Search NASA⌕ Search

SEARCH · Search NASA

Results for “Alcohols”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Fluorinated ionic liquids as gas chromatographic stationary phases for the separation of volatile per- and polyfluoroalkyl substances

Background Here, the production of fluorinated organic compounds in the manufacturing, semiconductor, and pharmaceutical industries has increased exponentially over the past decade. This rapid growth has created an urgent need for efficient chromatographic platforms capable of selectively separating these compounds from complex mixtures, not only to support industrial quality control and waste management practices, but also to enable reliable environmental monitoring of volatile fluorinated contaminants. Conventional GC stationary phases lack the fluorophilic interactions needed for highly fluorinated analytes. Consequently, there is a clear demand for specialized stationary phases designed to improve chromatographic retention and selectivity for these compounds. Results Three stationary phases composed of fluorinated ionic liquids (ILs) with varied extent of fluorination were prepared to study fluorophilic interactions with fluorinated/non-fluorinated probe molecules by gas chromatography (GC). IL stationary phases featuring linear and branched perfluoroalkyl moieties, as well as a branched alkyl moiety, were systematically investigated. Chromatographic performance was examined using fluorinated compounds and their hydrocarbon analogs, including CF 3 -substituted aromatics, aliphatic alcohols, fluorotelomer alcohols (FTOHs), and perfluoroalkenes. Measurements on 5 m and 20 m columns revealed that the IL possessing branched alkyl provided stronger dispersive and hydrogen bonding interactions toward non-fluorinated aromatic and long-chain alcohols, whereas the fluorinated ILs enhanced retention of highly fluorinated FTOHs and perfluorodecene. Comprehensive two-dimensional GC (GC × GC), using a nonpolar primary column coupled with secondary columns featuring cross-bonded poly(trifluoropropylmethyl siloxane) (Rtx-200 ms), the branched fluorinated IL, or the branched non-fluorinated IL, highlighted complementary selectivity with the branched fluorinated IL providing the strongest interactions with fluorinated analytes. Significance These results demonstrate that fluorinated IL stationary phases are promising alternatives to conventional polysiloxane stationary phases for improving the separation of per- and polyfluoroalkyl substances and related fluorinated compounds. By correlating IL structure with fluorophilic interactions, this work establishes design principles for GC stationary phases that enable enhanced selectivity for highly fluorinated analytes while maintaining complementary interactions with non-fluorinated compounds.

Comprehensive two-dimensional GC↗
DOE OSTI2024

The Central Role of Oxo Clusters in Zirconium‐Based Esterification Catalysis

Oxo clusters are a unique link between oxide nanocrystals and Metal‐Organic Frameworks (MOFs), representing the limit of downscaling each of the respective crystals. Herein, the superior catalytic activity of clusters, compared to zirconium MOF UiO‐66 and nanocrystals is shown. Focus is on esterification reactions given their general importance in consumer products and the challenge of converting large substrates. Oxo clusters have a higher surface‐to‐volume ratio than nanocrystals, rendering them more active. For large substrates, for example, oleic acid, MOF UiO‐66 has negligible catalytic activity while clusters provide almost quantitative conversion, a fact we ascribe to limited diffusion of large substrates through the MOF pores. Clusters do not suffer from limited mass transfer and we also obtain high conversion in solvent‐free reactions with sterically hindered alcohols (hexanol, 2‐ethyl hexanol, benzyl alcohol, and neopentyl alcohol). The cluster catalyst can be recovered and shows identical activity when reused. The structural integrity of the cluster is confirmed using X‐ray total scattering and pair distribution function analysis. Moreover, when homogeneous zirconium alkoxides are used as catalysts, the same oxo cluster is retrieved, showing that oxo clusters are the active catalytic species, even in previously assumed homogeneously catalyzed reactions.

