NTRS1985

Remote sensing of atmospheric pressure and sea state using laser altimeters

Short-pulse multicolor laser ranging systems are currently being developed for satellite ranging applications. These systems use Q-switched pulsed lasers and streak-tube cameras to provide timing accuracies approaching a few picoseconds. Satellite laser ranging systems have been used to evaluate many important geophysical phenomena such as fault motion, polar motion and solid earth tides, by measuring the orbital perturbations of retroreflector equipped satellites. Some existing operational systems provide range resolution approaching a few millimeters. There is currently considerable interest in adapting these highly accurate systems for use as airborne and satellite based altimeters. Potential applications include the measurement of sea state, ground topography and atmospheric pressure. This paper reviews recent progress in the development of multicolor laser altimeters for use in monitoring sea state and atmospheric pressure.

Gardner, C. S.↗

NASA NTRS1987

Martian surface physical properties to be derived by radar altimeter on the Mars observer spacecraft

The potential is described of a candidate Mars Observer altimeter for determining dielectric properties of Mars regolith. It is pointed out that it is straightforward to use the time between altimeter pulse trains for passive radiometry (hence dielectric properties) and roughness can be derived. Given the mission plan the whole surface can be mapped at least three times, yielding data on seasonal variability.

Garvin, J. B.↗

NASA NTRS1988

A Mars orbital laser altimeter for rover trafficability: Instrument concept and science potential

Limited information on the types of geologic hazards (boulders, troughs, craters etc.) that will affect rover trafficability on Mars are available for the two Viking Lander sites, and there are no prospects for increasing this knowledge base in the near future. None of the instrument payloads on the upcoming Mars Observer or Soviet PHOBOS missions can directly measure surface obstacles on the scales of concern for rover safety (a few meters). Candidate instruments for the Soviet Mars 92 orbiter/balloon/rover mission such as balloon-borne stereo imaging, rover panoramic imaging, and orbital synthetic aperature imaging (SAR) are under discussion, but data from this mission may not be available for target areas of interest for the U.S. Mars Rover Sample Return (MRSR) mission. In an effort to determine how to directly measure the topography of surface obstacles that could affect rover trafficability on Mars, we are studying how to design a laser altimeter with extremely high spatial and vertical resolution that would be suitable for a future Mars Orbiter spacecraft (MRSR precursor or MRSR orbiter). This report discusses some of the design issues associated with such an instrument, gives examples of laser altimeter data collected for Mars analog terrains on Earth, and outlines the scientific potential of data that could be obtained with the system.

Garvin, J. B.↗

NASA NTRS1989

User's guide: Programs for processing altimeter data over inland seas

The programs described were developed to process GEODYN-formatted satellite altimeter data, and to apply the processed results to predict geoid undulations and gravity anomalies of inland sea areas. These programs are written in standard FORTRAN 77 and are designed to run on the NSESCC IBM 3081(MVS) computer. Because of the experimental nature of these programs they are tailored to the geographical area analyzed. The attached program listings are customized for processing the altimeter data over the Black Sea. Users interested in the Caspian Sea data are expected to modify each program, although the required modifications are generally minor. Program control parameters are defined in the programs via PARAMETER statements and/or DATA statements. Other auxiliary parameters, such as labels, are hard-wired into the programs. Large data files are read in or written out through different input or output units. The program listings of these programs are accompanied by sample IBM job control language (JCL) images. Familiarity with IBM JCL and the TEMPLATE graphic package is assumed.

Au, A. Y.↗

NASA NTRS1989

Observations on electromagnetic bias in radar altimeter sea surface measurements

Because the relative radar cross section of the sea surface increases below mean sea level and decreases above it, the range measurements of satellite radar altimeters are biased toward the wave troughs. Published and unpublished direct measurements of this electromagnetic (EM) bias are examined as well as the predictions of theoretical developments. The EM bias is predominantly a function of the radar frequency used, averaging 1.2 percent of the wave height of Ka band and 3.3 percent of the wave height at X band. The airborne measurements present a consistent picture of the variation of the relative radar cross section as a function of deviation from mean sea level. A technique to measure EM bias at the Ku and C band operating frequencies of the Topex satellite altimeter is described.

Walsh, Edward J.↗

NASA NTRS1990

Interannual differences of Geosat altimeter heights and sea level - The importance of a datum

Sea surface height data from the Geosat altimeter are compared with island sea level data from 18 gages in the western and central tropical Pacific during December 1986 to November 1987. Care was taken to ensure that the two data sets are referenced to the same mean surface. This was done by requiring that both data sets have a zero mean sea level over the period April 1985 to April 1986. When the annual means are computed at each station in the later time period, it is found that the annual mean sea surface height values have drifted away from the corresponding sea level values by as much as 16 cm. Further, the pattern of differences that develop between the two data sets is not random but is spatially coherent with a strong east-west gradient. These observations illustrate the necessity for sea surface height data to be referred to a well-defined zero point, a datum, in order to reliably monitor interannual changes in the sea surface topography. Until these differences can be eliminated, it will be necessary to use tide gage data as benchmarks for the altimeter sea surface height data.

Wyrtki, Klaus↗