Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accretion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Modeling of surface roughness effects on glaze ice accretion

A series of experimental investigations focused on studying the cause and effect of roughness on accreting glaze ice surfaces were conducted. Detailed microvideo observations were made of glaze ice accretions on 1 to 4 inch diameter cylinders in three icing wind tunnels (the Data Products of New England six inch test facility, the NASA Lewis Icing Research Tunnel, and the B. F. Goodrich Ice Protection Research Facility). Infrared thermal video recordings were made of accreting ice surfaces in the Goodrich facility. Distinct zones of surface water behavior were observed; a smooth wet zone in the stagnation region with a uniform water film; a rough zone where surface tension effects caused coalescence of surface water into stationary beads; a horn zone where roughness elements grow into horn shapes; a runback zone where surface water ran back as rivulets; and a dry zone where rime feathers formed. The location of the transition from the smooth to the rough zone was found to migrate with time towards the stagnation point. The behavior of the transition appeared to be controlled by boundary layer transition and bead formation mechanisms at the interface between the smooth and rough zones. Regions of wet ice growth and enhanced heat transfer were clearly visible in the infrared video recordings of glaze ice surfaces. A simple multi-zone modification to the current glaze ice accretion model was proposed to include spatial variability in surface roughness.

Hansman, R. John, Jr.↗

Optical veiling, disk accretion, and the evolution of T Tauri stars

High-resolution spectra of 31 K7-M1 T Tauri stars (TTs) in the Taurus-Auriga molecular cloud demonstrate that most of these objects exhibit substantial excess emission at 5200 A. Extrapolations of these data consistent with low-resolution spectrophotometry indicate that the extra emission is comparable to the stellar luminosity in many cases. If this continuum emission arises in the boundary layers of accreting disks, more than about 30 percent of all TTs may be accreting material at a rate which is sufficiently rapid to alter their evolution from standard Hayashi tracks. It is estimated that roughly 10 percent of the final stellar mass is accreted in the TT phase. This amount of material is comparable to the minimum gravitationally unstable disk mass estimated by Larson and it is speculated that the TT phase represents the final stages of disk accretion driven by gravitational instabilities.

Hartmann, Lee W.↗

Neutron viscosity in accretion disks

Neutron viscosity is investigated as a possible mechanism for the dissipation of kinetic energy into luminosity in the innermost parts of accretion disks around compact objects. Simplified models are presented of the self-consistent, steady-state accretion flows in which viscosity is provided by neutron collisions with accreting ions. Ion temperatures are determined by balancing the heating of ions by viscous dissipation to their cooling by Coulomb collisions with the electrons, providing a self-consistent solution between neutron production and their impact on energy dissipation. The results indicate that neutrons can indeed provide the necessary dissipation to sustain the steady-state accretion of matter at rates of about 10 to the -8th solar mass/yr or less, and electron temperatures of about 100 keV-1 MeV. Neutrons thus present a promising way of modeling bright Galactic X-ray sources.

Guessoum, Nidhal↗

Structure and evolution of irradiated accretion disks. I - Static thermal equilibrium structure. II - Dynamical evolution of a thermally unstable torus

The thermal equilibrum structure and dynamical behavior of externally irradiated accretion disks are investigated. For radiative disks only the surface layer is heated, while for convective disks the heat penetrates deeply into the disk. For sufficiently strong radiation and given irradiation flux F(irr), the disk is completely stabilized against thermal instabilities of the sort invoked to explain dwarf novae. For moderately strong irradiation there is still an unstable branch in the thermal equilibrium curve. In typical soft X-ray transients, the disk is unstable against the dwarf-nova type instability. Fixed F(irr) on accretion disk annuli reduces the amplitude and the quiescent times and increases the outburst duration of the resultant light curves. Varying F(irr) in proportion to the mass accretion rate at the disks's inner edge results in light curves with a plateau in the decay from outbursts. In the case when irradiation is suddenly switched on, a temperature inversion results which leads to the formation of an accretion corona.