Pulparayil Mathew, Jikson↗
DOE OSTI2025

2,3-Butanediol recovery from fermentation broth using membrane pertraction

2,3-Butanediol (BDO) has gained immense interest for use as a platform chemical in the production of many important chemicals such as synthetic rubber, plasticizer, and octane boosters. Using BDO as a precursor for sustainable aviation fuel production may significantly reduce the carbon footprint of the airline industry. However, recovery of BDO is challenging due to its relatively low concentration (∼10 wt %) in fermentation broth and its high affinity for water. In this work, we developed a membrane pertraction process for BDO recovery from biomass derived fermentation broth. Different organic solvents such as hexanol and oleyl alcohol were investigated. With traditional solvent extraction, hexanol required a solvent to feed ratio of 10 to recover >90 % BDO, and oleyl alcohol could recover 35 % of BDO at the same ratio. BDO recovery of >90 % was demonstrated with pertraction; a BDO extraction rate of 15 g 1 m −2 h −1 was achieved using hexanol, and an extraction rate of 10 g 1 m −2 h −1 was achieved using oleyl alcohol. Impurities commonly found in fermentation broth did not affect the separation performance of the pertraction process. In conclusion, this work demonstrates pertraction as a low-footprint, scalable method for recovery of high-purity BDO from fermentation broth.

2,3 butanediol↗
DOE OSTI2024

Mechanistic Insights into the Electrochemical Oxidation of 5-Hydroxymethylfurfural on a Thin-Film Ni Anode

The electrochemical oxidation of alcohols is being explored as a favorable substitute for the oxygen evolution reaction owing to its capability to generate high-value products and lower overpotentials. Herein, we present a systematic investigation into the electrochemical oxidation of 5-hydroxymethylfurfural (HMF), a model biomass platform chemical, on a thin-film nickel catalyst, aiming to investigate the underlying reaction mechanism and shed light on the role of the catalyst’s microenvironment and phase on activity and product selectivity. Utilizing a combined experimental and computational approach, we demonstrate that NiOOH is the active phase for HMF oxidation. Additionally, we find a substantial impact of the electrochemical environment, particularly the electrolyte pH, on the reaction. Under highly alkaline conditions (pH = 13), higher activity for HMF oxidation is observed, accompanied by an increased selectivity toward 2,5-furandicarboxylic acid (FDCA) production. Conversely, a less alkaline environment (pH = 11) results in diminished HMF oxidation activity and a higher preference for the partial oxidation product 2,5-diformylfuran (DFF). Mechanistic insights from DFT studies reveal that geminal diols that are present under highly alkaline conditions undergo hydride transfer via HMFCA, while a shift to an alkoxide route occurs at a lower pH, favoring the DFF pathway. Hydride transfer energetics are also strongly affected by the surface Ni oxidation state. Finally, this integrated approach, bridging experimental and computational insights, provides a general framework for investigating the electrochemical oxidation of aldehydes and alcohols, thereby advancing rational design strategies in electrocatalysts for alcohol electro-oxidation reactions.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Base-Free Catalytic Transfer Hydrogenation of Alkyl Formates and Organic Esters at Mild Temperature

The pincer-ligated ruthenium complex ( iPr PN H P)Ru(CO)H 2 ( iPr PN H P = ( i Pr 2 PC 2 H 4 ) 2 NH) is an active catalyst for the transfer hydrogenation of alkyl formates (HCO 2 R) and organic esters (RCO 2 R′) to the corresponding alcohols under base-free reaction conditions at mild temperatures. Specifically, a range of alkyl formate esters were reduced to MeOH and the corresponding alcohols in high yields using ( iPr PN H P)Ru(CO)H 2 as the catalyst and isopropanol ( i PrOH) as the hydrogen donor at 30 °C. The first step in the process is the metal-catalyzed transesterification of the alkyl formate with i PrOH to generate isopropyl formate, which is then reduced. The use of i PrOH as the hydrogen donor is crucial. ( iPr PN H P)Ru(CO)H 2 can also catalyze the transfer hydrogenation of a broad range of organic esters, including cyclic, acyclic, heteroatom-substituted, and long-chain bio-derived esters, to the corresponding alcohols in good yields using ethanol (EtOH) as the hydrogen donor at 55 °C. Computational studies were used to elucidate the proposed pathway for alkyl formate reduction and the underlying reasons why i PrOH is the most effective hydrogen donor for alkyl formate reduction, while EtOH is optimal for organic ester reduction. Overall, this work describes a highly active catalyst for alkyl formate and organic ester transfer hydrogenation and provides mechanistic insight into the factors responsible for the strong catalytic performance. Finally, these findings will be valuable for designing catalysts for both transfer hydrogenation and related reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Insights into the mechanism of electrochemical chloride oxidation in ethanol from X-ray photoelectron spectroscopy, quiescent solution voltammetry, and rotating ring-disk electrodes

