SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mass motions are a principal means by which components of solar flares can be distinguished. Typical patterns of mass motions in H-alpha are described for chromospheric flare ribbons, remote chromospheric flare patches, flare loops, flaring arches, surges, erupting filaments and some expanding coronal features. Interrelationships between these phenomena are discussed and illustrations of each are presented.
Results from a high-resolution multi-layer-coated X-ray imaging telescope, part of the Normal Incidence X-ray Telescope sounding rocket payload are presented. Images of the peak of a two-ribbon flare showed detailed structure within each ribbon, as well as the expected bright arches of emission connecting the ribbons. The number of X-ray bright points is small, consistent with predictions based on the previous solar cycle. Topology of the magnetic structure is complex and highly tangled, implying that the magnetic complexity of the photosphere is paralleled in the corona.
Formulation of hierarchic sequences of finite element models for beams, arches, plates and shells based on the principle of virtual work is described. The exact solutions corresponding to models in the hierarchic sequence converge to the exact solution of the fully three-dimensional problem of linear elasticity. The stopping criterion is that the functionals of interest must be substantially independent of the choice of the model. This process is closely related to p-extensions. Aspects of implementation are discussed in connection with axisymmetric shells and an example is presented. An application of superconvergent extraction methods for the computation of stress resultants is demonstrated.
The design of a greenhouse that will be a component of a long-term habitat on Mars is presented. The greenhouse will be the primary food source for people stationed on Mars. The food will be grown in three identical underground modules, pressurized at 1 atm to allow a shirt-sleeve environment within the greenhouse. The underground location will support the structure, moderate the large environmental variations on the surface, and protect the crops from cosmic radiation. The design effort is concentrated on the outer structure and the lighting system for the greenhouse. The structure is inflatable and made of a Kevlar 49/Epoxy composite and a pipe-arched system that is corrugated to increase stiffness. This composite is pliable in an uncured state, which allows it to be efficiently packaged for transport. The lighting system consists of several flat-plate fiber optic solar collectors with dual-axis tracking systems that will continually track the sun. This design is modeled after the Himawari collector, which was designed by Dr. Kei Mori and is currently in use in Japan. The light will pass through Fresnel lenses that filter out undesirable wavelengths and send the light into the greenhouses by way of fiber optic cables. When the light arrives at the greenhouse, it is dispersed to the plants via a waveguide and diffuser system.
The SAMPIE flight experiment, tentatively scheduled to fly on a shuttle mission in mid 1992, will investigate plasma interactions of high voltage space power systems. Solar cells representing a number of technologies will be biased to high voltage to study both negative potential arching and positive potential current collection characteristics. Additionally, several idealized metal/insulator mockups will be flown to study the basic nature of these interactions. Described here is the basic rationale for a space experiment as well as the measurements to be made and the significance of the expected results. The current design status of the flight hardware is presented.
The long history of research into the internal structure of turbulent boundary layers has not provided a unified picture of the physics responsible for turbulence production and dissipation. The goals of the present research are to: (1) define the current state of boundary layer structure knowledge; and (2) utilize direct numerical simulation results to help close the unresolved issues identified in part A and to unify the fragmented knowledge of various coherent motions into a consistent kinematic model of boundary layer structure. The results of the current study show that all classes of coherent motion in the low Reynolds number turbulent boundary layer may be related to vortical structures, but that no single form of vortex is representative of the wide variety of vortical structures observed. In particular, ejection and sweep motions, as well as entrainment from the free-streem are shown to have strong spatial and temporal relationships with vortical structures. Disturbances of vortex size, location, and intensity show that quasi-streamwise vortices dominate the buffer region, while transverse vortices and vortical arches dominate the wake region. Both types of vortical structure are common in the log region. The interrelationships between the various structures and the population distributions of vortices are combined into a conceptual kinematic model for the boundary layer. Aspects of vortical structure dynamics are also postulated, based on time-sequence animations of the numerically simulated flow.
The general properties of elementary bipoles (EBs), the class of moving magnetic features identified by Frazier (1972) as building blocks of new solar active regions, are described, and variations in their characteristics are illustrated with extensive videomagnetograms obtained at Big Bear Solar Observatory during 1984-1989. Consideration is given to ephemeral active regions consisting of EBs with only one positive and one negative pole, multiple-pole ephemeral regions, reversed-polarity EBs, interactions among EBs and adjacent magnetic features, and the EBs of small and medium active regions. The detection of EBs prior to the appearance of arch filaments confirms the relationship found by Frazier.
Measurements of far-infrared lines and continuum from G0.095 + 0.012 and the E2 thermal 'arched' radio filament near the Galactic center are well explained by numerous embedded stars with T(eff) about 35,000 K. The structure of the filament and the apparent absence of hotter stars are qualitatively difficult to reconcile with this idea.
A passive damping device intended to replace individual struts in precision truss structures for space applications is described. The theory of operation of the D-Strut device is detailed, and simple five- and three-parameter models are derived. Results from tests conducted to characterize the D-Strut at submicron displacement levels are reporeted. The incorporation of a strut in a precision truss testbed is described. Parameters determined from the component-level tests are used in a finite element model of the truss, and damping augmentation is predicted. Using the simple three-parameter model, a damper is selected for multiple placement in a separate optical interferometer truss testbed. The effect of the addition of the damper struts is illustrated analytically in a model of the structure. Finally, an improved Arched Flexure D-Strut that is expected to provide higher loss factors, and is currently under development, is described.