Tuchman, Y.↗

Nonlinear evolution of accretion disks induced by radiative feedback processes

The existence of accretion disks around young stellar objects has recently become widely accepted. The luminosity of some young stellar objects is highly variable and is generally attributed to the release of gravitational energy from matter funneled onto them by accretion disks. The inward transport of matter through these disks is coupled to the outward transfer of angular momentum. This transfer is most likely to be regulated by the mixing of adjacent annuli through the process of large-scale turbulence. Most of the accretion energy generated by this process emerges near the inner edge of the disk. This radiation may be intercepted by the disk and may modify the vertical and viscous evolution of the disk itself. If surface heating can stabilize the disk against the dominant viscous process, then in systems with large accretion rates, angular momentum transport and mass flow through the disk will be quenched. Using this result, it is shown that such a mechanism can induce feedback through the disk which produces oscillations in the luminosity of the central object. This oscillation can become chaotic in certain regimes and might thus explain the highly variable nature of many T Tauri systems and their outbursting counterparts: the FU Orionis objects.

Bell, K. R.↗

Nonlinear instability of the accretion line

The instability of the flow along the accretion line in the two-dimensional Bondi-Hoyle-Lyttleton type accretion flow is studied. By means of numerical simulations, the nonlinear regime of the instability is explored, thus extending a previous work that dealt with the linear regime using the WKB approximation. In contrast to the behavior in the linear regime, in the nonlinear regime the radial and tangential modes are coupled. The radial instability, which manifests itself as large density and velocity variations on short distances, grows far beyond the linear regime. The tangential instability, on the other hand, stays in the linear regime and is dominant by long-wavelength perturbations. This results from both the influence of the radial instability and the incoming material (the material accreted onto the accretion line).

Soker, Noam↗

Generation of ultrahigh-energy gamma rays in accreting x ray pulsars

Relativistic protons producing ultrahigh energy gamma rays as a result of nuclear collisions ought to be generated in close proximity to the surface of a neutron star due to accretion. The main features of the mechanism in question are a high efficiency of conversion of the gravitational energy of the accreting matter into acceleration energy and a high efficiency of the acceleration itself. It is shown that in accretion to a neutron star with a strong magnetic field, a loss cone type distribution of accreting protons is formed, which due to instability effectively generates small scale Alfven and proton cyclotron waves, as well as nonlinear waves (magneto-acoustic and Alfven solitons). The electric field of the moving solitons may accelerate the protons to energies of greater than 10(exp 15) eV. The region of acceleration is not locally isolated, but extends from its surface. New possible sources of ultrahigh energy gamma rays are predicted. They may be binary x ray systems containing neutron stars with magnetic fields of about 10(exp 9) gauss.

Gnedin, Yu. N.↗

Compton backscattered annihilation line emission: A new diagnostic of accreting compact sources

It is shown that Compton scattering of 511 keV electron-positron annihilation radiation produces a line like feature at approx. 170 keV from backscattered photons. Assuming a simple model of an accretion disk around a compact source, the spectrum is explored of the spectrum of Compton scattered annihilation line emission for a range of conditions. It is further shown that such Compton baskscattering of annihilation line emission from the inner edge of an accretion disk could account for the previously unidentified 170 keV line emission and high energy continuum observed from a variable, compact source, or sources, of annihilation radiation near the Galactic Center. Identification of the observed 170 keV line as an annihilation line reflection feature provides strong new evidence that the source of the emission is an accreting compact object. Further study of these features in existing spectra and in forthcoming GRO observation of these and other sources can provide unique new diagnostics of the innermost regions of accretion disks around compact objects.

Lingenfelter, Richard E.↗

Cooling of the magma ocean due to accretional disruption of the surface insulating layer