The wide availability of bio-derived alcohols provides the impetus to develop processes that convert them to valuable chemicals. The chloride ion is a redox mediator for electrocatalytic ethanol oxidation to 1,1-diethoxyethane (1,1-DEE) through an ethyl hypochlorite (EtOCl) intermediate, and this paper describes the chloride oxidation reaction (COR) to EtOCl on a glassy carbon (GC) electrode. Voltammetry measurements on a GC electrode in inert acetonitrile solvent combined with ex situ X-ray photoelectron spectroscopy (XPS) establish a Volmer step, where chloride ion from solution chemisorbs and is oxidized. In reactive ethanol solvent, ethanol adsorbs, and analyzing the current response in an LSV experiment supports a two-electron-transfer to form EtOCl, with chemisorption of the regenerated chloride. Koutecký–Levich (K–L) analysis on a rotating ring disk electrode (RRDE) shows that the kinetic rate constant of the COR in ethanol is on the order of 10 −8 cm s −1 , which is five orders of magnitude faster than the direct alcohol oxidation reaction in a kinetically limited regime. This hydrodynamic approach in understanding the electrochemistry of this non-aqueous system extends the possibilities for mediated electrocatalysis in neat alcohol solvents.

Van Daele, Ryan D. [University of Michigan, Ann Ar↗
DOE OSTI2024

Catabolic pathway acquisition by rhizosphere bacteria readily enables growth with a root exudate component but does not affect root colonization

Horizontal gene transfer (HGT) is a fundamental evolutionary process that plays a key role in bacterial evolution. The likelihood of a successful transfer event is expected to depend on the precise balance of costs and benefits resulting from pathway acquisition. Most experimental analyses of HGT have focused on phenotypes that have large fitness benefits under appropriate selective conditions, such as antibiotic resistance. However, many examples of HGT involve phenotypes that are predicted to provide smaller benefits, such as the ability to catabolize additional carbon sources. We have experimentally simulated the consequences of one such HGT event in the laboratory, studying the effects of transferring a pathway for catabolism of the plant-derived aromatic compound salicyl alcohol between rhizosphere isolates from the Pseudomonas genus. We find that pathway acquisition enables rapid catabolism of salicyl alcohol with only minor disruptions to the existing metabolic and regulatory networks of the new host. However, this new catabolic potential does not confer a measurable fitness advantage during competitive growth in the rhizosphere. We conclude that the phenotype of salicyl alcohol catabolism is readily transferable but is selectively neutral under environmentally relevant conditions. We propose that this condition is common and that HGT of many pathways will be self-limiting because the selective benefits are small.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Hybrid HEFA-HDCJ Process for the Production of Jet Fuel Blendstocks

The hydrotreatment of bio-oil derived from the pyrolysis and biocrude from hydrothermal liquefaction of lignocellulosic materials to produce hydrocarbons faces significant technological challenges, mainly due to the high reactivity and poor thermal stability of bio-oil, resulting in the formation of large quantities of coke. This problem has been addressed by existing PNNL patents with a two-step hydrotreatment technology in which the bio-oil is first stabilized with a noble hydrogenation metal (often Pt or Ru). Then, in the second step, the bio-oil is deoxygenated with a Ni-Mo or Co-Mo sulfide catalyst. The main problem with this approach is that the Pt/Ru catalysts deactivate easily in the presence of S or other impurities, which are commonly present in pyrolysis oils. In this project, we explored technological solutions to mitigate coke formation, avoiding the use of Pt/Ru catalysts. Our strategy is based on three actions: (1) Bio-oil stabilization in the presence of alcohols. In this project, we studied the stabilization with butanol. (2) the use of a cosolvent to solubilize the bio-oil. Because coke formation reactions are second-order reactions a reduction in the concentration of reactive bio-oil molecules. In this case, we used yellow greases as a co-solvent. (3) Separation of bio-oil reactive fractions. In this project, we studied the removal of water-soluble fractions. Our batch co-hydrotreatment studies confirmed that the addition of butanol and methanol and the blend with lipids effectively contributed to mitigating coke formation (reducing coke yield to about 1 wt.% %). The removal of sugars did not have a noticeable effect on the overall coke yield, suggesting that coke precursors are present in all bio-oil fractions. Our analytical work suggests that they may be concentrated in the water-insoluble/CH 2 Cl 2 insoluble fractions of pyrolysis oils. Although the technological strategies tested resulted in significant coke reductions, the levels achieved were not sufficiently low to ensure a reliable operation in continuous, fixed-bed trickle-bed reactors. Long runs of more than 100 hours (maximum: 255 h) of co-processing time on stream were achieved in a continuous 40 mL reactor. When the same test was conducted in a larger 400 mL reactor, pressure drop increases associated with coke formation were observed. This increase in coke formation could be due to larger temperature gradients in the bed. Hydrodeoxygenation tests in moving bed reactors and using more active hydrogenation catalysts (for example Ni) could lead to more reliable operations. Unfortunately, our team did not have access to such experimental setups. The technoeconomic analysis suggests that although alcohol use is an effective means to reduce coke formation, the use of alcohol increases production cost. Thus, its use needs to be minimized. A delicate balance needs to be found between the use of technological solutions that allow the reliable operation of the system (stabilization with Ni catalysts, use of small quantities of solvents, processing in moving bed reactors) with a tolerable level of coke formation for the hydrodeoxygenation reactor used and that result in minimum production costs.