A method is developed to determine the weight, center of gravity, areal properties, and mass inertial properties for typical mirrors. A number of support conditions were considered to examine optical surface deflections, surface quality, and fundamental natural frequency for single- and double-arch mirror shapes. Structural performance estimates were made with the NASTRAN program, and optical performances were evaluated with the FRINGE program, using an SXA 40-in mirror. To show the behavior of element types from the NASTRAN program, finite element validity and sensitivity studies were performed in optical model applications. Material parameters, contoured back shapes, and support locations are shown to have significant effects on structural and optical performances. Optimal support locations and support points are given. Fundamental natural frequencies for some shapes are found with the closed-form solution. The plate models results may not be acceptable for determining real mirror optical performances.
High resolution radar images from the Magellan spacecraft have revealed the first details of the morphology of the Lavinia Planitia region of Venus. Lavinia is a broad lowland over 2000 km across, centered at about 45 deg S latitude, 345 deg E longitude. Herein, the tectonic evolution of Lavinia is discussed, and its possible relationship to processes operating in the planet's interior. The discussion is restricted to the region from 37.3 to 52.6 deg S latitude and from about 340 to 0 deg E longitude. One of the most interesting characteristics of Lavinia is that the entire region possesses a regional tectonic framework of striking regularity. Lavinia is also transected by a complex pattern of belts of intense tectonic deformation known as ridge belts. Despite the gross topographic similarity of all of the ridge belts in Lavinia, they exhibit two rather distinct styles of near surface deformation. One is composed of sets of broad, arch-like ridges rising above the surrounding plains. In the other type, obvious fold-like ridges are rare to absent in the radar images. Both type show evidence for small amounts of shear distributed across the belts.
The topics are presented in viewgraph form and include the following: the construction problem with the radiation shielding; preliminary construction analysis; the feasibility analysis of a small lunar tractor-scraper vehicle (LTSV); the scraper preliminary power analysis; LTSV feasibility; a small lunar dragline crane (LDC); a lunar superstructure arch (LSA); and the feasibility analysis of a lunar self-offloading lander crane.
Long-period acoustic waves generated in the solar convection zone can propagate radially outward through the overlying atmosphere and get resonantly absorbed in the magnetic arches of the low-lying chromospheric canopy. The resulting Poynting and acoustic flux that enters the magnetic canopy in the network regions is demonstrated to be adequate to account for the observed chromospheric emission.
The primary mirror assembly (PMA) requirements and concepts for the Space Infrared Telescope Facility (SIRTF) program are discussed. The PMA studies at NASA/ARC resulted in the design of two engineering test articles, the development of a mirror mount cryogenic static load testing system, and the procurement and partial testing of a full scale spherical mirror mounting system. Preliminary analysis and testing of the single arch mirror with conical mount design and the structured mirror with the spherical mount design indicate that the designs will meet all figure and environmental requirements of the SIRTF program.
The mechanisms of northern summertime teleconnections are investigated using a barotropic model. In a series of numerical experiments the atmospheric response over the eastern Pacific-North America to an idealized local divergence source corresponding to the northward displacement of the ITCZ in the eastern Pacific is studied. It is found that the response is much stronger in June than in May and is strongest when the forcing is located north of about 10 deg N. This can be explained in terms of the refractive properties of the climatological summertime subtropical jet stream over North America. In another series of experiments the global response as a function of the longitudinal location of the tropical forcing is examined. A wave train emanating from the subtropics of the western Pacific near the Philippines, arching across the Aleutians and the Gulf of Alaska, and terminating with a high anomaly over the continental United States appears over a wide longitudinal range of local forcing, suggesting the existence of a normal mode for the northern summertime climatological flow. The normal-mode concept is supported by further experiments using extratropical forcings as well as free-mode integrations.
Time-dependent MHD numerical simulations are used to study responses of the solar atmosphere and interplanetary medium to simulated solar disturbances. A number of 2D and 3D examples of coronal mass ejection (CME) simulations and some current controversies concerning the basic processes of CME initiation are discussed. Footpoint shearing motion is tested to determine whether it can provide a reasonable mechanism for CME development from arch filament configurations. Possible interplanetary consequences to CME-like disturbances are demonstrated by using 3D simulations to determine the dynamic response of the solar wind to a plasmoid injection from an eruptive filament or prominence. The possibility that a plasmoid may be generated in the interplanetary medium by a solar-generated shock that propagates through a heliospheric current sheet is discussed. Application of the 3D model for the interpretation of interplanetary scintillation observations is addressed.
Basic physical mechanisms for producing the observed intense magnetic flux tubes in the solar photosphere are reviewed. The mechanism of flux expulsion by convective cells can concentrate magnetic flux up to the equipartition field strength, which is only about 200 G at the solar surface for the observed granular convection. Other mechanisms that partially evacuate the flux tube are needed to produce further concentration of magnetic flux to the observed values of 1000-1500 G. Two such mechanisms are discussed: concentration by convective collapse of a vertical flux tube in the superadiabatic layer just below the solar surface, and concentration by a siphon flow in an arched, isolated flux tube.
Design and construction of a structure on the moon requires addressing a host of issues not encountered on earth. A modular quilted inflatable structure consisting of thin membranes of composite material integrated with supporting columns and arches is proposed. An initial linear analysis of the proposed structure is briefly reviewed. The actual response of an inflatable membrane is nonlinear and, hence, a nonlinear numerical analysis for the stresses and displacements was undertaken. Initial results clearly indicate that an inflatable structure is a feasible concept and is ideally suited for a lunar structure.