Planetary accretion has been considered as a process to heat planets. Some fraction of the kinetic energy of incoming planetesimals is trapped to heat the planetary interior (Kaula, 1979; Davies, 1984). Moreover, blanketing effect of a primary atmosphere (Hayashi et al., 1979; Sasaki, 1990) or a degassed atmosphere (Abe and Matsui, 1986; Zahnle et al., 1988) would raise the surface temperature of the Earth-size planets to be higher than the melting temperature. The primordial magma ocean was likely to be formed during accretion of terrestrial planets. In the magma ocean, if crystallized fractions were heavier than melt, they would sink. But if solidified materials were lighter than the melt (like anorthosite of the lunar early crust) they would float to form a solid shell surrounding the planet. (In an icy satellite, solidified water ice should easily float on liquid water because of its small density.) The surface solid lid would prevent efficient convective heat transfer and slow the interior cooling. Consider that the accretion of planetesimals still continues in this cooling stage. Shock disruption at planetesimal impact events may destroy the solid insulating layer. Even if the layer survives impacts, the surface layer is finally overturned by Rayleigh-Taylor instability, since accreting materials containing metals are heavier than the surface solidified lid of silicates.

Sasaki, Sho↗

The fate of accreted CNO elements in neutron star atmospheres - X-ray bursts and gamma-ray lines

The fate of incident C-12, N-14, and O-16 in accreting neutron star atmospheres is described. When the accreting material is stopped by Coulomb collisions with atmospheric electrons, all incoming elements heavier than helium thermalize at higher altitudes in the atmosphere than the accreting protons. The incoming protons and helium then destroy the elements via nuclear spallation reactions. A small fraction of the nuclear reactions cause nuclear excitation and subsequent gamma-ray emission. The probability for a nucleus to survive this bombardment depends on how long it spends in the hazardous region of the atmosphere. The fractions of incident C-12, N-14, and O-16 that survive proton bombardment are calculated as a function of the accretion rate, and the mass and radius of the neutron star. The subsequent paucity of CNO nuclei decreases hydrogen-burning rates in the deep regions of the atmosphere, thereby reducing the amount of helium available for the unstable nuclear flashes that cause type I X-ray bursts. The gamma-ray line emission from this collisional deceleration scenario is determined.

Bildstein, Lars↗

On the 'flip-flop' instability of Bondi-Hoyle accretion flows

A simple physical interpretation is advanced by means of an analysis of the shock cone in the accretion flows past a compact object and with an examination of the accretion-line stability analyses. The stability of the conical shock is examined against small angular deflections with attention given to several simplifying assumptions. A line instability is identified in the Bondi-Hoyle accretion flows that leads to the formation of a large opening-angle shock. When the opening angle becomes large the instability becomes irregular oscillation. The analytical methodology is compared to previous numerical configurations that demonstrate different shock morphologies. The Bondi-Hoyle accretion onto a compact object is concluded to generate a range of nonlinear instabilities in both homogeneous and inhomogeneous cases with a quasiperiodic oscillation in the linear regime.

Livio, Mario↗

The secondary outburst maximum of T Coronae Borealis - Implications for the physics of accretion disks

The hypothesis of Webbink (1976) that the accretion of a torus of matter onto a main-sequence star caused secondary maxima during the 1866 and 1946 eruptions of the recurrent nova T CrB is examined. Simple 1D calculations show that the accretion disk viscosity must increase with time to produce light curves resembling observations. It is inferred that the physical mechanism responsible for producing the viscous dissipation in the accretion disk has a fast growth rate and saturates to a viscosity parameter of order unity. The good agreement between parameters estimated from observations and those derived from a physical mechanism suggests that the growth rate instability identified by Balbus and Hawley (1991) is a promising source for accretion disk viscosity.

Cannizzo, John K.↗

Analysis of surface roughness generation in aircraft ice accretion

Patterns of roughness evolution have been studied analysis of high magnification video observations of accreting ice surfaces provided by the NASA Lewis Research Center. Three distinct patterns of surface roughness generation have been identified within the parametric regions studied. They include: Rime, Multi-Zone Glaze, and Uniform Glaze. Under most icing conditions, a brief period of transient rime ice growth was observed caused by heat conduction into the body. The resulting thin rime layer explains previously observed insensitivity of some ice accretions to substrate insensitivity of some ice accretions to substrate surface chemistry and may provide justification for simplifying assumptions in ice accretion sailing and modeling effects.