09 BIOMASS FUELS↗
DOE OSTI2024

Ultrathin Boron Growth onto Nanodiamond Surfaces via Electrophilic Boron Precursors

Diamond as a templating substrate is largely unexplored, and the unique properties of diamond, including its large bandgap, thermal conductance, and lack of cytotoxicity, makes it versatile in emergent technologies in medicine and quantum sensing. Surface termination of an inert diamond substrate and its chemical reactivity are key in generating new bonds for nucleation and growth of an overlayer material. Oxidized high-pressure high temperature (HPHT) nanodiamonds (NDs) are largely terminated by alcohols that act as nucleophiles to initiate covalent bond formation when an electrophilic reactant is available. In this work, we demonstrate a templated synthesis of ultrathin boron on ND surfaces using trigonal boron compounds. Boron trichloride (BCl 3 ), boron tribromide (BBr 3 ), and borane (BH 3 ) were found to react with ND substrates at room temperature in inert conditions. BBr 3 and BCl 3 were highly reactive with the diamond surface, and sheet-like structures were produced and verified with electron microscopy. Surface-sensitive spectroscopies were used to probe the molecular and atomic structure of the ND constructs’ surface, and quantification showed the boron shell was less than 1 nm thick after 1–24 h reactions. Observation of the reaction supports a self-terminating mechanism, similar to atomic layer deposition growth, and is likely due to the quenching of alcohols on the diamond surface. X-ray absorption spectroscopy revealed that boron-termination generated midgap electronic states that were originally predicted by density functional theory (DFT) several years ago. DFT also predicted a negative electron surface, which has yet to be confirmed experimentally here. The boron-diamond nanostructures were found to aggregate in dichloromethane and were dispersed in various solvents and characterized with dynamic light scattering for future cell imaging or cancer therapy applications using boron neutron capture therapy (BNCT). The unique templating mechanism based on nucleophilic alcohols and electrophilic trigonal precursors allows for covalent bond formation and will be of interest to researchers using diamond for quantum sensing, additive manufacturing, BNCT, and potentially as an electron emitter.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Stress corrosion in titanium alloys and other metallic materials

Multiple physical and chemical techniques including mass spectroscopy, atomic absorption spectroscopy, gas chromatography, electron microscopy, optical microscopy, electronic spectroscopy for chemical analysis (ESCA), infrared spectroscopy, nuclear magnetic resonance (NMR), X-ray analysis, conductivity, and isotopic labeling were used in investigating the atomic interactions between organic environments and titanium and titanium oxide surfaces. Key anhydrous environments studied included alcohols, which contain hydrogen; carbon tetrachloride, which does not contain hydrogen; and mixtures of alcohols and halocarbons. Effects of dissolved salts in alcohols were also studied. This program emphasized experiments designed to delineate the conditions necessary rather than sufficient for initiation processes and for propagation processes in Ti SCC.

Harkins, C. G.↗
NASA NTRS1975

Study of spark chambers filled with various gas mixtures

The performance is reported of the four layer spark chamber filled with alcohol vapors at 45 torr, very pure neon at 1 to 4.6 atm and also filled with only very pure neon at 1 to 2.9 atm. The curves of particles recording efficiency vs. the delay time in the chamber pulse supply and the number of operations are given. This efficiency decreases with an increase in the delay time; any addition of alcohol vapors increases the drop in the efficiency with time. However, alcohol vapors improve the localization of tracks along which the particles move and make them three to four times as narrow compared to the tracks inside the chamber filled with very pure neon.

Akopyan, G. S.↗
NASA NTRS1978

Ambient cure polyimide foams

Flame and temperature resistant polyimide foams are prepared by the reaction of an aromatic dianhydride, (pyromellitic dianhydride) with an aromatic polyisocyanate, (polymethylene polyphenylisocyanate), in the presence of an inorganic acid and furfuryl alcohol. Usable acids include dilute sulfuric acid, dilute nitric acid, hydrochloric acid, polyphosphoric acid, and phosphoric acid, with the latter being preferred. The dianhydride and the isocyanate in about equimolar proportions constitute about 50% of the reaction mixture, the rest being made up with the acid and the alcohol in a ratio of about 1:10. An exothermic reaction between the acid and the alcohol provides the heat necessary for the other components to polymerize without recourse to external heat sources. The mixture can be sprayed on any surface to form polymeric foam in locations where the application of heat is not practical or possible, for instance, between walls or on mine tunnel surfaces.

Sawko, P. M.↗
NASA NTRS1978

Directional errors of movements and their correction in a discrete tracking task

Subjects can correct their own errors of movement more quickly than they can react to external stimuli by using three general categories of feedback: (1) knowledge of results, primarily visually mediated; (2) proprioceptive or kinaesthetic such as from muscle spindles and joint receptors, and (3) corollary discharge or efference copy within the central nervous system. The effects of these feedbacks on simple reaction time, choice reaction time, and error correction time were studied in four normal human subjects. The movement used was plantarflexion and dorsiflexion of the ankle joint. The feedback loops were modified, by changing the sign of the visual display to alter the subject's perception of results, and by applying vibration at 100 Hz simultaneously to both the agonist and antagonist muscles of the ankle joint. The central processing was interfered with when the subjects were given moderate doses of alcohol (blood alcohol concentration levels of up to 0.07%). Vibration and alcohol increase both the simple and choice reaction times but not the error correction time.

Jaeger, R. J.↗
NASA NTRS1985

Diffusely reflecting paints including polytetrafluoroethylene and method of manufacture

The invention pertains to a high diffuse, reflective paint comprising an alcohol soluble binder, polytetrafluoroethylene (TFE) and an alcohol for coating a substrate and forming an optical reference with a superior Lambertian characteristic. A method for making the paint by first mixing the biner and alcohol, and thereafter by mixing in outgassed TFE is described. A wetting agent may be employed to aid the mixing process.

Schutt, J. B.↗
NASA NTRS1986

The discrimination between crude-oil spills and monomolecular sea slicks by an airborne lidar

Airborne lidar measurements were performed over a deployed monomolecular oleyl alcohol surface film ('slick'), the physicochemical characteristics of which are known to be similar to biogenic organic compounds secreted by plankton and fish, and adjacent 'clean' sea surfaces in the North Sea. In the presence of the slick, the suppression of the Raman backscatter at 381 nm and of two spectral bands indicative of water column fluorescent organic material at 414 and 482 nm were observed. This effect is explained by two possible mechanisms giving rise to a modification of the transmission or coupling of the laser beam into the water column: (1) the damping of capillary and short gravity water waves by the oleyl alcohol slick, and (2) the modification of the uppermost water layer by the oleyl alcohol film. The results obtained in the presence of a slick are compared with data measured over a Murban crude-oil spill with the same lidar system off the coast of the U.S.A. The consequences of the lidar-monomolecular film experiments with regard to the remote detection of crude-oil spills and oil-thickness measurements with an airborne laser fluorosensing system will be discussed.