Hansman, R. J., Jr.↗

Linear stability analysis of spherical accretion flows onto compact objects

The steady state structure and linear stability of spherical accretion flows onto compact objects are investigated over a wide range of accretion rates (ARs) for a variety of cooling functions as a function of the ratio of specific heats (gamma). Both radial and nonradial shock perturbations are considered. The flows become more extended as AR decreases. The cooling function has a significant effect on the extended structure of settling solutions with gamma = 5/3. In contrast, the extended structure of settling solutions with gamma = 4/3 is nearly independent of the form of the cooling function. For both gamma = 4.3 and gamma = 5.3, radial shock oscillation in the fundamental and first overtone modes are destabilized in spherically extended accretion envelopes. The application of these results to postsupernova neutron star accretion flows and to luminosity oscillations in AM Her objects are discussed.

Houck, John C.↗

Heat transfer on accreting ice surfaces

Based on previous observations of glaze ice accretion on aircraft surfaces, a multizone model with distinct zones of different surface roughness is demonstrated. The use of surface roughness in the LEWICE ice accretion prediction code is examined. It was found that roughness is used in two ways: (1) to determine the laminar to turbulent boundary-layer transition location; and (2) to calculate the convective turbulent heat-transfer coefficient. A two-zone version of the multizone model is implemented in the LEWICE code, and compared with experimental convective heat-transfer coefficient and ice accretion results. The analysis of the boundary-layer transition, surface roughness, and viscous flowfield effects significantly increased the accuracy in predicting heat-transfer coefficients. The multizone model was found to significantly improve the ice accretion prediction for the cases compared.

Yamaguchi, Keiko↗

Properties of quasi-periodic oscillations in accreting magnetic white dwarfs

Previous studies of time-dependent accretion onto magnetic white dwarfs, in which the cooling was assumed to be due to bremsstrahlung emission, have shown that the accretion shock undergoes oscillations. However, when cyclotron cooling is also included, the oscillations are damped for sufficiently strong magnetic fields. Here we demonstrate that the oscillations can be sustained by accretion-fluctuation-induced excitations. The frequency of the QPOs are shown to increase quadratically with the magnetic field strength. We interpret the oscillations as a two-phase process in which bremsstrahlung cooling dominates in one half-cycle and cyclotron cooling in the other. Such a process may have very different consequences compared to a single-phase process where the functional form of the cooling is essentially the same throughout the cycle. If in the two-phase process damping occurs mainly in the cyclotron cooling half-cycle, there will be a universal effective damping factor which tends to suppress all oscillation modes indiscriminately. The oscillations of the accretion shock also could be a limit cycle process in which the system vacillates between two branches.

Wu, Kinwah↗

On the stability of irradiated accretion disks

The effects of external heating on the stability of hot accretion disks are studied in some detail. It is known that geometrically thin, optically thick, nonirradiated accretion disks have two distinct branches in the surface density mass-accretion rate plane: the upper branch is radiation pressure-dominated and is unstable against thermal and secular perturbations, while the lower one is gas-pressure-dominated and is stable. We show quite generally that, even when disks are strongly irradiated, the upper branch remains unstable and the lower branch remains stable; the lower branch, however, can become radiation pressure dominated, if the irradiating flux, F(irr), is kept constant. A stable, radiation pressure dominated state thus appears. If F(irr) changes in proportion to the mass-accretion rate through the disk, the instabilities associated with radiation pressure dominated disks cannot be removed. Some observational implications are discussed in the context of long-term variations of low-mass X-ray binaries.

Mineshige, Shin↗

Hard apex transition in quasi-periodic oscillators - Closing of the accretion gap

We propose that the 'hard apex' transition in the X-ray two-color diagrams for low-mass X-ray binaries exhibiting quasi-periodic oscillation is associated with closure of a gap between the accretion disk and the star. At low accretion rates, gas crosses this gap intermittently. However, when the mass accretion rate increases, the disk thickens and its inner edge touches the star, thus forming a boundary layer through which the gas flows steadily. This explanation is viable provided that the equation of state of nuclear matter is not significantly harder than the Bethe-Johnson I prescription. Accretion gap scenarios are possibly distinguishable from models which invoke a small magnetosphere around the neutron star, in that they preclude large stellar magnetic fields and associate the high-frequency (horizontal-branch) oscillations with different sites.

Biehle, Garrett T.↗