Huehnerfuss, H.↗
NASA NTRS1992

Stereoselectivity in Polyphenol Biosynthesis

Stereoselectivity plays an important role in the late stages of phenyl-propanoid metabolism, affording lignins, lignans, and neolignans. Stereoselectivity is manifested during monolignol (glucoside) synthesis, e.g., where the geometry (E or Z) of the pendant double bond affects the specificity of UDPG:coniferyl alcohol glucosyltransferases in different species. Such findings are viewed to have important ramifications in monolignol transport and storage processes, with roles for both E- and Z-monolignols and their glucosides in lignin/lignan biosynthesis being envisaged. Stereoselectivity is also of great importance in enantiose-lective enzymatic processes affording optically active lignans. Thus, cell-free extracts from Forsythia species were demonstrated to synthesize the enantiomerically pure lignans, (-)-secoisolariciresinol, and (-)-pinoresinol, when NAD(P)H, H2O2 and E-coniferyl alcohol were added. Progress toward elucidating the enzymatic steps involved in such highly stereoselective processes is discussed. Also described are preliminary studies aimed at developing methodologies to determine the subcellular location of late-stage phenylpropanoid metabolites (e.g., coniferyl alcohol) and key enzymes thereof, in intact tissue or cells. This knowledge is essential if questions regarding lignin and lignan tissue specificity and regulation of these processes are to be deciphered.

Lewis, Norman G.↗
NASA NTRS1991

Formation of Lignans(-)-Secoisolariciresinol and (-)-Matairesinol with Forsythia intermedia Cell-Free Extracts

In vivo labeling experiments of Forsythia intermedia plant tissue with [8-(C-14)]- and [9,9-(2)H2,OC(2)H3]coniferyl alcohols revealed that the lignans, (-)-secoisolariciresinol and (-)-matairesinol, were derived from two coniferyl alcohol molecules; no evidence for the formation of the corresponding (+)-enantiomers was found. Administration of (+/-)-[Ar-(H-3)] secoisolariciresinols to excised shoots of F.intermedia resulted in a significant conversion into (-)-matairesinol; again, the (+)-antipode was not detected. Experiments using cell-free extracts of F.intermedia confirmed and extended these findings. In the presence of NAD(P)H and H2O2, the cell-free extracts catalyzed the formation of (-)- secoisolariciresinol, with either [8-(C-14)]- or [9,9-(2)H2,OC(2)H3]coniferyl alcohols as substrates. The (+)- enantiomer was not formed. Finally, when either (-)-[Ar-(H-3)] or (+/-)-[Ar-(H-2)]secoisolariciresinols were used as substrates, in the presence of NAD(P), only (-)- and not (+)-matairesinol formation occurred. The other antipode, (+)-secoisolariciresinol, did not serve as a substrate for the formation of either (+)- or (-)-matairesinol. Thus, in F.intermedia, the formation of the lignan, (-)-secoisolariciresinol, occurs under strict stereochemical control, in a reaction or reactions requiring NAD(P)H and H2O2 as cofactors. This stereoselectivity is retained in the subsequent conversion into (-)-matairesinol, since (+)-secoisolariciresinol is not a substrate. These are the first two enzymes to be discovered in lignan formation.

Umezawa, Toshiaki↗
NASA NTRS1998

Forced Convection Boiling and Critical Heat Flux of Ethanol in Electrically Heated Tube Tests

Electrically heated tube tests were conducted to characterize the critical heat flux (transition from nucleate to film boiling) of subcritical ethanol flowing at conditions relevant to the design of a regeneratively cooled rocket engine thrust chamber. The coolant was SDA-3C alcohol (95% ethyl alcohol, 5% isopropyl alcohol by weight), and tests were conducted over the following ranges of conditions: pressure from 144 to 703 psia, flow velocities from 9.7 to 77 ft/s, coolant subcooling from 33 to 362 F, and critical heat fluxes up to 8.7 BTU/in(exp 2)/sec. For the data taken near 200 psia, critical heat flux was correlated as a function of the product of velocity and fluid subcooling to within +/- 20%. For data taken at higher pressures, an additional pressure term is needed to correlate the critical heat flux. It was also shown that at the higher test pressures and/or flow rates, exceeding the critical heat flux did not result in wall burnout. This result may significantly increase the engine heat flux design envelope for higher pressure conditions.

Meyer, Michael L.↗